Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ASNT Welcomes You to the 16th Annual Research Symposium at the Orlando Wyndham Resort in Orlando, Florida
Research Council and National Program Chair Glenn Light, Southwest Research Institute
ASNT invites you to get involved with the Society by joining the ASNT Research Council. By volunteering, you have the opportunity to enhance ASNT and impact the Research Councils activities.
General Information
Registration Hours Monday 26 March Tuesday 27 March Wednesday 28 March Thursday 29 March 8:00 am7:30 pm 8:00 am5:00 pm 8:00 am5:00 pm 8:00 am12:00 pm Committee Meetings ASNT committee meetings are open to all conference attendees unless otherwise indicated. Improve your industry and NDE technology knowledge. Get involved with ASNTs Councils: Technical and Education, Research, Certification Management or Section Operations. Dress Comfortable business attire is appropriate for most of the Spring Symposium events. Although jackets are not required for the sessions, they are advisable because the rooms are typically cool. Spouse/Companion Hospitality Suite Spouses/Companions can visit the complimentary Hospitality Suite for continental breakfast, MondayThursday mornings, 8:3010:00 am.
Exhibit Hours Monday 26 March 5:008:00 pm (Welcome Reception) Tuesday 27 March 11:00 am4:00 pm What does my badge permit me to attend? Full conference badges permit attendance to the Research Symposium Program, Welcome Reception and Exhibits. One-day badges permit attendance to the Research Symposium Program and Exhibits only on the day specified. Separate registration fees and tickets are required for the Short Courses. Short Course tickets are good only for the Short Course designated on the ticket. You may attend open committee meetings of your choice. Show only passes are complimentary and a badge is required to enter the exhibit hall.
Recertification Information
Recertification points are required to apply for ASNT Level III certification renewal. Attendance at any of the research programs technical sessions earn ASNT Level III recertification points at the rate of 1 point per 6 contact hours under the 6-point system and 1 point per 3 contact hours under the 25-point system. To document your time in these sessions use this on site program to record your attendance. For personnel renewing prior to 1 May 2009 under the 6-point system, the point value per presentation is the lower value shown. For personnel renewing after 1 May 2009 under the 25-point system, the point value per presentation is the higher value shown. Each presentation you attend will need a signature from the session chair or session monitor. Credit will only be given for one paper per time slot. Attendance at the Short Courses earn ASNT Continuing Education Units (CEUs) at the rate of 1 point per 4 contact hours. CEU fees are included in the course fees. All required documentation for these CEUs will be provided at the course. All point amounts are subject to the approval of ASNTs Technical Services Department. If contact hours are not met as scheduled fewer points may be awarded. Proper documentation is required to receive points. For more information on recertification or CEUs, visit our website at www.asnt.org, or contact ASNT Technical Services Department at 800/222-2768 for the US & Canada and 614/274-6003 for all other callers.
Keynote Address
Transformation of Air Power Through Nondestructive Testing and Evaluation
Warren M. Boley, Jr., Vice President, Operational Military Engine Programs Pratt & Whitney/Military Engines
Room: Jasmine
.13/.26pts.
Infrastructure Evaluation
Chairs: S. Alampalli, NYSDOT; A. Aref, SUNY at Buffalo Room: Magnolia
Evaluation of Advanced NDI Techniques for Detection of Manufacturing Induced Anomalies in Aircraft Engine Components
D. Kerman, FAA; L. Brasche, Iowa State University
.07/.14pts.
9:30 am 9:30 am 9:55 am 9:55 am 10:20 am 10:45 am 11:10 am 10:20 am 10:45 am 11:10 am
2
.07/.14pts.
Asset Management of Force Mains of New York City Department of Environmental Protection
A. Agrawal, K. Ramalingum, CCNY; S. Rozelman, F. Kulcsar, N. Farooqi, New York City Department of Environmental Protection
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
Infrastructure NDT
Chairs: H. Ghasemi, FHWA; M. Ettouney, Weidlinger Associates, Inc.
