Documentos de Académico
Documentos de Profesional
Documentos de Cultura
websites.
PHP is the widely-used, free, and efficient alternative to competitors such as Microsoft's
ASP. PHP is perfectly suited for Web development and can be embedded directly into the
HTML code.
The PHP syntax is very similar to Perl and C. PHP is often used together with Apache
(web server) on various operating systems. It also supports ISAPI and can be used with
Microsoft's IIS on Windows.
A PHP file may contain text, HTML tags and scripts. Scripts in a PHP file are executed on
the server.
Before you continue you should have a basic understanding of the following:
• HTML / XHTML
• Some scripting knowledge
What is PHP?
What is MySQL?
PHP + MySQL
• PHP combined with MySQL are cross-platform (means that you can develop in Windows and
serve on a Unix platform)
Why PHP?
Where to Start?
If your server supports PHP - you don't need to do anything! You do not need to compile anything or
install any extra tools - just create some .php files in your web directory - and the server will parse
them for you. Most web hosts offer PHP support.
However, if your server does not support PHP, you must install PHP. Below is a link to a good tutorial
from PHP.net on how to install PHP5:
http://www.php.net/manual/en/install.php
Download PHP
Download PHP for free here: http://www.php.net/downloads.php
You cannot view the PHP source code by selecting "View source" in the browser - you will
only see the output from the PHP file, which is plain HTML. This is because the scripts are
executed on the server before the result is sent back to the browser.
A PHP scripting block always starts with <?php and ends with ?>. A PHP scripting block can be
placed anywhere in the document.
On servers with shorthand support enabled you can start a scripting block with <? and end with ?>.
However, for maximum compatibility, we recommend that you use the standard form (<?php)
rather than the shorthand form.
<?php
?>
A PHP file normally contains HTML tags, just like an HTML file, and some PHP scripting code.
Below, we have an example of a simple PHP script which sends the text "Hello World" to the
browser:
<html>
<body>
<?php
echo "Hello World";
?>
</body>
</html>
Each code line in PHP must end with a semicolon. The semicolon is a separator and is used to
distinguish one set of instructions from another.
There are two basic statements to output text with PHP: echo and print. In the example above we
have used the echo statement to output the text "Hello World".
Comments in PHP
In PHP, we use // to make a single-line comment or /* and */ to make a large comment block.
<html>
<body>
<?php
//This is a comment
/*
This is
a comment
block
*/
?>
</body>
</html>
Variables are used for storing values, such as numbers, strings or function results, so that
they can be used many times in a script.
Variables in PHP
Variables are used for storing a values, like text strings, numbers or arrays.
When a variable is set it can be used over and over again in your script
$var_name = value;
New PHP programmers often forget the $ sign at the beginning of the variable. In that case it will
not work.
Let's try creating a variable with a string, and a variable with a number:
<?php
$txt = "Hello World!";
$number = 16;
?>
In the example above, you see that you do not have to tell PHP which data type the variable is.
PHP automatically converts the variable to the correct data type, depending on how they are set.
In a strongly typed programming language, you have to declare (define) the type and name of the
variable before using it.
Strings in PHP
String variables are used for values that contain character strings.
In this tutorial we are going to look at some of the most common functions and operators used to
manipulate strings in PHP.
After we create a string we can manipulate it. A string can be used directly in a function or it can be
stored in a variable.
Below, the PHP script assigns the string "Hello World" to a string variable called $txt:
<?php
$txt="Hello World";
echo $txt;
?>
Hello World
Now, lets try to use some different functions and operators to manipulate our string.
The concatenation operator (.) is used to put two string values together.
<?php
$txt1="Hello World";
$txt2="1234";
echo $txt1 . " " . $txt2;
?>
If we look at the code above you see that we used the concatenation operator two times. This is
because we had to insert a third string.
Between the two string variables we added a string with a single character, an empty space, to
separate the two variables.
<?php
echo strlen("Hello world!");
?>
12
The length of a string is often used in loops or other functions, when it is important to know when
the string ends. (i.e. in a loop, we would want to stop the loop after the last character in the string)
Using the strpos() function
The strpos() function is used to search for a string or character within a string.
If a match is found in the string, this function will return the position of the first match. If no match
is found, it will return FALSE.
<?php
echo strpos("Hello world!","world");
?>
As you see the position of the string "world" in our string is position 6. The reason that it is 6, and
not 7, is that the first position in the string is 0, and not 1.
The reference contains a brief description and examples of use for each function!
PHP Operators
Arithmetic Operators
Assignment Operators
Operator Example Is The Same As
= x=y x=y
+= x+=y x=x+y
-= x-=y x=x-y
*= x*=y x=x*y
/= x/=y x=x/y
.= x.=y x=x.y
%= x%=y x=x%y
Comparison Operators
Logical Operators
The if, elseif and else statements in PHP are used to perform different actions based on
different conditions.
Conditional Statements
Very often when you write code, you want to perform different actions for different decisions.
• if...else statement - use this statement if you want to execute a set of code when a
condition is true and another if the condition is not true
• elseif statement - is used with the if...else statement to execute a set of code if one of
several condition are true
The If...Else Statement
If you want to execute some code if a condition is true and another code if a condition is false, use
the if....else statement.
Syntax
if (condition)
code to be executed if condition is true;
else
code to be executed if condition is false;
Example
The following example will output "Have a nice weekend!" if the current day is Friday, otherwise it
will output "Have a nice day!":
<html>
<body>
<?php
$d=date("D");
if ($d=="Fri")
echo "Have a nice weekend!";
else
echo "Have a nice day!";
?>
</body>
</html>
If more than one line should be executed if a condition is true/false, the lines should be enclosed
within curly braces:
<html>
<body>
<?php
$d=date("D");
if ($d=="Fri")
{
echo "Hello!<br />";
echo "Have a nice weekend!";
echo "See you on Monday!";
}
?>
</body>
</html>
If you want to execute some code if one of several conditions are true use the elseif statement
Syntax
if (condition)
code to be executed if condition is true;
elseif (condition)
code to be executed if condition is true;
else
code to be executed if condition is false;
Example
The following example will output "Have a nice weekend!" if the current day is Friday, and "Have a
nice Sunday!" if the current day is Sunday. Otherwise it will output "Have a nice day!":
<html>
<body>
<?php
$d=date("D");
if ($d=="Fri")
echo "Have a nice weekend!";
elseif ($d=="Sun")
echo "Have a nice Sunday!";
else
echo "Have a nice day!";
?>
</body>
</html>
The Switch statement in PHP is used to perform one of several different actions based on
one of several different conditions.
If you want to select one of many blocks of code to be executed, use the Switch statement.
Syntax
switch (expression)
{
case label1:
code to be executed if expression = label1;
break;
case label2:
code to be executed if expression = label2;
break;
default:
code to be executed
if expression is different
from both label1 and label2;
}
Example
<html>
<body>
<?php
switch ($x)
{
case 1:
echo "Number 1";
break;
case 2:
echo "Number 2";
break;
case 3:
echo "Number 3";
break;
default:
echo "No number between 1 and 3";
}
?>
</body>
</html>
What is an array?
When working with PHP, sooner or later, you might want to create many similar variables.
Instead of having many similar variables, you can store the data as elements in an array.
Each element in the array has its own ID so that it can be easily accessed.
Numeric Arrays
Example 1
Example 2
$names[0] = "Peter";
$names[1] = "Quagmire";
$names[2] = "Joe";
<?php
$names[0] = "Peter";
$names[1] = "Quagmire";
$names[2] = "Joe";
echo $names[1] . " and " . $names[2] .
" are ". $names[0] . "'s neighbors";
?>
Associative Arrays
When storing data about specific named values, a numerical array is not always the best way to do
it.
With associative arrays we can use the values as keys and assign values to them.
Example 1
Example 2
This example is the same as example 1, but shows a different way of creating the array:
$ages['Peter'] = "32";
$ages['Quagmire'] = "30";
$ages['Joe'] = "34";
<?php
$ages['Peter'] = "32";
$ages['Quagmire'] = "30";
$ages['Joe'] = "34";
echo "Peter is " . $ages['Peter'] . " years old.";
?>
Multidimensional Arrays
In a multidimensional array, each element in the main array can also be an array. And each element
in the sub-array can be an array, and so on.
Example
$families = array
(
"Griffin"=>array
(
"Peter",
"Lois",
"Megan"
),
"Quagmire"=>array
(
"Glenn"
),
"Brown"=>array
(
"Cleveland",
"Loretta",
"Junior"
)
);
The array above would look like this if written to the output:
Array
(
[Griffin] => Array
(
[0] => Peter
[1] => Lois
[2] => Megan
)
[Quagmire] => Array
(
[0] => Glenn
)
[Brown] => Array
(
[0] => Cleveland
[1] => Loretta
[2] => Junior
)
)
Example 2
Looping statements in PHP are used to execute the same block of code a specified
number of times.
Looping
Very often when you write code, you want the same block of code to run a number of times. You
can use looping statements in your code to perform this.
• while - loops through a block of code if and as long as a specified condition is true
• do...while - loops through a block of code once, and then repeats the loop as long as a
special condition is true
• for - loops through a block of code a specified number of times
• foreach - loops through a block of code for each element in an array
The while statement will execute a block of code if and as long as a condition is true.
Syntax
while (condition)
code to be executed;
Example
The following example demonstrates a loop that will continue to run as long as the variable i is less
than, or equal to 5. i will increase by 1 each time the loop runs:
<html>
<body>
<?php
$i=1;
while($i<=5)
{
echo "The number is " . $i . "<br />";
$i++;
}
?>
</body>
</html>
The do...while statement will execute a block of code at least once - it then will repeat the loop as
long as a condition is true.
Syntax
do
{
code to be executed;
}
while (condition);
Example
The following example will increment the value of i at least once, and it will continue incrementing
the variable i as long as it has a value of less than 5:
<html>
<body>
<?php
$i=0;
do
{
$i++;
echo "The number is " . $i . "<br />";
}
while ($i<5);
?>
</body>
</html>
The for statement is used when you know how many times you want to execute a statement or a
list of statements.
Syntax
Example
The following example prints the text "Hello World!" five times:
<html>
<body>
<?php
for ($i=1; $i<=5; $i++)
{
echo "Hello World!<br />";
}
?>
</body>
</html>
For every loop, the value of the current array element is assigned to $value (and the array pointer is
moved by one) - so on the next loop, you'll be looking at the next element.
Syntax
Example
The following example demonstrates a loop that will print the values of the given array:
<html>
<body>
<?php
$arr=array("one", "two", "three");
foreach ($arr as $value)
{
echo "Value: " . $value . "<br />";
}
?>
</body>
</html>
Example
<html>
<body>
<?php
function writeMyName()
{
echo "Kai Jim Refsnes";
}
writeMyName();
?>
</body>
</html>
<html>
<body>
<?php
function writeMyName()
{
echo "Kai Jim Refsnes";
}
echo "Hello world!<br />";
echo "My name is ";
writeMyName();
echo ".<br />That's right, ";
writeMyName();
echo " is my name.";
?>
</body>
</html>
Our first function (writeMyName()) is a very simple function. It only writes a static string.
To add more functionality to a function, we can add parameters. A parameter is just like a variable.
You may have noticed the parentheses after the function name, like: writeMyName(). The
parameters are specified inside the parentheses.
Example 1
The following example will write different first names, but the same last name:
<html>
<body>
<?php
function writeMyName($fname)
{
echo $fname . " Refsnes.<br />";
}
echo "My name is ";
writeMyName("Kai Jim");
echo "My name is ";
writeMyName("Hege");
echo "My name is ";
writeMyName("Stale");
?>
</body>
</html>
Example 2
<html>
<body>
<?php
function writeMyName($fname,$punctuation)
{
echo $fname . " Refsnes" . $punctuation . "<br />";
}
echo "My name is ";
writeMyName("Kai Jim",".");
echo "My name is ";
writeMyName("Hege","!");
echo "My name is ";
writeMyName("Ståle","...");
?>
</body>
</html>
Example
<html>
<body>
<?php
function add($x,$y)
{
$total = $x + $y;
return $total;
}
echo "1 + 16 = " . add(1,16);
?>
</body>
</html>
1 + 16 = 17
The PHP $_GET and $_POST variables are used to retrieve information from forms, like
user input.
The most important thing to notice when dealing with HTML forms and PHP is that any form element
in an HTML page will automatically be available to your PHP scripts.
Form example:
<html>
<body>
<form action="welcome.php" method="post">
Name: <input type="text" name="name" />
Age: <input type="text" name="age" />
<input type="submit" />
</form>
</body>
</html>
The example HTML page above contains two input fields and a submit button. When the user fills in
this form and click on the submit button, the form data is sent to the "welcome.php" file.
