Está en la página 1de 812

DRIVER INFORMATION & MULTIMEDIA

SECTION

AUDIO, VISUAL & NAVIGATION SYSTEM

AV

CONTENTS
BASE AUDIO BASIC INSPECTION .................................. 11 .
DIAGNOSIS AND REPAIR WORKFLOW ........11 .
Work Flow .............................................................. 11 . Reference Values ...................................................26 . Wiring Diagram BASE AUDIO .......................28 .

SYMPTOM DIAGNOSIS ............................. 35 .


AUDIO SYSTEM SYMPTOMS .......................... 35
Symptom Table ......................................................35 .

SYSTEM DESCRIPTION ............................ 13 .


AUDIO SYSTEM ................................................13 .
System Diagram ..................................................... 13 . System Description ................................................ 13 . Component Parts Location ..................................... 14 . Component Description .......................................... 14 .

NORMAL OPERATING CONDITION ............... 36


Description ..............................................................36 .

PRECAUTION ............................................. 37 .
PRECAUTIONS ................................................. 37
FOR USA AND CANADA .........................................37 . FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" ...........................37 . FOR USA AND CANADA : Precaution for Trouble Diagnosis ................................................................37 . FOR USA AND CANADA : Precaution for Harness Repair .....................................................................37 . FOR MEXICO ............................................................38 . FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" .................................................38 . FOR MEXICO : Precaution for Trouble Diagnosis 38 .... FOR MEXICO : Precaution for Harness Repair .....38 .

DIAGNOSIS SYSTEM (AUDIO UNIT) ...............15 .


Diagnosis Description ............................................ 15 .

DTC/CIRCUIT DIAGNOSIS ........................ 19 .


POWER SUPPLY AND GROUND CIRCUIT .....19 .
AUDIO UNIT ............................................................. 19 . AUDIO UNIT : Diagnosis Procedure ...................... 19 .

STEERING SWITCH SIGNAL A CIRCUIT ........20 .


Description ............................................................. 20 . Diagnosis Procedure .............................................. 20 . Component Inspection ........................................... 21 .

AV

STEERING SWITCH SIGNAL B CIRCUIT ........22 .


Description ............................................................. 22 . Diagnosis Procedure .............................................. 22 . Component Inspection ........................................... 23 .

PREPARATION .......................................... 40 .
PREPARATION ................................................. 40
Commercial Service Tools ......................................40 .

STEERING SWITCH SIGNAL GND CIRCUIT....24


Description ............................................................. 24 . Diagnosis Procedure .............................................. 24 . Component Inspection ........................................... 25 .

REMOVAL AND INSTALLATION .............. 41 .


AUDIO UNIT ...................................................... 41
Exploded View ........................................................41 . Removal and Installation ........................................41 .

ECU DIAGNOSIS INFORMATION ............. 26 .


AUDIO UNIT ......................................................26 .
Revision: 2009 September

AUDIO DISPLAY ............................................... 42


2010 Murano

AV-1

Exploded View ....................................................... 42 . Removal and Installation ....................................... 42 .

FRONT DOOR SPEAKER ................................ 43 .


Exploded View ....................................................... 43 . Removal and Installation ....................................... 43 .

System Description ................................................ 55 . Component Parts Location .................................... 57 . Component Description ......................................... 58 .

REAR VIEW MONITOR SYSTEM .................... 61 .


System Diagram .................................................... 61 . System Description ................................................ 61 . Component Parts Location .................................... 62 . Component Description ......................................... 63 .

REAR DOOR SPEAKER .................................. 44 .


Exploded View ....................................................... 44 . Removal and Installation ....................................... 44 .

FRONT SQUAWKER ........................................ 45 .


Exploded View ....................................................... 45 . Removal and Installation ....................................... 45 .

AUDIO SYSTEM ............................................... 64 .


System Diagram .................................................... 64 . System Description ................................................ 64 . Component Parts Location .................................... 66 . Component Description ......................................... 67 .

STEERING SWITCH ......................................... 46 .


Exploded View ....................................................... 46 . Removal and Installation ....................................... 46 .

DVD ENTERTAINMENT SYSTEM ................... 68 .


System Diagram .................................................... 68 . System Description ................................................ 68 . Component Parts Location .................................... 69 . Component Description ......................................... 70 .

ROOF ANTENNA ............................................. 47 .


Exploded View ....................................................... 47 . Removal and Installation ....................................... 47 .

ANTENNA FEEDER (RADIO) .......................... 48 .


Harness Layout ..................................................... 48 .

HANDS-FREE PHONE SYSTEM ..................... 71 .


System Diagram .................................................... 71 . System Description ................................................ 71 . Component Parts Location .................................... 72 . Component Description ......................................... 73 .

BOSE AUDIO WITHOUT NAVIGATION BASIC INSPECTION .................................. 49 .


DIAGNOSIS AND REPAIR WORK FLOW ....... 49 .
Work Flow .............................................................. 49 .

DIAGNOSIS SYSTEM (AV CONTROL UNIT) ... 74


Diagnosis Description ............................................ 74 . CONSULT-III Function (MULTI AV) ....................... 87 .

INSPECTION AND ADJUSTMENT .................. 51 .


ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL ................................. 51 . ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description ... 51 ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement ................................................... 51 . ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ....................................................... 51 . ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description ............................... 51 . ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement .... 51 . REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT ....................... 51 . REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Description ... 51 REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement ................................................... 51 .

DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)... 91


Diagnosis Description ............................................ 91 .

DTC/CIRCUIT DIAGNOSIS ........................ 93


U1000 CAN COMM CIRCUIT ........................... 93 .
Description ............................................................. 93 . DTC Logic .............................................................. 93 . Diagnosis Procedure ............................................. 93 .

U1010 CONTROL UNIT (CAN) ........................ 94 .


Description ............................................................. 94 . DTC Logic .............................................................. 94 . Diagnosis Procedure .............................................. 94 .

U1310 AV CONTROL UNIT ............................. 95 .


Description ............................................................. 95 . DTC Logic .............................................................. 95 .

U1200 AV CONTROL UNIT ............................. 96 .


Description ............................................................. 96 . DTC Logic .............................................................. 96 .

U1216 AV CONTROL UNIT ............................. 97 .


Description ............................................................. 97 . DTC Logic .............................................................. 97 .

SYSTEM DESCRIPTION ........................... 52 .


MULTI AV SYSTEM .......................................... 52 .
System Diagram .................................................... 52 .

U1243 DISPLAY UNIT ...................................... 98 .


Description ............................................................. 98 . DTC Logic .............................................................. 98 .

Revision: 2009 September

AV-2

2010 Murano

Diagnosis Procedure .............................................. 98 .

U1247 REAR DISP CONN .............................. 100 .


Description ........................................................... 100 . DTC Logic ............................................................ 100 . Diagnosis Procedure ............................................ 100 .

Description ............................................................ 116 . Diagnosis Procedure ............................................ 116 .

RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) ....... 117
Description ............................................................ 117 . Diagnosis Procedure ............................................ 117 .

U1250 CAMERA CONTROL UNIT ................. 102 .


Description ........................................................... 102 . DTC Logic ............................................................ 102 . Diagnosis Procedure ............................................ 102 .

RGB SYNCHRONIZING SIGNAL CIRCUIT ... 118


Description ............................................................ 118 . Diagnosis Procedure ............................................ 118 .

U1255 SATELLITE RADIO TUNER ................ 103 .


Description ........................................................... 103 . DTC Logic ............................................................ 103 . Diagnosis Procedure ............................................ 103 .

RGB AREA (YS) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) ....... 119
Description ............................................................ 119 . Diagnosis Procedure ............................................ 119 .

U1300 AV COMM CIRCUIT ............................ 105 .


Description ........................................................... 105 .

HP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT) ....................... 120


Description ............................................................ 120 . Diagnosis Procedure ............................................ 120 .

POWER SUPPLY AND GROUND CIRCUIT ... 107 .


AV CONTROL UNIT ............................................... 107 . AV CONTROL UNIT : Diagnosis Procedure ........ 107 . FRONT DISPLAY UNIT .......................................... 107 . FRONT DISPLAY UNIT : Diagnosis Procedure ... 107 . REAR DISPLAY UNIT ............................................ 108 . REAR DISPLAY UNIT : Diagnosis Procedure ..... 108 . VIDEO DISTRIBUTOR ........................................... 109 . VIDEO DISTRIBUTOR : Diagnosis Procedure .... 109 . DVD PLAYER ......................................................... 110 . DVD PLAYER : Diagnosis Procedure .................. 110 . MULTIFUNCTION SWITCH .................................... 110 . MULTIFUNCTION SWITCH : Diagnosis Procedure ...................................................................... 110 . BOSE AMP. ............................................................ 111 . BOSE AMP. : Diagnosis Procedure ..................... 111 . WOOFER ................................................................ 112 . WOOFER : Diagnosis Procedure ......................... 112 . IPOD ADAPTER ..................................................... 112 . iPod ADAPTER : Diagnosis Procedure ................ 112 . SATELLITE RADIO TUNER ................................... 113 . SATELLITE RADIO TUNER : Diagnosis Procedure ...................................................................... 113 . TEL ADAPTER UNIT .............................................. 113 . TEL ADAPTER UNIT : Diagnosis Procedure ....... 113 .

VP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT) ....................... 121


Description ............................................................ 121 . Diagnosis Procedure ............................................ 121 .

COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT). 122
Description ............................................................ 122 . Diagnosis Procedure ............................................ 122 .

COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO AV CONTROL UNIT) . 123


Description ............................................................ 123 . Diagnosis Procedure ............................................ 123 .

COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT) . 124
Description ............................................................ 124 . Diagnosis Procedure ............................................ 124 .

RGB (R: RED) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT) .......... 125
Description ............................................................ 125 . Diagnosis Procedure ............................................ 125 .

AV

RGB (G: GREEN) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT) .... 126
Description ............................................................ 126 . Diagnosis Procedure ............................................ 126 .

RGB (R: RED) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) ....... 115 .
Description ........................................................... 115 . Diagnosis Procedure ............................................ 115 .

RGB (B: BLUE) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT) .... 127
Description ............................................................ 127 . Diagnosis Procedure ............................................ 127 .

RGB (G: GREEN) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) 116 ..
Revision: 2009 September

COMPOSITE SYNCHRONIZING SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT) ............................................... 128
2010 Murano

AV-3

Description ............................................................128 . Diagnosis Procedure ............................................128 .

Diagnosis Procedure ............................................ 142 .

RGB AREA (YS) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT) ... 129 .
Description ............................................................129 . Diagnosis Procedure ............................................129 .

STEERING ANGLE SENSOR SIGNAL CIRCUIT ................................................................. 143 .


Description ........................................................... 143 . Diagnosis Procedure ............................................ 143 .

STEERING SWITCH SIGNAL A CIRCUIT ...... 145 .


Description ........................................................... 145 . Diagnosis Procedure ............................................ 145 . Component Inspection ......................................... 146 .

VP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR) ............................ 130 .


Description ............................................................130 . Diagnosis Procedure ............................................130 .

STEERING SWITCH SIGNAL B CIRCUIT ...... 147 .


Description ........................................................... 147 . Diagnosis Procedure ............................................ 147 . Component Inspection ......................................... 148 .

HP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR) ............................ 131 .


Description ............................................................131 . Diagnosis Procedure ............................................131 .

STEERING SWITCH SIGNAL GND CIRCUIT.. 149


Description ........................................................... 149 . Diagnosis Procedure ............................................ 149 . Component Inspection ......................................... 150 .

AUX IMAGE SIGNAL CIRCUIT ...................... 132 .


WITHOUT DVD ENTERTAINMENT SYSTEM ........132 . WITHOUT DVD ENTERTAINMENT SYSTEM : Description ............................................................132 . WITHOUT DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure ............................................132 . WITH DVD ENTERTAINMENT SYSTEM ...............133 . WITH DVD ENTERTAINMENT SYSTEM : Description ................................................................133 . WITH DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure ....................................................133 .

ECU DIAGNOSIS INFORMATION ............ 151


AV CONTROL UNIT ........................................ 151 .
Reference Values ................................................ 151 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 158 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 176 . DTC Index ............................................................ 197 .

DVD IMAGE SIGNAL CIRCUIT ...................... 135 .


Description ............................................................135 . Diagnosis Procedure ............................................135 .

FRONT DISPLAY UNIT ................................... 199 .


Reference Values ................................................ 199 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 201 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 219 .

DISK EJECT SIGNAL CIRCUIT ..................... 136 .


Description ............................................................136 . Diagnosis Procedure ............................................136 .

MICROPHONE SIGNAL CIRCUIT ................. 137 .


Description ............................................................137 . Diagnosis Procedure ............................................137 .

CONTROL SIGNAL CIRCUIT ........................ 139 .


Description ............................................................139 . Diagnosis Procedure ............................................139 .

BOSE AMP. ..................................................... 241 .


Reference Values ................................................ 241 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 243 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 261 .

CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT) ............................................................... 140 .
Description ............................................................140 . Diagnosis Procedure ............................................140 .

REAR DISPLAY UNIT ..................................... 283 .


Reference Values ................................................ 283 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 285 .

CAMERA ON SIGNAL CIRCUIT .................... 141 .


Description ............................................................141 . Diagnosis Procedure ............................................141 .

CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO AV CONTROL UNIT) ............................................................... 142 .
Description ............................................................142 .

VIDEO DISTRIBUTOR .................................... 307 .


Reference Values ................................................ 307 .

Revision: 2009 September

AV-4

2010 Murano

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 310 .

DVD PLAYER .................................................. 332 .


Reference Values ................................................. 332 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 333 .

FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" ......................... 530 . FOR USA AND CANADA : Precaution for Trouble Diagnosis .............................................................. 530 . FOR USA AND CANADA : Precaution for Harness Repair ................................................................... 530 . FOR MEXICO .......................................................... 531 . FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" ............................................... 531 . FOR MEXICO : Precaution for Trouble Diagnosis 531 .. FOR MEXICO : Precaution for Harness Repair ... 531 .

SATELLITE RADIO TUNER ........................... 355 .


Reference Values ................................................. 355 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 356 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 374 .

PREPARATION ........................................ 533 .


PREPARATION ............................................... 533
Commercial Service Tools .................................... 533 .

iPod ADAPTER ............................................... 396 .


Reference Values ................................................. 396 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 397 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 415 .

REMOVAL AND INSTALLATION ............ 534 .


AV CONTROL UNIT ........................................ 534
Exploded View ...................................................... 534 . Removal and Installation ...................................... 534 . G

FRONT DISPLAY UNIT .................................. 535


Exploded View ...................................................... 535 . Removal and Installation ...................................... 535 .

TEL ADAPTER UNIT ...................................... 437 .


Reference Values ................................................. 437 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 438 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 456 .

REAR DISPLAY UNIT ..................................... 536


Exploded View ...................................................... 536 . Removal and Installation ...................................... 536 .

VIDEO DISTRIBUTOR .................................... 537


Exploded View ...................................................... 537 . Removal and Installation ...................................... 537 . K

CAMERA CONTROL UNIT ............................. 478 .


Reference Values ................................................. 478 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM - ............................................................ 480 . Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM - ................................................................... 498 .

DVD PLAYER .................................................. 538


Exploded View ...................................................... 538 . Removal and Installation ...................................... 538 . L

FRONT DOOR SPEAKER .............................. 539


Exploded View ...................................................... 539 . Removal and Installation ...................................... 539 . M

REAR DOOR SPEAKER ................................ 540


Exploded View ...................................................... 540 . Removal and Installation ...................................... 540 .

SYMPTOM DIAGNOSIS ........................... 520 .


MULTI AV SYSTEM SYMPTOMS ................... 520 .
Symptom Table .................................................... 520 .

AV

FRONT SQUAWKER ...................................... 541


Exploded View ...................................................... 541 . Removal and Installation ...................................... 541 .

NORMAL OPERATING CONDITION .............. 528 .


Description ........................................................... 528 .

REAR SPEAKER ............................................ 542


Exploded View ...................................................... 542 . Removal and Installation ...................................... 542 .

PRECAUTION ........................................... 530 .


PRECAUTIONS ............................................... 530 .
FOR USA AND CANADA ....................................... 530 .

CENTER SPEAKER ........................................ 543


Exploded View ...................................................... 543 . Removal and Installation ...................................... 543 .

Revision: 2009 September

AV-5

2010 Murano

WOOFER ........................................................ 544 .


Exploded View ......................................................544 . Removal and Installation ......................................544 .

ANTENNA FEEDER (RADIO) ......................... 560 .


Harness Layout .................................................... 560 .

ANTENNA FEEDER (SATELLITE RADIO) .... 561 .


Harness Layout .................................................... 561 .

BOSE AMP. .................................................... 545 .


Exploded View ......................................................545 . Removal and Installation ......................................545 .

ANTENNA FEEDER (TEL) .............................. 562 .


Harness Layout .................................................... 562 .

MULTIFUNCTION SWITCH ............................ 546 .


Exploded View ......................................................546 . Removal and Installation ......................................546 .

BOSE AUDIO WITH NAVIGATION BASIC INSPECTION ................................. 563


DIAGNOSIS AND REPAIR WORK FLOW ...... 563 .
Work Flow ............................................................ 563 .

PRESET SWITCH ........................................... 547 .


Exploded View ......................................................547 . Removal and Installation ......................................547 .

INSPECTION AND ADJUSTMENT ................. 565 .


ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL ............................... 565 . ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description . 565 ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement ................................................. 565 . ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ..................................................... 565 . ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description ............................. 565 . ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement .. 565 . REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT ..................... 565 . REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Description . 565 REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement ................................................. 565 .

STEERING SWITCH ....................................... 548 .


Exploded View ......................................................548 . Removal and Installation ......................................548 .

iPod ADAPTER .............................................. 549 .


Exploded View ......................................................549 . Removal and Installation ......................................549 .

iPod CONNECTOR ........................................ 550 .


Exploded View ......................................................550 . Removal and Installation ......................................550 .

AUXILIARY INPUT JACKS ............................ 551 .


Exploded View ......................................................551 . Removal and Installation ......................................551 .

MICROPHONE ................................................ 552 .


Exploded View ......................................................552 . Removal and Installation ......................................552 .

CAMERA CONTROL UNIT ............................ 553 .


Exploded View ......................................................553 . Removal and Installation ......................................553 . Adjustment ............................................................553 .

REAR VIEW CAMERA ................................... 554 .


Exploded View ......................................................554 . Removal and Installation ......................................554 . Adjustment ............................................................554 .

SYSTEM DESCRIPTION .......................... 566


MULTI AV SYSTEM ........................................ 566 .
System Diagram .................................................. 566 . System Description .............................................. 567 . Component Parts Location .................................. 569 . Component Description ....................................... 570 .

STEERING ANGLE SENSOR ........................ 556 .


Exploded View ......................................................556 . Removal and Installation ......................................556 .

ROOF ANTENNA ........................................... 557 .