Room: Jasmine
Room: Magnolia
1:30 pm
.07/.14pts.
.07/.14pts.
1:55 pm
.07/.14pts.
.07/.14pts.
2:20 pm 2:20 pm
.07/.14pts.
.07/.14pts.
2:45 pm 2:45 pm
.07/.14pts.
.07/.14pts.
Room: Jasmine
Room: Magnolia
3:25 pm 3:25 pm 3:50 pm 3:50 pm 4:15 pm 4:15 pm 4:40 pm 4:40 pm 5:05 pm 5:05 pm
4
.07/.14pts.
.07/.14pts.
.07/.14pts.
Initial Results of Applying EMAT Technology to Multi-Stranded, LightWeight, Overhead Power Conductors
W. Ellingson, Argonne National Laboratory; R. Alers, SonicSensors Inc; K. Amin, H. Deve, 3M Corporation
.07/.14pts.
.07/.14pts.
Pipeline NDE
Chair: L. Udpa, Michigan State University
Room: Jasmine
NDT Challenges in a Hostile Environment B. Girrell, Microline Technology Corporation
Room: Magnolia
Evaluation of Detection Techniques of Hidden Corrosion Beneath the Thermal Protective System of the Space Shuttle Orbiter
C. Kammerer, B. Regez, United Space Alliance; J. Walker, NASA/Marshall Space Flight Center, E. Madaras, NASA/Langley Research Center .07/.14pts.
9:30 am 9:30 am
.07/.14pts.
Using Magnetic Flux Leakage Technique to Predict 3Dimensional Depth Profiles of Defects in Pipe-wall A. Joshi, Microline Technology Corporation
.07/.14pts.
Thermography of the RCC Leading Edge or On-Orbit K.E. Cramer, NASA/Langley Research Center
.07/.14pts.
An MFL Signal Inversion Technique using the Finite Element Neural Network P. Ramuhalli, Michigan State University
.07/.14pts.
Space Shuttle Orbiter and International Space Stations (ISS) COPV Inspection with Laser Shearography
F. Santos, NASA Kennedy Space Center; A. Koshti, NASA Johnson Spaceflight Center; R. Russell, NASA Kennedy Space Center; R. Saulsberry, NASA White Sands Test Facility; B. Regez, United Space Alliance, Kennedy Space Center; J. Newman, Laser Technology Inc.
.07/.14pts.
1 10:45 am
.07/.14pts.
MWM-Array Eddy Current Imaging of SCC in Pipelines N. Goldfine, T. Lovett, V. Zilberstein, M. Windoloski, T. He, I. Lorilla, C. Craven, JENTEK Sensors; M. Fingerhut, RTD Quality Services
.07/.14pts.
Development of Eddy Current Techniques for Evalution of Shuttle Materials and Structures B.Wincheski, NASA/Langley Research Center; J. Simpson, Lockheed Martin
.07/.14pts.
Simulation of Guided Wave Defect Signals in Pipe Using a Transmission Line Model S. Kim, H. Kwun, G. Light, Southwest Research Institute
.07/.14pts.
Comparison of NDT Methods to Inspect Cork & Cork Filled Epoxy Bonds M. Lingbloom, ATK NDT Engineering
.07/.14pts.
Room: Jasmine
Room: Magnolia
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
.07/.14pts.
3:25 pm 3:25 pm
Characterization of Adhesive and Sealant Curing Dynamics using High Resolution Ultrasound
E. Malyarenko, M. Pedrick, A. Achanta, A. Sanford, M. McKenna, J. Heyman, Luna Innovations Inc.
.07/.14pts.
3:50 pm 3:50 pm
.07/.14pts.
4:15 pm 4:15 pm
.07/.14pts.
.07/.14pts.
Application of Sonic Infrared NDE to Detection of Fatigue Damage in Military Aircraft Components
D. Mayton, SAIC, S. Cargill, Aerospace Structural Integrity, Inc.; T. Moran, AFRL/MLLP
.07/.14pts.