<html>
<body>
Welcome <?php echo $_POST["name"]; ?>.<br />
You are <?php echo $_POST["age"]; ?> years old.
</body>
</html>
Welcome John.
You are 28 years old.
The PHP $_GET and $_POST variables will be explained in the next chapters.
Form Validation
User input should be validated whenever possible. Client side validation is faster, and will reduce
server load.
However, any site that gets enough traffic to worry about server resources may also need to worry
about site security. You should always use server side validation if the form accesses a database.
A good way to validate a form on the server is to post the form to itself, instead of jumping to a
different page. The user will then get the error messages on the same page as the form. This makes
it easier to discover the error.
The $_GET variable is used to collect values from a form with method="get".
The $_GET variable is an array of variable names and values sent by the HTTP GET method.
The $_GET variable is used to collect values from a form with method="get". Information sent from
a form with the GET method is visible to everyone (it will be displayed in the browser's address bar)
and it has limits on the amount of information to send (max. 100 characters).
Example
http://www.w3schools.com/welcome.php?name=Peter&age=37
The "welcome.php" file can now use the $_GET variable to catch the form data (notice that the
names of the form fields will automatically be the ID keys in the $_GET array):
Note: When using the $_GET variable all variable names and values are displayed in the URL. So
this method should not be used when sending passwords or other sensitive information! However,
because the variables are displayed in the URL, it is possible to bookmark the page. This can be
useful in some cases.
Note: The HTTP GET method is not suitable on large variable values; the value cannot exceed 100
characters.
The PHP $_REQUEST variable contains the contents of both $_GET, $_POST, and $_COOKIE.
The PHP $_REQUEST variable can be used to get the result from form data sent with both the GET
and POST methods.
Example
The $_POST variable is used to collect values from a form with method="post".
The $_POST variable is an array of variable names and values sent by the HTTP POST method.
The $_POST variable is used to collect values from a form with method="post". Information sent
from a form with the POST method is invisible to others and has no limits on the amount of
information to send.
Example
http://www.w3schools.com/welcome.php
The "welcome.php" file can now use the $_POST variable to catch the form data (notice that the
names of the form fields will automatically be the ID keys in the $_POST array):
• Variables sent with HTTP POST are not shown in the URL
• Variables have no length limit
However, because the variables are not displayed in the URL, it is not possible to bookmark the
page.
The PHP $_REQUEST variable contains the contents of both $_GET, $_POST, and $_COOKIE.
The PHP $_REQUEST variable can be used to get the result from form data sent with both the GET
and POST methods.
Example
The PHP date() function formats a timestamp to a more readable date and time.
Syntax
date(format,timestamp)
Parameter Description
format Required. Specifies the format of the timestamp
timestamp Optional. Specifies a timestamp. Default is the current date and time (as a
timestamp)
The first parameter in the date() function specifies how to format the date/time. It uses letters to
represent date and time formats. Here are some of the letters that can be used:
An overview of all the letters that can be used in the format parameter, Other characters, like"/",
".", or "-" can also be inserted between the letters to add additional formatting:
<?php
echo date("Y/m/d");
echo "<br />";
echo date("Y.m.d");
echo "<br />";
echo date("Y-m-d");
?>
2006/07/11
2006.07.11
2006-07-11
The second parameter in the date() function specifies a timestamp. This parameter is optional. If
you do not supply a timestamp, the current time will be used.
In our next example we will use the mktime() function to create a timestamp for tomorrow.
The mktime() function returns the Unix timestamp for a specified date.
Syntax
mktime(hour,minute,second,month,day,year,is_dst)
To go one day in the future we simply add one to the day argument of mktime():
<?php
$tomorrow = mktime(0,0,0,date("m"),date("d")+1,date("Y"));
echo "Tomorrow is ".date("Y/m/d", $tomorrow);
?>
You can insert the content of a file into a PHP file before the server executes it, with the include() or
require() function. The two functions are identical in every way, except how they handle errors. The
include() function generates a warning (but the script will continue execution) while the require()
function generates a fatal error (and the script execution will stop after the error).
These two functions are used to create functions, headers, footers, or elements that can be reused
on multiple pages.
This can save the developer a considerable amount of time. This means that you can create a
standard header or menu file that you want all your web pages to include. When the header needs
to be updated, you can only update this one include file, or when you add a new page to your site,
you can simply change the menu file (instead of updating the links on all web pages).
The include() function takes all the text in a specified file and copies it into the file that uses the
include function.
Example 1
Assume that you have a standard header file, called "header.php". To include the header file in a
page, use the include() function, like this:
<html>
<body>
<?php include("header.php"); ?>
<h1>Welcome to my home page</h1>
<p>Some text</p>
</body>
</html>
Example 2
Now, let's assume we have a standard menu file that should be used on all pages (include files
usually have a ".php" extension). Look at the "menu.php" file below:
<html>
<body>
<a href="http://www.w3schools.com/default.php">Home</a> |
<a href="http://www.w3schools.com/about.php">About Us</a> |
<a href="http://www.w3schools.com/contact.php">Contact Us</a>
The three files, "default.php", "about.php", and "contact.php" should all include the "menu.php" file.
Here is the code in "default.php":
<?php include("menu.php"); ?>
<h1>Welcome to my home page</h1>
<p>Some text</p>
</body>
</html>
If you look at the source code of the "default.php" in a browser, it will look something like this:
<html>
<body>
<a href="default.php">Home</a> |
<a href="about.php">About Us</a> |
<a href="contact.php">Contact Us</a>
<h1>Welcome to my home page</h1>
<p>Some text</p>
</body>
</html>
And, of course, we would have to do the same thing for "about.php" and "contact.php". By using
include files, you simply have to update the text in the "menu.php" file if you decide to rename or
change the order of the links or add another web page to the site.
The require() function is identical to include(), except that it handles errors differently.
The include() function generates a warning (but the script will continue execution) while the
require() function generates a fatal error (and the script execution will stop after the error).
If you include a file with the include() function and an error occurs, you might get an error message
like the one below.
PHP code:
<html>
<body>
<?php
include("wrongFile.php");
echo "Hello World!";
?>
</body>
</html>
Error message:
Notice that the echo statement is still executed! This is because a Warning does not stop the script
execution.
Now, let's run the same example with the require() function.
PHP code:
<html>
<body>
<?php
require("wrongFile.php");
echo "Hello World!";
?>
</body>
</html>
Error message:
The echo statement was not executed because the script execution stopped after the fatal error.
It is recommended to use the require() function instead of include(), because scripts should not
continue executing if files are missing or misnamed.
Opening a File
The first parameter of this function contains the name of the file to be opened and the second
parameter specifies in which mode the file should be opened:
<html>
<body>
<?php
$file=fopen("welcome.txt","r");
?>
</body>
</html>
Note: If the fopen() function is unable to open the specified file, it returns 0 (false).
Example
The following example generates a message if the fopen() function is unable to open the specified
file:
<html>
<body>
<?php
$file=fopen("welcome.txt","r") or exit("Unable to open file!");
?>
</body>
</html>
Closing a File
<?php
$file = fopen("test.txt","r");
//some code to be executed
fclose($file);
?>
Check End-of-file
The feof() function checks if the "end-of-file" (EOF) has been reached.
The feof() function is useful for looping through data of unknown length.
Example
The example below reads a file line by line, until the end of file is reached:
<?php
$file = fopen("welcome.txt", "r") or exit("Unable to open file!");
//Output a line of the file until the end is reached
while(!feof($file))
{
echo fgets($file). "<br />";
}
fclose($file);
?>
Note: After a call to this function the file pointer moves to the next character.
Example
The example below reads a file character by character, until the end of file is reached:
<?php
$file=fopen("welcome.txt","r") or exit("Unable to open file!");
while (!feof($file))
{
echo fgetc($file);
}
fclose($file);
?>
<html>
<body>
<form action="upload_file.php" method="post"
enctype="multipart/form-data">
<label for="file">Filename:</label>
<input type="file" name="file" id="file" />
<br />
<input type="submit" name="submit" value="Submit" />
</form>
</body>
</html>
• The enctype attribute of the <form> tag specifies which content-type to use when
submitting the form. "multipart/form-data" is used when a form requires binary data, like
the contents of a file, to be uploaded
• The type="file" attribute of the <input> tag specifies that the input should be processed as
a file. For example, when viewed in a browser, there will be a browse-button next to the
input field
Note: Allowing users to upload files is a big security risk. Only permit trusted users to perform file
uploads.
<?php
if ($_FILES["file"]["error"] > 0)
{
echo "Error: " . $_FILES["file"]["error"] . "<br />";
}
else
{
echo "Upload: " . $_FILES["file"]["name"] . "<br />";
echo "Type: " . $_FILES["file"]["type"] . "<br />";
echo "Size: " . ($_FILES["file"]["size"] / 1024) . " Kb<br />";
echo "Stored in: " . $_FILES["file"]["tmp_name"];
}
?>
By using the global PHP $_FILES array you can upload files from a client computer to the remote
server.
The first parameter is the form's input name and the second index can be either "name", "type",
"size", "tmp_name" or "error". Like this:
This is a very simple way of uploading files. For security reasons, you should add restrictions on
what the user is allowed to upload.
Restrictions on Upload
In this script we add some restrictions to the file upload. The user may only upload .gif or .jpeg files
and the file size must be under 20 kb:
<?php
if ((($_FILES["file"]["type"] == "image/gif")
|| ($_FILES["file"]["type"] == "image/jpeg")
|| ($_FILES["file"]["type"] == "image/pjpeg"))
&& ($_FILES["file"]["size"] < 20000))
{
if ($_FILES["file"]["error"] > 0)
{
echo "Error: " . $_FILES["file"]["error"] . "<br />";
}
else
{
echo "Upload: " . $_FILES["file"]["name"] . "<br />";
echo "Type: " . $_FILES["file"]["type"] . "<br />";
echo "Size: " . ($_FILES["file"]["size"] / 1024) . " Kb<br />";
echo "Stored in: " . $_FILES["file"]["tmp_name"];
}
}
else
{
echo "Invalid file";
}
?>
Note: For IE to recognize jpg files the type must be pjpeg, for FireFox it must be jpeg.
The examples above create a temporary copy of the uploaded files in the PHP temp folder on the
server.
The temporary copied files disappears when the script ends. To store the uploaded file we need to
copy it to a different location:
<?php
if ((($_FILES["file"]["type"] == "image/gif")
|| ($_FILES["file"]["type"] == "image/jpeg")
|| ($_FILES["file"]["type"] == "image/pjpeg"))
&& ($_FILES["file"]["size"] < 20000))
{
if ($_FILES["file"]["error"] > 0)
{
echo "Return Code: " . $_FILES["file"]["error"] . "<br />";
}
else
{
echo "Upload: " . $_FILES["file"]["name"] . "<br />";
echo "Type: " . $_FILES["file"]["type"] . "<br />";
echo "Size: " . ($_FILES["file"]["size"] / 1024) . " Kb<br />";
echo "Temp file: " . $_FILES["file"]["tmp_name"] . "<br />";
if (file_exists("upload/" . $_FILES["file"]["name"]))
{
echo $_FILES["file"]["name"] . " already exists. ";
}
else
{
move_uploaded_file($_FILES["file"]["tmp_name"],
"upload/" . $_FILES["file"]["name"]);
echo "Stored in: " . "upload/" . $_FILES["file"]["name"];
}
}
}
else
{
echo "Invalid file";
}
?>
The script above checks if the file already exists, if it does not, it copies the file to the specified
folder.
Note: This example saves the file to a new folder called "upload"
What is a Cookie?
A cookie is often used to identify a user. A cookie is a small file that the server embeds on the user's
computer. Each time the same computer requests a page with a browser, it will send the cookie too.
With PHP, you can both create and retrieve cookie values.
Note: The setcookie() function must appear BEFORE the <html> tag.
Syntax
Example
In the example below, we will create a cookie named "user" and assign the value "Alex Porter" to it.
We also specify that the cookie should expire after one hour:
<?php
setcookie("user", "Alex Porter", time()+3600);
?>
<html>
<body>
</body>
</html>
Note: The value of the cookie is automatically URLencoded when sending the cookie, and
automatically decoded when received (to prevent URLencoding, use setrawcookie() instead).
How to Retrieve a Cookie Value?
