Documentos de Académico
Documentos de Profesional
Documentos de Cultura
MILESTONE 1997
Presenting its successor: the Ritschie. Once again with many innovative ideas, like the first child trailer brake system suitable for serial production. Since 1997 there have also been new features in the form of the 5-point harness with its own childproof catch, plus the universally usable Weber baby shell. With the first skater set and a third fully functional wheel introduced in 2000, you can also jog and skate with the Ritschie.
MILESTONE 1992
The Ritschie1 appears on the market. Its innovative features at the time became and still are standard in part to many other trailers: the fixed three-layer aluminium chassis and the first suspension in a child trailer for more safety and comfort, the two-part bicycle hitch and a touring top hard shell cover for changing your child trailer into a load carrier.
MILESTONE 2003
The Monoporter is introduced and promptly wins the ISPO Brand New Award. In the same year Weber presents the Ritschie SE Sport Edition. The Ritschie S BIKER is the winner of the big test by Stiftung Warentest.
MILESTONE 2008
PAgE 1
CONTENTS:
Ritschie child trailers Weber load carriers Weber baby shell Monoporter luggage trailers Weber hitch systems Polygons Weber conversion kits PAgE 2
THE RITSCHIE
Ritschie BIKER
ExTREMELY SAfE
When it comes to the safety of your children, there are no compromises at Weber! The Ritschie thus offers extensive features as standard: Safety chassis with all-round impact protection. Comprehensive back protector due to fixed padded seat with integrated aluminium reinforcement. Rollover protection due to roof braces, seat and patented safety padded roof forming a composite. good road position and low tendency to overturn. Safety pennant and 6 reflectors in total.
PAgE 3
Overall width Overall height Overall length with drawbar Head room/ leg room Interior width (max) Packing dimensions (l x w x h) Tare weight Permitted payload (max)
820 mm 1020 mm 1360 mm 630 mm / 600 mm 700 mm 800 x 720 x 410 mm approx. 16.5 kg 50 kg
Ritschie SKATER
fEATURES
Extremely stable three-layer aluminium chassis. Undercarriage cushioned by elastomers. Freely insertable head support + head support safety device. 5-point harness with KidSafe belt catch. Adjustable padded seat with rest position. Waterproof canopy with large, tinted windows (SPF 16). The material keeps out 95% of harmful UV radiation. Rain cover plus separate insect net. Cotton fleece cover, moisture-wicking, washable & contaminant-free in accordance with kotex standard. High quality 16SDSq plastic wheels with stainless steel axle, each with twin industrial bearings. Lockable Weber drawbar incl. E hitch Quick releases for drawbar and wheels. Dual disc brake as a parking brake and service brake when jogging or skating. Rear luggage space. Can be folded down to chassis size without tools.
Can be folded down to chassis size quickly and without tools: 800 x 720 x 410 mm.
The Weber Ritschie is available in the basic version Ritschie BIKER or as the sport version Ritschie SKATER with extra 3rd wheel, adjustable push bar and patented Weber steering. Both versions come in a choice of the canopy colours yellow and orange. Of course each version can be retrofitted to make it a SKATER. You also have the option of leaving out integrated features from the basic versions (e.g. the disc brakes). More information about the Ritschie: weber-products.de/ ritschie PAgE 4
SAfETY fIRST
The affordable version of the popular Ritschie concept, with equally high safety and comfort features:
Safety chassis with all-round impact protection. Comprehensive back protector due to fixed padded seat with integrated aluminium reinforcement. Rollover protection due to roof braces, seat and patented safety padded roof forming a composite. good road position and low tendency to overturn. Versatile use due to add-on sets Quality as a guarantee for value retention
PARKING BRAKE
The standard parking brake for the Ritschie easy and the Ritschie Touring is a simple and safe brake. It is operated by foot and acts on both wheels.
PAgE 5
Overall width Overall height Overall length with drawbar Volume Tare weight Permitted payload (max)
Ritschie TOURING
RITSCHIE TOURING
The Touring Top gives you the option of also using your Ritschie as a load carrier after or during your children's early years. Ideal for everyday use and for trips on holiday.
Easy to fit plastic cover Cargo protected from water Cargo secure, as cover can be locked. Opened cover stays in position by means of a pneumatic spring Practical roof railing to tie down additional luggage
SPECIAL DESIGNS
Special customised designs of load carriers can be produced for you on request using our components, e.g. for transportation in factories or for bike couriers. Illustration: ZARGES box with interior dimensions 750x550x380mm and plastic box with springmounted Weber-chassis, removable Weber low/ hand drawbar, foldable 2-leg stand.