Exploded View ......................................................557 . Removal and Installation ......................................557 .

NAVIGATION SYSTEM ................................... 572 .


System Diagram .................................................. 572 . System Description .............................................. 572 . Component Parts Location .................................. 575 . Component Description ....................................... 576 .

SATELLITE RADIO TUNER ........................... 558 .


Exploded View ......................................................558 . Removal and Installation ......................................558 .

REAR VIEW MONITOR SYSTEM ................... 577 .


System Diagram .................................................. 577 . System Description .............................................. 577 . Component Parts Location .................................. 578 . Component Description ....................................... 579 .

TEL ADAPTER UNIT ...................................... 559 .


Exploded View ......................................................559 . Removal and Installation ......................................559 .

AUDIO SYSTEM .............................................. 580 .


Revision: 2009 September

AV-6

2010 Murano

System Diagram ................................................... 580 . System Description .............................................. 580 . Component Parts Location ................................... 582 . Component Description ........................................ 583 .

U121B AV CONTROL UNIT ........................... 616


Description ............................................................ 616 . DTC Logic ............................................................. 616 . A

U121C AV CONTROL UNIT ........................... 617


Description ............................................................ 617 . DTC Logic ............................................................. 617 .

HANDS-FREE PHONE SYSTEM .................... 584 .


System Diagram ................................................... 584 . System Description .............................................. 584 . Component Parts Location ................................... 585 . Component Description ........................................ 586 .

U121D AV CONTROL UNIT ........................... 618


Description ............................................................ 618 . DTC Logic ............................................................. 618 .

DIAGNOSIS SYSTEM (AV CONTROL UNIT).. 587


Diagnosis Description .......................................... 587 . CONSULT-III Function (MULTI AV) ..................... 601 .

U121E AV CONTROL UNIT ............................ 619


Description ............................................................ 619 . DTC Logic ............................................................. 619 .

DTC/CIRCUIT DIAGNOSIS ...................... 605 .


U1000 CAN COMM CIRCUIT .......................... 605 .
Description ........................................................... 605 . DTC Logic ............................................................ 605 . Diagnosis Procedure ........................................... 605 .

U121F AV CONTROL UNIT ............................ 620


Description ............................................................ 620 . DTC Logic ............................................................. 620 . Diagnosis Procedure ............................................ 620 .

U1204 GPS ...................................................... 621


Description ............................................................ 621 . DTC Logic ............................................................. 621 . Diagnosis Procedure ............................................ 621 . G

U1010 CONTROL UNIT (CAN) ....................... 606 .


Description ........................................................... 606 . DTC Logic ............................................................ 606 . Diagnosis Procedure ............................................ 606 .

U1205 GPS ...................................................... 622


Description ............................................................ 622 . DTC Logic ............................................................. 622 . Diagnosis Procedure ............................................ 622 .

U1310 AV CONTROL UNIT ............................ 607 .


Description ........................................................... 607 . DTC Logic ............................................................ 607 .

U1200 AV CONTROL UNIT ............................ 608 .


Description ........................................................... 608 . DTC Logic ............................................................ 608 .

U1206 GPS ...................................................... 623


Description ............................................................ 623 . DTC Logic ............................................................. 623 . Diagnosis Procedure ............................................ 623 . J

U1201 AV CONTROL UNIT ............................ 609 .


Description ........................................................... 609 . DTC Logic ............................................................ 609 .

U1207 GPS ...................................................... 624


Description ............................................................ 624 . DTC Logic ............................................................. 624 . Diagnosis Procedure ............................................ 624 .

U1216 AV CONTROL UNIT ............................ 610 .


Description ........................................................... 610 . DTC Logic ............................................................ 610 .

U1243 DISPLAY UNIT .................................... 625


Description ............................................................ 625 . DTC Logic ............................................................. 625 . Diagnosis Procedure ............................................ 625 . M

U1217 AV CONTROL UNIT ............................ 611 .


Description ........................................................... 611 . DTC Logic ............................................................ 611 .

U1218 AV CONTROL UNIT ............................ 612 .


Description ........................................................... 612 . DTC Logic ............................................................ 612 .

U1244 GPS ANTENNA ................................... 627


Description ............................................................ 627 . DTC Logic ............................................................. 627 . Diagnosis Procedure ............................................ 627 .

AV

U1219 AV CONTROL UNIT ............................ 613 .


Description ........................................................... 613 . DTC Logic ............................................................ 613 .

U1250 CAMERA CONTROL UNIT ................. 628


Description ............................................................ 628 . DTC Logic ............................................................. 628 . Diagnosis Procedure ............................................ 628 . P

U1220 AV CONTROL UNIT ............................ 614 .


Description ........................................................... 614 . DTC Logic ............................................................ 614 .

U1258 SATELLITE RADIO ANTENNA .......... 629


Description ............................................................ 629 . DTC Logic ............................................................. 629 . Diagnosis Procedure ............................................ 629 .

U121A AV CONTROL UNIT ............................ 615 .


Description ........................................................... 615 . DTC Logic ............................................................ 615 .

U1300 AV COMM CIRCUIT ............................ 630


2010 Murano

Revision: 2009 September

AV-7

Description ............................................................630 .

Diagnosis Procedure ............................................ 643 .

POWER SUPPLY AND GROUND CIRCUIT .. 631 .


AV CONTROL UNIT ................................................631 . AV CONTROL UNIT : Diagnosis Procedure .........631 . FRONT DISPLAY UNIT ..........................................631 . FRONT DISPLAY UNIT : Diagnosis Procedure ...631 . MULTIFUNCTION SWITCH ....................................632 . MULTIFUNCTION SWITCH : Diagnosis Procedure ......................................................................632 . CAMERA CONTROL UNIT .....................................633 . CAMERA CONTROL UNIT : Diagnosis Procedure ..633 BOSE AMP. .............................................................633 . BOSE AMP. : Diagnosis Procedure .....................633 . WOOFER .................................................................634 . WOOFER : Diagnosis Procedure .........................634 . IPOD ADAPTER ......................................................634 . iPod ADAPTER : Diagnosis Procedure ................635 .

DISK EJECT SIGNAL CIRCUIT ...................... 644 .


Description ........................................................... 644 . Diagnosis Procedure ............................................ 644 .

MICROPHONE SIGNAL CIRCUIT .................. 645 .


Description ........................................................... 645 . Diagnosis Procedure ............................................ 645 .

CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT) ................................................................ 647 .
Description ........................................................... 647 . Diagnosis Procedure ............................................ 647 .

CAMERA ON SIGNAL CIRCUIT ..................... 648 .


Description ........................................................... 648 . Diagnosis Procedure ............................................ 648 .

CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO FRONT DISPLAY UNIT) ................................................................ 649 .
Description ........................................................... 649 . Diagnosis Procedure ............................................ 649 .

RGB (R: RED) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) ....... 636 .
Description ............................................................636 . Diagnosis Procedure ............................................636 .

STEERING ANGLE SENSOR SIGNAL CIRCUIT ................................................................. 650 .


Description ........................................................... 650 . Diagnosis Procedure ............................................ 650 .

RGB (G: GREEN) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT). 637
Description ............................................................637 . Diagnosis Procedure ............................................637 .

STEERING SWITCH SIGNAL A CIRCUIT ...... 652 .


Description ........................................................... 652 . Diagnosis Procedure ............................................ 652 . Component Inspection ......................................... 653 .

RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) ....... 638 .
Description ............................................................638 . Diagnosis Procedure ............................................638 .

STEERING SWITCH SIGNAL B CIRCUIT ...... 654 .


Description ........................................................... 654 . Diagnosis Procedure ............................................ 654 . Component Inspection ......................................... 655 .

RGB SYNCHRONIZING SIGNAL CIRCUIT ... 639 .


Description ............................................................639 . Diagnosis Procedure ............................................639 .

STEERING SWITCH SIGNAL GND CIRCUIT.. 656


Description ........................................................... 656 . Diagnosis Procedure ............................................ 656 . Component Inspection ......................................... 657 .

RGB AREA (YS) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT) ....... 640 .
Description ............................................................640 . Diagnosis Procedure ............................................640 .

ECU DIAGNOSIS INFORMATION ............ 658


AV CONTROL UNIT ........................................ 658 .
Reference Values ................................................ 658 . Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM - .................................................. 664 . Fail-Safe ............................................................... 682 . DTC Index ............................................................ 684 .

HP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT) ....................... 641 .


Description ............................................................641 . Diagnosis Procedure ............................................641 .

VP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT) ....................... 642 .


Description ............................................................642 . Diagnosis Procedure ............................................642 .

FRONT DISPLAY UNIT ................................... 686 .


Reference Values ................................................ 686 . Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM - .................................................. 688 .

AUX IMAGE SIGNAL CIRCUIT ...................... 643 .


Description ............................................................643 .

BOSE AMP. ..................................................... 708 .


2010 Murano

Revision: 2009 September

AV-8

Reference Values ................................................. 708 . Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM - ................................................... 710 .

Removal and Installation ...................................... 790 .

FRONT SQUAWKER ...................................... 791


Exploded View ...................................................... 791 . Removal and Installation ...................................... 791 .

iPod ADAPTER ............................................... 730 .


Reference Values ................................................. 730 . Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM - ................................................... 732 .

REAR SPEAKER ............................................ 792


Exploded View ...................................................... 792 . Removal and Installation ...................................... 792 . C

CAMERA CONTROL UNIT ............................. 751 .


Reference Values ................................................. 751 . Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM - ................................................... 753 .

CENTER SPEAKER ........................................ 793


Exploded View ...................................................... 793 . Removal and Installation ...................................... 793 . D

SYMPTOM DIAGNOSIS ........................... 773 .


MULTI AV SYSTEM SYMPTOMS ................... 773 .
Symptom Table .................................................... 773 .

WOOFER ......................................................... 794


Exploded View ...................................................... 794 . Removal and Installation ...................................... 794 . E

BOSE AMP. ..................................................... 795


Exploded View ...................................................... 795 . Removal and Installation ...................................... 795 . F

NORMAL OPERATING CONDITION .............. 778 .


Description ........................................................... 778 .

PRECAUTION ........................................... 783 .


PRECAUTIONS ............................................... 783 .
FOR USA AND CANADA ....................................... 783 . FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" ......................... 783 . FOR USA AND CANADA : Precaution for Trouble Diagnosis ............................................................. 783 . FOR USA AND CANADA : Precaution for Harness Repair ................................................................... 783 . FOR MEXICO ......................................................... 784 . FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" .............................................. 784 . FOR MEXICO : Precaution for Trouble Diagnosis 784 .. FOR MEXICO : Precaution for Harness Repair ... 784 .

MULTIFUNCTION SWITCH ............................ 796


Exploded View ...................................................... 796 . Removal and Installation ...................................... 796 .

PRESET SWITCH ........................................... 797


Exploded View ...................................................... 797 . Removal and Installation ...................................... 797 .

STEERING SWITCH ....................................... 798


Exploded View ...................................................... 798 . Removal and Installation ...................................... 798 .

iPod ADAPTER ............................................... 799


Exploded View ...................................................... 799 . Removal and Installation ...................................... 799 . K

iPod CONNECTOR ......................................... 800


Exploded View ...................................................... 800 . Removal and Installation ...................................... 800 . L

PREPARATION ........................................ 786 .


PREPARATION ............................................... 786 .
Commercial Service Tools ................................... 786 .

AUXILIARY INPUT JACKS ............................ 801


Exploded View ...................................................... 801 . Removal and Installation ...................................... 801 . M

MICROPHONE ................................................ 802


Exploded View ...................................................... 802 . Removal and Installation ...................................... 802 . AV

REMOVAL AND INSTALLATION ............ 787 .


AV CONTROL UNIT ........................................ 787 .
Exploded View ..................................................... 787 . Removal and Installation ...................................... 787 .

GPS ANTENNA ............................................... 803


Exploded View ...................................................... 803 . Harness Layout .................................................... 803 . Removal and Installation ...................................... 804 .

FRONT DISPLAY UNIT ................................... 788 .


Exploded View ..................................................... 788 . Removal and Installation ...................................... 788 .

CAMERA CONTROL UNIT ............................. 805


Exploded View ...................................................... 805 . Removal and Installation ...................................... 805 . Adjustment ............................................................ 805 .

FRONT DOOR SPEAKER .............................. 789 .


Exploded View ..................................................... 789 . Removal and Installation ...................................... 789 .

REAR VIEW CAMERA .................................... 806


Exploded View ...................................................... 806 .

REAR DOOR SPEAKER ................................. 790 .


Exploded View ..................................................... 790 .

Revision: 2009 September

AV-9

2010 Murano

Removal and Installation ......................................806 . Adjustment ............................................................806 .

ANTENNA FEEDER (RADIO) ......................... 810 .


Harness Layout .................................................... 810 .

STEERING ANGLE SENSOR ........................ 808 .


Exploded View ......................................................808 . Removal and Installation ......................................808 .

ANTENNA FEEDER (SATELLITE RADIO) .... 811 .


Harness Layout .................................................... 811 .

ANTENNA FEEDER (GPS) ............................. 812 .


Harness Layout .................................................... 812 .

ROOF ANTENNA ........................................... 809 .


Exploded View ......................................................809 . Removal and Installation ......................................809 .

Revision: 2009 September

AV-10

2010 Murano

DIAGNOSIS AND REPAIR WORKFLOW


< BASIC INSPECTION > [BASE AUDIO]
A

BASIC INSPECTION
DIAGNOSIS AND REPAIR WORKFLOW
Work Flow
OVERALL SEQUENCE
INFOID:0000000005528411

ALNIA0182GB

DETAILED FLOW

1.GET INFORMATION FOR SYMPTOM


Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred).

AV

>> GO TO 2

2.CONFIRM THE SYMPTOM


Try to confirm the symptom described by the customer. Verify the relation between the symptom and the condition when the symptom is detected. >> GO TO 3

3.DETECT MALFUNCTIONING PART BY DIAGNOSTIC PROCEDURE


Inspect according to Diagnostic Procedure of the system.
Revision: 2009 September

AV-11

2010 Murano

DIAGNOSIS AND REPAIR WORKFLOW


< BASIC INSPECTION > Is a malfunctioning part detected? YES >> GO TO 4 NO >> GO TO 2 [BASE AUDIO]

4.REPAIR OR REPLACE THE MALFUNCTIONING PART


1. 2. Repair or replace the malfunctioning part. Reconnect parts or connectors disconnected during Diagnostic Procedure. >> GO TO 5

5.FINAL CHECK
Refer to confirmed symptom in step 2, and check that the symptom is not detected. Has the symptom been repaired? YES >> INSPECTION END. NO >> GO TO 2

Revision: 2009 September

AV-12

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BASE AUDIO]
A

SYSTEM DESCRIPTION
AUDIO SYSTEM
System Diagram
INFOID:0000000005528412

G
JSNIA1060GB

NOTE: An antenna base integrated with radio antenna amp. is adopted.

System Description
AUDIO SYSTEM
The audio system consists of the following components. Audio unit Rod antenna (AM/FM main) Glass antenna (FM sub) Steering switch Front door speakers Rear door speakers Front squawker Audio display unit

H
INFOID:0000000005528413

AM/FM Radio Mode AM/FM radio tuner is integrated into audio unit. When AM/FM radio waves are received by rod antenna, the radio waves are amplified by an antenna amp. to input them to audio unit. Sound signals are output to each speaker for the audio unit. The FM sub antenna is installed on the back door window glass and the audio unit is received. CD Mode The audio unit has CD function. The audio unit outputs sound signals to each speaker when CD is inserted into the audio unit.

AV

Revision: 2009 September

AV-13

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BASE AUDIO]
INFOID:0000000005528414

Component Parts Location

JSNIA1098ZZ

1. 4. 7.

Front squawker RH Rear door speaker LH Front door speaker RH

2. 5. 8.

Front squawker LH Antenna base (antenna amp.) Steering switch

3. 6. 9.

Front door speaker LH Rear door speaker RH Audio unit

10. Audio display unit

Component Description
Part name AUDIO UNIT AUDIO DISPLAY UNIT FRONT DOOR SPEAKER REAR DOOR SPEAKER FRONT SQUAWKER STEERING SWITCH Description Has radio function and CD playing function. Sound signals are output to each speaker.

INFOID:0000000005528415

Display images are controlled by AV communication from audio unit. Outputs sound signals from audio unit. Outputs sound (mid and low range). Outputs sound signals from audio unit. Outputs sound (mid and low range). Outputs sound signals from audio unit. Outputs sound (high and mid range). Steering switch signals (operation signals) are output to audio unit. An antenna base integrated with radio antenna amp. is adopted. ANTENNA AMP. Radio waves received by rod antenna are amplified and transmitted to audio unit. Power (antenna amp. ON signal) is supplied from audio unit.

ANTENNA BASE

Revision: 2009 September

AV-14

2010 Murano

DIAGNOSIS SYSTEM (AUDIO UNIT)


< SYSTEM DESCRIPTION > [BASE AUDIO]
A
INFOID:0000000005528416

DIAGNOSIS SYSTEM (AUDIO UNIT)


Diagnosis Description
Self-diagnosis mode can perform the following items. Versions display Channel check diagnosis Key check diagnosis AV communication diagnosis

VERSIONS DISPLAY FUNCTION


1. 2. 3. Turn ignition switch ON. Turn the audio unit off. While pressing 1 button, turn volume control dial clockwise or counterclockwise for 30 clicks or more.
D

G
JSNIA1143GB

4.

5.

Diagnosis default screen of audio display unit is displayed. NOTE: Diagnosis default screen = All icons and segments of the audio display unit are turned on. Pressing the AUDIO switch briefly displays the version display mode. Pressing the AUDIO switch briefly switches to each version display. Pressing and holding the AUDIO switch when displaying each software version returns to the diagnosis default screen.
Mode Software V###### Hardware V###### CD Mech V###### EEPROM V###### Description Audio unit software version is displayed. Audio unit hardware version is displayed. Audio unit CD mechanism version is displayed. Audio unit EEPROM version is displayed. Display unit software version is displayed. Display unit hardware version is displayed. Audio unit SDARS version is displayed. NOTE: VFFFFFF is displayed when SRARS is not available.

Version display item

Versions display

Disp SW V###### Disp HW V###### SDARS V######

6. 1. 2.

Self-diagnosis mode is canceled when the ignition switch is turned OFF. Turn ignition switch ON. Turn the audio unit off.

AV

CHANNEL CHECK DIAGNOSIS FUNCTION


O

Revision: 2009 September

AV-15

2010 Murano

DIAGNOSIS SYSTEM (AUDIO UNIT)


< SYSTEM DESCRIPTION > 3. While pressing the 1 button, turn the volume control dial clockwise or counterclockwise for 30 clicks or more. [BASE AUDIO]

JSNIA1143GB

4.

5.