In the example below, we retrieve the value of the cookie named "user" and display it on a page:
<?php
// Print a cookie
echo $_COOKIE["user"];
// A way to view all cookies
print_r($_COOKIE);
?>
In the following example we use the isset() function to find out if a cookie has been set:
<html>
<body>
<?php
if (isset($_COOKIE["user"]))
echo "Welcome " . $_COOKIE["user"] . "!<br />";
else
echo "Welcome guest!<br />";
?>
</body>
</html>
When deleting a cookie you should assure that the expiration date is in the past.
Delete example:
<?php
// set the expiration date to one hour ago
setcookie("user", "", time()-3600);
?>
If your application deals with browsers that do not support cookies, you will have to use other
methods to pass information from one page to another in your application. One method is to pass
the data through forms (forms and user input are described earlier in this tutorial).
The form below passes the user input to "welcome.php" when the user clicks on the "Submit"
button:
<html>
<body>
<form action="welcome.php" method="post">
Name: <input type="text" name="name" />
Age: <input type="text" name="age" />
<input type="submit" />
</form>
</body>
</html>
<html>
<body>
Welcome <?php echo $_POST["name"]; ?>.<br />
You are <?php echo $_POST["age"]; ?> years old.
</body>
</html>
A PHP session variable is used to store information about, or change settings for a user
session. Session variables hold information about one single user, and are available to all
pages in one application.
When you are working with an application, you open it, do some changes and then you close it. This
is much like a Session. The computer knows who you are. It knows when you start the application
and when you end. But on the internet there is one problem: the web server does not know who
you are and what you do because the HTTP address doesn't maintain state.
A PHP session solves this problem by allowing you to store user information on the server for later
use (i.e. username, shopping items, etc). However, session information is temporary and will be
deleted after the user has left the website. If you need a permanent storage you may want to store
the data in a database.
Sessions work by creating a unique id (UID) for each visitor and store variables based on this UID.
The UID is either stored in a cookie or is propagated in the URL.
Before you can store user information in your PHP session, you must first start up the session.
Note: The session_start() function must appear BEFORE the <html> tag:
The code above will register the user's session with the server, allow you to start saving user
information, and assign a UID for that user's session.
The correct way to store and retrieve session variables is to use the PHP $_SESSION variable:
<?php
session_start();
// store session data
$_SESSION['views']=1;
?>
<html>
<body>
<?php
//retrieve session data
echo "Pageviews=". $_SESSION['views'];
?>
</body>
</html>
Output:
Pageviews=1
In the example below, we create a simple page-views counter. The isset() function checks if the
"views" variable has already been set. If "views" has been set, we can increment our counter. If
"views" doesn't exist, we create a "views" variable, and set it to 1:
<?php
session_start();
if(isset($_SESSION['views']))
$_SESSION['views']=$_SESSION['views']+1;
else
$_SESSION['views']=1;
echo "Views=". $_SESSION['views'];
?>
Destroying a Session
If you wish to delete some session data, you can use the unset() or the session_destroy() function.
<?php
unset($_SESSION['views']);
?>
You can also completely destroy the session by calling the session_destroy() function:
<?php
session_destroy();
?>
Note: session_destroy() will reset your session and you will lose all your stored session data.
Syntax
mail(to,subject,message,headers,parameters)
Parameter Description
to Required. Specifies the receiver / receivers of the email
subject Required. Specifies the subject of the email. Note: This parameter cannot
contain any newline characters
message Required. Defines the message to be sent. Each line should be separated with a
LF (\n). Lines should not exceed 70 characters
headers Optional. Specifies additional headers, like From, Cc, and Bcc. The additional
headers should be separated with a CRLF (\r\n)
parameters Optional. Specifies an additional parameter to the sendmail program
Note: For the mail functions to be available, PHP requires an installed and working email system.
The program to be used is defined by the configuration settings in the php.ini file.
The simplest way to send an email with PHP is to send a text email.
In the example below we first declare the variables ($to, $subject, $message, $from, $headers),
then we use the variables in the mail() function to send an e-mail:
<?php
$to = "someone@example.com";
$subject = "Test mail";
$message = "Hello! This is a simple email message.";
$from = "someonelse@example.com";
$headers = "From: $from";
mail($to,$subject,$message,$headers);
echo "Mail Sent.";
?>
With PHP, you can create a feedback-form on your website. The example below sends a text
message to a specified e-mail address:
<html>
<body>
<?php
if (isset($_REQUEST['email']))
//if "email" is filled out, send email
{
//send email
$email = $_REQUEST['email'] ;
$subject = $_REQUEST['subject'] ;
$message = $_REQUEST['message'] ;
mail( "someone@example.com", "Subject: $subject",
$message, "From: $email" );
echo "Thank you for using our mail form";
}
else
//if "email" is not filled out, display the form
{
echo "<form method='post' action='mailform.php'>
Email: <input name='email' type='text' /><br />
Subject: <input name='subject' type='text' /><br />
Message:<br />
<textarea name='message' rows='15' cols='40'>
</textarea><br />
<input type='submit' />
</form>";
}
?>
</body>
</html>
Note: This is the simplest way to send e-mail, but it is not secure. In the next chapter of this
tutorial you can read more about vulnerabilities in e-mail scripts, and how to validate user input to
make it more secure.
<html>
<body>
<?php
if (isset($_REQUEST['email']))
//if "email" is filled out, send email
{
//send email
$email = $_REQUEST['email'] ;
$subject = $_REQUEST['subject'] ;
$message = $_REQUEST['message'] ;
mail("someone@example.com", "Subject: $subject",
$message, "From: $email" );
echo "Thank you for using our mail form";
}
else
//if "email" is not filled out, display the form
{
echo "<form method='post' action='mailform.php'>
Email: <input name='email' type='text' /><br />
Subject: <input name='subject' type='text' /><br />
Message:<br />
<textarea name='message' rows='15' cols='40'>
</textarea><br />
<input type='submit' />
</form>";
}
?>
</body>
</html>
The problem with the code above is that unauthorized users can insert data into the mail headers
via the input form.
What happens if the user adds the following text to the email input field in the form?
someone@example.com%0ACc:person2@example.com
%0ABcc:person3@example.com,person3@example.com,
anotherperson4@example.com,person5@example.com
%0ABTo:person6@example.com
The mail() function puts the text above into the mail headers as usual, and now the header has an
extra Cc:, Bcc:, and To: field. When the user clicks the submit button, the e-mail will be sent to all
of the addresses above!
The code below is the same as in the previous chapter, but now we have added an input validator
that checks the email field in the form:
<html>
<body>
<?php
function spamcheck($field)
{
//filter_var() sanitizes the e-mail
//address using FILTER_SANITIZE_EMAIL
$field=filter_var($field, FILTER_SANITIZE_EMAIL);
• The FILTER_SANITIZE_EMAIL filter removes all illegal e-mail characters from a string
• The FILTER_VALIDATE_EMAIL filter validates value as an e-mail address
The default error handling in PHP is very simple. An error message with filename, line
number and a message describing the error is sent to the browser.
When creating scripts and web applications, error handling is an important part. If your code lacks
error checking code, your program may look very unprofessional and you may be open to security
risks.
This tutorial contains some of the most common error checking methods in PHP.
The first example shows a simple script that opens a text file:
<?php
$file=fopen("welcome.txt","r");
?>
If the file does not exist you might get an error like this:
To avoid that the user gets an error message like the one above, we test if the file exist before we
try to access it:
<?php
if(!file_exists("welcome.txt"))
{
die("File not found");
}
else
{
$file=fopen("welcome.txt","r");
}
?>
Now if the file does not exist you get an error like this:
The code above is more efficient than the earlier code, because it uses a simple error handling
mechanism to stop the script after the error.
However, simply stopping the script is not always the right way to go. Let's take a look at alternative
PHP functions for handling errors.
Creating a custom error handler is quite simple. We simply create a special function that can be
called when an error occurs in PHP.
This function must be able to handle a minimum of two parameters (error level and error message)
but can accept up to five parameters (optionally: file, line-number, and the error context):
Syntax
error_function(error_level,error_message,
error_file,error_line,error_context)
Parameter Description
error_level Required. Specifies the error report level for the user-defined error. Must be a
value number. See table below for possible error report levels
error_message Required. Specifies the error message for the user-defined error
error_file Optional. Specifies the filename in which the error occurred
error_line Optional. Specifies the line number in which the error occurred
error_context Optional. Specifies an array containing every variable, and their values, in use
when the error occurred
These error report levels are the different types of error the user-defined error handler can be used
for:
The code above is a simple error handling function. When it is triggered, it gets the error level and
an error message. It then outputs the error level and message and terminates the script.
Now that we have created an error handling function we need to decide when it should be triggered.
The default error handler for PHP is the built in error handler. We are going to make the function
above the default error handler for the duration of the script.
It is possible to change the error handler to apply for only some errors, that way the script can
handle different errors in different ways. However, in this example we are going to use our custom
error handler for all errors:
set_error_handler("customError");
Since we want our custom function to handle all errors, the set_error_handler() only needed one
parameter, a second parameter could be added to specify an error level.
Example
Testing the error handler by trying to output variable that does not exist:
<?php
//error handler function
function customError($errno, $errstr)
{
echo "<b>Error:</b> [$errno] $errstr";
}
//set error handler
set_error_handler("customError");
//trigger error
echo($test);
?>
Trigger an Error
In a script where users can input data it is useful to trigger errors when an illegal input occurs. In
PHP, this is done by the trigger_error() function.
Example
In this example an error occurs if the "test" variable is bigger than "1":
<?php
$test=2;
if ($test>1)
{
trigger_error("Value must be 1 or below");
}
?>
An error can be triggered anywhere you wish in a script, and by adding a second parameter, you
can specify what error level is triggered.
• E_USER_ERROR - Fatal user-generated run-time error. Errors that can not be recovered
from. Execution of the script is halted
• E_USER_WARNING - Non-fatal user-generated run-time warning. Execution of the script is
not halted
• E_USER_NOTICE - Default. User-generated run-time notice. The script found something
that might be an error, but could also happen when running a script normally
Example
In this example an E_USER_WARNING occurs if the "test" variable is bigger than "1". If an
E_USER_WARNING occurs we will use our custom error handler and end the script:
<?php
//error handler function
function customError($errno, $errstr)
{
echo "<b>Error:</b> [$errno] $errstr<br />";
echo "Ending Script";
die();
}
//set error handler
set_error_handler("customError",E_USER_WARNING);
//trigger error
$test=2;
if ($test>1)
{
trigger_error("Value must be 1 or below",E_USER_WARNING);
}
?>
Now that we have learned to create our own errors and how to trigger them, lets take a look at
error logging.
Error Logging
By default, PHP sends an error log to the servers logging system or a file, depending on how the
error_log configuration is set in the php.ini file. By using the error_log() function you can send error
logs to a specified file or a remote destination.
Sending errors messages to yourself by e-mail can be a good way of getting notified of specific
errors.
In the example below we will send an e-mail with an error message and end the script, if a specific
error occurs:
<?php
//error handler function
function customError($errno, $errstr)
{
echo "<b>Error:</b> [$errno] $errstr<br />";
echo "Webmaster has been notified";
error_log("Error: [$errno] $errstr",1,
"someone@example.com","From: webmaster@example.com");
}
//set error handler
set_error_handler("customError",E_USER_WARNING);
//trigger error
$test=2;
if ($test>1)
{
trigger_error("Value must be 1 or below",E_USER_WARNING);
}
?>
And the mail received from the code above looks like this:
This should not be used with all errors. Regular errors should be logged on the server using the
default PHP logging system.
Exceptions are used to change the normal flow of a script if a specified error occurs
What is an Exception
With PHP 5 came a new object oriented way of dealing with errors.
Exception handling is used to change the normal flow of the code execution if a specified error
(exceptional) condition occurs. This condition is called an exception.
When an exception is thrown, the code following it will not be executed, and PHP will try to find the
matching "catch" block.
If an exception is not caught, a fatal error will be issued with an "Uncaught Exception" message.
<?php
//create function with an exception
function checkNum($number)
{
if($number>1)
{
throw new Exception("Value must be 1 or below");
}
return true;
}
//trigger exception
checkNum(2);
?>
To avoid the error from the example above, we need to create the proper code to handle an
exception.
1. Try - A function using an exception should be in a "try" block. If the exception does not
trigger, the code will continue as normal. However if the exception triggers, an exception is
"thrown"
2. Throw - This is how you trigger an exception. Each "throw" must have at least one "catch"
3. Catch - A "catch" block retrieves an exception and creates an object containing the
exception information
<?php
//create function with an exception
function checkNum($number)
{
if($number>1)
{
throw new Exception("Value must be 1 or below");
}
return true;
}
//catch exception
catch(Exception $e)
{
echo 'Message: ' .$e->getMessage();
}
?>
Example explained:
However, one way to get around the "every throw must have a catch" rule is to set a top level
exception handler to handle errors that slip through.
