Documentos de Académico
Documentos de Profesional
Documentos de Cultura
SERVICE MANUAL
Ver. 1.3 2008.07
Revision History How to use Acrobat Reader
US Model Canadian Model AEP Model UK Model E Model Australian Model Chinese Model Korea Model
Revised-3
Replace the previously issued SERVICE MANUAL 9-852-183-13 with this Manual.
Link
SPECIFICATIONS SERVICE NOTE DISASSEMBLY BLOCK DIAGRAMS REPAIR PARTS LIST
The components identified by mark 0 or dotted line with mark 0 are critical for safety. Replace only with part number specified.
Les composants identifis par une marque 0 sont critiques pour la scurit. Ne les remplacer que par une pice portant le numro spcifi.
In case of the main board, or main frame assembly failure, contact your local Sony Service Headquarter for the measures.
DSC-S700
9-852-183-14
SPECIFICATIONS
[System]
Image device: 7.20 mm (1/2.5 type) color CCD, Primary color filter Total pixel number of camera: Approx. 7 410 000 pixels Effective pixel number of camera: Approx. 7 201 000 pixels Lens: 3 zoom lens f = 5.8 17.4 mm (35 105 mm when converted to a 35 mm still camera) F2.8 ~ 4.8 Exposure control: Automatic exposure, Scene Selection (7 modes) White balance: Automatic, Daylight, Cloudy, Fluorescent, Incandescent, Flash File format (DCF compliant): Still images: Exif Ver. 2.21 JPEG compliant, DPOF compatible Movies: AVI (Motion JPEG) Recording media: Internal Memory (approx. 24 MB), Memory Stick Duo Flash: Flash range (ISO sensitivity (Recommended Exposure Index) set to Auto): approx. 0.5 to 3.5 m (19 3/4 inches to 137 7/8 inches) (W)/approx. 0.5 to 2.0 m (19 3/4 inches to 78 3/4 inches) (T)
[LCD screen]
LCD panel: 6.0 cm (2.4 type) TFT drive Total number of dots: 112 320 (480234) dots
[Power, general]
Power: LR6 (size AA) Alkaline batteries (2), 3 V HR15/51: HR6 (size AA) Nickel-Metal Hydride batteries (2) (not supplied), 2.4 V ZR6 (size AA) Oxy Nickel Primary Battery (2) (not supplied), 3 V AC-LS5K AC Adaptor (not supplied), 4.2 V Power consumption (during shooting): 1.2 W Operating temperature: 0 to 40 C (32 to 104 F) Storage temperature: 20 to +60 C (4 to +140 F) Dimensions: 91.061.025.1 mm (3 5/82 1/21 inches) (W/H/D, excluding protrusions) Mass: Approx. 198 g (7.0 oz) (including two batteries and wrist strap, etc.) Microphone: Monaural Buzzer Exif Print: Compatible PRINT Image Matching III: Compatible PictBridge: Compatible Design and specifications are subject to change without notice.
DSC-S700 2
CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
SAFETY-RELATED COMPONENT WARNING!! COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT! LES COMPOSANTS IDENTIFS PAR UNE MARQUE 0 SUR LES DIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONT CRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NE REMPLACER CES COMPOSANTS QUE PAR DES PISES SONY DONT LES NUMROS SONT DONNS DANS CE MANUEL OU DANS LES SUPPMENTS PUBLIS PAR SONY.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following safety checks before releasing the set to the customer. 1. Check the area of your repair for unsoldered or poorly-soldered connections. Check the entire board surface for solder splashes and bridges. Check the interboard wiring to ensure that no wires are "pinched" or contact high-wattage resistors. Look for unauthorized replacement parts, particularly transistors, that were installed during a previous repair. Point them out to the customer and recommend their replacement. Look for parts which, through functioning, show obvious signs of deterioration. Point them out to the customer and recommend their replacement. Check the B+ voltage to see it is at the values specified. FLEXIBLE Circuit Board Repairing Keep the temperature of the soldering iron around 270C during repairing. Do not touch the soldering iron on the same conductor of the circuit board (within 3 times). Be careful not to apply force on the conductor when soldering or unsoldering. Unleaded solder Boards requiring use of unleaded solder are printed with the leadfree mark (LF) indicating the solder contains no lead. (Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size.)