4:40 pm 4:40 pm
.07/.14pts.
In-situ Performance Monitoring of High Power Microwave Klystron Systems with Acoustic Emission Technology
S. Russell, A. Ramirez, D. Brock, Space and Naval Warfare Systems Center; N. Joshi, Office of Naval Research American Society for Engineering Education
.07/.14pts.
5:05 pm 5:05 pm
7
Room: Jasmine
Room: Magnolia
Bone Strain Measurement by Laser Speckle Pattern Interferometry: Potentials and Limitations
L. Yang, Oakland University; H. Yokota, Indiana University
.07/.14pts.
.07/.14pts.
Experimental Validation of Tissue Motion Tracking Resolution Limits for the Digital Pulsed PhaseLocked Loop
J. Heyman, J. Lynch, B. Hefner, C. Domack, Luna Innovations Incorporated
.07/.14pts.
POD Tutorial Part III Advanced Data Analysis Methods for POD
B. Meeker, Iowa State University
.07/.14pts.
Development and Evaluation of Differential Eddy Current Method for Detection of Outlet Strut Fracture in Bjork-Shiley Artificial Heart Valves
V. Amin, N. Nakagawa, Iowa State University
.07/.14pts.
.07/.14pts.
11:10 am 11:10 am
8
Experimental and Model-Assisted Methods to Assess Nondestructive Evaluation Reliability the 2007 Update of MILSTD-1823-2, including new POD Software
C. Annis, Statistical Engineering; J. Knopp, Air Force Research Laboratory; S. Cargill, Aerospace Structural Integrity, Inc.; S. Vukelich, University of Dayton Research Institute
.07/.14pts.
1:30 pm 1:30 pm
.07/.14pts.
1:55 pm 1:55 pm
.07/.14pts.
Surface Acoustic Wave (SAW) Sensor for Detection of Salmonella using Love Wave: Fabrication of SAW Device
K. Kim, S. Lee, B. Ahn, Korea Research Institute of Standards and Science
2:20 pm 2:20 pm
.07/.14pts.
.07/.14pts.
A Minimally Invasive Electomagnetic Technique for the Evaluation of Prosthetic Heart Valves
S. Chan, S. Udpa, Michigan State University; M. Oka, Oita National College of Technology, Japan
Industrial Inspection Reliability Practice in a Non-industrial Environment: Humanitarian Demining as an NDE System
M. Pavlovic, C. Mueller, BAM Berlin
2:45 pm 2:45 pm
.07/.14pts.
.07/.14pts.
Exhibit Hours
Monday 26 March
5:008:00 pm: Welcome Reception
BIR, Inc. 425 Barclay Blvd. Lincolnshire, IL 60069 847/279-5112 847/279-4900 fax www.birinc.com Danatronics Corporation 14 Electronics Avenue Danvers, MA 01923 978/777-0081 978/777-0081 fax www.danatronics.com Eastman Kodak Company 343 State Street Rochester, NY 14650-0505 800/328-2910 585/724-4806 fax www.kodak.com/go/ndtproducts Ely Chemical Company, Inc. 2603 N. Foundation Dr. South Bend, IN 46628 574/251-9152 574/251-9157 fax www.elychemical.com Fujifilm NDT Systems, Inc. 1055 Stevenson Court Bldg. 105 Roselle, IL 60172-2300 630/582-2202 630/582-2292 fax www.fujindt.com Geophysical Survey Systems, Inc. 12 Industrial Way Salem, NH 03079 603/893-1109 603/889-3984 fax www.geophysical.com Hellier 16631 W. Hardy Road Houston, TX 77060-6239 281/873-0980 281/873-0981 fax www.hellierndt.com Imperium, Inc. 1738 Elton Road, #218 Silver Spring, MD 20903 301/431-2905 301/431-0200 fax www.imperiuminc.com Innov-X Systems 100 Sylvan Road Suite 100 Woburn, MA 01801 781/938-5005 781/938-5005 fax www.innov-sys.com Jenoptik-IR 4480 S. Tiffany Drive West Palm Beach, FL 33407 561/881-8115 561/881-1947 fax www.jenoptik-ir.com
Tuesday 27 March
11:00 am4:00 pm: Show Open 11:30 am1:00 pm: Lunch in the Exhibit Hall
Exhibitors BIR, Inc. Danatronics Corporation Eastman Kodak Company Ely Chemical Company, Inc. Fujifilm NDT Systems Geophysical Survey Systems, Inc. Hellier Imperium, Inc. Innov-X Systems Jenoptik-IR Laser Technology, Inc. Mala USA, Inc. Matec Instrument Companies, Inc. Olympus Peltec Services, Inc. PH Diversified PH Tool Reference Standards Physical Acoustics Corporation Radiographic Design & Equipment SENTINEL/QSA Global, Inc. Sherwin, Inc. Taylor & Francis Group, LLC Thermal Wave Imaging, Inc. Thermo Scientific NITON Analyzers UTEX Scientific Instruments, Inc. Varian ProductsSecurity & Inspection WesDyne AMDATA Yxlon International, Inc.