Creating a custom exception handler is quite simple. We simply create a special class with functions
that can be called when an exception occurs in PHP. The class must be an extension of the exception
class.
The custom exception class inherits the properties from PHP's exception class and you can add
custom functions to it.
<?php
class customException extends Exception
{
public function errorMessage()
{
//error message
$errorMsg = 'Error on line '.$this->getLine().' in '.$this->getFile()
.': <b>'.$this->getMessage().'</b> is not a valid E-Mail address';
return $errorMsg;
}
}
$email = "someone@example...com";
try
{
//check if
if(filter_var($email, FILTER_VALIDATE_EMAIL) === FALSE)
{
//throw exception if email is not valid
throw new customException($email);
}
}
catch (customException $e)
{
//display custom message
echo $e->errorMessage();
}
?>
The new class is a copy of the old exception class with an addition of the errorMessage() function.
Since it is a copy of the old class, and it inherits the properties and methods from the old class, we
can use the exception class methods like getLine() and getFile() and getMessage().
Example explained:
The code above throws an exception and catches it with a custom exception class:
1. The customException() class is created as an extension of the old exception class. This way
it inherits all methods and properties from the old exception class
2. The errorMessage() function is created. This function returns an error message if an e-mail
address is invalid
3. The $email variable is set to a string that is not a valid e-mail address
4. The "try" block is executed and an exception is thrown since the e-mail address is invalid
5. The "catch" block catches the exception and displays the error message
Multiple Exceptions
It is possible for a script to use multiple exceptions to check for multiple conditions.
It is possible to use several if..else blocks, a switch, or nest multiple exceptions. These exceptions
can use different exception classes and return different error messages:
<?php
class customException extends Exception
{
public function errorMessage()
{
//error message
$errorMsg = 'Error on line '.$this->getLine().' in '.$this->getFile()
.': <b>'.$this->getMessage().'</b> is not a valid E-Mail address';
return $errorMsg;
}
}
$email = "someone@example.com";
try
{
//check if
if(filter_var($email, FILTER_VALIDATE_EMAIL) === FALSE)
{
//throw exception if email is not valid
throw new customException($email);
}
//check for "example" in mail address
if(strpos($email, "example") !== FALSE)
{
throw new Exception("$email is an example e-mail");
}
}
Example explained:
The code above tests two conditions and throws an exception if any of the conditions are not met:
1. The customException() class is created as an extension of the old exception class. This way
it inherits all methods and properties from the old exception class
2. The errorMessage() function is created. This function returns an error message if an e-mail
address is invalid
3. The $email variable is set to a string that is a valid e-mail address, but contains the string
"example"
4. The "try" block is executed and an exception is not thrown on the first condition
5. The second condition triggers an exception since the e-mail contains the string "example"
6. The "catch" block catches the exception and displays the correct error message
If there was no customException catch, only the base exception catch, the exception would be
handled there
Re-throwing Exceptions
Sometimes, when an exception is thrown, you may wish to handle it differently than the standard
way. It is possible to throw an exception a second time within a "catch" block.
A script should hide system errors from users. System errors may be important for the coder, but is
of no interest to the user. To make things easier for the user you can re-throw the exception with a
user friendly message:
<?php
class customException extends Exception
{
public function errorMessage()
{
//error message
$errorMsg = $this->getMessage().' is not a valid E-Mail address.';
return $errorMsg;
}
}
$email = "someone@example.com";
try
{
try
{
//check for "example" in mail address
if(strpos($email, "example") !== FALSE)
{
//throw exception if email is not valid
throw new Exception($email);
}
}
catch(Exception $e)
{
//re-throw exception
throw new customException($email);
}
}
catch (customException $e)
{
//display custom message
echo $e->errorMessage();
}
?>
Example explained:
The code above tests if the email-address contains the string "example" in it, if it does, the
exception is re-thrown:
1. The customException() class is created as an extension of the old exception class. This way
it inherits all methods and properties from the old exception class
2. The errorMessage() function is created. This function returns an error message if an e-mail
address is invalid
3. The $email variable is set to a string that is a valid e-mail address, but contains the string
"example"
4. The "try" block contains another "try" block to make it possible to re-throw the exception
5. The exception is triggered since the e-mail contains the string "example"
6. The "catch" block catches the exception and re-throws a "customException"
7. The "customException" is caught and displays an error message
If the exception is not caught in it's current "try" block, it will search for a catch block on "higher
levels".
In the code above there was no "catch" block. Instead, the top level exception handler triggered.
This function should be used to catch uncaught exceptions.
PHP filters are used to validate and filter data coming from insecure sources, like user
input.
A PHP filter is used to validate and filter data coming from insecure sources.
To test, validate and filter user input or custom data is an important part of any web application.
The PHP filter extension is designed to make data filtering easier and quicker.
Almost all web applications depend on external input. Usually this comes from a user or another
application (like a web service). By using filters you can be sure your application gets the correct
input type.
<?php
$int = 123;
if(!filter_var($int, FILTER_VALIDATE_INT))
{
echo("Integer is not valid");
}
else
{
echo("Integer is valid");
}
?>
The code above uses the "FILTER_VALIDATE_INT" filter to filter the variable. Since the integer is
valid, the output of the code above will be: "Integer is valid".
If we try with a variable that is not an integer (like "123abc"), the output will be: "Integer is not
valid".
Validating filters:
Sanitizing filters:
Options and flags are used to add additional filtering options to the specified filters.
In the example below, we validate an integer using the filter_var() and the "min_range" and
"max_range" options:
<?php
$var=300;
$int_options = array(
"options"=>array
(
"min_range"=>0,
"max_range"=>256
)
);
if(!filter_var($var, FILTER_VALIDATE_INT, $int_options))
{
echo("Integer is not valid");
}
else
{
echo("Integer is valid");
}
?>
Like the code above, options must be put in an associative array with the name "options". If a flag
is used it does not need to be in an array.
Since the integer is "300" it is not in the specified range, and the output of the code above will be:
"Integer is not valid".
Validate Input
The first thing we need to do is to confirm that the input data we are looking for exists.
In the example below, the input variable "email" is sent to the PHP page:
<?php
if(!filter_has_var(INPUT_GET, "email"))
{
echo("Input type does not exist");
}
else
{
if (!filter_input(INPUT_GET, "email", FILTER_VALIDATE_EMAIL))
{
echo "E-Mail is not valid";
}
else
{
echo "E-Mail is valid";
}
}
?>
Example Explained
The example above has an input (email) sent to it using the "GET" method:
Sanitize Input
First we confirm that the input data we are looking for exists.
In the example below, the input variable "url" is sent to the PHP page:
<?php
if(!filter_has_var(INPUT_POST, "url"))
{
echo("Input type does not exist");
}
else
{
$url = filter_input(INPUT_POST,"url", FILTER_SANITIZE_URL);
}
?>
Example Explained
The example above has an input (url) sent to it using the "POST" method:
If the input variable is a string like this "http://www.ååSchøøools.com/", the $url variable after the
sanitizing will look like this:
http://www.Schools.com/
A form almost always consists of more than one input field. To avoid calling the filter_var or
filter_input functions over and over, we can use the filter_var_array or the filter_input_array
functions.
In this example we use the filter_input_array() function to filter three GET variables. The received
GET variables is a name, an age and an e-mail address:
<?php
$filters = array ("name" => array ("filter"=>FILTER_SANITIZE_STRING),
"age" => array ("filter"=>FILTER_VALIDATE_INT,"options"=>array
("min_range"=>1,"max_range"=>120)),"email"=> FILTER_VALIDATE_EMAIL,);
Example Explained
The example above has three inputs (name, age and email) sent to it using the "GET" method:
1. Set an array containing the name of input variables and the filters used on the specified
input variables
2. Call the filter_input_array() function with the GET input variables and the array we just set
3. Check the "age" and "email" variables in the $result variable for invalid inputs. (If any of
the input variables are invalid, that input variable will be FALSE after the
filter_input_array() function)
The second parameter of the filter_input_array() function can be an array or a single filter ID.
If the parameter is a single filter ID all values in the input array are filtered by the specified filter.
• Must be an associative array containing an input variable as an array key (like the "age"
input variable)
• The array value must be a filter ID or an array specifying the filter, flags and options
It is possible to call a user defined function and use it as a filter using the FILTER_CALLBACK filter.
This way, we have full control of the data filtering.
You can create your own user defined function or use an existing PHP function
The function you wish to use to filter is specified the same way as an option is specified. In an
associative array with the name "options"
In the example below, we use a user created function to convert all "_" to whitespaces:
<?php
function convertSpace($string)
{
return str_replace("_", " ", $string);
}
$string = "Peter_is_a_great_guy!";
The result from the code above should look like this:
Example Explained
What is MySQL?
In a database, there are tables. Just like HTML tables, database tables contain rows, columns, and
cells.
Databases are useful when storing information categorically. A company may have a database with
the following tables: "Employees", "Products", "Customers" and "Orders".
Database Tables
A database most often contains one or more tables. Each table has a name (e.g. "Customers" or
"Orders"). Each table contains records (rows) with data.
The table above contains three records (one for each person) and four columns (LastName,
FirstName, Address, and City).
Queries
A query is a question or a request.
With MySQL, we can query a database for specific information and have a recordset returned.
The query above selects all the data in the LastName column in the Persons table, and will return a
recordset like this:
LastName
Hansen
Svendson
Pettersen
If you don't have a PHP server with a MySQL Database, you can download MySQL for free here:
http://www.mysql.com/downloads/index.html
One great thing about MySQL is that it can be scaled down to support embedded database
applications. Perhaps it is because of this reputation that many people believe that MySQL can only
handle small to medium-sized systems.
The truth is that MySQL is the de-facto standard database for web sites that support huge volumes
of both data and end users (like Friendster, Yahoo, Google). Look at
http://www.mysql.com/customers/ for an overview of companies that use MySQL.
Before you can access and work with data in a database, you must create a connection to the
database.
Syntax
mysql_connect(servername,username,password);
Parameter Description
servername Optional. Specifies the server to connect to. Default value is "localhost:3306"
username Optional. Specifies the username to log in with. Default value is the name of the
user that owns the server process
password Optional. Specifies the password to log in with. Default is ""
Note: There are more available parameters, but the ones listed above are the most important.
Example
In the following example we store the connection in a variable ($con) for later use in the script. The
"die" part will be executed if the connection fails:
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
// some code
?>
Closing a Connection
The connection will be closed as soon as the script ends. To close the connection before, use the
mysql_close() function.
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
// some code
mysql_close($con);
?>
Create a Database
Syntax
To get PHP to execute the statement above we must use the mysql_query() function. This function
is used to send a query or command to a MySQL connection.
Example
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
if (mysql_query("CREATE DATABASE my_db",$con))
{
echo "Database created";
}
else
{
echo "Error creating database: " . mysql_error();
}
mysql_close($con);
?>
Create a Table
Syntax
We must add the CREATE TABLE statement to the mysql_query() function to execute the command.
Example
The following example shows how you can create a table named "person", with three columns. The
column names will be "FirstName", "LastName" and "Age":
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
// Create database
if (mysql_query("CREATE DATABASE my_db",$con))
{
echo "Database created";
}
else
{
echo "Error creating database: " . mysql_error();
}
// Create table in my_db database
mysql_select_db("my_db", $con);
$sql = "CREATE TABLE person
(
FirstName varchar(15),
LastName varchar(15),
Age int
)";
mysql_query($sql,$con);
mysql_close($con);
?>
Important: A database must be selected before a table can be created. The database is selected
with the mysql_select_db() function.
Note: When you create a database field of type varchar, you must specify the maximum length of
the field, e.g. varchar(15).
Below are the different MySQL data types that can be used:
A primary key is used to uniquely identify the rows in a table. Each primary key value must be
unique within the table. Furthermore, the primary key field cannot be null because the database
engine requires a value to locate the record.
The primary key field is always indexed. There is no exception to this rule! You must index the
primary key field so the database engine can quickly locate rows based on the key's value.
The following example sets the personID field as the primary key field. The primary key field is
often an ID number, and is often used with the AUTO_INCREMENT setting. AUTO_INCREMENT
automatically increases the value of the field by 1 each time a new record is added. To ensure that
the primary key field cannot be null, we must add the NOT NULL setting to the field.
Example
The INSERT INTO statement is used to insert new records into a database table.
The INSERT INTO statement is used to add new records to a database table.