The diagnosis default screen of audio display unit is displayed. NOTE: Diagnosis default screen = All icons and segments of the audio display unit are turned on. Turning the TUNE/FOLDER dial clockwise displays the channel check mode. Pressing and holding the AUDIO switch during each channel check or waiting approximately 1 second after finishing all channel checks returns to the diagnosis default screen.
Mode Channel Check Front Left Channel Check Front Right Channel Check Rear Right Channel Check Rear Left Description

Channel check item

Channel check

Connection of a speaker can be confirmed by test tone.

6. 1. 2. 3.

Self-diagnosis mode is canceled when the ignition switch is turned OFF. Turn ignition switch ON. Turn the audio unit off. While pressing the 1 button, turn the volume control dial clockwise or counterclockwise for 30 clicks or more.

KEY CHECK DIAGNOSIS FUNCTION

JSNIA1143GB

4.

5.

The diagnosis default screen of audio display unit is displayed. NOTE: Diagnosis default screen = All icons and segments of the audio display unit are turned on. Turning the TUNE/FOLDER dial counterclockwise displays the key check mode, and the pressed switch name is shown. Pressing and holding the AUDIO switch during the key check returns to the diagnosis default screen.

Revision: 2009 September

AV-16

2010 Murano

DIAGNOSIS SYSTEM (AUDIO UNIT)


< SYSTEM DESCRIPTION >
Key check item (audio unit)

[BASE AUDIO]
Display item 1 2 3 4 5 6 POWER VOLUME up Preset button 1 switch Preset button 2 switch Preset button 3 switch Preset button 4 switch Preset button 5 switch Preset button 6 switch ONOFF switch VOL up switch VOL down switch AMFM switch DISC switch AUX switch AUDIO switch TUNE/FOLDER up switch TUNE/FOLDER up switch DISP CLOCK switch SCAN switch RPT RDM switch SEEK CAT switch TRACK switch LOAD switch EJECT switch Switch name

Mode

VOLUME down AMFM Key check DISC AUX AUDIO TUNE/FOLDER up TUNE/FOLDER down DISP CLOCK SCAN RPT/RDM SEEK/TRACK up SEEK/TRACK down LOAD EJECT
Key check item (steering switch)

J
Display item STR SOURCE STR VOL UP SOURCE switch VOL up switch VOL down switch MENU up switch MENU down switch Switch name

Mode

Key check

STR VOL DOWN STR UP STR DOWN

6. 1. 2. 3.

Self-diagnosis mode is canceled when the ignition switch is turned OFF.


M

AV COMMUNICATION DIAGNOSIS FUNCTION


Turn ignition switch ON. Turn the audio unit off. While pressing the 6 button, turn the volume control dial clockwise or counterclockwise for 30 clicks or more.

AV

JSNIA1144GB

4.

Returns to diagnosis default screen and displays AV DIAGNOSIS.

Revision: 2009 September

AV-17

2010 Murano

DIAGNOSIS SYSTEM (AUDIO UNIT)


[BASE AUDIO] < SYSTEM DESCRIPTION > 5. Pressing the AUDIO switch briefly displays the AV communication diagnosis mode. Pressing the AUDIO switch briefly again switches to each AV communication display.
AV communication diagnosis item

Display item AV communication item TRANSMIT DISP DISP MPDT NO HISTORY BTHF AV TROUBLE DEL Current OK / UN OK / UN OK / UN Past OK / 0 39 OK / 0 39 OK / 0 39

Description The communication condition and error counter from the audio unit to the audio display unit are displayed. The communication condition and error counter from the audio display unit to the audio unit. Not used. The error record can be deleted.

6.

Pressing the SEEK TRACK up switch displays the confirmation screen of delete error record. Press the SEEK TRACK down switch if returning from RECORD DEL YES? to RECORD DEL NO? The item is automatically determined approximately 6 seconds after it is displayed. Then the display returns to AV TROUBLE DEL display item.
Display item Description Does not delete error record. Deletes error record.

RECORD DEL NO? RECORD DEL YES?

7.

Self-diagnosis mode is canceled when the ignition switch is turned OFF.

Revision: 2009 September

AV-18

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
A

DTC/CIRCUIT DIAGNOSIS
POWER SUPPLY AND GROUND CIRCUIT
AUDIO UNIT
AUDIO UNIT : Diagnosis Procedure
INFOID:0000000005528417

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between audio unit harness connectors and ground.
Signal name Battery power supply ACC power supply Connector No. M46 Terminal No. 19 7 Ignition switch position OFF ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> INSPECTION END NO >> Check harness between audio unit and fuse.

AV

Revision: 2009 September

AV-19

2010 Murano

STEERING SWITCH SIGNAL A CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]

STEERING SWITCH SIGNAL A CIRCUIT


Description
Transmits the steering switch signal to audio unit.
INFOID:0000000005528418

Diagnosis Procedure

INFOID:0000000005528419

1.CHECK STEERING SWITCH SIGNAL A CIRCUIT


1. 2. Disconnect audio unit connector and spiral cable connector. Check continuity between audio unit harness connector and spiral cable harness connector.
Audio unit Connector M46 Terminal 6 Spiral cable Connector M33 Terminal 24

Continuity Existed

3.

Check continuity between audio unit harness connector and ground.


Audio unit Connector M46 Terminal 6

Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK AUDIO UNIT VOLTAGE


1. 2. 3. Connect audio unit connector and spiral cable connector. Turn ignition switch ON. Check voltage between audio unit harness connector terminals.
(+) Audio unit Connector M46 Terminal 6 Connector M46 Terminal 15 Approx 5.0 V () Voltage

Is the inspection result normal? YES >> GO TO 4. NO >> Replace audio unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-21, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-20

2010 Murano

STEERING SWITCH SIGNAL A CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
INFOID:0000000005528420

Component Inspection
Measure the resistance between the steering switch connector terminals.

D
JSNIA1145GB

Standard

Steering switch Connector Terminals Connector Terminal Condition SEEK DOWN switch ON 14 M303 15 M303 17 SEEK UP switch ON SOURCE switch ON VOL UP switch ON VOL DOWN switch ON

E
Resistance

F
315 327 119 123 0 119 123 0

AV

Revision: 2009 September

AV-21

2010 Murano

STEERING SWITCH SIGNAL B CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]

STEERING SWITCH SIGNAL B CIRCUIT


Description
Transmits the steering switch signal to audio unit.
INFOID:0000000005528421

Diagnosis Procedure

INFOID:0000000005528422

1.CHECK STEERING SWITCH SIGNAL B CIRCUIT


1. 2. Disconnect audio unit connector and spiral cable connector. Check continuity between audio unit harness connector and spiral cable harness connector.
Audio unit Connector M46 Terminal 16 Spiral cable Connector M33 Terminal 31

Continuity Existed

3.

Check continuity between audio unit harness connector and ground.


Audio unit Connector M46 Terminal 16

Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK AUDIO UNIT VOLTAGE


1. 2. 3. Connect audio unit connector and spiral cable connector. Turn ignition switch ON. Check voltage between audio unit harness connector terminals.
(+) Audio unit Connector M46 Terminal 16 Connector M46 Terminal 15 Approx 5.0 V () Voltage

Is the inspection result normal? YES >> GO TO 4. NO >> Replace audio unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-23, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-22

2010 Murano

STEERING SWITCH SIGNAL B CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
INFOID:0000000005528423

Component Inspection
Measure the resistance between the steering switch connector terminals.

D
JSNIA1145GB

Standard

Steering switch Connector Terminals Connector Terminal Condition SEEK DOWN switch ON 14 M303 15 M303 17 SEEK UP switch ON SOURCE switch ON VOL UP switch ON VOL DOWN switch ON

E
Resistance

F
315 327 119 123 0 119 123 0

AV

Revision: 2009 September

AV-23

2010 Murano

STEERING SWITCH SIGNAL GND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]

STEERING SWITCH SIGNAL GND CIRCUIT


Description
Transmits the steering switch signal to audio unit.
INFOID:0000000005528424

Diagnosis Procedure

INFOID:0000000005528425

1.CHECK STEERING SWITCH SIGNAL GND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect audio unit connector and spiral cable connector. Check continuity between audio unit harness connector and spiral cable harness connector.
Audio unit Connector M46 Terminal 15 Spiral cable Connector M33 Terminal 33

Continuity Existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK GROUND CIRCUIT


1. 2. Connect audio unit connector. Check continuity between audio unit harness connector and ground.
Audio unit Connector M46 Terminal 15

Ground

Continuity Existed

Is the inspection result normal? YES >> GO TO 4. NO >> Replace audio unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-25, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-24

2010 Murano

STEERING SWITCH SIGNAL GND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BASE AUDIO]
INFOID:0000000005528426

Component Inspection
Measure the resistance between the steering switch connector terminals.

D
JSNIA1145GB

Standard

Steering switch Connector Terminals Connector Terminal Condition SEEK DOWN switch ON 14 M303 15 M303 17 SEEK UP switch ON SOURCE switch ON VOL UP switch ON VOL DOWN switch ON

E
Resistance

F
315 327 119 123 0 119 123 0

AV

Revision: 2009 September

AV-25

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]

ECU DIAGNOSIS INFORMATION


AUDIO UNIT
Reference Values
TERMINAL LAYOUT PHYSICAL VALUES
INFOID:0000000005528427

JSNIA1180ZZ

Terminal (Wire color) +

Description Signal name Input/ Output Condition

Reference value (Approx.)

2 (L)

3 (B)

Sound signal front LH

Output

Ignition switch ON

Sound output.

SKIB3609E

4 (LG)

5 (Y)

Sound signal rear LH

Output

Ignition switch ON

Sound output.

SKIB3609E

Keep pressing SOURCE switch. 6 (W) 15 (SB) Steering switch signal A Input Ignition switch ON Keep pressing Keep pressing Except for above. 7 (R) Ground ACC power supply Input Ignition switch ACC switch. switch.

0V 1.0 V 2.0 V 5.0 V Battery voltage

11 (BR)

12 (W)

Sound signal front RH

Output

Ignition switch ON

Sound output.

SKIB3609E

Revision: 2009 September

AV-26

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BASE AUDIO]
Reference value (Approx.)

B
Ignition switch ON

13 (O)

14 (P)

Sound signal rear RH

Output

Sound output.

SKIB3609E

15 (SB)

Ground

Steering switch signal ground

Ignition switch ON Ignition switch ON

Keep pressing VOL DOWN switch. Keep pressing VOL UP switch. Except for above.

0V

E
0V 1.0 V 5.0 V

16 (Y)

15 (SB)

Steering switch signal B

Input

19 (Y) 33 (G) 34 (R) 35 36 37

Ground

Battery power supply AV communication signal (L) AV communication signal (H) FM sub AM-FM main Antenna amp. ON signal

Input Input/ Output Input/ Output Input Input Output

Ignition switch OFF Ignition switch ACC

G
Battery voltage

Ground Ground Ground

J
12.0 V

AV

Revision: 2009 September

AV-27

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]
INFOID:0000000005528428

Wiring Diagram BASE AUDIO

JCNWM1833GB

Revision: 2009 September

AV-28

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]
A

AV

O
JCNWM3157GB

Revision: 2009 September

AV-29

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]

JCNWM3158GB

Revision: 2009 September

AV-30

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]
A

AV

O
JCNWM3159GB

Revision: 2009 September

AV-31

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]

JCNWM3160GB

Revision: 2009 September

AV-32

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]
A

AV

O
JCNWM3161GB

Revision: 2009 September

AV-33

2010 Murano

AUDIO UNIT
< ECU DIAGNOSIS INFORMATION > [BASE AUDIO]

JCNWM3162GB

Revision: 2009 September

AV-34

2010 Murano

AUDIO SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS > [BASE AUDIO]
A

SYMPTOM DIAGNOSIS
AUDIO SYSTEM SYMPTOMS
Symptom Table
RELATED TO AUDIO
Trouble diagnosis chart by symptom
INFOID:0000000005528429

C
Check items No sound from all speakers. Possible malfunction location / Action to take Audio unit malfunction. Refer to AV-41, "Exploded View". Sound signal malfunction between audio unit and speaker on the side where there is no sound. Antenna amp. ON signal circuit. Antenna feeder. Rod antenna. Antenna base.

Symptoms

Audio sound is not heard. There is no sound from one of speakers.

AM/FM radio is not received.

Other audio sounds are normal.

Audio display does not work.

Audio display power supply and ground circuits. AV communication circuits between audio unit and audio display.

RELATED TO STEERING SWITCH


Trouble diagnosis chart by symptom

Symptoms None of the steering switch operations work. Only specified switch cannot be operated. SOURCE, MENU UP, MENU DOWN switches of steering switch are not operational. VOL UP, VOL DOWN switches of steering switch are not operational.

Inspection location / Probable malfunction location Steering switch signal GND circuit. Refer to AV-24, "Diagnosis Procedure". Steering switch. Refer to AV-46, "Exploded View". Steering switch signal A circuit. Refer to AV-20, "Diagnosis Procedure". Steering switch signal B circuit. Refer to AV-22, "Diagnosis Procedure".

AV

Revision: 2009 September

AV-35

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS > [BASE AUDIO]

NORMAL OPERATING CONDITION


Description
INFOID:0000000005528430

NOTE: Audio operation information, refer to Owner's Manual. The majority of the audio concerns are the result of outside causes (bad CD, electromagnetic interference, etc.).

NOISE
The following noise results from variations in field strength, such as fading noise and multi-path noise, or external noise from trains and other sources. It is not a malfunction. Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking the signal. Multi-path noise: This noise results from the waves sent directly from the broadcast station arriving at the antenna at a different time from the waves that reflect off mountains or buildings. The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning. Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and operation of each piece of electrical equipment, and then determine the cause. NOTE: The source of the noise can be easily found by listening to the noise while removing the fuses of electrical components, one by one.
Types of Noise and Possible Causes
Occurrence condition Occurs only when engine is ON. A continuous growling noise occurs. The speed of the noise varies with changes in the engine speed. Possible cause Ignition components Fuel pump condenser Relay malfunction, audio unit malfunction Motor case ground Motor Rear defogger coil malfunction Open circuit in printed heater Poor ground of antenna feeder line Ground wire of body parts Ground due to improper part installation Wiring connections or a short circuit

The occurrence of the noise is linked with the operation of the fuel pump. Noise only occurs when various electrical components are operating. A cracking or snapping sound occurs with the operation of various switches. The noise occurs when various motors are operating.

The noise occurs constantly, not just under certain conditions.

A cracking or snapping sound occurs while the vehicle is being driven, especially when it is vibrating excessively.

Revision: 2009 September

AV-36

2010 Murano

PRECAUTIONS
< PRECAUTION > [BASE AUDIO]
A

PRECAUTION
PRECAUTIONS
FOR USA AND CANADA
FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000005528431

The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. Information necessary to service the system safely is included in the SRS AIR BAG and SEAT BELT of this Service Manual. WARNING: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS AIR BAG. Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS


WARNING: When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service.
I

FOR USA AND CANADA : Precaution for Trouble Diagnosis


AV COMMUNICATION SYSTEM

INFOID:0000000005528432

Do not apply voltage of 7.0 V or higher to the measurement terminals. Use the tester with its open terminal voltage at 7.0 V or less. Turn ignition switch OFF and disconnect the battery cable from the negative terminal before checking the circuit.

FOR USA AND CANADA : Precaution for Harness Repair


AV COMMUNICATION SYSTEM
Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

INFOID:0000000005528433

AV

PKIA0306E

Revision: 2009 September

AV-37

2010 Murano

PRECAUTIONS
< PRECAUTION > Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.) [BASE AUDIO]

PKIA0307E

FOR MEXICO
FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000005589988

The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. Information necessary to service the system safely is included in the SRS AIR BAG and SEAT BELT of this Service Manual. WARNING: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS AIR BAG. Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS


WARNING: When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service.

FOR MEXICO : Precaution for Trouble Diagnosis


AV COMMUNICATION SYSTEM

INFOID:0000000005589986

Do not apply voltage of 7.0 V or higher to the measurement terminals. Use the tester with its open terminal voltage at 7.0 V or less. Turn ignition switch OFF and disconnect the battery cable from the negative terminal before checking the circuit.

FOR MEXICO : Precaution for Harness Repair


AV COMMUNICATION SYSTEM

INFOID:0000000005589987

Revision: 2009 September

AV-38

2010 Murano

PRECAUTIONS
< PRECAUTION > Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).] [BASE AUDIO]
A

C
PKIA0306E

Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

G
PKIA0307E

AV

Revision: 2009 September

AV-39

2010 Murano

PREPARATION
< PREPARATION > [BASE AUDIO]

PREPARATION
PREPARATION
Commercial Service Tools
Tool name Description
INFOID:0000000005528434

Power tool

Loosening screws

PBIC0191E

Revision: 2009 September

AV-40

2010 Murano

AUDIO UNIT
< REMOVAL AND INSTALLATION > [BASE AUDIO]
A

REMOVAL AND INSTALLATION


AUDIO UNIT
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".
INFOID:0000000005528435

DISASSEMBLY
D

JPNIA0770ZZ

1. Audio unit 4. Bracket RH

2. Bracket LH

3. A/C auto amp.

J
INFOID:0000000005528436

Removal and Installation


REMOVAL
1. 2. 3. 4.

Remove cluster lid C lower. Refer to IP-12, "Exploded View". Remove instrument stay cover LH and instrument stay cover RH Refer to IP-12, "Exploded View". Remove audio unit with an A/C auto amp. as a single unit from the body. Remove bracket screws, and then remove audio unit.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-41

2010 Murano

AUDIO DISPLAY
< REMOVAL AND INSTALLATION > [BASE AUDIO]

AUDIO DISPLAY
Exploded View
INFOID:0000000005528437

JPNIA0771ZZ

1. Audio display unit 4. Front cover

2. Bracket

3. A/C display

Removal and Installation


REMOVAL
1. 2. 3. Remove center ventilator assembly. Refer to IP-12, "Exploded View". Remove audio display unit and A/C display with bracket as a single unit (1). Remove bracket screws, and then remove audio display unit.

INFOID:0000000005528438

JPNIA0772ZZ

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-42

2010 Murano

FRONT DOOR SPEAKER


< REMOVAL AND INSTALLATION > [BASE AUDIO]
A
INFOID:0000000005528439

FRONT DOOR SPEAKER


Exploded View

D
JPNIA0773ZZ

E
1. Front door speaker
INFOID:0000000005528440

Removal and Installation


REMOVAL
1. 2.

Remove front door finisher. Refer to INT-12, "FRONT DOOR FINISHER : Exploded View". Remove front door speaker screws, then disconnect front door speaker connector and remove front door speaker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-43

2010 Murano

REAR DOOR SPEAKER


< REMOVAL AND INSTALLATION > [BASE AUDIO]

REAR DOOR SPEAKER


Exploded View
INFOID:0000000005528441

JPNIA0774ZZ

1.

Rear door speaker


INFOID:0000000005528442

Removal and Installation


REMOVAL
1. 2.