10
Laser Technology, Inc. 1055 West Germantown Pike Norristown, PA 19403 610/631-5043 610/631-0934 fax www.laserNDT.com Mala USA, Inc. P.O. Box 80430 Charleston, SC 29416 843/852-5021 843/769-7392 fax www.malags.se Matec Instrument Companies, Inc. 56 Hudson Street Northborough, MA 01532-1968 508/393-0155 508/393-5476 fax www.matec.com Olympus 48 Woerd Avenue Waltham, MA 02453 781/419-3900 781/419-3980 fax www.olympusndt.com Peltec Services, Inc. 3412 Cherrywood Road Florence, SC 29501 843/610-5093 843/665-7045 fax www.peltec.ndt.com PH Diversified 4486-B Raceway Drive Concord, NC 28027 704/795-4402 704/795-4403 fax www.flawtech.com/phd PH Tool Reference Standards 4406 Bethlehem Pike Telford, PA 18969 267/203-1600 267/203-1601 fax www.phtool.com Physical Acoustics Corp. 195 Clarksville Road Princeton JCT, NJ 08550-5303 609/716-4000 609/716-4177 fax Radiographic Design & Equipment 1630 91st Avenue NE Blaine, MN 55449 763/784-3236 763/784-3642 fax www.radiographicdesign.com
SENTINEL/QSA Global, Inc. 6765 Langley Drive Baton Rouge, LA 70809 225/757-5893 225/756-0365 fax www.sentinelndt.com Sherwin, Inc. 5540 Borwick Avenue South Gate, CA 90280 562/861-6324 562/923-8370 fax www.sherwininc.com Taylor & Francis Group, LLC 325 Chestnut Street Philadelphia, PA 19106 215/625-8900 215/625-2940 fax www.taylorandfrancis.com Thermal Wave Imaging, Inc. 845 Livernois Ferndale, MI 48220 248/414-3730 248/414-3764 fax www.thermalwave.com Thermo Scientific NITON Analyzers 900 Middlesex Turnpike, Bldg. 8 Billerica, MA 01821 978/670-7460 978/670-7430 fax www.thermo.com/niton UTEX Scientific Instruments, Inc. 2319 Dunwin Drive Unit 8 Mississauga, ONT, Canada L5L 1A3 905/828-1313 905/828-0360 fax www.utex.com Varian - Security & Inspection Products 6883 Spencer Street Las Vegas, NV 89119 702/938-4864 702/938-4833 fax www.varian.com/sip WesDyne AMDATA 20 International Drive Windsor, CT 06095 413/478-3691 860/731-1674 fax www.amdataproducts.com Yxlon International, Inc. 3400 Gilchrist Road Mogadore, OH 44260 330/798-4800 330/784-9854 fax www.yxlon.com
11
Who Should Attend: The course is designed for Level II and Level III technicians, Engineers and NDT managers. This course could also be beneficial for individuals in the business development and marketing of NDT services and equipment sales.