Syntax
You can also specify the columns where you want to insert the data:
Note: SQL statements are not case sensitive. INSERT INTO is the same as insert into.
To get PHP to execute the statements above we must use the mysql_query() function. This function
is used to send a query or command to a MySQL connection.
Example
In the previous chapter we created a table named "Person", with three columns; "Firstname",
"Lastname" and "Age". We will use the same table in this example. The following example adds two
new records to the "Person" table:
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
mysql_query("INSERT INTO person (FirstName, LastName, Age)
VALUES ('Peter', 'Griffin', '35')");
mysql_query("INSERT INTO person (FirstName, LastName, Age)
VALUES ('Glenn', 'Quagmire', '33')");
mysql_close($con);
?>
Now we will create an HTML form that can be used to add new records to the "Person" table.
<html>
<body>
<form action="insert.php" method="post">
Firstname: <input type="text" name="firstname" />
Lastname: <input type="text" name="lastname" />
Age: <input type="text" name="age" />
<input type="submit" />
</form>
</body>
</html>
When a user clicks the submit button in the HTML form in the example above, the form data is sent
to "insert.php". The "insert.php" file connects to a database, and retrieves the values from the form
with the PHP $_POST variables. Then, the mysql_query() function executes the INSERT INTO
statement, and a new record will be added to the database table.
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
$sql="INSERT INTO person (FirstName, LastName, Age)
VALUES
('$_POST[firstname]','$_POST[lastname]','$_POST[age]')";
if (!mysql_query($sql,$con))
{
die('Error: ' . mysql_error());
}
echo "1 record added";
mysql_close($con)
?>
Syntax
SELECT column_name(s)
FROM table_name
Note: SQL statements are not case sensitive. SELECT is the same as select.
To get PHP to execute the statement above we must use the mysql_query() function. This function
is used to send a query or command to a MySQL connection.
Example
The following example selects all the data stored in the "Person" table (The * character selects all of
the data in the table):
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
$result = mysql_query("SELECT * FROM person");
while($row = mysql_fetch_array($result))
{
echo $row['FirstName'] . " " . $row['LastName'];
echo "<br />";
}
mysql_close($con);
?>
The example above stores the data returned by the mysql_query() function in the $result variable.
Next, we use the mysql_fetch_array() function to return the first row from the recordset as an
array. Each subsequent call to mysql_fetch_array() returns the next row in the recordset. The while
loop loops through all the records in the recordset. To print the value of each row, we use the PHP
$row variable ($row['FirstName'] and $row['LastName']).
Peter Griffin
Glenn Quagmire
Display the Result in an HTML Table
The following example selects the same data as the example above, but will display the data in an
HTML table:
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
Firstname Lastname
Glenn Quagmire
Peter Griffin
To select only data that matches a specified criteria, add a WHERE clause to the SELECT
statement.
To select only data that matches a specific criteria, add a WHERE clause to the SELECT statement.
Syntax
Note: SQL statements are not case sensitive. WHERE is the same as where.
To get PHP to execute the statement above we must use the mysql_query() function. This function
is used to send a query or command to a MySQL connection.
Example
The following example will select all rows from the "Person" table, where FirstName='Peter':
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
while($row = mysql_fetch_array($result))
{
echo $row['FirstName'] . " " . $row['LastName'];
echo "<br />";
}
?>
Peter Griffin
Syntax
SELECT column_name(s)
FROM table_name
ORDER BY column_name
Note: SQL statements are not case sensitive. ORDER BY is the same as order by.
Example
The following example selects all the data stored in the "Person" table, and sorts the result by the
"Age" column:
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
while($row = mysql_fetch_array($result))
{
echo $row['FirstName'];
echo " " . $row['LastName'];
echo " " . $row['Age'];
echo "<br />";
}
mysql_close($con);
?>
Glenn Quagmire 33
Peter Griffin 35
If you use the ORDER BY keyword, the sort-order of the recordset is ascending by default (1 before
9 and "a" before "p").
Use the DESC keyword to specify a descending sort-order (9 before 1 and "p" before "a"):
SELECT column_name(s)
FROM table_name
ORDER BY column_name DESC
It is possible to order by more than one column. When ordering by more than one column, the
second column is only used if the values in the first column are identical:
SELECT column_name(s)
FROM table_name
ORDER BY column_name1, column_name2
Syntax
UPDATE table_name
SET column_name = new_value
WHERE column_name = some_value
Note: SQL statements are not case sensitive. UPDATE is the same as update.
To get PHP to execute the statement above we must use the mysql_query() function. This function
is used to send a query or command to a MySQL connection.
Example
Earlier in the tutorial we created a table named "Person". Here is how it looks:
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
After the update, the "Person" table will look like this:
The DELETE FROM statement is used to delete rows from a database table.
Delete Data In a Database
The DELETE FROM statement is used to delete records from a database table.
Syntax
Note: SQL statements are not case sensitive. DELETE FROM is the same as delete from.
To get PHP to execute the statement above we must use the mysql_query() function. This function
is used to send a query or command to a MySQL connection.
Example
Earlier in the tutorial we created a table named "Person". Here is how it looks:
The following example deletes all the records in the "Person" table where LastName='Griffin':
<?php
$con = mysql_connect("localhost","peter","abc123");
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("my_db", $con);
ODBC is an Application Programming Interface (API) that allows you to connect to a data
source (e.g. an MS Access database).
With an ODBC connection, you can connect to any database, on any computer in your network, as
long as an ODBC connection is available.
Note that this configuration has to be done on the computer where your web site is located. If you
are running Internet Information Server (IIS) on your own computer, the instructions above will
work, but if your web site is located on a remote server, you have to have physical access to that
server, or ask your web host to to set up a DSN for you to use.
Connecting to an ODBC
The odbc_connect() function is used to connect to an ODBC data source. The function takes four
parameters: the data source name, username, password, and an optional cursor type.
Example
The following example creates a connection to a DSN called northwind, with no username and no
password. It then creates an SQL and executes it:
$conn=odbc_connect('northwind','','');
$sql="SELECT * FROM customers";
$rs=odbc_exec($conn,$sql);
Retrieving Records
The odbc_fetch_row() function is used to return records from the result-set. This function returns
true if it is able to return rows, otherwise false.
The function takes two parameters: the ODBC result identifier and an optional row number:
odbc_fetch_row($rs)
The odbc_result() function is used to read fields from a record. This function takes two parameters:
the ODBC result identifier and a field number or name.
The code line below returns the value of the first field from the record:
$compname=odbc_result($rs,1);
The code line below returns the value of a field called "CompanyName":
$compname=odbc_result($rs,"CompanyName");
odbc_close($conn);
An ODBC Example
The following example shows how to first create a database connection, then a result-set, and then
display the data in an HTML table.
<html>
<body>
<?php
$conn=odbc_connect('northwind','','');
if (!$conn)
{exit("Connection Failed: " . $conn);}
$sql="SELECT * FROM customers";
$rs=odbc_exec($conn,$sql);
if (!$rs)
{exit("Error in SQL");}
echo "<table><tr>";
echo "<th>Companyname</th>";
echo "<th>Contactname</th></tr>";
while (odbc_fetch_row($rs))
{
$compname=odbc_result($rs,"CompanyName");
$conname=odbc_result($rs,"ContactName");
echo "<tr><td>$compname</td>";
echo "<td>$conname</td></tr>";
}
odbc_close($conn);
echo "</table>";
?>
</body>
</html>
The built-in Expat parser makes it possible to process XML documents in PHP.
What is XML?
XML is used to describe data and to focus on what data is. An XML file describes the structure of the
data.
In XML, no tags are predefined. You must define your own tags.
If you want to learn more about XML, please visit our XML tutorial.
What is Expat?
To read and update - create and manipulate - an XML document, you will need an XML parser.
• Tree-based parser: This parser transforms an XML document into a tree structure. It
analyzes the whole document, and provides access to the tree elements. e.g. the Document
Object Model (DOM)
• Event-based parser: Views an XML document as a series of events. When a specific event
occurs, it calls a function to handle it
Event-based parsers focus on the content of the XML documents, not their structure. Because of
this, event-based parsers can access data faster than tree-based parsers.
<from>Jani</from>
The XML example above contains well-formed XML. However, the example is not valid XML, because
there is no Document Type Definition (DTD) associated with it.
However, this makes no difference when using the Expat parser. Expat is a non-validating parser,
and ignores any DTDs.
As an event-based, non-validating XML parser, Expat is fast and small, and a perfect match for PHP
web applications.
Installation
The XML Expat parser functions are part of the PHP core. There is no installation needed to use
these functions.
An XML File
We want to initialize the XML parser in PHP, define some handlers for different XML events, and then
parse the XML file.
Example
<?php
//Initialize the XML parser
$parser=xml_parser_create();
//Function to use at the start of an element
function start($parser,$element_name,$element_attrs)
{
switch($element_name)
{
case "NOTE":
echo "-- Note --<br />";
break;
case "TO":
echo "To: ";
break;
case "FROM":
echo "From: ";
break;
case "HEADING":
echo "Heading: ";
break;
case "BODY":
echo "Message: ";
}
}
//Function to use at the end of an element
function stop($parser,$element_name)
{
echo "<br />";
}
//Function to use when finding character data
function char($parser,$data)
{
echo $data;
}
//Specify element handler
xml_set_element_handler($parser,"start","stop");
//Specify data handler
xml_set_character_data_handler($parser,"char");
//Open XML file
$fp=fopen("test.xml","r");
//Read data
while ($data=fread($fp,4096))
{
xml_parse($parser,$data,feof($fp)) or
die (sprintf("XML Error: %s at line %d",
xml_error_string(xml_get_error_code($parser)),
xml_get_current_line_number($parser)));
}
//Free the XML parser
xml_parser_free($parser);
?>
-- Note --
To: Tove
From: Jani
Heading: Reminder
Message: Don't forget me this weekend!
How it works:
What is DOM?
The W3C DOM provides a standard set of objects for HTML and XML documents, and a standard
interface for accessing and manipulating them.
The W3C DOM is separated into different parts (Core, XML, and HTML) and different levels (DOM
Level 1/2/3):
* Core DOM - defines a standard set of objects for any structured document
* XML DOM - defines a standard set of objects for XML documents
* HTML DOM - defines a standard set of objects for HTML documents
XML Parsing
To read and update - create and manipulate - an XML document, you will need an XML parser.
• Tree-based parser: This parser transforms an XML document into a tree structure. It
analyzes the whole document, and provides access to the tree elements
• Event-based parser: Views an XML document as a series of events. When a specific event
occurs, it calls a function to handle it
Installation
The DOM XML parser functions are part of the PHP core. There is no installation needed to use these
functions.
An XML File
We want to initialize the XML parser, load the xml, and output it:
Example
<?php
$xmlDoc = new DOMDocument();
$xmlDoc->load("note.xml");
print $xmlDoc->saveXML();
?>
If you select "View source" in the browser window, you will see the following HTML:
The example above creates a DOMDocument-Object and loads the XML from "note.xml" into it.
Then the saveXML() function to puts the internal XML document into a string, so that we can print
it.
We want to initialize the XML parser, load the XML, and loop through all elements of the <note>
element:
Example
<?php
$xmlDoc = new DOMDocument();
$xmlDoc->load("note.xml");
$x = $xmlDoc->documentElement;
foreach ($x->childNodes AS $item)
{
print $item->nodeName . " = " . $item->nodeValue . "<br />";
}
?>
#text =
to = Tove
#text =
from = Jani
#text =
heading = Reminder
#text =
body = Don't forget me this weekend!
#text =
In the example above you see that there are empty text nodes between each element.
When XML generates, it often contains white-spaces between the nodes. The XML DOM parser
treats these as ordinary elements, and if you are not aware of them, they sometimes cause
problems.
SimpleXML handles the most common XML tasks and leaves the rest for other extensions.
What is SimpleXML?
SimpleXML is new in PHP 5. It is an easy way of getting an element's attributes and text, if you
know the XML document's layout.
Compared to DOM or the Expat parser, SimpleXML just takes a few lines of code to read text data
from an element.
SimpleXML is fast and easy to use when performing basic tasks like:
However, when dealing with advanced XML, like namespaces, you are better off using the Expat
parser or the XML DOM.
Installation
As of PHP 5.0, the SimpleXML functions are part of the PHP core. There is no installation needed to
use these functions.
Using SimpleXML
We want to output the element names and data from the XML file above.
Example
<?php
$xml = simplexml_load_file("test.xml");
echo $xml->getName() . "<br />";
foreach($xml->children() as $child)
{
echo $child->getName() . ": " . $child . "<br />";
}
?>
note
to: Tove
from: Jani
heading: Reminder
body: Don't forget me this weekend!