Remove rear door finisher. Refer to INT-16, "REAR DOOR FINISHER : Exploded View". Remove rear door speaker screws, then disconnect rear door speaker connector and remove rear door speaker.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-44

2010 Murano

FRONT SQUAWKER
< REMOVAL AND INSTALLATION > [BASE AUDIO]
A
INFOID:0000000005528443

FRONT SQUAWKER
Exploded View

D
JPNIA0775ZZ

E
1. Front squawker
INFOID:0000000005528444

Removal and Installation


REMOVAL
1. 2.

Remove speaker grille. Refer to IP-12, "Exploded View". Remove front squawker screws, lift up the front squawker and disconnect front squawker connector. Then remove the front squawker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-45

2010 Murano

STEERING SWITCH
< REMOVAL AND INSTALLATION > [BASE AUDIO]

STEERING SWITCH
Exploded View
Refer to ST-17, "Exploded View".
INFOID:0000000005528445

Removal and Installation


REMOVAL
Refer to ST-17, "Exploded View".

INFOID:0000000005528446

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-46

2010 Murano

ROOF ANTENNA
< REMOVAL AND INSTALLATION > [BASE AUDIO]
A
INFOID:0000000005528447

ROOF ANTENNA
Exploded View

JPNIA0776ZZ

1.

Rod antenna

2.

Antenna base

Refer to GI-4, "Components" for symbols in the figure.

G
INFOID:0000000005528448

Removal and Installation


REMOVAL
1.

2. 3.

Remove headlining assembly (rear) to secure work space between vehicle and headlining. Refer to INT26, "NORMAL ROOF : Exploded View" [without sunroof] or INT-30, "SUNROOF : Exploded View" [with sunroof]. Disconnect AM/FM main connector. Remove antenna base nut, and then remove antenna base from roof panel.

INSTALLATION
Install in the reverse order of removal.
K

Antenna base mounting nut

: 6.5 Nm (0.66 kg-m, 58 in-lb)


L

CAUTION: Be careful about tightening torque. When the antenna base mounting nut tightening torque is loose, the antenna sensitivity becomes poor, and when it is excessive, the roof panel may be deformed.

AV

Revision: 2009 September

AV-47

2010 Murano

ANTENNA FEEDER (RADIO)


< REMOVAL AND INSTALLATION > [BASE AUDIO]

ANTENNA FEEDER (RADIO)


Harness Layout
INFOID:0000000005528449

JPNIA0777GB

Revision: 2009 September

AV-48

2010 Murano

DIAGNOSIS AND REPAIR WORK FLOW


< BASIC INSPECTION > [BOSE AUDIO WITHOUT NAVIGATION]
A

BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
OVERALL SEQUENCE
INFOID:0000000005528450

JSNIA0732GB

Reference 1 Refer to AV-87, "CONSULT-III Function (MULTI AV)". Reference 2 Refer to AV-197, "DTC Index". Reference 3 Refer to AV-520, "Symptom Table".

AV

DETAILED FLOW

1.INTERVIEW AND SYMPTOM CONFIRMATION


Check the malfunction symptoms by performing the following items. Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred). Check the symptom. Is the occurring symptom a malfunction? YES >> GO TO 2. NO >> INSPECTION END

2.DIAGNOSIS WITH CONSULT-III


Revision: 2009 September

AV-49

2010 Murano

DIAGNOSIS AND REPAIR WORK FLOW


[BOSE AUDIO WITHOUT NAVIGATION] < BASIC INSPECTION > 1. Connect CONSULT-III and perform a self-diagnosis for MULTI AV. Refer to AV-87, "CONSULT-III Function (MULTI AV)". NOTE: Skip to step 4 of the diagnosis procedure if MULTI AV is not displayed. 2. Check if any DTC is displayed in the self-diagnosis results. Is DTC displayed? YES >> GO TO 3. NO >> GO TO 4.

3.TROUBLE DIAGNOSIS FOR DTC


1. 2. Check the DTC indicated in the self-diagnosis results. Perform the relevant diagnosis referring to the DTC Index. Refer to AV-197, "DTC Index". >> GO TO 5.

4.TROUBLE DIAGNOSIS FOR SYMPTOMS


Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to AV-520, "Symptom Table". >> GO TO 5.

5.ERROR PART REPAIR


Repair or replace the identified malfunctioning parts. Perform a self-diagnosis for MULTI AV with CONSULT-III. NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the self-diagnosis results. 3. Check that the symptom does not occur. Does the symptom occur? YES >> GO TO 1. NO >> INSPECTION END 1. 2.

Revision: 2009 September

AV-50

2010 Murano

INSPECTION AND ADJUSTMENT


< BASIC INSPECTION > [BOSE AUDIO WITHOUT NAVIGATION]
A

INSPECTION AND ADJUSTMENT


ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL
ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description
INFOID:0000000005528451

Always correct the center position of the rear view monitor's possible route line after disconnecting the battery negative terminal.

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement
INFOID:0000000005528452

1.CORRECTION OF CENTER POSITION OF REAR VIEW MONITOR'S POSSIBLE ROUTE LINE


Refer to the following for details. >> Refer to AV-51, "REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement".
E

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT


ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000005528453

When camera control unit is replaced, the center position of rear view monitor possible route line is corrected.

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

INFOID:0000000005528454

1.CORRECTION OF CENTER POSITION OF REAR VIEW MONITOR'S POSSIBLE ROUTE LINE


Refer to the following for details. >> Refer to AV-51, "REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement".

REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT


REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Description
Adjust the center position of the possible route line of the rear view monitor if it is shifted.
INFOID:0000000005528455

REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement

INFOID:0000000005528456

AV

1.STEERING OPERATION
Steer the steering wheel to the leftmost and rightmost positions. >> GO TO 2
O

2.DRIVING
Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more. >> END

Revision: 2009 September

AV-51

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]

SYSTEM DESCRIPTION
MULTI AV SYSTEM
System Diagram
WITHOUT DVD ENTERTAINMENT SYSTEM
INFOID:0000000005528457

JSNIA1061GB

NOTE: Woofer, illustrated in the above figure, integrates two woofers and a woofer amp. In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

Revision: 2009 September

AV-52

2010 Murano

MULTI AV SYSTEM
[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.

C
JSNIA1062GB

AV

Revision: 2009 September

AV-53

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > WITH DVD ENTERTAINMENT SYSTEM [BOSE AUDIO WITHOUT NAVIGATION]

JSNIA1063GB

NOTE: Woofer, illustrated in the above figure, integrates two woofers and a woofer amp. In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

Revision: 2009 September

AV-54

2010 Murano

MULTI AV SYSTEM
[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > An antenna base integrated with radio antenna and satellite radio antenna is adopted.

C
JSNIA1062GB

System Description
MULTI AV system means that the following systems are integrated.
System name AUDIO SYSTEM REAR VIEW MONITOR SYSTEM DVD ENTERTAINMENT SYSTEM HANDS-FREE PHONE SYSTEM System explanation AV-64, "System Description" AV-61, "System Description" AV-68, "System Description" AV-71, "System Description"

D
INFOID:0000000005528458

VEHICLE INFORMATION SYSTEM

Indicates the status of audio, climate control system, fuel economy and maintenance. AV control unit displays the fuel consumption status while receiving data signals through CAN communication from ECM, combination meter and BCM. Refer to AUXILIARY INPUT SYSTEM shown below.

AUXILIARY INPUT SYSTEM

I AV control unit functions by transmitting/receiving data one by one with each unit (slave unit) that configures them completely as a master unit by connecting between units that configure MULTI AV system with two AV communication lines (H, L). J Two AV communication lines (H, L) adopt a twisted pair line that is resistant to noise. AV control unit is connected by CAN communication, and it receives data signals from ECM and combination meter. It computes and displays fuel economy information value with the obtained information. Transmitting/receiving of data signals are performed by BCM. Also, it transmits the required signal of vehicle setting K and receives the response signal. AV control unit is connected with front display unit and serial communication, and it transmits the required signal of display and display control and receives the response signal from front display unit. It is also connected with satellite radio by serial communication, transmits the operating signal and receives the display L signal. NOTE: AV control unit can perform CONSULT-III self-operating function and on board self-diagnosis. M CONSULT-III self-diagnosis: refer to AV-87, "CONSULT-III Function (MULTI AV)". On board self-diagnosis: refer to AV-74, "Diagnosis Description". On board self-diagnosis of TEL adapter unit can be performed. AV Refer to AV-91, "Diagnosis Description" for on board self-diagnosis.

AUXILIARY INPUT SYSTEM


Image and sound can be output from an external device by connecting a device with auxiliary input jacks. Operation can be performed with multifunction switch and steering switch. Multifunction switch transmits operation signal to AV control unit by AV communication.
Without DVD Entertainment System The AUX image signal is input from the auxiliary input jacks to the AV control unit. The AV control unit outputs AUX image signal to the front display unit. O

Revision: 2009 September

AV-55

2010 Murano

MULTI AV SYSTEM
[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > The AUX sound signal is input from the auxiliary input jacks to the AV control unit. The AV control unit outputs the AUX sound signal to BOSE amp. The BOSE amp. outputs the AUX sound signal to woofer and each speaker.

JSNIA1186GB

With DVD Entertainment System The AUX sound signal input from the external input device is transmitted from auxiliary input jacks to DVD player. DVD player transmits it to AV control unit. AV control unit transmits the AUX sound signal to BOSE amp. The BOSE amp. outputs the AUX sound signal to woofer and each speaker. The AUX image signal input from the external input device is transmitted to the video distributor. The video distributor transmits the AUX image signal to the AV control unit and rear display unit.

JSNIA1064GB

Revision: 2009 September

AV-56

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528459

Component Parts Location

JSNIA1097ZZ

1. 4. 7.

Center speaker Rear door speaker LH TEL adapter unit

2. 5. 8.

Front squawker LH Rear speaker LH BOSE amp.

3. 6. 9.

Front door speaker LH Satellite radio tuner Woofer

AV

10. Rear view camera 13.

11. Camera control unit

12. Rear speaker RH 15. Rear display unit 18. Microphone 21. Auxiliary input jacks 24. DVD player 27. AV control unit Luggage side finisher lower RH is removed condition Console finisher is removed condition

Antenna base (antenna amp. and sat14. Rear door speaker RH ellite antenna) 17. Front squawker RH 20. Steering switch 23. iPod connector 26. Preset switch 29. Front display unit

16. Front door speaker RH 19. Steering angle sensor 22. Video distributor 25. iPod adapter 28. Multifunction switch A. D.

Luggage floor finisher is removed conB. dition Spiral cable part E.

Luggage floor finisher is removed conC. dition Console rear finisher is removed conF. dition

Revision: 2009 September

AV-57

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528460

Component Description
Part name Description

AV CONTROL UNIT

It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. AV control unit includes audio function and vehicle information function. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). The camera image signal is input from the camera control unit. The AV control unit outputs camera image signal to the front display unit. BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Power (signal VCC and inverter VCC) is transmitted to front display unit. Without DVD entertainment system Auxiliary image and auxiliary sound signals are input from the auxiliary input jacks. With DVD entertainment system Composite image signal (auxiliary and DVD images) is input from the video distributor. Sound signal (DVD and auxiliary sounds) is input from the DVD player. It receives the image signal from the DVD player, and auxiliary input jack, and then transmits it to the AV control unit and rear display unit. Composite synchronize signal is output to rear display unit. It transmits the headphone ON signal to the rear display unit, and then receives the remote controller operation signal from the rear display unit. Front display image is controlled by the serial communication from AV control unit. It receives the power (signal VCC and inverter VCC) from the AV control unit and operates. RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Synchronizing signal (HP, VP) is output to AV control unit. Camera image signal is input from AV control unit. Without DVD entertainment system Auxiliary image signal is input from AV control unit. With DVD entertainment system Composite image signal (auxiliary and DVD images) is input from the AV control unit. The rear display unit has functions of remote control receiver and headphone amp. Transmits the headphone sound signal when receiving headphone ON signal from the video distributor. Headphone sound signal is input from DVD player via wiring harnesses and outputs the signal to headphones via infrared wireless communication. Receives the operation signal from the remote controller and transmits the signal to the video distributor via serial communication. Rear display image is controlled by the serial communication from video distributor. RGB image signal is input from video distributor (RGB image and RGB area). Composite image signal (DVD and auxiliary images) is input from the video distributor. Synchronize signal (HP, VP) is output to video distributor. It transmits the playback DVD image signal to the video distributor. It transmits the playback DVD sound signal to the AV control unit. It also transmits the input AUX sound signal to the AV control unit.

VIDEO DISTRIBUTOR

FRONT DISPLAY UNIT

REAR DISPLAY UNIT

DVD PLAYER

Revision: 2009 September

AV-58

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION >
Part name BOSE AMP.

[BOSE AUDIO WITHOUT NAVIGATION]


Description Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker. Woofer amp. ON signal is transmitted to woofer. Composed of two woofers and a woofer amp. Inputs power (amp. ON) and sound signal from BOSE amp. Outputs low frequency sound. Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated. The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch. Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated. The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch. The disk ejection operating signal is performed by wiring harness. Operations such as audio and hands-free phone are possible. Steering switch signal (operation signal) is output to AV control unit. Used only when hands-free phone is operated. Outputs Mic. signal (TEL voice signal) to the TEL adapter unit. The power (Mic. power supply) is supplied from the TEL adapter unit. Without DVD entertainment system The image signal of the auxiliary input is output via the AV control unit to the front display, and it outputs the sound signal to the AV control unit. With DVD entertainment system The AUX image signal of the auxiliary input is output via the video distributor to the AV control unit and rear display unit, and it outputs the AUX sound signal to the DVD player. An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted. ANTENNA AMP. Radio signal received by rod antenna is amplified and transmitted to AV control unit. Power (antenna amp. ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA Receives the satellite radio wave and outputs it to the satellite radio tuner. Camera image signal is input from rear view camera. Camera image signal output to AV control unit. Power (camera ON signal) is transmitted to rear view camera. AV control unit recognizes the presence of camera system with camera connection recognition signal. Camera control unit is connected via AV communication. The image of vehicle rear view is transmitted to camera control unit. It receives the power (camera ON signal) from the camera control unit and operates. Steering signal necessary for possible route line control is transmitted to camera control unit.

WOOFER

FRONT DOOR SPEAKER REAR DOOR SPEAKER FRONT SQUAWKER REAR SPEAKER CENTER SPEAKER

MULTIFUNCTION SWITCH

PRESET SWITCH

STEERING SWITCH

MICROPHONE

AUXILIARY INPUT JACKS

ANTENNA BASE

AV

CAMERA CONTROL UNIT

REAR VIEW CAMERA

STEERING ANGLE SENSOR

Revision: 2009 September

AV-59

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION >
Part name

[BOSE AUDIO WITHOUT NAVIGATION]


Description Inputs the TEL voice signal from TEL antenna and outputs it to the AV control unit. It is connected with the AV control unit via AV communication and controlled with the AV control unit. Receives the TEL voice signal and outputs it to the TEL adapter unit. Inputs the satellite radio signal from satellite radio antenna and outputs the sound signal to the AV control unit. It is controlled with the AV control unit and serial communication (communication signal and request signal). Inputs iPod sound signal from iPod, and outputs iPod sound signal to AV control unit.

TEL ADAPTER UNIT

TEL ANTENNA

SATELLITE RADIO TUNER

iPod ADAPTER

Receiving/transmitting of iPod operation signals are performed as follows: - between AV control unit and iPod adapter: AV communication. - between iPod and iPod adapter: serial communication.

Revision: 2009 September

AV-60

2010 Murano

REAR VIEW MONITOR SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528461

REAR VIEW MONITOR SYSTEM


System Diagram

F
JSNIA1068GB

System Description
CAMERA IMAGE OPERATION PRINCIPLE

INFOID:0000000005528462

Power is supplied to rear view camera from camera control unit and outputs camera image signal to camera control unit when selector lever is set to R position and the reverse signal on camera control unit is input. Camera control unit synthesizes guide lines and possible route lines with camera image signal from rear view camera, and transmits camera image signal to the AV control unit. In this case, since the reverse signal is also input to AV control unit, the AV control unit recognizes that the selector lever is in the R position, and it switches communication signal between AV control unit and front display unit, and image that is displayed on the front display unit by RGB image signal with rear view monitor image. In addition, possible route lines are controlled by original sensor signal from steering angle sensor. The AV control unit determines whether rear view camera is equipped or not, based on the presence of camera connection recognition signal. It switches to rear view monitor image at the time of reverse signal input when it is equipped. Warning message under the rear view monitor display is described by AV control unit. AV control unit is connected in communication with camera control unit and front display unit, and it controls operation of rear view monitor system.

AV

Revision: 2009 September

AV-61

2010 Murano

REAR VIEW MONITOR SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528463

Component Parts Location

JSNIA1097ZZ

1. 4. 7.

Center speaker Rear door speaker LH TEL adapter unit

2. 5. 8.

Front squawker LH Rear speaker LH BOSE amp.

3. 6. 9.

Front door speaker LH Satellite radio tuner Woofer

10. Rear view camera 13.

11. Camera control unit

12. Rear speaker RH 15. Rear display unit 18. Microphone 21. Auxiliary input jacks 24. DVD player 27. AV control unit Luggage side finisher lower RH is removed condition Console finisher is removed condition

Antenna base (antenna amp. and sat14. Rear door speaker RH ellite antenna) 17. Front squawker RH 20. Steering switch 23. iPod connector 26. Preset switch 29. Front display unit

16. Front door speaker RH 19. Steering angle sensor 22. Video distributor 25. iPod adapter 28. Multifunction switch A. D.

Luggage floor finisher is removed conB. dition Spiral cable part E.

Luggage floor finisher is removed conC. dition Console rear finisher is removed conF. dition

Revision: 2009 September

AV-62

2010 Murano

REAR VIEW MONITOR SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528464

Component Description
Part name Description

AV CONTROL UNIT

Camera image signal is input from camera control unit, and it is output to front display unit when input reverse signal. Image on display is changed to rear view monitor with the communication for AV control unit and front display unit. Warning displayed in rear view monitor image is illustrated. Camera image signal is input from AV control unit. RGB image signal for warning display is input from AV control unit. Rear view monitor image is changed with the serial communication for AV control unit. Camera image signal is input from rear view camera. Camera image signal output to AV control unit. Power (camera ON signal) is transmitted to rear view camera. AV control unit recognizes the presence of camera system with camera connection recognition signal. Camera control unit is connected via AV communication. The image of vehicle rear view is transmitted to camera control unit. It receives the power (camera ON signal) from the camera control unit and operates. Steering signal necessary for possible route line control is transmitted to camera control unit.

FRONT DISPLAY UNIT

CAMERA CONTROL UNIT

REAR VIEW CAMERA

STEERING ANGLE SENSOR

AV

Revision: 2009 September

AV-63

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]

AUDIO SYSTEM
System Diagram
INFOID:0000000005528465

JSNIA1065GB

NOTE: Woofer, illustrated in the above figure, integrates two woofers and a woofer amp. In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH. An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.