2. 3.
4.
5. 6.
DSC-S700
: LEAD FREE MARK Unleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than ordinary solder. Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about 350C. Caution: The printed pattern (copper foil) may peel away if the heated tip is applied for too long, so be careful! Strong viscosity Unleaded solder is more viscous (sticky, less prone to flow) than ordinary solder so use caution not to let solder bridges occur such as on IC pins, etc. Usable with ordinary solder It is best to use only unleaded solder but unleaded solder may also be added to ordinary solder.
TABLE OF CONTENTS
Section Title Page
1.
SERVICE NOTE
1-1. Process After Fixing Flash Error 1-1 1-2. Method for Copying or Erasing the Data in Internal Memory 1-1
2. 3.
3-1. Overall Block Diagram 3-1 3-2. Power Block Diagram 3-2
4.
4-1. Exploded Views 4-1 4-1-1. Overall Section 4-1 4-1-2. Main Frame Block 4-2 4-1-3. Lens Block 4-3 4-2. Accessories 4-4
DSC-S700 4
1. SERVICE NOTE
1-1. PROCESS AFTER FIXING FLASH ERROR
Method for Initializing the Flash Error
Initialize
Initializes the setting to the default setting.
1 Select [OK] with v on the control button, then press z. The message Initialize all settings Ready? appears. 2 Select [OK] with v, then press z. The settings are reset to the default setting.
Format
Formats the internal memory.
Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1 Select [OK] with v on the control button, then press z. The message All data in internal memory will be erased Ready? appears. 2 Select [OK] with v, then press z. The format is complete.
DSC-S700 1-1
2. DISASSEMBLY
The following flow chart shows the disassembly procedure.
2-1.
DISASSEMBLY
3 A 1
Battery case lid removal 1 Pull out the battery case slowly until stop 2 Put a nail into a slot 3 Pull the battery case in the direction of arrow A
3 Jack Cover
DSC-S700 2-1
2. DISASSEMBLY
(From 2-1 Page)
1 2
1 Screw TP1.7 3.0 2 Cabinet (Rear) Assy 3 Button Assy Insert the plastic tweezers into the gap between middle cover (left) and DC door to prize the middle cover (left).
1 Cabinet (Bottom)
1
DSC-S700 2-2
2. DISASSEMBLY
1
Caution
1 Screw TP1.7 3.0 1 Screw TP1.7 3.0 2 Cabinet (Upper) Block Assy
3
2 1
1 SW Frame Assy
DSC-S700 2-3
2. DISASSEMBLY
3 1 4 2
1 Screw TP1.4 3.0 2 Lens Assy 3 Screw TP1.7 3.0 4 Strap Bracket
2
1 Screw TP1.7 3.0 2 MCU Block Assy
HELP01 HELP02
4 3
HELP01 HELP03
1
1 Lens Block Protection Sheet 2 Screw TP1.4 3 3 CCD Assy 4 Low Pass Filter Set
HELP02
DSC-S700 2-4
HELP
HELP01
Be careful about the Lens Assy. Don't press the Barrier part. Don't press the Sensor holder
HELP02
HELP03
Attach the Block assy protection sheet as shown. Attach the Lens block protection sheet covering this screw. Lens block protection sheet Screw hole Screw
Attach the Lens block protection sheet avoiding three screw holes. DSC-S700
Screw holes
HELP
3. BLOCK DIAGRAMS
3-1.