12
Presenters:
William Meeker, Iowa State University and Floyd Spencer, Sandia National Laboratories
This is an excellent opportunity to learn about the basics of probability of detection methods, discover how reliability analysis tools have developed to address the ever-changing data acquisition approaches and new methods being used by the NDE community, and see how these tools are applied first-hand to inspection examples. POD Tutorial Part I Dealing with Hit/Miss Data Probability of detection (POD) is an important engineering metric for the inspection community. Various aspects of the POD calculation may be used to make choices between inspections for implementation, to qualify an inspection method, inspection system or inspector, or to support life management calculations. The origins of POD studies go back to the use of the 29 out of 29 simple approach which was soon replaced with hit-miss analysis. The hit/miss method is often used in cases where quantitative measurement of the signal response is not feasible, such as with penetrant testing or magnetic particle testing. The data is binary in nature, either the flaw is detected (hit or 1) or missed (0). The first presentation will cover basic definitions used by the POD and reliability communities, review the hit/miss analysis method, and the logistics model typically used in this analysis method. A discussion of maximum likelihood methods will be included. POD Tutorial Part II Review of Ahat vs A Data Strategies In most modern inspection methods, it is possible to measure the signal response for a given flaw which provides considerable leverage in analysis of POD. In the ahat vs. a analysis method, the signal response is denoted by ahat and some relevant characteristic of the flaw, typically . length, depth or area, is denoted by a This analysis approach has been in active use since the 1980s and is well-documented in MIL-HNBK 1823. The use of regression models will be reviewed including explanations of left (responses below the noise floor) and right (saturated responses) censoring.
POD Tutorial Part III Advanced Data Analysis Methods for POD In many instances the use of POD methods is straightforward and relatively easy to implement. However, complications often arise when dealing with real data, particularly when the data is from field finds. Recent results from a field finds example will be presented along with a series of simulations that show the importance of the role misses play in POD analysis. Discussion will include the influence of left and right censoring and the use of truncation. In addition, recent experience with advanced topics in empirical POD will be discussed including bivariate regression models, errors in flaw sizing, and the impact of multiple sources of variability in NDE inspection. POD Tutorial Part IV Practical Considerations in Empirical POD Study Design It is often desired to validate the application of an NDE technique to a new inspection process. The application of a new NDE inspection process will include the development of written procedures and may also include developing a training process. Validation of such a process needs to address these elements in order to provide a basis for improvement. The same can be said for understanding and characterizing an existing inspection process. Addressing such issues and other specific concerns requires experimental design concepts to be applied in the gathering of data. These practical considerations will be discussed through the presentation of examples. POD Tutorial Part V Summary of POD Study Results Results of past POD/validation studies that included elements beyond that of estimating a POD curve will be discussed. The common thread in the several studies is that elements of specific concern were designed into the data gathering that enables the characterization of the NDE process beyond a single POD curve summary. For more details on POD, go to the Model-assisted POD Working Group Web site at: http://www.cnde.iastate.edu/MAPOD
13
Sunday 25 March