JSNIA1062GB

System Description

INFOID:0000000005528466

The audio system is equipped with the following functions. Each function can be operated with the multifunction switch, preset switch or steering switch. It indicates the operation status of AUDIO to the front display unit.
Function AM/FM radio Satellite radio CD mode iPod connection AUX mode DVD mode

FUNCTION DESCRIPTION
Operating Signal Audio system operation can be performed with multifunction switch, preset switch, and steering switch. Operating signal is transmitted to AV control unit with AV communication when it is operated by multifunction switch or preset switch. The disk ejection operating signal is performed by wiring harness. Operating signal is transmitted to AV control unit with steering switch signal when it is operated by steering switch.

Revision: 2009 September

AV-64

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
A Screen Front Display The display switching of the screen is performed with the serial communication signal between the front display unit and the AV control unit. The image signal to display operating condition is performed with RGB image signal, RGB area signal and RGB image synchronizing signal. AM/FM Radio Mode AM/FM radio tuner is built into AV control unit. AM/FM radio wave is received by rod antenna, next it is amplified by antenna amp., and finally it is input to AV control unit. The FM sub antenna is installed on the back door window glass and the AV control unit is received. Audio signal is input to BOSE amp. and BOSE amp. outputs to woofer and each speaker for AV control unit. Satellite Radio Mode Satellite radio tuner is controlled by serial communication and request signal with AV control unit. Satellite radio wave is received by satellite radio antenna, and it is input to satellite radio tuner. Satellite radio tuner outputs satellite radio sound signal to AV control unit. AV control unit outputs satellite radio sound signal to BOSE amp. and BOSE amp. outputs the sound signal to each speaker and woofer. CD Mode CD function is built into AV control unit. AV control unit outputs audio signal to BOSE amp. and BOSE amp. outputs to woofer and each speaker when CD is inserted to AV control unit. iPod Connection

Connect iPod and iPod adapter with wire harness and iPod adapter input iPod sound signal from iPod. When iPod mode is selected, iPod adapter output iPod sound signal to AV control unit. AV control unit output sound signal to BOSE amp., and BOSE amp. output sound signal to woofer and each speaker. Receiving/transmitting of iPod operation signals are performed as follows: - between AV control unit and iPod adapter: AV communication. - between iPod and iPod adapter: serial communication. The iPod connection status can be recognized if iPod adapter receives iPod connection recognition signal. The iPod adapter can charge iPod.
AUX Mode Refer to AV-55, "System Description". DVD Mode Refer to AV-68, "System Description".

AV

Revision: 2009 September

AV-65

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528467

Component Parts Location

JSNIA1097ZZ

1. 4. 7.

Center speaker Rear door speaker LH TEL adapter unit

2. 5. 8.

Front squawker LH Rear speaker LH BOSE amp.

3. 6. 9.

Front door speaker LH Satellite radio tuner Woofer

10. Rear view camera 13.

11. Camera control unit

12. Rear speaker RH 15. Rear display unit 18. Microphone 21. Auxiliary input jacks 24. DVD player 27. AV control unit Luggage side finisher lower RH is removed condition Console finisher is removed condition

Antenna base (antenna amp. and sat14. Rear door speaker RH ellite antenna) 17. Front squawker RH 20. Steering switch 23. iPod connector 26. Preset switch 29. Front display unit

16. Front door speaker RH 19. Steering angle sensor 22. Video distributor 25. iPod adapter 28. Multifunction switch A. D.

Luggage floor finisher is removed conB. dition Spiral cable part E.

Luggage floor finisher is removed conC. dition Console rear finisher is removed conF. dition

Revision: 2009 September

AV-66

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528468

Component Description
Part name AV CONTROL UNIT Description

The AM/FM receiving function and the CD playing function are equipped. BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Front display image is controlled by the serial communication from AV control unit. RGB image signal (audio operation condition) is input from AV control unit. Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker. Woofer amp. ON signal is transmitted to woofer. Composed of two woofers and a woofer amp. Inputs power (amp. ON) and sound signal from BOSE amp. Outputs low frequency sound. Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated. The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch. Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated. The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch. The disk ejection operating signal is performed by wiring harness. Operations such as audio and hands-free phone are possible. Steering switch signal (operation signal) is output to AV control unit. An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted. ANTENNA AMP. Radio signal received by rod antenna is amplified and transmitted to AV control unit. Power (antenna amp. ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA Receives the satellite radio wave and outputs it to the satellite radio tuner. Inputs the satellite radio signal from satellite radio antenna and outputs the sound signal to the AV control unit. It is controlled with the AV control unit and serial communication (communication signal and request signal). Inputs iPod sound signal from iPod, and outputs iPod sound signal to AV control unit.

FRONT DISPLAY UNIT

BOSE AMP.

WOOFER

FRONT DOOR SPEAKER REAR DOOR SPEAKER FRONT SQUAWKER REAR SPEAKER CENTER SPEAKER

MULTIFUNCTION SWITCH

PRESET SWITCH

STEERING SWITCH

ANTENNA BASE

AV

SATELLITE RADIO TUNER

iPod ADAPTER

Receiving/transmitting of iPod operation signals are performed as follows: - between AV control unit and iPod adapter: AV communication. - between iPod and iPod adapter: serial communication.

Revision: 2009 September

AV-67

2010 Murano

DVD ENTERTAINMENT SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]

DVD ENTERTAINMENT SYSTEM


System Diagram
INFOID:0000000005528469

JSNIA1069GB

System Description

INFOID:0000000005528470

The passengers can enjoy watching DVDs in the rear seat with the rear display unit. They can also listen to a DVD and AUX in the rear seat independently by cordless headphones.

FUNCTION DESCRIPTION
Operating Signal The mobile entertainment system can be controlled by the rear seat remote controller. It receives the operation signal of the rear seat remote controller by the rear display unit, and then transmits it to the video distributor. Screen Rear Display Switching of display is performed with serial communication between rear display unit and video distributor. The rear display unit receives the DVD/AUX image signal and RGB image signal from the video distributor. Screen Front Display Switching of display is performed with serial communication between front display unit and AV control unit. The front display unit receives the DVD/AUX image signal from the AV control unit. The front display unit receives the RGB image signal from the AV control unit. DVD Mode The DVD player is connected to the AV control unit via AV communication and controlled by the AV control unit. The DVD player sound signal is output to the AV control unit. The AV control unit outputs DVD player sound signal to BOSE amp. The BOSE amp. outputs it to woofer and each speaker. The DVD image signal is output to the video distributor. The video distributor outputs it to AV control unit and rear display unit. The AV control unit output DVD image signal to front display unit. AUX Mode Refer to AV-55, "System Description".

Revision: 2009 September

AV-68

2010 Murano

DVD ENTERTAINMENT SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528471

Component Parts Location

JSNIA1097ZZ

1. 4. 7.

Center speaker Rear door speaker LH TEL adapter unit

2. 5. 8.

Front squawker LH Rear speaker LH BOSE amp.

3. 6. 9.

Front door speaker LH Satellite radio tuner Woofer

AV

10. Rear view camera 13.

11. Camera control unit

12. Rear speaker RH 15. Rear display unit 18. Microphone 21. Auxiliary input jacks 24. DVD player 27. AV control unit Luggage side finisher lower RH is removed condition Console finisher is removed condition

Antenna base (antenna amp. and sat14. Rear door speaker RH ellite antenna) 17. Front squawker RH 20. Steering switch 23. iPod connector 26. Preset switch 29. Front display unit

16. Front door speaker RH 19. Steering angle sensor 22. Video distributor 25. iPod adapter 28. Multifunction switch A. D.

Luggage floor finisher is removed conB. dition Spiral cable part E.

Luggage floor finisher is removed conC. dition Console rear finisher is removed conF. dition

Revision: 2009 September

AV-69

2010 Murano

DVD ENTERTAINMENT SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528472

Component Description
Part name Description

AV CONTROL UNIT

It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. AV control unit includes audio function and vehicle information function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Composite image signal (auxiliary and DVD images) is input from the video distributor. Sound signal (DVD and auxiliary sounds) is input from the DVD player. It receives the image signal from the DVD player, and auxiliary input jack, and then transmits it to the AV control unit and rear display unit. Composite synchronize signal is output to rear display unit. It transmits the headphone ON signal to the rear display unit, and then receives the remote controller operation signal from the rear display unit. Front display image is controlled by the serial communication from AV control unit. RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Synchronizing signal (HP, VP) is output to AV control unit. Composite image signal (auxiliary and DVD images) is input from the AV control unit. The rear display unit has functions of remote control receiver and headphone amp. Transmits the headphone sound signal when receiving headphone ON signal from the video distributor. Headphone sound signal is input from DVD player via wiring harnesses and outputs the signal to headphones via infrared wireless communication. Receives the operation signal from the remote controller and transmits the signal to the video distributor via serial communication. Rear display image is controlled by the serial communication from video distributor. RGB image signal is input from video distributor (RGB image and RGB area). Composite image signal (DVD and auxiliary images) is input from the video distributor. Synchronize signal (HP, VP) is output to the video distributor. It transmits the playback DVD image signal to the video distributor. It transmits the playback DVD sound signal to the AV control unit. It also transmits the input AUX sound signal to the AV control unit. Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker. Woofer amp. ON signal is transmitted to woofer. Composed of two woofers and a woofer amp. Inputs power (amp. ON) and sound signal from BOSE amp. Outputs low frequency sound. Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range).

VIDEO DISTRIBUTOR

FRONT DISPLAY UNIT

REAR DISPLAY UNIT

DVD PLAYER

BOSE AMP.

WOOFER

FRONT DOOR SPEAKER REAR DOOR SPEAKER FRONT SQUAWKER REAR SPEAKER CENTER SPEAKER

Revision: 2009 September

AV-70

2010 Murano

HANDS-FREE PHONE SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528473

HANDS-FREE PHONE SYSTEM


System Diagram

D
JSNIA1076GB

System Description

INFOID:0000000005528474

TEL adapter unit is controlled with AV communication from AV control unit. The connection between portable telephone and TEL adapter unit is performed with Bluetooth communication. The voice guidance signal is input from the TEL adapter unit to the AV control unit and output via BOSE amp. to the front door speaker when operating the cellular phone. TEL adapter unit has the on board self-diagnosis function. Refer to AV-91, "Diagnosis Description".

WHEN RECEIVING A CALL


TEL voice signal received with the portable telephone is input from TEL antenna via TEL adapter unit to AV control unit with Bluetooth communication and output via BOSE amp. to the front door speaker. The operation is performed with the steering switch or voice recognition function (TEL operation only).
H

WHEN A CALL IS TRANSMITTED


Speech sounds (TEL voice signal) are input from the microphone to the TEL adapter unit. It is input from the TEL antenna via Bluetooth communication to the portable telephone. It is transmitted to the phone on the other side. The operation is performed with the steering switch or voice recognition function (TEL operation only).

AV

Revision: 2009 September

AV-71

2010 Murano

HANDS-FREE PHONE SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528475

Component Parts Location

JSNIA1097ZZ

1. 4. 7.

Center speaker Rear door speaker LH TEL adapter unit

2. 5. 8.

Front squawker LH Rear speaker LH BOSE amp.

3. 6. 9.

Front door speaker LH Satellite radio tuner Woofer

10. Rear view camera 13.

11. Camera control unit

12. Rear speaker RH 15. Rear display unit 18. Microphone 21. Auxiliary input jacks 24. DVD player 27. AV control unit Luggage side finisher lower RH is removed condition Console finisher is removed condition

Antenna base (antenna amp. and sat14. Rear door speaker RH ellite antenna) 17. Front squawker RH 20. Steering switch 23. iPod connector 26. Preset switch 29. Front display unit

16. Front door speaker RH 19. Steering angle sensor 22. Video distributor 25. iPod adapter 28. Multifunction switch A. D.

Luggage floor finisher is removed conB. dition Spiral cable part E.

Luggage floor finisher is removed conC. dition Console rear finisher is removed conF. dition

Revision: 2009 September

AV-72

2010 Murano

HANDS-FREE PHONE SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528476

Component Description
Part name Description

AV CONTROL UNIT

Inputs TEL voice signal or voice guidance signal from TEL adapter unit and outputs it to BOSE amp. during reception. Connects with TEL adapter unit and AV communication and controls hands free phone system. Display image is controlled by the serial communication from AV control unit. Inputs RGB image signal (RGB, RGB area and RGB synchronizing) from AV control unit and displays the status of hands free phone system. Inputs TEL voice signal or voice guidance signal from AV control unit and outputs it to front speaker. Outputs the TEL voice signal or voice guidance signal from BOSE amp. Adjust the sound when using hands-free phone system. The operation signal is transmitted to the AV control unit via AV communication. The hands-free phone system can be operated. Steering switch signal (operation signal) is output to AV control unit. Uses when operating the hands-free phone. Outputs Mic. signal (TEL voice signal) to the TEL adapter unit. The power (Mic. power supply) is supplied from the TEL adapter unit. Receives the steering switch signal (operation signal) from the steering switch. Inputs the TEL voice signal from TEL antenna during reception and outputs it to the AV control unit. Inputs the TEL voice signal from microphone during speech recognition and outputs it to the TEL antenna. Controlled by AV communication transmitted from AV control unit. Connects with the portable telephone via Bluetooth and communicates the TEL voice signal.

FRONT DISPLAY UNIT

BOSE AMP. FRONT DOOR SPEAKER FRONT SQUAWKER PRESET SWITCH

STEERING SWITCH

MICROPHONE

TEL ADAPTER UNIT

TEL ANTENNA

AV

Revision: 2009 September

AV-73

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


Diagnosis Description
MULTIFUNCTION SWITCH AND PRESET SWITCH SELF-DIAGNOSIS FUNCTION
The ON/OFF operation (continuity) of each switch in the multifunction switch and preset switch can be checked.
Self-Diagnosis Mode Press the BACK switch and the switch of the 8-direction switches within 10 seconds after turning the ignition switch from OFF to ACC and hold them for 3 seconds or more. Then the buzzer sounds, all indicators of the preset switch illuminate, and the self-diagnosis mode starts. The continuity of each switch at the ON position can be checked by pressing the switch. The buzzer sounds if the switch is normal. NOTE: The disk eject switch cannot be checked.
JSNIA1072GB INFOID:0000000005528477

Finishing Self-diagnosis Mode Self-diagnosis mode is canceled when the ignition switch is turned OFF.

MULTI AV SYSTEM ON BOARD DIAGNOSIS FUNCTION


The AV control unit diagnosis function starts up with multifunction switch operation and the AV control unit performs a diagnosis for each unit in the system during the on board diagnosis. Perform a CONSULT-III diagnosis if the on board diagnosis does not start, e.g., if the screen does not display anything, the multifunction switch does not function, etc.

ON BOARD DIAGNOSIS
Description The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and a confirmation/adjustment mode for operating manually. Self-diagnosis mode performs the AV control unit diagnosis and the connection diagnosis between each of the units that make up the system, and it indicates the results to the display. The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and set values, as well as to monitor the system error records and system communication status. The checking, modifying or adjusting generally requires human intervention and judgment (the system cannot make judgment automatically). On Board Diagnosis Item
Mode Self-Diagnosis Description AV control unit diagnosis Perform the connection diagnosis between each of the units.

Revision: 2009 September

AV-74

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Mode Display Diagnosis Vehicle Signals Speaker Test Climate Control* Confirmation/ Adjustment Error History

[BOSE AUDIO WITHOUT NAVIGATION]


Description The confirmation of the tint with the color spectrum bar display and shading of color with the gradation bar display can be performed. Diagnosis of signals can be performed for vehicle speed, parking brake, lights, ignition switch, and reverse. The connection of a speaker can be confirmed by test tone. Not used. System malfunctions and the frequency when occurring in the past are displayed. When the malfunctioning item is selected, the time and place that the selected malfunction last occurred are displayed. The signal connected to camera control unit can be checked and the guiding line position that overlaps rear view camera image can be adjusted. The transmitting/receiving of CAN communication can be monitored. The communication condition of each unit of MULTI AV system can be monitored. Erase the connection history of unit and error history Initializes the AV control unit memory.

Camera Cont. Vehicle CAN Diagnosis AV COMM Diagnosis Delete Unit Connection Log Initialize Settings NOTE:

*: On-board self-diagnosis is not supported. Only CONSULT-III is supported.

STARTING PROCEDURE
1. 2. 3. Start the engine. Turn the audio system OFF. While pressing the SETTING button, turn the volume control dial clockwise or counterclockwise for 40 clicks or more. (When the self-diagnosis mode is started, a short beep will be heard.) Shifting from current screen to previous screen is performed by pressing the BACK button.

JSNIA1073GB

4.

The trouble diagnosis initial screen is displayed, and then the items of Self Diagnosis and Confirmation/Adjustment can be selected.

AV

O
JSNIA0138GB

SELF-DIAGNOSIS MODE

Revision: 2009 September

AV-75

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > 1. Start the self-diagnosis function and select Self-diagnosis. NOTE: Because the start condition of diagnosis function is a switch operation, the on board diagnosis function cannot start up if any malfunction is detected in the AV communication circuit between AV control unit and multifunction switch. Self-diagnosis subdivision screen is displayed, and the selfdiagnosis mode starts. The bar graph visible on the center of the self-diagnosis subdivision screen indicates progress of the trouble diagnosis.
JSNIA0139GB

2.

Diagnosis results are displayed after the self-diagnosis is completed. The unit names and the connection lines are color-coded according to the diagnostic results. Connection line Green Yellow Green
JSNIA1071GB

Diagnosis results Normal Connection malfunction Unit malfunction Note


NOTE:

Unit Green Gray Red

Only the control unit (AV control unit) is displayed in red. Replace AV control unit if Self-Diagnosis did not run because of a control unit malfunction is indicated. The symptom is AV control unit internal error. Refer to AV-534, "Exploded View".

If multiple errors occur at the same time for a single unit, the screen switch colors are determined according to the following order of priority: red > gray. The comments of the self-diagnosis results can be viewed with a component in the diagnosis result screen.

JSNIA0141GB

SELF-DIAGNOSIS RESULTS
Check the applicable display at the following table, and then repair the malfunctioning parts. NOTE: Because the start condition of diagnosis function is a switch operation, the on board diagnosis function cannot be started up if any malfunction is detected in the AV communication circuit between AV control unit and multifunction switch.
Self-diagnosis Result Chart

Revision: 2009 September

AV-76

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis results

[BOSE AUDIO WITHOUT NAVIGATION]


Detection logic Possible malfunction location / Action to take

C
Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit.

Malfunction is detected in AV control unit power supply and ground circuits.


JSNIA1077GB

NOTE: When a control unit malfunction is detected (red in unit display), connection malfunctions with other connection unit may be displayed. Self-Diagnosis did not run because of a control unit malfunction

G
When either one of the following items are detected: serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning.
JSNIA1078GB

H
Serial communication circuits between AV control unit and front display unit.