LCD
DSP CDS
+5VM +3.3V LCD_EN LCD_MCLK LCD_VD LCD_HD LCD_SCLK LCD_SDATA LCD[0..7] MLCD_ON BL DGND
LCD
+5VM +3.3V LCD_EN LCD_MCLK LCD_VD LCD_HD LCD_SCLK LCD_SDATA LCD[0..7] MLCD_ON BL DGND
PXCLK HD VD CDS_EN SCLK SDATA AFERST TG_EN VSUB_Con1 VSUB_Con2 CCD_ON TG_ON CDS_ON CCD[0..11]
PXCLK HD VD CDS_EN SCLK SDATA AFERST TG_EN VSUB_Con1 VSUB_Con2 CCD_ON TG_ON CDS_ON CCD[0..11]
PXCLK HD VD CDS_EN SCLK SDATA AFERST TG_EN VSUB_Con1 VSUB_Con2 CCD_ON TG_ON CDS_ON CCD[0..11]
CDS
2
MEMORY DDR DGND +3.1VD RAMD[0..15] RAMA[0..14] RAMLDM RAMWE_N RAMCAS RAMRAS RAMCS_N RAMLDQS RAMUDQS RAMUDM RAMCLK_N RAMCLK RAMCLK_EN RAMREF
+2.5VD
+2.5VD DGND
DGND
2
P1,P2
4
S
NC 3
RAMD[0..15] RAMA[0..14] RAMLDM RAMWE_N RAMCAS RAMRAS RAMCS_N RAMLDQS RAMUDQS RAMUDM RAMCLK_N RAMCLK RAMCLK_EN RAMREF
RAMD[0..15] RAMA[0..14] RAMLDM RAMWE_N RAMCAS RAMRAS RAMCS_N RAMLDQS RAMUDQS RAMUDM RAMCLK_N RAMCLK RAMCLK_EN RAMREF
MS_ON R/B MS_INS# CLE WE WP ALE CE0 RE MS_CLK MD[0..7] FA23 FA20 FA22 FA21
MS_ON R/B MS_INS# CLE WE WP ALE CE0 RE MS_CLK MD[0..7] FA23 FA20 FA22 FA21 UGND2
DGND +3.1VD MS_ON R/B MS_INS# CLE WE WP ALE CE0 RE MS_CLK MD[0..7] FA23 FA20 FA22 FA21 UGND2
+13.4V MEMORY
DDR
BEEPER
BEEPER
ST_LED
1
GREEN
LENS
2
FLASH FLASH_VP +3.1VD LENS_PS SHUTTER_M1 SHUTTER_M0 IRIS_M1 IRIS_M0 ZOOM_M1 ZOOM_M0 FOCUS_M1 FOCUS_M0 LENS_EN LENS_SCLK LENS_SDATA ZOOM_PI ZOOM_PR FOCUS_PI +5VM DGND
ZOOM SENSOR
+3.1VD LENS_PS SHUTTER_M1 SHUTTER_M0 IRIS_M1 IRIS_M0 ZOOM_M1 ZOOM_M0 FOCUS_M1 FOCUS_M0 LENS_EN LENS_SCLK LENS_SDATA ZOOM_PI ZOOM_PR FOCUS_PI +5VM DGND
LENS
FLASH_VP +5VM +3.1VD DGND FLASH_RDY FLASH_CHG_L STROBE_TRG STROBE_CHG AF_LED STROBE_PWR
FLASH
LENS_PS SHUTTER_M1 SHUTTER_M0 IRIS_M1 IRIS_M0 ZOOM_M1 ZOOM_M0 FOCUS_M1 FOCUS_M0 LENS_EN LENS_SCLK LENS_SDATA ZOOM_PI ZOOM_PR FOCUS_PI
ZOOM MOTOR FOCUS SENSOR FOCUS MOTOR IRIS MOTOR SHUTTER MOTOR
PWR_ON PWRKEY BAT_LOAD JACK D+ DUSB_DET AV_DET VIDEO_OUT LINE_OUT BEEPER +13.6V +3.1VD DGND UGND
SW
1
GREEN
+3.1VD DGND
STA_LED SW_KEY_ADC
STA_LED SW_KEY_ADC
STA_LED SW_KEY_ADC
PC
UGND2
SW
2
POWER VP -7.5V +2.5VD +3.3V +3.1VD +5VM +13.4V +1.8VD
1 SW_PLAYBACK
SW_PLAYBACK
2 5
JACK
CCD_ON1 VP PWR_CTRL -7.5V +2.5VD +3.3V +3.1VD +5VM +13.4V +1.8VD CCD_ON DGND