Other Committee Meetings and Events 8:00 am12:00 pm Operations Committee* 10:00 am5:00 pm Standards Development 1:005:00 pm Board of Directors 3:00-5:00 pm Registration Open Oleander A Marathon Oleander A Hibiscus
Monday 26 March
Technical and Education Council
8:0010:00 am 10:30 am12:30 pm 12:001:00 pm 12:301:00 pm 3:005:00 pm 8:009:00 am 9:0010:30 am 10:30 am12:00 pm 1:304:00 pm 8:00 am5:00 pm 8:00 am5:00 pm 8:00 am7:30 pm 8:3010:00 am 8:30 am-12:30 pm 8:30 am-12:30 pm 1:00-3:30 pm 1:004:30 pm Administrative Meeting SNT-TC-1A Education Division SNT-TC-1A Interpretation Panel* MT/PT Membership Division Awards Division Section Management Division Regional Directors Division Standards Development Selection Committee* Registration Open Spouse/Companion Hospitality Suite* Short Course* SAE MT/PT Task Group* Strategic Planning SAE AMS Committee K Biscayne Longboat Biscayne Longboat Biscayne Largo Largo Largo Largo Marathon Cedar Hibiscus Executive Boardroom Oleander A Magnolia Siesta Magnolia
5:008:00 pm
Citrus Ballroom
Tuesday 27 March
Technical and Education Council
9:0010:00 am 9:0010:30 am 10:00-11:00 am 10:0011:00 am 10:00 am12:00 pm 11:00 am12:00 pm 11:00 am1:00 pm 12:001:00 pm Chemical Petroleum Handbook Subcommittee Joint SNT-TC-1A/SDC/CMC Executive Committee Magnetic Flux Leakage Educational Publications Leak Testing Technician Advisory Chemical and Petroleum Ultrasonic Siesta Biscayne Siesta Cedar Clearwater Building 15 Cedar Siesta Largo
14
12:001:30 pm 1:002:00 pm 1:002:00 pm 1:002:30 pm 1:302:30 pm 2:303:30 pm 3:00-4:00 pm 3:00-4:30 pm 4:30-5:30 pm 9:3010:30 am 10:3011:00 am 3:004:00 pm Research Council 12:001:00 pm 3:004:00 pm 6:308:30 pm
Materials Evaluation Penetrating Radiation Visual NDT Reliability Studies NDT Handbook Development MT Handbook Subcommittee Joint Council* Electromagnetics Aerospace Technician of the Year Selection* Mentoring Award Selection* Joint Council* Infrastructure Joint Council* Research Council Dinner Meeting (open meeting, sign-up form located in Registration area) IRRSP Joint SNT-TC-1A/SDC/CMC Executive Committee NDT Level III & ACCP Divisions* PMD Division/Ethics Committee Joint Council* Speakers Briefing* Registration Open Keynote Address Spouse/Companion Hospitality Suite Gold Medal Award* Concurrent Sessions Exhibits Open Lunch in the Exhibit Hall Past Presidents Luncheon* Past Presidents Meeting* Young NDT Professional Award* Fellow Awards Subcommittee* ISO Subcommitte
Cedar Clearwater Building 15 Largo Biscayne Cedar Cedar Largo Biscayne Marathon Largo Largo Largo Executive Boardroom Largo Oleander A/B
15
Wednesday 28 March
Technical and Education Council 9:0010:00 am Aerospace Handbook Subcommittee 9:0011:00 am SNT-TC-1A Workshop 10:00-11:00 am GPR Ad-Hoc 11:00 am12:00 pm Methods Division 1:003:30 pm Full Council Section Operations Council 2:003:30 pm SOC Full Council Research Council 9:00 10:00 am 11:00 am12:00 pm RNDE Programs Marathon Cedar Largo Marathon Cedar Largo Biscayne Biscayne Siesta Siesta
Certification Management Council 9:0010:00 am Certification Management Council 10:00 am5:00 pm Certification Management Council A.B* Other Committee Meetings and Events 7:308:00 am Speakers Briefing* Registration Open 8:00 am5:00 pm 8:309:15 am Award for Sustained Excellence Address 8:3010:00 am Spouse/Companion Hospitality Suite 9:00 am12:00 pm Business & Finance 9:30 am5:30 pm Concurrent Sessions 1:00-5:00 pm 1:005:00 pm Short Course* Constitution and Bylaws
Oleander B Hibiscus Jasmine Executive Boardroom Longboat Jasmine & Magnolia Oleander A Longboat
Thursday 29 March
7:308:00 am 8:00 am12:00 pm 8:00 am5:00 pm 8:309:15 am 8:3010:00 am 9:30 am3:10 pm Speakers Briefing* Registration Open Operations Committee* Award for Innovation Address Spouse/Companion Hospitality Suite Concurrent Sessions Cedar/Marathon Hibiscus Oleander A Jasmine ` Executive Boardroom Jasmine & Magnolia
Friday 30 March
8:00 am5:00 pm Board of Directors Oleander A
16
ASNT is the worlds largest technical organization dedicated to nondestructive testing, evaluation, and its professionals.