AJAX is not a new programming language, but simply a new technique for creating better, faster,
and more interactive web applications.
AJAX uses JavaScript to send and receive data between a web browser and a web server.
The AJAX technique makes web pages more responsive by exchanging data with the web server
behind the scenes, instead of reloading an entire web page each time a user makes a change.
• JavaScript
• XML
• HTML
• CSS
The open standards used in AJAX are well defined, and supported by all major browsers. AJAX
applications are browser and platform independent. (Cross-Platform, Cross-Browser technology)
However, Internet applications are not always as "rich" and user-friendly as traditional desktop
applications.
With AJAX, Internet applications can be made richer (smaller, faster, and easier to use).
AJAX is based on open standards. These standards have been used by most developers for several
years.
Most existing web applications can be rewritten to use AJAX technology instead of traditional HTML
forms.
A traditional web application will submit input (using an HTML form) to a web server. After the web
server has processed the data, it will return a completely new web page to the user.
Because the server returns a new web page each time the user submits input, traditional web
applications often run slowly and tend to be less user friendly.
With AJAX, web applications can send and retrieve data without reloading the whole web page. This
is done by sending HTTP requests to the server (behind the scenes), and by modifying only parts of
the web page using JavaScript when the server returns data.
XML is commonly used as the format for receiving server data, although any format, including plain
text, can be used.
You will learn more about how this is done in the next chapters of this tutorial.
AJAX is a technology that runs in your browser. It uses asynchronous data transfer (HTTP requests)
between the browser and the web server, allowing web pages to request small bits of information
from the server instead of whole pages.
However, in this tutorial we will focus more on actual examples running on a PHP server, and less on
how AJAX works.
The XMLHttpRequest
It has been available ever since Internet Explorer 5.5 was released in July 2000, but not fully
discovered before people started to talk about AJAX and Web 2.0 in 2005.
Creating An XMLHttpRequest Object
Here is the simplest code you can use to overcome this problem:
var XMLHttp=null
if (window.XMLHttpRequest)
{
XMLHttp=new XMLHttpRequest()
}
else if (window.ActiveXObject)
{
XMLHttp=new ActiveXObject("Microsoft.XMLHTTP")
}
1. First create a variable XMLHttp to use as your XMLHttpRequest object. Set the value to
null.
2. Then test if the object window.XMLHttpRequest is available. This object is available in
newer versions of Firefox, Mozilla, Opera, and Safari.
3. If it's available, use it to create a new object: XMLHttp=new XMLHttpRequest()
4. If it's not available, test if an object window.ActiveXObject is available. This object is
available in Internet Explorer version 5.5 and later.
5. If it is available, use it to create a new object: XMLHttp=new ActiveXObject()
A Better Example?
Some programmers will prefer to use the newest and fastest version of the XMLHttpRequest object.
The example below tries to load Microsoft's latest version "Msxml2.XMLHTTP", available in Internet
Explorer 6, before it falls back to "Microsoft.XMLHTTP", available in Internet Explorer 5.5 and later.
function GetXmlHttpObject()
{
var xmlHttp=null;
try
{
// Firefox, Opera 8.0+, Safari
xmlHttp=new XMLHttpRequest();
}
catch (e)
{
// Internet Explorer
try
{
xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
}
catch (e)
{
xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
}
}
return xmlHttp;
}
1. First create a variable XMLHttp to use as your XMLHttpRequest object. Set the value to
null.
2. Try to create the object the according to web standards (Mozilla, Opera and
Safari):XMLHttp=new XMLHttpRequest()
3. Try to create the object the Microsoft way, available in Internet Explorer 6 and
later:XMLHttp=new ActiveXObject("Msxml2.XMLHTTP")
4. If this catches an error, try the older (Internet Explorer 5.5) way: XMLHttp=new
ActiveXObject("Microsoft.XMLHTTP")
In the AJAX example below we will demonstrate how a web page can communicate with a web
server online as a user enters data into a web form.
Suggestions:
This is the HTML page. It contains a simple HTML form and a link to a JavaScript:
<html>
<head>
<script src="clienthint.js"></script>
</head>
<body>
<form>
First Name:
<input type="text" id="txt1"
onkeyup="showHint(this.value)">
</form>
<p>Suggestions: <span id="txtHint"></span></p>
</body>
</html>
As you can see, the HTML page above contains a simple HTML form with an input field called "txt1".
1. An event is triggered when the user presses, and releases a key in the input field
2. When the event is triggered, a function called showHint() is executed.
3. Below the form is a <span> called "txtHint". This is used as a placeholder for the return
data of the showHint() function.
The JavaScript
The JavaScript code is stored in "clienthint.js" and linked to the HTML document:
var xmlHttp
function showHint(str)
{
if (str.length==0)
{
document.getElementById("txtHint").innerHTML=""
return
}
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="gethint.php"
url=url+"?q="+str
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
document.getElementById("txtHint").innerHTML=xmlHttp.responseText
}
}
function GetXmlHttpObject()
{
var xmlHttp=null;
try
{
// Firefox, Opera 8.0+, Safari
xmlHttp=new XMLHttpRequest();
}
catch (e)
{
// Internet Explorer
try
{
xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
}
catch (e)
{
xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
}
}
return xmlHttp;
}
Example Explained
This function executes every time a character is entered in the input field.
If there is some input in the text field (str.length > 0) the function executes the following:
If the input field is empty, the function simply clears the content of the txtHint placeholder.
This function executes every time the state of the XMLHTTP object changes.
When the state changes to 4 (or to "complete"), the content of the txtHint placeholder is filled with
the response text.
AJAX applications can only run in web browsers with complete XML support.
The purpose of the function is to solve the problem of creating different XMLHTTP objects for
different browsers.
The server page called by the JavaScript code is a simple PHP file called "gethint.php".
The code in the "gethint.php" checks an array of names and returns the corresponding names to the
client:
<?php
// Fill up array with names
$a[]="Anna";
$a[]="Brittany";
$a[]="Cinderella";
$a[]="Diana";
$a[]="Eva";
$a[]="Fiona";
$a[]="Gunda";
$a[]="Hege";
$a[]="Inga";
$a[]="Johanna";
$a[]="Kitty";
$a[]="Linda";
$a[]="Nina";
$a[]="Ophelia";
$a[]="Petunia";
$a[]="Amanda";
$a[]="Raquel";
$a[]="Cindy";
$a[]="Doris";
$a[]="Eve";
$a[]="Evita";
$a[]="Sunniva";
$a[]="Tove";
$a[]="Unni";
$a[]="Violet";
$a[]="Liza";
$a[]="Elizabeth";
$a[]="Ellen";
$a[]="Wenche";
$a[]="Vicky";
//get the q parameter from URL
$q=$_GET["q"];
//lookup all hints from array if length of q>0
if (strlen($q) > 0)
{
$hint="";
for($i=0; $i<count($a); $i++)
{
if (strtolower($q)==strtolower(substr($a[$i],0,strlen($q))))
{
if ($hint=="")
{
$hint=$a[$i];
}
else
{
$hint=$hint." , ".$a[$i];
}
}
}
}
If there is any text sent from the JavaScript (strlen($q) > 0) the following happens:
In the AJAX example below we will demonstrate how a web page can fetch information from an XML
file using AJAX technology.
The example above contains a simple HTML form and a link to a JavaScript:
<html>
<head>
<script src="selectcd.js"></script>
</head>
<body>
<form>
Select a CD:
<select name="cds" onchange="showCD(this.value)">
<option value="Bob Dylan">Bob Dylan</option>
<option value="Bee Gees">Bee Gees</option>
<option value="Cat Stevens">Cat Stevens</option>
</select>
</form>
<p>
<div id="txtHint"><b>CD info will be listed here.</b></div>
</p>
</body>
</html>
Example Explained
As you can see it is just a simple HTML form with a simple drop down box called "cds".
The paragraph below the form contains a div called "txtHint". The div is used as a placeholder for
info retrieved from the web server.
When the user selects data, a function called "showCD" is executed. The execution of the function is
triggered by the "onchange" event.
In other words: Each time the user changes the value in the drop down box, the function showCD is
called.
The JavaScript
var xmlHttp
function showCD(str)
{
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="getcd.php"
url=url+"?q="+str
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
document.getElementById("txtHint").innerHTML=xmlHttp.responseText
}
}
function GetXmlHttpObject()
{
var xmlHttp=null;
try
{
// Firefox, Opera 8.0+, Safari
xmlHttp=new XMLHttpRequest();
}
catch (e)
{
// Internet Explorer
try
{
xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
}
catch (e)
{
xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
}
}
return xmlHttp;
}
Example Explained
The stateChanged() and GetXmlHttpObject functions are the same as in the last chapter, you can go
to the previous page for an explanation of those
If an item in the drop down box is selected the function executes the following:
The server paged called by the JavaScript, is a simple PHP file called "getcd.php".
The code runs a query against the XML file and returns the result as HTML:
<?php
$q=$_GET["q"];
$xmlDoc = new DOMDocument();
$xmlDoc->load("cd_catalog.xml");
$x=$xmlDoc->getElementsByTagName('ARTIST');
for ($i=0; $i<=$x->length-1; $i++)
{
//Process only element nodes
if ($x->item($i)->nodeType==1)
{
if ($x->item($i)->childNodes->item(0)->nodeValue == $q)
{
$y=($x->item($i)->parentNode);
}
}
}
$cd=($y->childNodes);
for ($i=0;$i<$cd->length;$i++)
{
//Process only element nodes
if ($cd->item($i)->nodeType==1)
{
echo($cd->item($i)->nodeName);
echo(": ");
echo($cd->item($i)->childNodes->item(0)->nodeValue);
echo("<br />");
}
}
?>
Example Explained
When the query is sent from the JavaScript to the PHP page the following happens:
In the AJAX example below we will demonstrate how a web page can fetch information from a
MySQL database using AJAX technology.
• a MySQL database
• a simple HTML form
• a JavaScript
• a PHP page
The Database
The example above contains a simple HTML form and a link to a JavaScript:
<html>
<head>
<script src="selectuser.js"></script>
</head>
<body>
<form>
Select a User:
<select name="users" onchange="showUser(this.value)">
<option value="1">Peter Griffin</option>
<option value="2">Lois Griffin</option>
<option value="3">Glenn Quagmire</option>
<option value="4">Joseph Swanson</option>
</select>
</form>
<p>
<div id="txtHint"><b>User info will be listed here.</b></div>
</p>
</body>
</html>
As you can see it is just a simple HTML form with a drop down box called "users" with names and
the "id" from the database as option values.
The paragraph below the form contains a div called "txtHint". The div is used as a placeholder for
info retrieved from the web server.
When the user selects data, a function called "showUser()" is executed. The execution of the
function is triggered by the "onchange" event.
In other words: Each time the user changes the value in the drop down box, the function
showUser() is called.
The JavaScript
var xmlHttp
function showUser(str)
{
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="getuser.php"
url=url+"?q="+str
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
document.getElementById("txtHint").innerHTML=xmlHttp.responseText
}
}
function GetXmlHttpObject()
{
var xmlHttp=null;
try
{
// Firefox, Opera 8.0+, Safari
xmlHttp=new XMLHttpRequest();
}
catch (e)
{
//Internet Explorer
try
{
xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
}
catch (e)
{
xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
}
}
return xmlHttp;
}
Example Explained
The stateChanged() and GetXmlHttpObject functions are the same, you can go to there for an
explanation of those.
If an item in the drop down box is selected the function executes the following:
The server page called by the JavaScript, is a simple PHP file called "getuser.php".
The page is written in PHP and uses a MySQL databse.
The code runs a SQL query against a database and returns the result as an HTML table:
<?php
$q=$_GET["q"];
mysql_select_db("ajax_demo", $con);
$result = mysql_query($sql);
while($row = mysql_fetch_array($result))
{
echo "<tr>";
echo "<td>" . $row['FirstName'] . "</td>";
echo "<td>" . $row['LastName'] . "</td>";
echo "<td>" . $row['Age'] . "</td>";
echo "<td>" . $row['Hometown'] . "</td>";
echo "<td>" . $row['Job'] . "</td>";
echo "</tr>";
}
echo "</table>";
mysql_close($con);
?>
Example Explained
When the query is sent from the JavaScript to the PHP page the following happens:
This example my seem a lot like the "PHP AJAX Database" example in the last chapter, however
there is a big difference: in this example we get the data from the PHP page as XML using the
responseXML function.
Receiving the response as an XML document allows us to update this page several places, instead of
just receiving a PHP output and displaying it.