CCD_ON1 PWR_CTRL
SW_WIDE SW_TELE
SW_TELE MODE_R5 MODE_R4 MODE_R2 MODE_R1 MODE_R0 SHUT1 SHUT2 PW_LED 32.768KHz
VP +1.8VD +3.1VD +3.3VS +3.3V MODE_R5 MODE_R4 MODE_R2 MODE_R1 MODE_R0 SHUT1 SHUT2 PW_LED
4 6
4 6
PWR_CTRL
2 5
CCD_ON1
SW_WIDE
4 6
2 5
TOP
PWR_KEY MODE_R5 MODE_R4 MODE_R2 MODE_R1 MODE_R0 SHUT1 SHUT2 PW_LED DGND +3.1VD
PWR_KEY
1
GREEN
MIC_N
+2.5VD DGND
DSP
MIC
2 3
Power
POWER
1 4
TOP
Out
GND_3 GND_2
3 2
Q17
1
F1 1.6A/36V
1000PK_25V_X7R
1 2
0.1UK_16V_X5R 1 2 1 2
1000PK_25V_X7R
1 4 2 3
8 5 7 6
BATT- 1
1
F2 1A/30V
DSC-S700 3-1
3. BLOCK DIAGRAMS
BATT+
3-2.
+13.4V
MCU BOARD
STROBE BOARD
4
P1,P2
F1 1.6A/36V 1 2 2 F2 1A/30V
2 1
FLASH_VP
VDD
1
+5VM
NC S 3
CCD BOARD
47UF 1
+2.5VD
1 1
+2.5VD
2 2
VDDQ
3 1 2
22UF 1 1
0.1UF
U2 BUFFER +13.4V
1 1 1 1 1 10UK 2 2.2UK 2 2 0.01UK 2 2 4.7UK
Q2
2 1 VCC 1UF 2
+5VM
+13V_CCD
0.01UK 2.2UK 2 2.2UK 2 1000PF 2
VCC IN
10UF X 4
0.01UF X 7 1000PF X 3
+1.8VD
2 2 22UF 1 1 0.1UF
0.1UF 2 1
-7.5V
1 2 2 0.01UK 0.1UF 1 1 2
-7.5V_CCD
VL
4.7UK 2 1
VDD
1 BULE
+3.1VD
+5VM
2
+3.3V
2
10UF
U1
TOP BOARD
1 BULE 2
22UF
22UF 1
+3.1VD
+3.1VD
PVCC VCC VM1 VM2 VM3
47UF 2 2
+3.1VD
1 2 22UF 1 1 4.7UK 2 2 1
+13V_VD
0.1UK
VH
+5VM
+ 1 0.1UF X 4
-7.5V_VD
1 C107 #4.7UK_25V 1 0.1UK 2 2
VL
PVDD DVDD AVDD
+3.1VD
AFPIV
1 0.1UF X 4 2
+3.3V
2
+3.1V TG
2 1UF X 2 1 1 1 10UF 2 0.1UF X 2
+3.3VS
+2.5VD
+1.8VD
1 1 10UF X 2 0UF 1000PF X 2 000PF 1 20 0.1UF X 2 .1UF
ZPIV
21 21
+3.3V
2 1UF 1 2
+3.1V
0.01UF X 4
+3.1VD
VDDP VDDDAC VDDUSB VDDSPKR VDDADC VDDAUO
1 1 1000PF X 2 1
+3.3V
0.1UF X 2 .1UF 2 2 1UF 1 1
+3.1V CDS
0.1UF
21
20
10UF X 2 0UF
LED anode
U11
1 1
+3.3V
0.1UF
+3.1VL
4.7UF
LDO
2 2
+3.3V
2
+3.1V
1UF
LCD_BACKLIGHT
FB
1 RED
+3.1VD
1 1
VCC
10UF 2 2
0.1UF X 2
+3.1VD
SW 1 1 10UF 2 2 0.1UF X 2
VCC2
SW BOARD
+3.1VD
1 BULE
DSC-S700 3-2
10
9
Main Frame Block (See 4-1-2)
2 2 12
5
ns
11
4 8
7 11
6 3
Ref. No. 1 2 3 4 5 6
Description SCREW TP1.7*3 SCREW TP1.7*3 CABINET (FRONT) ASSY LID, BT MIDDLE COVER (LEFT)
Ref. No. 7 8 9 10 11 12
Description LID, JK MIDDLE COVER (RIGHT) CABINET (UPPER) BLOCK ASSY CABINET (REAR) ASSY SCREW TP1.7*3
DSC-S700 4-1
57
(Note 2)
52 59 52 54
(Note 2)
56 52 51 52
52
F1 F2
52
52
53
52
55
ns (Note 1)