J
When either one of the following items are detected: satellite radio tuner power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and satellite radio tuner are malfunctioning. serial communication or request signal between AV control unit and satellite radio tuner is malfunctioning. request signal circuit between AV control unit and satellite radio tuner is malfunctioning.

K
Satellite radio tuner power supply and ground circuits. Serial communication circuits between AV control unit and satellite radio tuner. Request signal circuit between AV control unit and satellite radio tuner.

JSNIA1079GB

AV

Revision: 2009 September

AV-77

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis results

[BOSE AUDIO WITHOUT NAVIGATION]


Detection logic When either one of the following items are detected: TEL adapter unit power supply and ground circuits are malfunctioning. AV communication circuits between camera control unit and TEL adapter unit are malfunctioning. AV communication circuits between multifunction switch and camera control unit are malfunctioning. (without DVD player models) AV communication circuits between DVD player and camera control unit are malfunctioning. (with DVD player models) AV communication circuits between camera control unit and TEL adapter unit is malfunctioning. AV communication signal between AV control unit and TEL adapter unit is malfunctioning. Possible malfunction location / Action to take

JSNIA1080GB

TEL adapter unit power supply and ground circuits. AV communication circuits between camera control unit and TEL adapter unit. AV communication circuits between multifunction switch and camera control unit. (without DVD player models) AV communication circuits between DVD player and camera control unit. (with DVD player models) AV communication circuits between camera control unit and TEL adapter unit. AV communication circuits between multifunction switch and TEL adapter unit. (without rear view camera)

Malfunction is detected in camera-connection recognition signal circuit.

Camera connection recognition signal circuit.

JSNIA1081GB

When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning.
JSNIA1082GB

iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch and iPod adapter.

When either one of the following items are detected: DVD player power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and DVD player is malfunctioning.

DVD player power supply and ground circuits.

JSNIA1083GB

Revision: 2009 September

AV-78

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis results

[BOSE AUDIO WITHOUT NAVIGATION]


Detection logic Possible malfunction location / Action to take

When either one of the following items are detected: rear display unit power supply and ground circuits are malfunctioning. serial communication circuits between video distributor and rear display unit are malfunctioning. serial communication signal between video distributor and rear display unit is malfunctioning.
JSNIA1084GB

B
Rear display unit power supply and ground circuits. Serial communication circuits between video distributor and rear display unit.

E
When either one of the following items are detected: Malfunction is detected in video distributor power supply and ground circuits. AV communication signal between AV control unit and video distributor is malfunctioning.
JSNIA1085GB

F
Video distributor power supply and ground circuits.

I
Malfunction is detected in AV communication circuits between video distributor and DVD player. AV communication circuits between video distributor and DVD player malfunction.

K
JSNIA1086GB

AV

Revision: 2009 September

AV-79

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis results

[BOSE AUDIO WITHOUT NAVIGATION]


Detection logic Possible malfunction location / Action to take

Malfunction is detected in AV communication circuits between multifunction switch and video distributor.

AV communication circuits between multifunction switch and video distributor.

JSNIA1087GB

Malfunction is detected in AV communication circuits between multifunction switch and iPod adapter.

AV communication circuits between multifunction switch and iPod adapter.

JSNIA1174GB

NOTE: The number of units that is displayed on the on board self-diagnosis display according to equipment.

CONFIRMATION/ADJUSTMENT MODE
1. 2. Start the diagnosis function and select Confirmation/Adjustment. The confirmation/adjustment mode indicates where each item can be checked or adjusted. Select each switch on the Confirmation/Adjustment Mode screen to display the relevant trouble diagnosis screen. Press the RETURN switch to return to the initial Confirmation/Adjustment Mode screen.

JSNIA0147GB

Revision: 2009 September

AV-80

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Display Diagnosis A

[BOSE AUDIO WITHOUT NAVIGATION]

JSNIA0688GB

The tint of the color bar indication is as per the following list if RGB image signal error is detected.
G

R (red) signal error G (green) signal error B (blue) signal error

: Light blue (Cyan) tint : Purple (Magenta) tint : Yellow tint

Vehicle Signals A comparison check can be made of each actual vehicle signal and the signals recognized by the system.

JSNIA0149GB

Diagnosis item Vehicle speed

Display ON OFF ON OFF ON OFF ON OFF ON

Vehicle status Vehicle speed > 0 km/h (0 MPH) Vehicle speed = 0 km/h (0 MPH) Parking brake is applied. Parking brake is released. Light switch ON Light switch OFF Ignition switch ON Ignition switch in the ACC position Shift the selector lever to the R position Shift the selector lever to a position other than the R position

Remarks

Changes in indication may be delayed. This is normal.

AV

Parking brake

Lights

Ignition

P
Changes in indication may be delayed. This is normal.

Reverse OFF

Speaker Test

Revision: 2009 September

AV-81

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > Select SPEAKER DIAGNOSIS to display the Speaker Diagnosis screen. Press START and NEXT to generate a test tone in a speaker. Press Start to generate a test tone in the next speaker. Press End to stop the test tones. NOTE: The frequency of test tone emitted from each speaker is as follows.
Tweeter Front speaker Rear speaker : 3 kHz : 300 Hz : 1 kHz
JSNIA0150GB

Climate Control On-board self-diagnosis is not supported. Only CONSULT-III is supported. Refer to HAC-39, "CONSULT-III Function" [without 7 inch display]. Refer to HAC-161, "CONSULT-III Function" [with 7 inch display]. Error History The self-diagnosis results are judged depending on whether any error occurs from when Self-diagnosis is selected until the self-diagnosis results are displayed. However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned ON and then no error has occurred until the self-diagnosis start. Check the Error Record to detect any error that may have occurred before the self-diagnosis start because of this situation. Count up method A The counter resets to 0 if an error occurs when IGN switch is turned ON. The counter increases by 1 if the condition is normal at the next IGN ON cycle. The counter upper limit is 39. Any counts exceeding 39 are ignored. The counter can be reset (no error record display) with the Delete log switch or CONSULT-III. Count up method B The counter increases by 1 if an error occurs when IGN switch is ON. The counter will not decrease even if the condition is normal at the next IGN ON cycle. The counter upper limit is 50. Any counts exceeding 50 are ignored. The counter can be reset (no error record display) with the Delete log switch or CONSULT-III.
Display type of occurrence frequency Count up method A Count up method B Error history display item CAN communication line, control unit (CAN), AV communication line, control unit (AV communication) Other than the above

JSNIA0151GB

Error Item Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items
Revision: 2009 September

AV-82

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item Description

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction factor/Action to take Perform diagnosis with CONSULT-III, and then repair the malfunctioning parts according to the diagnosis results. Refer to AV-87, "CONSULT-III Function (MULTI AV)".

CAN COMM CIRCUIT

CAN communication malfunction is detected.

CONTROL UNIT (CAN) CONTROL UNIT (AV) FLASH-ROM Error Of Control Unit CAN Controller Memory Error

CAN initial diagnosis malfunction is detected. AV communication circuit initial diagnosis malfunction is detected. AV control unit malfunction is detected. When either one of the following items are detected: front display unit power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning. When either one of the following items are detected: rear display unit power supply and ground circuits are malfunctioning. serial communication circuits between video distributor and rear display unit are malfunctioning. serial communication signal between video distributor and rear display unit is malfunctioning. Malfunction is detected in camera connection recognition circuit between AV control unit and camera control unit. When either one of the following items are detected: satellite radio tuner power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and satellite radio tuner are malfunctioning. serial communication or request signal between AV control unit and satellite radio tuner is malfunctioning. request signal circuit between AV control unit and satellite radio tuner is malfunctioning. When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning. AV communication signal between AV control unit and multifunction switch is malfunctioning. Replace the AV control unit.

E
Front display unit power supply and ground circuits. Serial communication circuits between AV control unit and front display unit.

Front Display Connection Error

H
Rear display unit power supply and ground circuits. Serial communication circuits between video distributor and rear display unit.

Rear Display Connection Error

J
Camera-connection recognition circuit between AV control unit and camera control unit.

Camera Control Unit Connection Error

L
Satellite radio tuner power supply and ground circuits. Serial communication circuits between AV control unit and satellite radio tuner. Request signal circuit between AV control unit and satellite radio tuner.

SAT Connection Error

AV

O
Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.

AV COMM CIRCUIT Switches Connection Error

Revision: 2009 September

AV-83

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item Description When either one of the following items are detected: video distributor power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and video distributor is malfunctioning. When either one of the following items are detected: DVD player power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and DVD player is malfunctioning. When either one of the following items are detected: camera control unit power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and camera control unit is malfunctioning. AV communication circuits between multifunction switch and camera control unit are malfunctioning. (Without DVD entertainment system models) When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning. When either one of the following items are detected: TEL adapter unit power supply and ground circuits are malfunctioning. AV communication circuits between camera control unit and TEL adapter unit are malfunctioning. AV communication signal between AV control unit and TEL adapter unit is malfunctioning. When either one of the following items are detected: AV communication circuits between multifunction switch and camera control unit are malfunctioning. (without DVD player models) AV communication circuits between DVD player and camera control unit are malfunctioning. (with DVD player models) Malfunction is detected in AV communication circuits between video distributor and DVD player.

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction factor/Action to take

AV COMM CIRCUIT Video Distributor Connection Error

Video distributor power supply and ground circuits.

AV COMM CIRCUIT DVD Deck Connection Error

DVD player power supply and ground circuits.

AV COMM CIRCUIT Rearview Camera Connection Error

Camera control unit power supply and ground circuits. AV communication circuits between multifunction switch and camera control unit. (Without DVD entertainment system models)

AV COMM CIRCUIT iPod Connection Error

iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch and iPod adapter.

AV COMM CIRCUIT H/F Unit Connection Error

TEL adapter unit power supply and ground circuits. AV communication circuits between camera control unit and TEL adapter unit.

AV COMM CIRCUIT Rearview Camera Connection Error H/F Unit Connection Error*

AV communication circuits between multifunction switch and camera control unit. (without DVD player models) AV communication circuits between DVD player and camera control unit. (with DVD player models)

AV COMM CIRCUIT DVD Deck Connection Error Rearview Camera Connection Error H/F Unit Connection Error

AV communication circuits between video distributor and DVD player.

Revision: 2009 September

AV-84

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item AV COMM CIRCUIT Video Distributor Connection Error DVD Deck Connection Error Rearview Camera Connection Error H/F Unit Connection Error AV COMM CIRCUIT Video Distributor Connection Error DVD Deck Connection Error Rearview Camera Connection Error iPod Connection Error H/F Unit Connection Error Description Malfunction is detected in AV communication circuits between multifunction switch and video distributor.

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction factor/Action to take

A
AV communication circuits between multifunction switch and video distributor.

Malfunction is detected in AV communication circuits between multifunction switch and iPod adapter.

AV communication circuits between multifunction switch and iPod adapter.

AV COMM CIRCUIT Switches Connection Error Rearview Camera Connection Error iPod Connection Error* H/F Unit Connection Error* AV COMM CIRCUIT Switches Connection Error Video Distributor Connection Error DVD Deck Connection Error Rearview Camera Connection Error iPod Connection Error H/F Unit Connection Error

When either one of the following items are detected: AV communication circuits between AV control unit and the branch point multifunction switch and AV control unit are malfunctioning. AV communication circuits are malfunctioning.

E
AV communication circuits between AV control unit and the branch point multifunction switch and AV control unit. Check and repair the short circuit in AV communication circuits.

*: Non-equipped item is not displayed.

Camera Cont. The two functions of Connection Confirmation and Adjust Offset of Rear View Camera are available. CONNECTION CONFIRMATION The steering angle sensor, reverse signal and vehicle speed sensor can be inspected.

L
JSNIA1088GB

Diagnosis item

Display ON

Vehicle status When steering the vehicle with ignition switch ON (remains ON until connection mode is stopped when it is turned ON). Ignition switch at ACC. No steering with ignition switch ON. Malfunction detected in camera connection recognition signal. Selector lever is in R with ignition switch ON. Ignition switch at ACC. Selector lever is in position other than R with ignition switch ON. Malfunction detected in camera-connection recognition signal. Vehicle speed is more than 0 km/h (0 MPH) with ignition switch ON. Ignition switch at ACC. Vehicle speed is 0 km/h (0 MPH) with ignition switch ON. Malfunction detected in camera connection recognition signal. Not used.

AV

Steer. Angle Sensor

OFF ON

Reverse Sensor

OFF ON

Vehicle Speed Sensor

OFF

Side view Switch

Revision: 2009 September

AV-85

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > ADJUST OFFSET OF REAR VIEW CAMERA Use this mode to adjust the guide line display position of the rearview monitor if necessary after removing the rear view monitor camera.

JSNIA0085GB

Vehicle CAN Diagnosis CAN communication status and error counter is displayed. The error counter displays OK if any malfunction was not detected in the past and displays 0 if a malfunction is detected. It increases by 1 if the status is normal at the next ignition switch ON cycle. The upper limit of the counter is 39. The error counter is erased if reset.
Malfunction counter (Past) OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39
JSNIA0080GB

Items Tx (HVAC) Rx (ECM) Rx (Cluster) Rx (BCM) Rx (HVAC) Rx (USM)

Display (Current) OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN

AV COMM Diagnosis Displays the communication status between AV control unit (master unit) and each unit. The error counter displays OK if any malfunction was not detected in the past and displays 0 if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39. If it resets, the error counter is erased.
Status (Current) OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN Counter (Past) OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39 OK / 0 - 39
JSNIA1089GB

Items C Tx(ITM-SW) C Rx(PrimarySW-ITM) C Rx(RearCamera-ITM) C Rx(DVD-ITM) C Rx(Video Dist-ITM) C Rx(Remote Cont-ITM) C Rx(BTHFITM) C Rx(iPod Adpt.ITM) C Rx(DVDAudio-ITM)

Delete Unit Connection Log

Revision: 2009 September

AV-86

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITHOUT NAVIGATION] < SYSTEM DESCRIPTION > Deletes any unit connection records and error records from the AV control unit memory. (Clear the records of the unit that has been removed)

C
JSNIA0154GB

Initialize Settings Initializes the AV control unit memory.

G
JSNIA0155GB

CONSULT-III Function (MULTI AV)


CONSULT-III functions
CONSULT-III performs the following functions via communication with the AV control unit.
Diagnosis mode Ecu Identification Self Diagnostic Result Data Monitor Description The part number of AV control unit can be checked.

INFOID:0000000005528478

Performs a diagnosis on the AV control unit. A connection diagnosis for the communication circuit of the MULTI AV system and displays the current and past malfunctions collectively. The diagnosis of vehicle signal that is input to the AV control unit can be performed.

AV COMMUNICATION
When AV communication of CAN Diag Support Monitor is selected, the following function will be performed.
AV&NAVI C/U AUDIO Displays the communication status from AV control unit to each unit as well as the error counter. Displays the AV control unit communication status and the error counter.

AV communication

ECU IDENTIFICATION
The part number of AV control unit is displayed.
AV

SELF DIAGNOSIS RESULT


In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed collectively. The current malfunction indicates CRNT. The past malfunction indicates PAST. The timing is displayed as 0 if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected. The counter increases by 1 if the condition is normal at the next ignition switch ON cycle.
Self-diagnosis Results Display Item
Error item CAN COMM CIRCUIT [U1000] Description CAN communication malfunction is detected. Possible malfunction factor/Action to take Refer to AV-93, "Description".

Revision: 2009 September

AV-87

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item CONTROL UNIT (CAN) [U1010] CONTROL UNIT (AV) [U1310] Cont Unit FLASH-ROM [U1200] CAN CONT [U1216] Description CAN initial diagnosis malfunction is detected. AV communication circuit initial diagnosis malfunction is detected. AV control unit malfunction is detected. When either one of the following items are detected: front display unit power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning. When either one of the following items are detected: rear display unit power supply and ground circuits are malfunctioning. serial communication circuits between video distributor and rear display unit are malfunctioning. serial communication signal between video distributor and rear display unit is malfunctioning. Malfunction is detected in camera connection recognition circuit between AV control unit and camera control unit. When either one of the following items are detected: satellite radio tuner power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and satellite radio tuner are malfunctioning. serial communication or request signal between AV control unit and satellite radio tuner is malfunctioning. request signal circuit between AV control unit and satellite radio tuner is malfunctioning. When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning. AV communication signal between AV control unit and multifunction switch is malfunctioning. When either one of the following items are detected: video distributor power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and video distributor is malfunctioning. Replace the AV control unit

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction factor/Action to take

FRONT DISP CONN [U1243]

Front display unit power supply and ground circuits. Serial communication circuits between AV control unit and front display unit.

REAR DISP CONN [U1247]

Rear display unit power supply and ground circuits. Serial communication circuits between video distributor and rear display unit.

CAMERA CONT CONN [U1250]

Camera-connection recognition circuit between AV control unit and camera control unit.

SAT CONN [U1255]

Satellite radio tuner power supply and ground circuits. Serial communication circuits between AV control unit and satellite radio tuner. Request signal circuit between AV control unit and satellite radio tuner.

AV COMM CIRCUIT [U1300] SWITCH CONN [U1240]

Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.

AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246]

Video distributor power supply and ground circuits.

Revision: 2009 September

AV-88

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item Description When either one of the following items are detected: DVD player power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and DVD player is malfunctioning. When either one of the following items are detected: camera control unit power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and camera control unit is malfunctioning. AV communication circuits between multifunction switch and camera control unit is malfunctioning. (Without DVD entertainment system models) When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning. When either one of the following items are detected: TEL adapter unit power supply and ground circuits are malfunctioning. AV communication circuits between camera control unit and TEL adapter unit are malfunctioning. AV communication signal between AV control unit and TEL adapter unit is malfunctioning. When either one of the following items are detected: AV communication circuits between multifunction switch and camera control unit are malfunctioning. (without DVD player models) AV communication circuits between DVD player and camera control unit are malfunctioning. (with DVD player models) Malfunction is detected in AV communication circuits between video distributor and DVD player.

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction factor/Action to take

A
DVD player power supply and ground circuits.

AV COMM CIRCUIT [U1300] DVD DECK CONN [U1248]

C
Camera control unit power supply and ground circuits. AV communication circuits between multifunction switch and camera control unit. (Without DVD entertainment system models)

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252]

AV COMM CIRCUIT [U1300] IPod CONN [U1254]

iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch unit and iPod adapter.

I
TEL adapter unit power supply and ground circuits. AV communication circuits between camera control unit and TEL adapter unit. AV communication circuits between multifunction switch and TEL adapter unit. (without rear view camera models)

AV COMM CIRCUIT [U1300] HAND FREE CONN [U1256]

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256]*

AV communication circuits between multifunction switch and camera control unit. (without DVD player models) AV communication circuits between DVD player and camera control unit. (with DVD player models)

AV COMM CIRCUIT [U1300] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256]

AV
AV communication circuits between video distributor and DVD player.