The American Society for Nondestructive Testing (ASNT) is a place where NDT/NDE related scientific, engineering and technical knowledge comes to be shared, distributed and utilized. The Society promotes research and the exchange of technical information to members and other professionals using NDT/NDE/NDI. No other nonprofit organization brings together the broad network that is the nondestructive testing and evaluation community. Diverse and dynamic families of professionals representing engineers, researchers, vendors and academicians, ASNT members are dedicated to improving product safety and reliability. Members of the Society have access to opportunities for: volunteering in over 100 committees, publishing work or research in ASNT publications and journals; and, exchanging technical knowledge, information and research through a variety of conferences and symposia.
Visit the ASNT Web site, www.asnt.org or call Membership Services at 614.274.6003 or 800.222.2768
18
Recommended Practice No. SNT-TC-1A , 2006 Edition ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel, ANSI/ASNT CP-105-2006 $44 member $72 non member Order # 2070 Package includes both documents. ASNT Standard for Qualification and Certification of Nondestructive Testing Personnel, ANSI/ASNT CP-189-2006 ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel, ANSI/ASNT CP-105-2006 $44 member $72 non member Order # 2507 Package includes both documents. ASNT Standard Topical Outlines for Qualification of Nondestructive Testing Personnel, ANSI/ASNT CP-105-2006 $29.25 member $48 non member Order # 2820
The ASNT Personnel Training Publications: Electromagnetic Testing Classroom Training Book Remote Field Testing Alternating Current Field Measurement Flux Leakage Theory Eddy Current Applications Test Systems and Analysis Testing Standards and Procedures $19.50 member $26.50 non member Order #1643
To order online visit ShopASNT at: www.asnt.org/shopasnt By phone 614.274.6003, 800.222.2768 or fax 614.274.6899
(US/Canada)
19
Chairperson
Sharon Vukelich
President
Marvin Trimm
Vice President
Victor Hernandez
Secretary/Treasurer
Jocelyn Langlois
Board of Directors Fred Cella (CMC) Shant Kenderian James (Rick) Cahill (SOC) Roland Valdes (T&E) Marwan Basrawi Darrell Harris Gary Heath Walter Matulewicz
Michael McDaniel Raymond Morasse Ricky Morgan Robert Potter Gary Zimak Executive Director Wayne Holliday
Individual subscriptions are only $55 a year for either the print or electronic version. Subscribe to both for only $75. For content you can count on, visit www.rnde.org or call ASNT at 614.274.6003 or 800.222.2768.
Subscribe today.
20
US/Canada
Research Council
(elected chair, vice chair and secretary)
Research Council Committees Awards Membership Program Publications Research Liaison RNDE Special Meetings Technology Transfer University Programs
Section Operations Council Divisions Awards Membership Regional Directors Section Management
Technical and Education Council Divisions Committee on Acoustic Emission from Reinforced Plastics (CARP) Education Industry Interest Methods Publications
Councils
Members and nonmembers are invited to become active in a council and may do so by contacting the appropriate council chair. More information about the councils, their divisions and committees appears in the ASNT Bylaws and the council yearbooks. Council, division and committee meetings are usually held during ASNTs Spring and Fall Conferences. Certification Management Council
(elected chair, vice chair and secretary)
* ASNT directors and national officers are installed at the Annual Business Meeting held at the ASNT Fall Conference. More information about national elections can be found in the ASNT. Persons from outside the Board of Directors are appointed to serve on several of these committees. The chair of each committee is usually a Board member. Reports directly to the Executive Committee.
Certification Management Council Divisions Industry Sector Level II Examination Level III Examination Program Maintenance
21