58
ns (Note 1) Lens Block (See 4-3)
51
(Note 1)
In case of the main board, or main frame assembly failure, contact your local Sony Service Headquarter for the measures. The adjustment is not required after replacing the ST block assembly or LCD. Items marked * are not stocked since they are seldom required for routine service. Some delay should be anticipated when or dering these items. Ref. No. 57 * 58 59 0 F1 0 F2 Part No. Description
(Note 2)
Refer to cover for mark 0. Ref. No. 51 52 53 0 54 55 56 Part No. 3-113-002-01 3-209-036-01 3-197-607-01 A-1249-950-A 3-197-609-01 Description SCREW TP1.4*3 SCREW TP1.7*3 BRACKET, STRAP ST BLOCK ASSY (Note 2) HOLDER, LCD
3-197-608-01 LCD (Note 2) 1-820-333-11 MULTI CONNECTOR (REC) 8P X-2319-398-1 BASE, BT 1-576-913-11 FUSE, MICRO (1608 TYPE) (1.6A/36V) 1-576-363-11 FUSE, MICRO (1005 TYPE) (1A/30V)
DSC-S700 4-2
302
ns (CCD Assy)
303
301
ns (TP1.4 3) (Note)
(Note)
In case of the CCD Assy failure, contact your local Sony Service Headquarter for the measures.
Part No.
Description
4-110-079-01 FILTER SET, LOW PASS 4-110-076-01 SHEET, LENS BLOCK PROTECTION A-1253-626-A LENS BLOCK ASSY (SERVICE)
DSC-S700 4-3
4-2.
ACCESSORIES
Note 1: This item is supplied with the unit as an accessory, but is not prepared as a service part.
A/V cable 3-196-980-01 LR6 (size AA) Alkaline Battery (Note 1) USB cable 3-196-981-01
GB
DSC-S650
Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.
Owners Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product.
2-897-955-11(1)
Instruction Manual 2-897-955-12 (ENGLISH) (CND, AEP, UK, E, HK, AUS, JE) 2-897-955-22 (FRENCH, ITALIAN) (AEP, CND) 2-897-955-32 (SPANISH, PORTUGUESE) (AEP, E, JE) 2-897-955-42 (GERMAN, DUTCH) (AEP) 2-897-955-52 (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CH, HK, JE) 2-897-955-62 (RUSSIAN) (AEP) 2-897-955-72 (ARABIC, PERSIAN) (E) 2-897-955-82 (KOREAN) (KR, JE) 2-897-955-92 (CZECH, POLISH) (AEP) 2-897-956-12 (HUNGARIAN, SLOVAK) (AEP) 2-897-956-22 (SWEDISH, FINNISH) (AEP) 2-897-956-32 (DANISH, NORWEGIAN) (AEP) 2-897-956-42 (THAI, MALAYSIAN) (E) 2-897-956-52 (TURKISH, GREEK) (AEP) 2-897-956-62 (ENGLISH, SPANISH) (US)
CLICK!