Malfunction is detected in AV communication circuits between multifunction switch and iPod adapter.

AV communication circuits between multifunction switch and iPod adapter.

Malfunction is detected in AV communication circuits between multifunction switch and video distributor.

AV communication circuits between multifunction switch and video distributor.

Revision: 2009 September

AV-89

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] IPod CONN [U1254]* HAND FREE CONN [U1256]* AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254] HAND FREE CONN [U1256] When either one of the following items are detected: AV communication circuits between AV control unit and the branch point multifunction switch. AV communication circuits are malfunctioning. AV communication circuits between AV control unit and the branch point multifunction switch. Check and repair the short circuit in AV communication circuits. Description

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction factor/Action to take

NOTE: *: Non-equipped item is not displayed.

DATA MONITOR
ALL SIGNALS Displays the status of the following vehicle signals inputted into the AV control unit. For each signal, the actual signal can be compared the condition recognized on the system.

Display Item VHCL SPD SIG

Display On Off On Off On Off On Off On

Vehicle status Vehicle speed >0 km/h (0 MPH) Vehicle speed =0 km/h (0 MPH) Parking brake is applied. Parking brake is released. Light switch ON Light switch OFF Ignition switch ON Ignition switch in ACC position Shift the selector lever to the R position Shift the selector lever other than the R position

Remarks

Changes in indication may be delayed. This is normal.

PKB SIG

ILLUM SIG

IGN SIG

REV SIG Off

Changes in indication may be delayed. This is normal.

SELECTION FROM MENU Allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.
Item to be selected VHCL SPD SIG PKB SIG ILLUM SIG IGN SIG REV SIG The same as when ALL SIGNALS is selected. Description

Revision: 2009 September

AV-90

2010 Murano

DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)


< SYSTEM DESCRIPTION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528479

DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)


Diagnosis Description
HANDS-FREE PHONE SYSTEM ON BOARD DIAGNOSIS
During on board diagnosis the diagnosis function of TEL adapter unit starts with the operation of the steering switch and performs the diagnosis when ignition switch ACC.

On board diagnosis item


The on board diagnosis has 3 modes: the self-diagnosis mode that performs the trouble diagnosis, the speaker adaptation data deleting mode and the hands-free phone system initialization mode. CAUTION: Perform the diagnosis with the vehicle stopped. Perform STEP2 if necessary.
STEP MODE Description The self-diagnosis mode performs the microphone test. The self-diagnosis mode also diagnoses TEL adapter unit, TEL antenna and steering switch. Those results are indicated with voice guidance and displayed on the screen. The speaker adaptation data deleting mode can delete the speaker adaptation data. Hands-free phone system initialization mode can perform the initialization of hands-free phone system.

STEP1

Self-diagnosis

Speaker adaptation data deleting STEP2 Hands-free phone system initialization

Self-diagnosis results
Self-diagnosis mode reads out the self-diagnosis results and indicates DTC on the display. NOTE: Error count is read out simultaneously when reading out the DTC name. The errors are read out continuously when some errors occur at the same time. The DTC displays are combined and displayed. For example, DTC 01100 is displayed when DTC 01000 and DTC 00100 are indicated at the same time.
Self-diagnosis results

DTC DTC 10000 DTC 01000 DTC 00100 DTC 00010 DTC 00001 DTC 00000 INTERNAL FAILURE

DTC name

Possible causes TEL adapter unit TEL antenna

ANT. SHORT TO BATT OR OPEN ANT. SHORT TO GROUND STEERING REMOTE BUTTON STUCK A STEERING REMOTE BUTTON STUCK B THERE ARE NO FAILURE RECORDS TO REPORT

Steering switch

The details of error count The error count guides 0 when the error occurs. The next time it counts up 1 if it is normal with the ignition AV switch ON. It continues the count up unless the initialization of hands-free phone system is performed. O

Revision: 2009 September

AV-91

2010 Murano

DIAGNOSIS SYSTEM (TEL ADAPTER UNIT)


< SYSTEM DESCRIPTION > FLOW CHART OF TROUBLE DIAGNOSIS [BOSE AUDIO WITHOUT NAVIGATION]

JSNIA1181GB

Revision: 2009 September

AV-92

2010 Murano

U1000 CAN COMM CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000005528480

CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independently). In CAN communication, control units are connected with 2 communication lines (CAN-H, CAN-L) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to LAN-27, "CAN Communication Signal Chart".

DTC Logic
DTC DETECTION LOGIC
DTC Display contents of CONSULT-III CAN COMM CIRCUIT Diagnostic item is detected when... AV control unit is not transmitting or receiving CAN communication signal for 2 seconds or more.

INFOID:0000000005528481

Probable malfunction location

U1000

CAN communication system.

Diagnosis Procedure

INFOID:0000000005528482

1.PERFORM SELF-DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 seconds or more. 2. Check Self Diagnostic Result of MULTI AV. Is CAN COMM CIRCUIT displayed? YES >> Refer to LAN system. Refer to LAN-17, "Trouble Diagnosis Flow Chart". NO >> Refer to GI section. Refer to GI-39, "Intermittent Incident".
I

AV

Revision: 2009 September

AV-93

2010 Murano

U1010 CONTROL UNIT (CAN)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

U1010 CONTROL UNIT (CAN)


Description
Initial diagnosis of AV control unit.
INFOID:0000000005528483

DTC Logic
DTC DETECTION LOGIC
DTC U1010 Display contents of CONSULT-III CONTROL UNIT (CAN) Diagnostic item is detected when... CAN initial diagnosis malfunction is detected.

INFOID:0000000005528484

Probable malfunction location AV control unit.


INFOID:0000000005528485

Diagnosis Procedure

1.REPLACE AV CONTROL UNIT


When DTC U1010 is detected, replace AV control unit. >> INSPECTION END

Revision: 2009 September

AV-94

2010 Murano

U1310 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528486

U1310 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-534, "Exploded View".
Part name Description It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. AV control unit includes audio function and vehicle information function. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). The camera image signal is input from the camera control unit. The AV control unit outputs camera image signal to the front display unit. BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Power (signal VCC and inverter VCC) is transmitted to front display. Without DVD entertainment system Auxiliary image and auxiliary sound signals are input from the auxiliary input jacks. With DVD entertainment system Composite image signal (auxiliary and DVD images) is input from the video distributor. Sound signal (DVD and auxiliary sounds) is input from the DVD player.
INFOID:0000000005528487

AV CONTROL UNIT

DTC Logic
DTC U1310 Display contents of CONSULT-III CONTROL UNIT (AV) [U1310] DTC Detection Condition An initial diagnosis error is detected in AV communication circuit.

J
Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-95

2010 Murano

U1200 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

U1200 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-534, "Exploded View".
Part name Description It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. AV control unit includes audio function and vehicle information function. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). The camera image signal is input from the camera control unit. The AV control unit outputs camera image signal to the front display unit. BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Power (signal VCC and inverter VCC) is transmitted to front display. Without DVD entertainment system Auxiliary image and auxiliary sound signals are input from the auxiliary input jacks. With DVD entertainment system Composite image signal (auxiliary and DVD images) is input from the video distributor. Sound signal (DVD and auxiliary sounds) is input from the DVD player.
INFOID:0000000005528489 INFOID:0000000005528488

AV CONTROL UNIT

DTC Logic
DTC Display contents of CONSULT-III Cont Unit FLASH- ROM [U1200] DTC Detection Condition An internal malfunction is detected in AV control unit (FLASH-ROM).

Action to take

U1200

Replace AV control unit.

Revision: 2009 September

AV-96

2010 Murano

U1216 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528490

U1216 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-534, "Exploded View".
Part name Description It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. AV control unit includes audio function and vehicle information function. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). The camera image signal is input from the camera control unit. The AV control unit outputs camera image signal to the front display unit. BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Power (signal VCC and inverter VCC) is transmitted to front display. Without DVD entertainment system Auxiliary image and auxiliary sound signals are input from the auxiliary input jacks. With DVD entertainment system Composite image signal (auxiliary and DVD images) is input from the video distributor. Sound signal (DVD and auxiliary sounds) is input from the DVD player.
INFOID:0000000005528491

AV CONTROL UNIT

DTC Logic
DTC U1216 Display contents of CONSULT-III CAN CONT [U1216] DTC Detection Condition Internal malfunction of AV control unit (CAN controller) is detected.

J
Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-97

2010 Murano

U1243 DISPLAY UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

U1243 DISPLAY UNIT


Description
Part name Description Front display image is controlled by the serial communication from AV control unit. It receives the power (signal VCC and inverter VCC) from the AV control unit and operates. RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Synchronizing signal (HP, VP) is output to AV control unit. Camera image signal is input from AV control unit. Without DVD entertainment system Auxiliary image signal is input from AV control unit. With DVD entertainment system Composite image signal (auxiliary and DVD images) is input from the AV control unit.
INFOID:0000000005528493 INFOID:0000000005528492

FRONT DISPLAY UNIT

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition When either one of the following items are detected: front display unit power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning.

Possible causes

U1243

FRONT DISP CONN [U1243]

Front display unit power supply and ground circuits. Serial communication circuits between AV control unit and front display unit.

Diagnosis Procedure

INFOID:0000000005528494

1.CHECK DISPLAY UNIT POWER SUPPLY AND GROUND CIRCUIT


Check front display unit power supply and ground circuit. Refer to AV-107, "FRONT DISPLAY UNIT : Diagnosis Procedure". Is the inspection result normal? YES >> GO TO 2. NO >> Repair malfunctioning parts.

2.CHECK CONTINUITY COMMUNICATION CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminals 11 22 AV control unit Connector M129 Terminals 56 44

Continuity

Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminals 11 22 Ground Not existed

Continuity

Revision: 2009 September

AV-98

2010 Murano

U1243 DISPLAY UNIT


< DTC/CIRCUIT DIAGNOSIS > Is the inspection result normal? YES >> GO TO 3. NO >> Repair harness or connector. [BOSE AUDIO WITHOUT NAVIGATION]
A

3.CHECK COMMUNICATION SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

E
M49 11 Ground When adjusting display bright ness.

F
PKIB5039J

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK COMMUNICATION SIGNAL


Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

K
M49 22 Ground When adjusting display bright ness.

L
PKIB5039J

Is the inspection result normal? YES >> INSPECTION END NO >> Replace front display unit.

AV

Revision: 2009 September

AV-99

2010 Murano

U1247 REAR DISP CONN


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

U1247 REAR DISP CONN


Description
Part name Description The rear display unit has functions of remote control receiver and headphone amp. Transmits the headphone sound signal when receiving headphone ON signal from the video distributor. Headphone sound signal is input from DVD player via hard wires and outputs the signal to headphones via infrared wireless communication. Receives the operation signal from the remote controller and transmits the signal to the video distributor via serial communication. Rear display image is controlled by the serial communication from video distributor. RGB image signal is input from video distributor (RGB image and RGB area). Composite image signal (DVD and auxiliary images) is input from the video distributor. Synchronize signal (HP, VP) is output to video distributor.
INFOID:0000000005528496 INFOID:0000000005528495

REAR DISPLAY UNIT

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition When either one of the following items are detected: rear display unit power supply and ground circuits are malfunctioning. serial communication circuits between video distributor and rear display unit are malfunctioning. serial communication signal between video distributor and rear display unit is malfunctioning.

Possible causes

U1247

REAR DISP CONN [U1247]

Rear display unit power supply and ground circuits. Serial communication circuits between video distributor and rear display unit.

Diagnosis Procedure

INFOID:0000000005528497

1.CHECK REAR DISPLAY UNIT POWER SUPPLY AND GROUND CIRCUIT


Check rear display unit power supply and ground circuits. Refer to AV-108, "REAR DISPLAY UNIT : Diagnosis Procedure". Is the inspection result normal? YES >> GO TO 2. NO >> Repair malfunctioning parts.

2.CHECK CONTINUITY SERIAL COMMUNICATION CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminals 9 10 Video distributor Connector M257 Terminals 39 40

Continuity

Existed

4.

Check continuity between rear display unit harness connector and ground.

Revision: 2009 September

AV-100

2010 Murano

U1247 REAR DISP CONN


< DTC/CIRCUIT DIAGNOSIS >
Rear display unit Connector R152 Terminals 9 10 Ground Not existed

[BOSE AUDIO WITHOUT NAVIGATION]


A
Continuity

Is the inspection result normal? YES >> GO TO 3. NO >> Repair harness or connector.

3.CHECK SERIAL COMMUNICATION SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

G
R152 9 Ground Rear seat remote controller operation.

H
PKIB5039J

Is the inspection result normal? YES >> GO TO 4. NO >> Replace rear display unit.

4.CHECK SERIAL COMMUNICATION SIGNAL


Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M
R152 10 Ground Rear seat remote controller operation.

AV
PKIB5039J

Is the inspection result normal? YES >> INSPECTION END NO >> Replace video distributor.

Revision: 2009 September

AV-101

2010 Murano

U1250 CAMERA CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

U1250 CAMERA CONTROL UNIT


Description
Part name Description Camera image signal is input from rear view camera. Camera image signal output to AV control unit. Power (camera ON signal) is transmitted to rear view camera. AV control unit recognizes the presence of camera system with camera connection recognition signal. Camera control unit is connected via AV communication.
INFOID:0000000005528499 INFOID:0000000005528498

CAMERA CONTROL UNIT

DTC Logic
DTC U1250 Display contents of CONSULT-III CAMERA CONT. CONN [U1250] DTC Detection Condition Malfunction is detected in camera-connection recognition signal circuit.

Possible causes Camera-connection recognition signal circuit.


INFOID:0000000005528500

Diagnosis Procedure

1.CHECK CAMERA-CONNECTION RECOGNITION SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect AV control unit connector and camera control unit connector. Check continuity between AV control unit harness connector and camera control unit harness connector.
AV control unit Connector M130 Terminal 68 Camera control unit Connector B60 Terminal 14

Continuity Existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector. Turn ignition switch ON. Check voltage between AV control unit harness connector and ground.
(+) AV control unit Connector M130 Terminal 68 Ground 5.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> Replace camera control unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-102

2010 Murano

U1255 SATELLITE RADIO TUNER


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528501

U1255 SATELLITE RADIO TUNER


Description
Part name Description Inputs the satellite radio signal from satellite radio antenna and outputs the sound signal to the AV control unit. It is controlled with the AV control unit and serial communication (communication signal and request signal).
INFOID:0000000005528502

SATELLITE RADIO TUNER

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition When either one of the following items are detected: satellite radio tuner power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and satellite radio tuner are malfunctioning. serial communication or request signal between AV control unit and satellite radio tuner is malfunctioning. request signal circuit between AV control unit and satellite radio tuner is malfunctioning.

Possible causes Satellite radio tuner power supply and ground circuits. Serial communication circuits between AV control unit and satellite radio tuner. Request signal circuit between AV control unit and satellite radio tuner.

U1255

SAT CONN [U1255]

Diagnosis Procedure

H
INFOID:0000000005528503

1.CHECK SATELLITE RADIO TUNER POWER SUPPLY AND GROUND CIRCUIT


Check satellite radio tuner power supply and ground circuit. Refer to AV-113, "SATELLITE RADIO TUNER : Diagnosis Procedure". Is the inspection result normal? YES >> GO TO 2. NO >> Repair malfunctioning parts.

2.CHECK CONTINUITY COMMUNICATION CIRCUIT AND REQUEST SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect AV control unit connector and satellite radio tuner connector. Check continuity between AV control unit harness connector terminals and satellite radio tuner harness connector terminals.
AV control unit Connector Terminals 28 M128 29 30 B48 Satellite radio tuner Connector Terminals 8 9 10 Existed

M
Continuity

AV

4.

Check continuity between AV control unit harness connector terminals and ground.
AV control unit Connector Terminals 28 M128 29 30 Ground Not existed

Continuity

Is the inspection result normal? YES >> GO TO 3.


Revision: 2009 September

AV-103

2010 Murano

U1255 SATELLITE RADIO TUNER


< DTC/CIRCUIT DIAGNOSIS > NO >> Repair harness or connector. [BOSE AUDIO WITHOUT NAVIGATION]

3.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector. Turn ignition switch ON. Check voltage between AV control unit harness connector terminal and ground.
(+) AV control unit Connector M128 Terminals 28 29 Ground 7.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK SATELLITE RADIO TUNER


1. 2. 3. 4. 5. Turn ignition switch OFF. Disconnect AV control unit connector. Connect satellite radio tuner. Turn ignition switch ON. Check voltage between satellite radio tuner harness connector terminal ground.
(+) Satellite radio tuner Connector B48 Terminal 10 Ground 7.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> INSPECTION END NO >> Replace satellite radio tuner.

Revision: 2009 September

AV-104

2010 Murano

U1300 AV COMM CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528504

U1300 AV COMM CIRCUIT


Description
U1300 is indicated when malfunction occurs in communication signal of multi AV system. Indicated simultaneously, without fail, with the malfunction of control units connected to AV control unit with communication line. Determine the possible malfunction cause from the table below.

SELF-DIAGNOSIS RESULTS DISPLAY ITEM


DTC Display contents of CONSULT-III DTC Detection Condition When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning. AV communication signal between AV control unit and multifunction switch is malfunctioning. When either one of the following items are detected: video distributor power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and video distributor is malfunctioning. When either one of the following items are detected: DVD player power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and DVD player is malfunctioning. When either one of the following items are detected: camera control unit power supply and ground circuits are malfunctioning. AV communication signal between AV control unit and camera control unit is malfunctioning. AV communication circuits between multifunction and camera control unit is malfunctioning. (Without DVD entertainment system models) When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning. When either one of the following items are detected: TEL adapter unit power supply and ground circuits are malfunctioning. AV communication circuits between camera control unit and TEL adapter unit are malfunctioning. AV communication signal between AV control unit and TEL adapter unit is malfunctioning. Possible causes

D
Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.

U1300 U1240

AV COMM CIRCUIT [U1300] SWITCH CONN [U1240]

F
Video distributor power supply and ground circuits.

U1300 U1246

AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] AV COMM CIRCUIT [U1300] DVD DECK CONN [U1248]

U1300 U1248

DVD player power supply and ground circuits.

