Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Evening Lecture
ANTI CORROSION BEHAVIOR OF 3 TYPES OF HOT-DIP ZINC ALLOY COATED STEEL SHEET IN CORROSIVE CONDITIONS
by Shinji Kamura Nisshin Steel Asia, Singapore
Thursday, 15 March 2012 6.30 pm to 9.30 pm Singapore Polytechnic Dover Road, Singapore School of Architecture & the Built Environment Block W5, Room W513 Sponsor
6:00 pm Registration 6:30 pm ANTI CORROSION BEHAVIOR OF 3 TYPES OF HOT-DIP ZINC ALLOY COATED STEEL SHEET IN CORROSIVE CONDITIONS by Mr Shinji Kamura Nisshin Steel Asia,Singapore PDUs: TBA 8:20 pm Question & Answer STUs: TBA 8:30 pm Buffet Dinner 9:30 pm End Venue Singapore Polytechnic, Dover Road, Singapore 139651 School of Architecture & the Built Environment, Architectural Design & Resource Centre (ADRC) Block W5, Room W513
Location of Blk W5
Topic: ANTI CORROSION BEHAVIOR OF TYPES OF HOT-DIP ZINC ALLOY COATED STEEL SHEET IN CORROSIVE CONDITIONS
Corrosion behavior of hot-dip Zn-alloy coated steel sheets [hot-dip Zn-5%Al alloy coated steel sheet (GF), hot-dip Zn-6%Al-3%Mg coated steel sheet (ZAM) and hot-dip Zn-55%Al alloy coated steel sheet (GL)] have been investigated and compared with a hot-dip Zn coated steel sheet (GI) in salt spray test. Under Salt spray test conditions, each coated steel sheet exhibited more advanced corrosion in cut end portions than in flat portions. Upon comparing the cut end portions of various types of sheets, the ZAM specimen exhibited better corrosion resistance than that of the GI and GF specimens. As the test time elapsed, the entire cut end portions of the ZAM specimens were considered to be covered by fine and dense zinc corrosion products containing Mg and/or Al, resulting in better corrosion resistance. In the GL specimen, it was recognized a considerable reduction of corrosion resistance in the cut end portions as compared to the flat portions. Fe rust (red rust) was formed on the cut end portions due to corrosion of the steel substrate, which is likely to have facilitated corrosion of the coating layer.
Corrosion behavior of ZAM has been investigated and compare with post hot- dip galvanized products (HDZ 55 : JIS H 6841) in salt spray test. The ZAM specimens exhibited better corrosion resistance with only 1/6 coating weight of post hot dip galvanized products. (From results of various accelerated corrosion tests) As anti-rust technology that can replace post hot dip galvanized products, the certification for the architecture execution technology and the technology examination has been obtained at the Building Center of Japan (BCJ) and the construction technology examination has been obtained at the Civil Engineering Research Center. (Applies to : ZAM coating weight symbol 120)
Anti-chemical performance of ZAM has been investigated and compare with GI and GL in ammonia water. The ZAM specimen exhibited better ammonia resistance (Corrosion loss) than that of the GI specimen or the GL specimen. (Corrosion loss : After immersion for 24 hours in 5% ammonia water at 22)
REGISTRATION FORM
Registration fees: SSSS Member Non-SSSS Member & Guest $10 per participant $30 per participant
Registration fees include buffet dinner. First-come-first-served; 70 seats only. (Corporate Member may nominate up to 3 staff at member rate.) Participants Name:
(1) (2) (3)
Contact Number:
Registration details:
Company Name: _________________________________________________________ Mailing Address: _________________________________________________________ Tel: _________________ Mobile: ___ Fax: ___________________
Email: __________________________
Payment: Please make crossed cheque payable to Singapore Structural Steel Society. Cheque No: Applicants Signature: Amount: Date:
Confirmation of registration is upon receipt of full payment by SSSS only. Cancellation Policy: SSSS reserves the right to cancel Evening Lecture without prior notice due to unforeseen circumstances. There will be no refund in the event of no-show or cancellation by the participant. Contact Details: Please send your completed registration form and registration fees to: The Secretariat, Singapore Structural Steel Society, 1 Liang Seah Street #02-11 Liang Seah Place, Singapore 189022 T 6337 0338 F 6336 2583 E secretariat@ssss.org.sg W www.ssss.org.sg