Table of contents
Basic Operations
DSC-S650/S700
Before operating the unit, please read this Handbook and Instruction Manual thoroughly, and retain it for future reference.
Troubleshooting
Others
Index
2-897-945-11(1)
GB
Cyber-shot Handbook (PDF) (Note 2) (not supplied with DSC-S700) 2-897-945-11 (ENGLISH) 2-897-945-21 (FRENCH) 2-897-945-31 (ITALIAN) 2-897-945-41 (SPANISH) 2-897-945-51 (PORTUGUESE) 2-897-945-61 (GERMAN) 2-897-945-71 (DUTCH) 2-897-945-81 (TRADITIONAL CHINESE) 2-897-945-91 (SIMPLIFIED CHINESE) 2-897-953-11 (RUSSIAN) 2-897-953-21 (ARABIC) 2-897-953-31 (PERSIAN) 2-897-953-41 (KOREAN) 2-897-953-51 (POLISH) 2-897-953-61 (CZECH) 2-897-953-71 (HUNGARIAN) 2-897-953-81 (SLOVAK) 2-897-953-91 (SWEDISH)
2-897-954-11 (FINNISH) 2-897-954-21 (NORWEGIAN) 2-897-954-31 (DANISH) 2-897-954-41 (THAI) 2-897-954-51 (MALAYSIAN) 2-897-954-62 (TURKISH) 2-897-954-71 (GREEK)
Note 2: Handbooks (PDF) of each language are included in CD-ROM (Cyber-shot Application Software).
DSC-S700 4-4
Ref. No. : F1 Part No. : 1-576-913-11 Description : FUSE, MICRO (1068 TYPE) (1.6A/36V)
Ref. No. : F2 Part No. : 1-576-363-11 Description : FUSE, MICRO (1005 TYPE) (1A/30V)
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]
Application of printing:
To set a range to be printed within a page, select the graphic and drag on the page to enclose a range to selection tool be printed, and then click the Print button.
Finding a text
1. Click the Find button . 2. Enter a character string to be found into a text box, and click the [Find]. (Specify the find options as necessary)
, or graphic selection tool . 2. Place the pointer in the position in a text where the link exists (such as a button on cover and the table of contents page, or blue characters on the removal flowchart page or drawing page), and the pointer will change to the forefinger form . 3. Then, click the link. (You will go to the link destination.)
Switching a page
To move to the first page, click the To move to the last page, click the To move to the next page, click the . . . . Rotate Click rotate tool , and the page then rotates 90 degrees each.
Reverse
985218314.pdf
Revision History
Ver. 1.0 1.1 1.2 Date 2007.02 2007.10 2008.06 History Official Release Revised-1 Revised-2 (DI08-133) Contents Change of Supplied accessories S.M. Revised : Page 4-4 Addition of DISASSEMBLY for Lens Assy Addition of HELP Change of BLOCK DIAGRAMS Addition of REPAIR PARTS LIST Revision of ACCESSORIES Revision of Regarding Fuse S.M. Revised : Page 4, 2-4, HELP, 3-1, 3-2, 4-2, 4-3, 4-4, Regarding Fuse Change of Description for Ref. No. F2 and Ref. No. 302 S.M. Revised : Page 2-4, HELP, 4-2, 4-3, Regarding Fuse S.M. Rev. issued Yes Yes
1.3
2008.07
Revised-3
Yes
DSC-S700