PAgE 6
got a lot to pack? No problem with the big Ritschie rear pannier. The shoulder strap allows it to be used as an ideal, mobile rucksack. Available in yellow or orange for all Ritschies. (Subject to alterations)
PAgE 7
fOR fASTENING SUN SHADES EASILY When it gets too bright for your little ones: these simple clips can be used to attach all conventional sun shades quickly and easily. (Shades available in specialist shops and DIY stores)
For Ritschies built from 2003 onwards, the Ritschie easy or as a replacement: the 6-part seat cover set made of cotton for retrofitting. Washable, moisturewicking and contaminant-free in accordance with kotex standard.
This set acts as a lateral head restraint for your children. It is inserted into the backrest of the Ritschie and fastened with a safety catch without much effort. (Standard on Ritschie-Biker and Ritschie-Skater). The head restraint safety device is also available separately for retrofitting.
ELASTOMER SPRINGS
To make the Ritschie softly sprung, elastomer springs are located between the wheels and chassis. The Ritschie comes with black elastomer springs as standard, which are designed for a payload of up to 50 kg. When small children are being transported, we recommend the softer springs. Red elastomer springs are suitable for weights up to 25 kg.
PAgE 8
SAfE EN ROUTE
Children in a trailer must always be buckled up. In order that they remain so during the journey too, the baby shell is equipped with the Weber KidSafe belt catch. This special design cannot be opened by children on their own.
Use 1st to 9th month, up to 9 kg weight Dimensions (l x w x h) 680 x 270 x 190 mm Weight 550 g Material EPP (expanded polypropylene) Cover fabric cotton fleece or textile leather Meets EU standards EN 71-1, 71-2, 71-3, 12790 re. 5.8.7
fEATURES
Shell made of high quality and contaminant-free EPP foam material. Space-saving shape only 27 cm wide. Minimum weight only 550 g. Adjustable 3-point harness. Childproof KidSafe belt catch. Durable and washable (fleece) cover in a choice of cotton or textile leather. Fleece and microfibre cover contaminant free in accordance with kotex Standard. Moisture-wicking. Can be used in nearly all conventional child trailers. Simple installation without tools.
SUPPORT PAD:
In order to be able to safely fasten your Weber baby shell in place, on some trailers it is necessary to use a support pad in the foot well. The blow-up support pad fulfils this task ideally, weighs almost nothing and can be stored without taking up much space.
THE MONOPORTER
THE SPACE-SAVER
The Monoporter can be folded to the size of a suitcase with a few simple hand movements. It will therefore fit into any car boot and can be checked in at the airport as normal baggage.
PAgE 11
Suitable pulling wheel sizes Overall width Packing dimensions (l x w x h) Trailer length Weight Permitted payload (max)
Fig. with luggage bag (accessories)
24 - 28 inch with 20 poss. surcharge 440 mm 760 x 440 x 150 mm approx. 1,500 mm 5.75 kg 25 kg
fEATURES
20SDSq wheel with hollow rim with eyelets and stainless steel spokes, hub with twin industrial bearings and stainless steel axle. Minimal weight of 5.75 kg. 25 kg payload at optimum operating safety. Lockable Weber CE hitch. Snap on fastening system. Sturdy aluminium single tube frame. Scratch-resistant powder coating. Rear end suspension. Can be folded to fit in boot. Special versions with wider forks for tandems & folding bikes or 20" wheels
The practical bag for transporting your monoporter. Ideal for travel, stowing or keeping it clean when packed.
To hold your load securely in place laterally: the practical railing. Simply click into the standard push-in layout. Fits into the Monoporter carry bag when folded.
SPECIAL DESIGNS
Special customised designs for carrying loads on the Monoporter can be produced for you on request using our components. Illustration: Auer plastic box with outer dimensions 400 x 600 x 330mm.
PAgE 13
Connecting the Monoporter precisely and quickly with the pulling wheel: the Mono hitch pieces. Once fitted with the quick release skewer or the screw axle, they remain on the wheel.
Connecting the Monoporter precisely and quickly with the pulling wheel: the Mono hitch pieces. Easy to remove wheel due to separate hitch screwed directly onto frame.
For extra wide dropouts, where the standard quick release skewer could be too short. Can be used for a clamping length of 160 175mm.
PAgE 14
Hitch
Connector
The Weber hitch in particular left a good impression. It is also available combined with a bike stand, which ensures stability when parking. Stiftung Warentest 5/03
PAgE 15
... finished!
PAgE 12 SEITE 16
B HITCH
HITCH WITH INTEGRATED BIKE STAND
E HITCH
LIGHT AND COMPATIBLE HITCH WITH ADDITIONAL SAfETY CABLE
EP HITCH
SPECIAL VERSION Of THE E HITCH fOR USE ON WHEELS WITH PLETSCHER COMP KICKSTAND
Bike hitch with integrated bike stand For 26" and 28SDSq wheel size Up to 80 kg tensile load For Weber bayonet catch For child transportation Height of stand base adjustable Weight: 510 g Special feature: gently fastened to frame with tightening strap.