In this example we will update several <span> elements with the information we receive from the
database.
Lois Griffin
Piano Teacher
Age: 40
From: Newport
• a MySQL database
• a simple HTML form
• a JavaScript
• a PHP page
The Database
The example above contains a simple HTML form and a link to a JavaScript:
<html>
<head>
<script src="responsexml.js"></script>
</head>
<body>
<form>
Select a User:
<select name="users" onchange="showUser(this.value)">
<option value="1">Peter Griffin</option>
<option value="2">Lois Griffin</option>
<option value="3">Glenn Quagmire</option>
<option value="4">Joseph Swanson</option>
</select>
</form>
<h2><span id="firstname"></span>
<span id="lastname"></span></h2>
<span id="job"></span>
<div style="text-align: right">
<span id="age_text"></span>
<span id="age"></span>
<span id="hometown_text"></span>
<span id="hometown"></span>
</div>
</body>
</html>
• The HTML form is a drop down box called "users" with names and the "id" from the
database as option values.
• Below the form there are several different <span> elements which are used to as
placeholders for the different values we will retrive.
• When the user selects data, a function called "showUser()" is executed. The execution of
the function is triggered by the "onchange" event.
In other words: Each time the user changes the value in the drop down box, the function
showUser() is called and outputs the result in the specified <span> elements.
The JavaScript
var xmlHttp
function showUser(str)
{
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="responsexml.php"
url=url+"?q="+str
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
xmlDoc=xmlHttp.responseXML;
document.getElementById("firstname").innerHTML=
xmlDoc.getElementsByTagName("firstname")[0].childNodes[0].nodeValue;
document.getElementById("lastname").innerHTML=
xmlDoc.getElementsByTagName("lastname")[0].childNodes[0].nodeValue;
document.getElementById("job").innerHTML=
xmlDoc.getElementsByTagName("job")[0].childNodes[0].nodeValue;
document.getElementById("age_text").innerHTML="Age: ";
document.getElementById("age").innerHTML=
xmlDoc.getElementsByTagName("age")[0].childNodes[0].nodeValue;
document.getElementById("hometown_text").innerHTML="<br/>From: ";
document.getElementById("hometown").innerHTML=
xmlDoc.getElementsByTagName("hometown")[0].childNodes[0].nodeValue;
}
}
function GetXmlHttpObject()
{
var objXMLHttp=null
if (window.XMLHttpRequest)
{
objXMLHttp=new XMLHttpRequest()
}
else if (window.ActiveXObject)
{
objXMLHttp=new ActiveXObject("Microsoft.XMLHTTP")
}
return objXMLHttp
}
Example Explained
The showUser() and GetXmlHttpObject functions are the same, you can go to there for an
explanation of those.
If an item in the drop down box is selected the function executes the following:
1. Defines the "xmlDoc" variable as an xml document using the responseXML function
2. Retrieves data from the xml documents and places them in the correct <span> elements
The server page called by the JavaScript, is a simple PHP file called "responsexml.php".
The code runs a SQL query against a database and returns the result as an XML document:
<?php
header('Content-Type: text/xml');
header("Cache-Control: no-cache, must-revalidate");
//A date in the past
header("Expires: Mon, 26 Jul 1997 05:00:00 GMT");
$q=$_GET["q"];
$con = mysql_connect('localhost', 'peter', 'abc123');
if (!$con)
{
die('Could not connect: ' . mysql_error());
}
mysql_select_db("ajax_demo", $con);
$sql="SELECT * FROM user WHERE id = ".$q."";
$result = mysql_query($sql);
echo '<?xml version="1.0" encoding="ISO-8859-1"?>
<person>';
while($row = mysql_fetch_array($result))
{
echo "<firstname>" . $row['FirstName'] . "</firstname>";
echo "<lastname>" . $row['LastName'] . "</lastname>";
echo "<age>" . $row['Age'] . "</age>";
echo "<hometown>" . $row['Hometown'] . "</hometown>";
echo "<job>" . $row['Job'] . "</job>";
}
echo "</person>";
mysql_close($con);
?>
Example Explained
When the query is sent from the JavaScript to the PHP page the following happens:
AJAX can be used for a more user friendly and interactive search.
In the AJAX example below we will demonstrate a live search, where the server gets search results
while the user types.
This is the HTML page. It contains a simple HTML form, style for the form and a link to a JavaScript:
<html>
<head>
<script src="livesearch.js"></script>
<style type="text/css">
#livesearch
{
margin:0px;
width:194px;
}
#txt1
{
margin:0px;
}
</style>
</head>
<body>
<form>
<input type="text" id="txt1" size="30"
onkeyup="showResult(this.value)">
<div id="livesearch"></div>
</form>
</body>
</html>
As you can see, the HTML page above contains a simple HTML form with an input field called "txt1".
1. An event is triggered when the user presses, and releases a key in the input field
2. When the event is triggered, a function called showResult() is executed.
3. Below the form is a <div> called "livesearch". This is used as a placeholder for the return
data of the showResult() function.
The JavaScript
The JavaScript code is stored in "livesearch.js" and linked to the HTML document:
var xmlHttp
function showResult(str)
{
if (str.length==0)
{
document.getElementById("livesearch").
innerHTML="";
document.getElementById("livesearch").
style.border="0px";
return
}
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="livesearch.php"
url=url+"?q="+str
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
document.getElementById("livesearch").
innerHTML=xmlHttp.responseText;
document.getElementById("livesearch").
style.border="1px solid #A5ACB2";
}
}
function GetXmlHttpObject()
{
var xmlHttp=null;
try
{
// Firefox, Opera 8.0+, Safari
xmlHttp=new XMLHttpRequest();
}
catch (e)
{
// Internet Explorer
try
{
xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
}
catch (e)
{
xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
}
}
return xmlHttp;
}
Example Explained
This function executes every time a character is entered in the input field.
If there is no input in the text field (str.length == 0) the function sets the return field to empty and
removes any border around it.
However, if there is any input in the text field the function executes the following:
1. Defines the url (filename) to send to the server
2. Adds a parameter (q) to the url with the content of the input field
3. Adds a random number to prevent the server from using a cached file
4. Calls on the GetXmlHttpObject function to create an XMLHTTP object, and tells the object to
execute a function called stateChanged when a change is triggered
5. Opens the XMLHTTP object with the given url.
6. Sends an HTTP request to the server
This function executes every time the state of the XMLHTTP object changes.
When the state changes to 4 (or to "complete"), the content of the txtHint placeholder is filled with
the response text, and a border is set around the return field.
The server page called by the JavaScript code is a PHP file called "livesearch.php".
The code in the "livesearch.php" checks the XML document. The code searches the XML file for titles
matching the search string and returns the result as HTML:
<?php
$xmlDoc = new DOMDocument();
$xmlDoc->load("links.xml");
$x=$xmlDoc->getElementsByTagName('link');
//get the q parameter from URL
$q=$_GET["q"];
//lookup all links from the xml file if length of q>0
if (strlen($q) > 0)
{
$hint="";
for($i=0; $i<($x->length); $i++)
{
$y=$x->item($i)->getElementsByTagName('title');
$z=$x->item($i)->getElementsByTagName('url');
if ($y->item(0)->nodeType==1)
{
//find a link matching the search text
if (stristr($y->item(0)->childNodes->item(0)->nodeValue,$q))
{
if ($hint=="")
{
$hint="<a href='" .
$z->item(0)->childNodes->item(0)->nodeValue .
"' target='_blank'>" .
$y->item(0)->childNodes->item(0)->nodeValue . "</a>";
}
else
{
$hint=$hint . "<br /><a href='" .
$z->item(0)->childNodes->item(0)->nodeValue .
"' target='_blank'>" .
$y->item(0)->childNodes->item(0)->nodeValue . "</a>";
}
}
}
}
}
// Set output to "no suggestion" if no hint were found
// or to the correct values
if ($hint == "")
{
$response="no suggestion";
}
else
{
$response=$hint;
}
//output the response
echo $response;
?>
If there is any text sent from the JavaScript (strlen($q) > 0) the following happens:
In the AJAX example below we will demonstrate an RSS reader where the content from the RSS is
loaded into the webpage without refreshing.
This is the HTML page. It contains a simple HTML form and a link to a JavaScript:
<html>
<head>
<script type="text/javascript" src="getrss.js"></script>
</head>
<body>
<form>
Select an RSS-Feed:
<select onchange="showRSS(this.value)">
<option value="Google">Google News</option>
<option value="MSNBC">MSNBC News</option>
</select>
</form>
<p><div id="rssOutput">
<b>RSS Feed will be listed here.</b></div></p>
</body>
</html>
As you can see, the HTML page above contains a simple HTML form with a drop-down box.
1. An event is triggered when the user selects an option in the drop down box
2. When the event is triggered, a function called showRSS() is executed.
3. Below the form is a <div> called "rssOutput". This is used as a placeholder for the return
data of the showRSS() function.
The JavaScript
The JavaScript code is stored in "getrss.js" and linked to the HTML document:
var xmlHttp
function showRSS(str)
{
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="getrss.php"
url=url+"?q="+str
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
document.getElementById("rssOutput")
.innerHTML=xmlHttp.responseText
}
}
function GetXmlHttpObject()
{
var xmlHttp=null;
try
{
// Firefox, Opera 8.0+, Safari
xmlHttp=new XMLHttpRequest();
}
catch (e)
{
// Internet Explorer
try
{
xmlHttp=new ActiveXObject("Msxml2.XMLHTTP");
}
catch (e)
{
xmlHttp=new ActiveXObject("Microsoft.XMLHTTP");
}
}
return xmlHttp;
}
Example Explained
Every time an option is selected in the input field this function executes the following:
The server page called by the JavaScript code is a PHP file called "getrss.php":
<?php
//get the q parameter from URL
$q=$_GET["q"];
//find out which feed was selected
if($q=="Google")
{
$xml=("http://news.google.com/news?ned=us&topic=h&output=rss");
}
elseif($q=="MSNBC")
{
$xml=("http://rss.msnbc.msn.com/id/3032091/device/rss/rss.xml");
}
$xmlDoc = new DOMDocument();
$xmlDoc->load($xml);
//get elements from "<channel>"
$channel=$xmlDoc->getElementsByTagName('channel')->item(0);
$channel_title = $channel->getElementsByTagName('title')
->item(0)->childNodes->item(0)->nodeValue;
$channel_link = $channel->getElementsByTagName('link')
->item(0)->childNodes->item(0)->nodeValue;
$channel_desc = $channel->getElementsByTagName('description')
->item(0)->childNodes->item(0)->nodeValue;
//output elements from "<channel>"
echo("<p><a href='" . $channel_link
. "'>" . $channel_title . "</a>");
echo("<br />");
echo($channel_desc . "</p>");
//get and output "<item>" elements
$x=$xmlDoc->getElementsByTagName('item');
for ($i=0; $i<=2; $i++)
{
$item_title=$x->item($i)->getElementsByTagName('title')
->item(0)->childNodes->item(0)->nodeValue;
$item_link=$x->item($i)->getElementsByTagName('link')
->item(0)->childNodes->item(0)->nodeValue;
$item_desc=$x->item($i)->getElementsByTagName('description')
->item(0)->childNodes->item(0)->nodeValue;
echo ("<p><a href='" . $item_link
. "'>" . $item_title . "</a>");
echo ("<br />");
echo ($item_desc . "</p>");
}
?>
AJAX Suggest
In the AJAX example below we will demonstrate a poll where the web page can get the result
without reloading.
This is the HTML page. It contains a simple HTML form and a link to a JavaScript:
<html>
<head>
<script src="poll.js"></script>
</head>
<body>
<div id="poll">
<h2>Do you like PHP and AJAX so far?</h2>
<form>
Yes:
<input type="radio" name="vote"
value="0" onclick="getVote(this.value)">
<br />No:
<input type="radio" name="vote"
value="1" onclick="getVote(this.value)">
</form>
</div>
</body>
</html>
As you can see, the HTML page above contains a simple HTML form inside a "<div>" with two radio
buttons.
1. An event is triggered when the user selects the "yes" or "no" option
2. When the event is triggered, a function called getVote() is executed.
3. Around the form is a <div> called "poll". When the data is returned from the getVote()
function, the return data will replace the form.
The text file (poll_result.txt) is where we store the data from the poll.
0||0
The first number represents the "Yes" votes, the second number represents the "No" votes.
Note: Remember to allow your web server to edit the text file. Do NOT give everyone access, just
the web server (PHP).