Bike hitch for fitting onto dropout For all wheel sizes Up to 80 kg tensile load For Weber bayonet catch For child transportation Safety cable Weight: 192 g Special feature: Very light and compatible with nearly all frame designs.
Bike hitch is screwed onto the frame tube from inside. For all wheel sizes Up to 80 kg tensile load For Weber bayonet catch For child transportation
PAgE 17
EH HITCH
SPECIAL VERSION Of THE E HITCH fOR USE ON WHEELS WITH HEBIE REAR STAND 661/662
ER HITCH
SPECIAL VERSION Of THE E HITCH -USED ON WHEELS WITH ADJUSTABLE ROHLOff DROPOUT
EL HITCH
THE LIGHT VERSION Of THE TRIED AND TESTED E HITCH
Bike hitch for fitting to dropouts with KSA 40 stand fastening For all wheel sizes Up to 80 kg tensile load For Weber bayonet catch For child transportation Weight: 210 g Assembly:
Bike hitch for fitting directly to the movable Rohloff dropout For all wheel sizes Up to 80 kg tensile load For Weber bayonet catch For child transportation Weight: 221 g Assembly:
Bike hitch for fitting to the dropout For all wheel sizes Up to 40 kg tensile load For Weber bayonet catch Not for child transportation
PAgE 18
CE HITCH
TWO-SIDED BIKE HITCH fOR SINGLE WHEEL TRAILERS AND WEBER STROLLER HITCH
CR HITCH
SPECIAL VERSION Of THE E HITCH ESPECIALLY fOR ROHLOff GEAR HUBS
H HITCH
fOR CARGO TRAILERS fOR fASTENING TO THE SADDLE SUPPORT
Double bike hitch for fitting to the dropout For all wheel sizes Up to 40 kg tensile load For Weber bayonet catch Not for child transportation except with the Weber stroller hitch Weight: 192 g Special feature: Two-sided hitch Special versions available: CR version - see right C+ version: for Rohloff dropouts with integrated CE hitch
Double bike hitch for fitting to movable Rohloff dropout Also with all hub types (e.g. SRAM hubs with Clickbox) Up to 40 kg tensile load Not for child transportation Weight: 170 g Special feature: Easy to remove wheel due to separate hitch screwed directly onto frame.
Bike hitch for fitting to the saddle support For all wheel sizes Up to 40 kg tensile load For Weber bayonet catch Not for child transportation
Weight: 435 g Special feature: The tightening belt makes it very twist-resistant and at the same time gentle for the saddle support.
ehe unten)
PAgE 19
M HITCH
fOR ROLLER CASES! fASTENED TO THE LUGGAGE CARRIER WITH ANTI-TIPPING DEVICE Manufacturer Shimano Shimano Bike hitch for fitting to the luggage carrier For all wheel sizes Up to 40 kg tensile load With anti-tipping device Not for child transportation Shimano Shimano Shimano Shimano Shimano Shimano SRAM Weight: 485 g Special feature: We supply this hitch with a new subcarrier, which can be fitted to many luggage carriers with support clamps. SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM SRAM Colour code brown yellow white silver grey black dark green dark blue blue red yellow green dark brown turquoise light purple white purple orange Type 5L 5R 6L 6R 7L 7R 8L 8R 15 L 15 R 30 L 30 R 67 L 67 R 75 R 90 180 L 180 R
POLYGON INSERTS
fOR HITCHING TO DIffERENT BIKE MODELS WITH INTERNAL GEAR HUBS We have listened to the request of many customers who want flexible products that can be added to. A large assortment of special polygon inserts is available, especially for Shimano and SRAM internal gear hubs. The polygon inserts, which grip onto the dropout on the frame, protect the gears and the Weber hitch from twisting. The existing anti-twist device is simply replaced by the right Weber polygon insert when fitting a Weber hitch. Just specify the type and colour code.
ochre brown 75 L
More polygon inserts For fitting the E and CE hitch, if the frame is recessed at the dropout or add-on parts (e.g. disc brake) have to be bridged.
13mm 8mm
15mm
PAgE 20
Information about the assembly principle for B and H hitches: A stainless steel band 4 is placed around the frame tube or saddle support 5 and tightened with a screw connection against a so-called prism adaptor 6. The advantage is an extremely twistresistant connection, a bigger diameter area and protection of the frame/saddle support against being crushed.
4 6 5
PAgE 21
Information about the assembly principle for E, EL, CE, CR hitches: The hitches 1 are fixed in place with the quick release skewer or the axle nut on the dropout. The so-called Polygon insert 2, which grips into the dropout3 on the frame, protects the hitch from twisting downwards and is used to set the angle of the hitch. We have all the appropriate special polygon inserts for Shimano and SRAM internal gear hubs.
3 1 2
PAgE 22
WWW.WEBER-PRODUCTS.DE
2010 Weber Technik gmbH Errors & changes excepted! Design: www.atai.de Photos: Rudi Schedl; Heidi Frank; Adam Wist; Max Semsch