The JavaScript
The JavaScript code is stored in "poll.js" and linked to in the HTML document:
var xmlHttp
function getVote(int)
{
xmlHttp=GetXmlHttpObject()
if (xmlHttp==null)
{
alert ("Browser does not support HTTP Request")
return
}
var url="poll_vote.php"
url=url+"?vote="+int
url=url+"&sid="+Math.random()
xmlHttp.onreadystatechange=stateChanged
xmlHttp.open("GET",url,true)
xmlHttp.send(null)
}
function stateChanged()
{
if (xmlHttp.readyState==4 || xmlHttp.readyState=="complete")
{
document.getElementById("poll").
innerHTML=xmlHttp.responseText;
}
}
function GetXmlHttpObject()
{
var objXMLHttp=null
if (window.XMLHttpRequest)
{
objXMLHttp=new XMLHttpRequest()
}
else if (window.ActiveXObject)
{
objXMLHttp=new ActiveXObject("Microsoft.XMLHTTP")
}
return objXMLHttp
}
Example Explained
This function executes when "yes" or "no" is selected in the HTML form.
The server page called by the JavaScript code is a simple PHP file called "poll_vote.php".
<?php
$vote = $_REQUEST['vote'];
//get content of textfile
$filename = "poll_result.txt";
$content = file($filename);
//put content in array
$array = explode("||", $content[0]);
$yes = $array[0];
$no = $array[1];
if ($vote == 0)
{
$yes = $yes + 1;
}
if ($vote == 1)
{
$no = $no + 1;
}
//insert votes to txt file
$insertvote = $yes."||".$no;
$fp = fopen($filename,"w");
fputs($fp,$insertvote);
fclose($fp);
?>
<h2>Result:</h2>
<table>
<tr>
<td>Yes:</td>
<td>
<img src="poll.gif"
width='<?php echo(100*round($yes/($no+$yes),2)); ?>'
height='20'>
<?php echo(100*round($yes/($no+$yes),2)); ?>%
</td>
</tr>
<tr>
<td>No:</td>
<td>
<img src="poll.gif"
width='<?php echo(100*round($no/($no+$yes),2)); ?>'
height='20'>
<?php echo(100*round($no/($no+$yes),2)); ?>%
</td>
</tr>
</table>
The selected value is sent from the JavaScript and the following happens:
PHP supports both simple and multi-dimensional arrays. There are also specific functions for
populating arrays from database queries.
Installation
The array functions are part of the PHP core. There is no installation needed to use these functions.
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
The calendar functions are useful when working with different calendar formats. The standard it is
based on is the Julian day count (Julian day count is a count of days starting from January 1, 4713
B.C.). Note that the Julian day count is not the same as the Julian calendar!
Note: To convert between calendar formats, you must first convert to Julian day count, then to the
calendar format.
Installation
The windows version of PHP has built-in support for the calendar extension. So, the calendar
functions will work automatically.
However, if you are running the Linux version of PHP, you will have to compile PHP with --enable-
calendar to get the calendar functions to work.
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
The date/time functions allow you to extract and format the date and time on the server.
Installation
The date/time functions are part of the PHP core. There is no installation needed to use these
functions.
Runtime Configuration
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
The directory functions allow you to retrieve information about directories and their contents.
Installation
The directory functions are part of the PHP core. There is no installation needed to use these
functions.
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
The error and logging functions allows error handling and logging.
The error functions allow users to define error handling rules, and modify the way the errors can be
logged.
The logging functions allow users to log applications and send log messages to email, system logs
or other machines.
Installation
The error and logging functions are part of the PHP core. There is no installation needed to use
these functions.
PHP: indicates the earliest version of PHP that supports the function.
The filesystem functions allow you to access and manipulate the filesystem.
Installation
The filesystem functions are part of the PHP core. There is no installation needed to use these
functions.
Runtime Configuration
When specifying a path on Unix platforms, the forward slash (/) is used as directory separator.
However, on Windows platforms, both forward slash (/) and backslash (\) can be used.
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
This PHP filters is used to validate and filter data coming from insecure sources, like user input.
Installation
The filter functions are part of the PHP core. There is no installation needed to use these functions.
PHP: indicates the earliest version of PHP that supports the function.
PHP Filters
ID Name Description
FILTER_CALLBACK Call a user-defined function to filter data
FILTER_SANITIZE_STRING Strip tags, optionally strip or encode special
characters
FILTER_SANITIZE_STRIPPED Alias of "string" filter
FILTER_SANITIZE_ENCODED URL-encode string, optionally strip or encode
special characters
FILTER_SANITIZE_SPECIAL_CHARS HTML-escape '"<>& and characters with ASCII
value less than 32
FILTER_SANITIZE_EMAIL Remove all characters, except letters, digits and !
#$%&'*+-/=?^_`{|}~@.[]
FILTER_SANITIZE_URL Remove all characters, except letters, digits and
$-_.+!*'(),{}|\\^~[]`<>#%";/?:@&=
FILTER_SANITIZE_NUMBER_INT Remove all characters, except digits and +-
FILTER_SANITIZE_NUMBER_FLOAT Remove all characters, except digits, +- and
optionally .,eE
FILTER_SANITIZE_MAGIC_QUOTES Apply addslashes()
FILTER_UNSAFE_RAW Do nothing, optionally strip or encode special
characters
FILTER_VALIDATE_INT Validate value as integer, optionally from the
specified range
FILTER_VALIDATE_BOOLEAN Return TRUE for "1", "true", "on" and "yes", FALSE
for "0", "false", "off", "no", and "", NULL otherwise
FILTER_VALIDATE_FLOAT Validate value as float
FILTER_VALIDATE_REGEXP Validate value against regexp, a Perl-compatible
regular expression
FILTER_VALIDATE_URL Validate value as URL, optionally with required
components
FILTER_VALIDATE_EMAIL Validate value as e-mail
FILTER_VALIDATE_IP Validate value as IP address, optionally only IPv4
or IPv6 or not from private or reserved ranges
The FTP functions give client access to file servers through the File Transfer Protocol (FTP).
The FTP functions are used to open, login and close connections, as well as upload, download,
rename, delete, and get information on files from file servers. Not all of the FTP functions will work
with every server or return the same results. The FTP functions became available with PHP 3.
These functions are meant for detailed access to an FTP server. If you only wish to read from or
write to a file on an FTP server, consider using the ftp:// wrapper with the Filesystem functions.
Installation
The windows version of PHP has built-in support for the FTP extension. So, the FTP functions will
work automatically.
However, if you are running the Linux version of PHP, you will have to compile PHP with --enable-ftp
(PHP 4+) or --with-ftp (PHP 3) to get the FTP functions to work.
PHP: indicates the earliest version of PHP that supports the constant.
The HTTP functions let you manipulate information sent to the browser by the Web server, before
any other output has been sent.
Installation
The directory functions are part of the PHP core. There is no installation needed to use these
functions.
PHP: indicates the earliest version of PHP that supports the function.
None.
The libxml functions and constants are used together with SimpleXML, XSLT and DOM functions.
Installation
PHP: indicates the earliest version of PHP that supports the function.
The mail() function allows you to send emails directly from a script.
Requirements
For the mail functions to be available, PHP requires an installed and working email system. The
program to be used is defined by the configuration settings in the php.ini file.
Installation
The mail functions are part of the PHP core. There is no installation needed to use these functions.
Runtime Configuration
The behavior of the mail functions is affected by settings in the php.ini file.
PHP: indicates the earliest version of PHP that supports the function.
None.
The math functions can handle values within the range of integer and float types.
Installation
The math functions are part of the PHP core. There is no installation needed to use these functions.
PHP: indicates the earliest version of PHP that supports the function.
The misc. functions were only placed here because none of the other categories seemed to fit.
Installation
The misc functions are part of the PHP core. There is no installation needed to use these functions.
Runtime Configuration
The behavior of the misc functions is affected by settings in the php.ini file.
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
Installation
For the MySQL functions to be available, you must compile PHP with MySQL support.
For compiling, use --with-mysql=DIR (the optional DIR points to the MySQL directory).
Note: For full functionality of MySQL versions greater than 4.1., use the MySQLi extension instead.
If you would like to install both the mysql extension and the mysqli extension you should use the
same client library to avoid any conflicts.
PHP 5+: MySQL and the MySQL library is not enabled by default. Use the --with-mysql=DIR
configure option to include MySQL support and download headers and libraries from
www.mysql.com.
PHP 5+: MySQL is not enabled by default, so the php_mysql.dll must be enabled inside of php.ini.
Also, PHP needs access to the MySQL client library. A file named libmysql.dll is included in the
Windows PHP distribution, and in order for PHP to talk to MySQL this file needs to be available to the
Windows systems PATH.
To enable any PHP extension, the PHP extension_dir setting (in the php.ini file) should be set to the
directory where the PHP extensions are located. An example extension_dir value is c:\php\ext.
Note: If you get the following error when starting the web server: "Unable to load dynamic library
'./php_mysql.dll'", this is because php_mysql.dll or libmysql.dll cannot be found by the system.
Runtime Configuration
The behavior of the MySQL functions is affected by settings in the php.ini file.
There are two resource types used in the MySQL extension. The first one is the link_identifier for a
database connection, the second is a resource which holds the result of a query.
Note: Most MySQL functions accept link_identifier as the last optional parameter. If it is not
provided, the last opened connection is used.
PHP: indicates the earliest version of PHP that supports the function.
Since PHP 4.3 it has been possible to specify additional flags for the mysql_connect() and
mysql_pconnect() functions:
PHP: indicates the earliest version of PHP that supports the constant.
The mysql_fetch_array() function uses a constant for the different types of result arrays. The
following constants are defined:
This object can be processed, like any other object, with normal property selectors and array
iterators.
Installation
The SimpleXML functions are part of the PHP core. There is no installation needed to use these
functions.
PHP: indicates the earliest version of PHP that supports the function.
Installation
The string functions are part of the PHP core. There is no installation needed to use these functions.
PHP String Functions
PHP: indicates the earliest version of PHP that supports the function.
PHP: indicates the earliest version of PHP that supports the constant.
The XML functions lets you parse, but not validate, XML documents.
XML is a data format for standardized structured document exchange. This extension uses the Expat
XML parser.
Expat is an event-based parser, it views an XML document as a series of events. When an event
occurs, it calls a specified function to handle it.
Expat is a non-validating parser, and ignores any DTDs linked to a document. However, if the
document is not well formed it will end with an error message.
Because it is an event-based, non validating parser, Expat is fast and well suited for web
applications.
The XML parser functions lets you create XML parsers and define handlers for XML events.
Installation
The XML functions are part of the PHP core. There is no installation needed to use these functions.
PHP: indicates the earliest version of PHP that supports the function.
For the Zip file functions to work on your server, these libraries must be installed:
PHP 5+: Zip functions and the Zip library is not enabled by default and must be downloaded from
the links above. Use the --with-zip=DIR configure option to include Zip support.
PHP 5+: Zip functions is not enabled by default, so the php_zip.dll and the ZZIPlib library must be
downloaded from the link above. php_zip.dll must be enabled inside of php.ini.
To enable any PHP extension, the PHP extension_dir setting (in the php.ini file) should be set to the
directory where the PHP extensions are located. An example extension_dir value is c:\php\ext.
PHP: indicates the earliest version of PHP that supports the function.
NONE
Browsers
IE Internet Explorer
Fx Firefox (identified as Mozilla before 2005)
Moz The Mozilla Suite (Gecko, Netscape)
S Safari (and Konqueror. Both identified as Mozilla before 2007)
O Opera
N Netscape (identified as Mozilla after 2006)
AOL America Online (based on both Internet Explorer and Mozilla)
<&>...</&>
<?php>...</?>
<script>...</script>
<?php…?>
"Hello World";
Document.Write("Hello World");
echo "Hello World";
!
$
&
New line
.
;
</php>
Perl and C
JavaScript
VBScript
7. How do you get information from a form that is submitted using the "get" method?
Request.QueryString;
$_GET[];
Request.Form;
8. When using the POST method, variables are displayed in the URL:
True
False
9. In PHP you can use both single quotes ( ' ' ) and double quotes ( " " ) for strings:
True
False
True
False
create myFunction()
new_function myFunction()
function myFunction()
13. What is the correct way to open the file "time.txt" as readable?
fopen("time.txt","r+");
open("time.txt","read");
open("time.txt");
fopen("time.txt","r");
True
False
connect_mysql("localhost");
dbopen("localhost");
mysql_connect("localhost");
mysql_open("localhost");
count++;
$count =+1
++count
$count++;
<!--…-->
<comment>…</comment>
/*…*/
*\..\*
True
False
True
False
$my-Var
$myVar
$my_Var