I
Camera control unit power supply and ground circuits. AV communication circuits between multifunction and camera control unit. (Without DVD entertainment system models)

U1300 U1252

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252]

K
iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch unit and iPod adapter. TEL adapter unit power supply and ground circuits. AV communication circuits between camera control unit and TEL adapter unit. AV communication circuits between multifunction switch and TEL adapter unit. (without rear view camera models) AV communication circuits between multifunction switch and camera control unit. (without DVD player models) AV communication circuits between DVD player and camera control unit. (with DVD player models)

U1300 U1254

AV COMM CIRCUIT [U1300] IPod CONN [U1254]

U1300 U1256

AV COMM CIRCUIT [U1300] HAND FREE CONN [U1256]

AV

U1300 U1252 U1256*

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256]*

When either one of the following items are detected: AV communication circuits between multifunction switch and camera control unit are malfunctioning. (without DVD player models) AV communication circuits between DVD player and camera control unit are malfunctioning. (with DVD player models)

Revision: 2009 September

AV-105

2010 Murano

U1300 AV COMM CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
DTC Display contents of CONSULT-III AV COMM CIRCUIT [U1300] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] IPod CONN [U1254]* HAND FREE CONN [U1256]* AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254] HAND FREE CONN [U1256] When either one of the following items are detected: AV communication circuits between AV control unit and the branch point multifunction switch. AV communication circuits are malfunctioning. AV communication circuits between AV control unit and the branch point multifunction switch. Check and repair the short circuit in AV communication circuits. DTC Detection Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Possible causes

U1300 U1248 U1252 U1256

Malfunction is detected in AV communication circuits between video distributor and DVD player.

AV communication circuits between video distributor and DVD player.

U1300 U1246 U1248 U1252 U1256

Malfunction is detected in AV communication circuits between multifunction switch and video distributor.

AV communication circuits between multifunction switch and video distributor.

U1300 U1246 U1248 U1252 U1254 U1256

Malfunction is detected in AV communication circuits between multifunction switch and iPod adapter.

AV communication circuits between multifunction switch and iPod adapter.

U1300 U1240 U1254* U1256*

U1300 U1240 U1246 U1248 U1252 U1254 U1256

NOTE: *: Non-equipped item is not displayed.

Revision: 2009 September

AV-106

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528505

POWER SUPPLY AND GROUND CIRCUIT


AV CONTROL UNIT
AV CONTROL UNIT : Diagnosis Procedure

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Ignition switch ON or START Fuse No. 35 19 3

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between AV control unit harness connectors and ground.
Signal name Battery power supply ACC power supply Ignition signal Connector No. M127 M131 Terminal No. 19 7 104 Ignition switch position OFF ACC ON Battery voltage Value (Approx.)

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between AV control unit and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect AV control unit connectors. Check continuity between AV control unit harness connectors and ground.
Signal name Ground Connector No. M127 M131 Terminal No. 20 85 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

FRONT DISPLAY UNIT


FRONT DISPLAY UNIT : Diagnosis Procedure
AV
INFOID:0000000005528506

1.CHECK POWER SUPPLY CIRCUIT (FRONT DISPLAY SIDE)


Check voltage between front display unit harness connector and ground.
Signal name Inverter VCC Signal VCC Connector No. M49 Terminal No. 2 3 Ignition switch position ACC Value (Approx.) 9.0 V

Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 2.

Revision: 2009 September

AV-107

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

2.CHECK POWER SUPPLY CIRCUIT (CONTINUITY)


1. 2. 3. Turn ignition switch OFF. Disconnect the harness connector between front display unit and AV control unit. Check continuity between front display unit harness connector M49 and AV control unit harness connector M129.
Signal name Inverter VCC Signal VCC Display unit (M49) 2 3 AV control unit (M129) 59 47 Continuity Existed Existed

4.

Check continuity between front display unit harness connector M49 and ground.
Signal name Inverter VCC Signal VCC Display unit (M49) 2 3 Ground Ground Continuity Not existed Not existed

Is the inspection result normal? YES >> GO TO 3. NO >> Repair harness or connector.

3.CHECK POWER SUPPLY CIRCUIT (AV CONTROL UNIT SIDE)


1. 2. 3. Connect the AV control unit harness connector. Turn ignition switch ACC. Check voltage between AV control unit harness connector and ground.
Signal name Inverter VCC Signal VCC Connector No. M129 Terminal No. 59 47 Ignition switch position ACC Value (Approx.) 9.0 V

Is the inspection result normal? YES >> INSPECTION END NO >> Replace AV control unit.

4.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector. Check continuity between front display unit harness connectors and ground.
Signal name Ground Connector No. M49 Terminal No. 1 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

REAR DISPLAY UNIT


REAR DISPLAY UNIT : Diagnosis Procedure
INFOID:0000000005528507

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2.


Revision: 2009 September

AV-108

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


[BOSE AUDIO WITHOUT NAVIGATION] < DTC/CIRCUIT DIAGNOSIS > NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between rear display unit harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. R152 R152 Terminal No. 3 4 6 Ignition switch position OFF ACC Value (Approx.)

Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between rear display unit and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector. Check continuity between rear display unit harness connector and ground.
Signal name Ground Connector No. R152 Terminal No. 1 2 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

VIDEO DISTRIBUTOR
VIDEO DISTRIBUTOR : Diagnosis Procedure
I
INFOID:0000000005528508

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Ignition switch ON or START Fuse No. 35 19 3

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between video distributor harness connector and ground.
Signal name Battery power supply ACC power supply Ignition signal M255 Connector No. Terminal No. 54 55 56 Ignition switch position OFF ACC ON Battery voltage Value (Approx.)

AV

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between video distributor and fuse.

3.CHECK GROUND CIRCUIT


1. 2. Turn ignition switch OFF. Disconnect video distributor connector.

Revision: 2009 September

AV-109

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


[BOSE AUDIO WITHOUT NAVIGATION] < DTC/CIRCUIT DIAGNOSIS > 3. Check continuity between video distributor harness connector and ground.
Signal name Connector No. M258 Ground M256 M255 Terminal No. 15 16 51 53 OFF Existed Ignition switch position Continuity

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

DVD PLAYER
DVD PLAYER : Diagnosis Procedure
INFOID:0000000005528509

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between DVD player harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. M254 Terminal No. 2 4 Ignition switch position OFF ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between DVD player and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect DVD player connector. Check continuity between DVD player harness connector and ground.
Signal name Ground Connector No. M254 Terminal No. 1 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

MULTIFUNCTION SWITCH
MULTIFUNCTION SWITCH : Diagnosis Procedure
INFOID:0000000005528510

1.CHECK FUSE
Check for blown fuses.

Revision: 2009 September

AV-110

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
Power source Ignition switch ACC or ON

[BOSE AUDIO WITHOUT NAVIGATION]


Fuse No. 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between multifunction switch harness connector and ground.
Signal name ACC power supply Connector No. M125 Terminal No. 3 Ignition switch position ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between multifunction switch and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect multifunction switch connector. Check continuity between multifunction switch harness connector and ground.
Signal name Ground Connector No. M125 Terminal No. 1 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

BOSE AMP.
BOSE AMP. : Diagnosis Procedure
INFOID:0000000005528511

1.CHECK FUSE
Check for blown fuses.
Power source Battery Fuse No. 23, 24

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between BOSE amp. harness connector and ground.
Signal name Battery power supply Connector No. B224 Terminal No. 10 11 Ignition switch position OFF Value (Approx.) Battery voltage

AV

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between BOSE amp. and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect BOSE amp. connector. Check continuity between BOSE amp. harness connector and ground.

Revision: 2009 September

AV-111

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
Signal name Ground Connector No. B224 Terminal No. 7 12

[BOSE AUDIO WITHOUT NAVIGATION]


Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

WOOFER
WOOFER : Diagnosis Procedure
INFOID:0000000005528512

1.CHECK FUSE
Check for blown fuses.
Power source Battery Fuse No. 25

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between woofer amp. harness connector and ground.
Signal name Battery power supply Connector No. B28 Terminal No. 6 Ignition switch position OFF Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between woofer amp. and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect woofer amp. connector. Check continuity between woofer amp. harness connector and ground.
Signal name Ground Connector No. B28 Terminal No. 5 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

iPod ADAPTER
iPod ADAPTER : Diagnosis Procedure
INFOID:0000000005528513

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

Revision: 2009 September

AV-112

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between iPod adapter harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. M148 Terminal No. 5 3 Ignition switch position OFF ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> INSPECTION END NO >> Check harness between iPod adapter and fuse.

SATELLITE RADIO TUNER


SATELLITE RADIO TUNER : Diagnosis Procedure
INFOID:0000000005528514

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between satellite radio tuner harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. B48 Terminal No. 12 16 Ignition switch position OFF ACC Value (Approx.)

J
Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between satellite radio tuner and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect satellite radio tuner. Check continuity between satellite radio tuner harness connector and ground.
Signal name Ground Connector No. B48 Terminal No. 15 Ignition switch position OFF Continuity Existed

AV

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

TEL ADAPTER UNIT


TEL ADAPTER UNIT : Diagnosis Procedure
INFOID:0000000005528515

1.CHECK FUSE
Check for blown fuses.

Revision: 2009 September

AV-113

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
Power source Battery Ignition switch ACC or ON Ignition switch ON or START

[BOSE AUDIO WITHOUT NAVIGATION]


Fuse No. 35 19 3

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between TEL adapter unit harness connector and ground.
Signal name Battery power supply ACC power supply Ignition signal B39 Connector No. Terminal No. 1 2 3 Ignition switch position OFF ACC ON Battery voltage Value (Approx.)

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between TEL adapter unit and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect TEL adapter unit connector. Check continuity between TEL adapter unit harness connector and ground.
Signal name Ground Connector No. B39 Terminal No. 4, 14, 20, 24 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

Revision: 2009 September

AV-114

2010 Murano

RGB (R: RED) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

RGB (R: RED) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description Diagnosis Procedure
INFOID:0000000005528516

Transmit the image displayed with AV control unit with RGB image signal to the front display unit.
INFOID:0000000005528517

1.CHECK CONTINUITY RGB (R: RED) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 17 AV control unit Connector M129 Terminal 40

E
Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 17 Ground

G
Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (R: RED) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

17

Ground

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2238J

AV

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-115

2010 Murano

RGB (G: GREEN) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

RGB (G: GREEN) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description Diagnosis Procedure
INFOID:0000000005528518

Transmit the image displayed with AV control unit with RGB image signal to the front display unit.
INFOID:0000000005528519

1.CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 6 AV control unit Connector M129 Terminal 39

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 6 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (G: GREEN) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

Ground

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2236J

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-116

2010 Murano

RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description Diagnosis Procedure
INFOID:0000000005528520

Transmit the image displayed with AV control unit with RGB image signal to the front display unit.
INFOID:0000000005528521

1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 18 AV control unit Connector M129 Terminal 38

E
Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 18 Ground

G
Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (B: BLUE) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

18

Ground

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2237J

AV

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-117

2010 Murano

RGB SYNCHRONIZING SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

RGB SYNCHRONIZING SIGNAL CIRCUIT


Description
INFOID:0000000005528522

Transmit the RGB synchronizing signal to the front display unit so as to synchronize the RGB image displayed with AV control unit.

Diagnosis Procedure

INFOID:0000000005528523

1.CHECK CONTINUITY RGB SYNCHRONIZING SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 19 AV control unit Connector M129 Terminal 41

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 19 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB SYNCHRONIZING SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

19

Ground

SKIB3603E

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-118

2010 Murano

RGB AREA (YS) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

RGB AREA (YS) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
INFOID:0000000005528524

Transmits the display area of RGB image displayed by AV control unit with RGB area (YS) signal to front display unit.

Diagnosis Procedure

INFOID:0000000005528525

1.CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 9 AV control unit Connector M129 Terminal 43

Continuity

F
Existed

4.

Check continuity between front display unit harness connector and ground.
G
Front display unit Connector M49 Terminal 9 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB AREA (YS) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal When RGB image is displayed. Approx. 5.0 V () Condition Signal

M
M49 9 Ground

When AUX image is displayed.

AV

PKIB4948J

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-119

2010 Murano

HP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

HP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


Description
INFOID:0000000005528526

In composite image (DVD image, AUX image, camera image), transmit the vertical synchronizing (VP) signal and horizontal synchronizing (HP) signal from front display unit to AV control unit so as to synchronize the RGB images displayed with AV control unit such as the image quality adjusting menu, etc.

Diagnosis Procedure

INFOID:0000000005528527

1.CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 8 AV control unit Connector M129 Terminal 45

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 8 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

Ground

SKIB3603E

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace front display unit.

Revision: 2009 September

AV-120

2010 Murano

VP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

VP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


Description
INFOID:0000000005528528

In composite image (DVD, AUX and camera image), transmit the vertical synchronizing (VP) signal and horizontal synchronizing (HP) signal from front display unit to AV control unit so as to synchronize the RGB images displayed with AV control unit such as the image quality adjusting menu, etc.

Diagnosis Procedure

INFOID:0000000005528529

1.CHECK CONTINUITY VERTICAL SYNCHRONIZING (VP) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 20 AV control unit Connector M129 Terminal 57

E
Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
G
Front display unit Connector M49 Terminal 20 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VERTICAL SYNCHRONIZING (VP) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M
M49 20 Ground

AV
SKIB3598E

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace front display unit.

Revision: 2009 September

AV-121

2010 Murano

COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

COMPOSITE IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
WITHOUT DVD ENTERTAINMENT SYSTEM
AV control unit that inputs the camera image signal and AUX image signal transmits the composite image signal to the front display unit.
INFOID:0000000005528530

WITH DVD ENTERTAINMENT SYSTEM


AV control unit receives the image signal from the video distributor and camera control unit and then transmits the composite image signal (AUX, DVD and camera image) to the front display unit.

Diagnosis Procedure

INFOID:0000000005528531

1.CHECK CONTINUITY COMPOSITE IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect AV control unit connector and front display unit connector. Check continuity between AV control unit harness connector and front display unit harness connector.
AV control unit Connector M129 Terminals 36 37 Front display unit Connector M49 Terminals 15 4

Continuity

Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 15 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK COMPOSITE IMAGE SIGNAL


1. 2. 3. Connect AV control unit connector and front display unit connector. Turn ignition switch ON. Check signal between front display harness connector using an oscilloscope.
(+) Front display unit Connector Terminal () Front display unit Connector Terminal Condition Signal

M49

15

M49

When AUX, DVD or camera image is displayed on front display.

SKIB2251J

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-122

2010 Murano

COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO AV CONTROL UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO AV CONTROL UNIT)


Description
INFOID:0000000005528532

Video distributor receives the image signal from the DVD player and auxiliary input jack and then transmits it to the AV control unit and rear display unit.

Diagnosis Procedure

INFOID:0000000005528533

1.CHECK CONTINUITY COMPOSITE IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect video distributor connector and AV control unit connector. Check continuity between video distributor harness connector and AV control unit harness connector.
Video distributor Connector M258 Terminals 8 6 AV control unit Connector M130 Terminals 66 74

Continuity

F
Existed

4.

Check continuity between AV control unit harness connector and ground.


AV control unit Connector M130 Terminal 66 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK COMPOSITE IMAGE SIGNAL


1. 2. 3. Connect video distributor connector and AV control unit connector. Turn ignition switch ON. Check signal between AV control unit harness connector using an oscilloscope.
(+) AV control unit Connector Terminal () AV control unit Connector Terminal Condition Signal

M130

66

M130

74

When AUX, DVD or camera image is displayed on front display.

AV

SKIB2251J

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace video distributor.

Revision: 2009 September

AV-123

2010 Murano

COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

COMPOSITE IMAGE SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)


Description
INFOID:0000000005528534

Video distributor receives the image signal from the DVD player and auxiliary input jack and then transmits it to the AV control unit and rear display unit.

Diagnosis Procedure

INFOID:0000000005528535

1.CHECK CONTINUITY COMPOSITE IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect video distributor connector and rear display unit connector. Check continuity between video distributor harness connector and rear display unit harness connector.
Video distributor Connector M257 Terminal 34 Rear display unit Connector R152 Terminal 14

Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
Rear display unit Connector R152 Terminal 14 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK COMPOSITE IMAGE SIGNAL


1. 2. 3. Connect video distributor connector and rear display unit connector. Turn ignition switch ON. Check signal between rear display unit harness connector using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

R152

14

Ground

When AUX, DVD or camera image is displayed on front display.

SKIB2251J

Is the inspection result normal? YES >> Replace rear display unit. NO >> Replace video distributor.

Revision: 2009 September

AV-124

2010 Murano

RGB (R: RED) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

RGB (R: RED) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
Description
Transmit the image displayed with video distributor with RGB signal to the rear display unit.
INFOID:0000000005528536

Diagnosis Procedure

INFOID:0000000005528537

1.CHECK CONTINUITY RGB (R: RED) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 22 Video distributor Connector M257 Terminal 25

E
Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
Rear display unit Connector R152 Terminal 22 Ground

G
Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (R: RED) SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

R152

22

Ground

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.

AV
JSNIA0984ZZ

Is the inspection result normal? YES >> Replace rear display unit. NO >> Replace video distributor.

Revision: 2009 September

AV-125

2010 Murano

RGB (G: GREEN) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

RGB (G: GREEN) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
Description
Transmit the image displayed with video distributor with RGB signal to the rear display unit.
INFOID:0000000005528538

Diagnosis Procedure

INFOID:0000000005528539

1.CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 21 Video distributor Connector M257 Terminal 26

Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
Rear display unit Connector R152 Terminal 21 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (G: GREEN) SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

R152

21

Ground

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.

JSNIA0984ZZ

Is the inspection result normal? YES >> Replace rear display unit. NO >> Replace video distributor.

Revision: 2009 September

AV-126

2010 Murano

RGB (B: BLUE) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

RGB (B: BLUE) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
Description
Transmit the image displayed with video distributor with RGB signal to the rear display unit.
INFOID:0000000005528540

Diagnosis Procedure

INFOID:0000000005528541

1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 20 Video distributor Connector M257 Terminal 28

E
Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
Rear display unit Connector R152 Terminal 20 Ground

G
Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (B: BLUE) SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

R152

20

Ground

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.

AV
JSNIA1090ZZ

Is the inspection result normal? YES >> Replace rear display unit. NO >> Replace video distributor.

Revision: 2009 September

AV-127

2010 Murano

COMPOSITE SYNCHRONIZING SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

COMPOSITE SYNCHRONIZING SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)


Description
INFOID:0000000005528542

Transmit the composite synchronizing signal to the rear display unit so as to synchronize the composite image displayed with video distributor.

Diagnosis Procedure

INFOID:0000000005528543

1.CHECK CONTINUITY COMPOSITE SYNCHRONIZING SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 13 Video distributor Connector M257 Terminal 33

Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
Rear display unit Connector R152 Terminal 13 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK COMPOSITE SYNCHRONIZING SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

R152

13

Ground

When AUX or DVD image is displayed on rear display unit.

SKIB0825E

Is the inspection result normal? YES >> Replace rear display unit. NO >> Replace video distributor.

Revision: 2009 September

AV-128

2010 Murano

RGB AREA (YS) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

RGB AREA (YS) SIGNAL CIRCUIT (VIDEO DISTRIBUTOR TO REAR DISPLAY UNIT)
Description
INFOID:0000000005528544

Transmits the display area of RGB image displayed by video distributor with RGB area (YS) signal to rear display unit.

Diagnosis Procedure

INFOID:0000000005528545

1.CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 15 Video distributor Connector M257 Terminal 32

Continuity

F
Existed

4.

Check continuity between rear display unit harness connector and ground.
G
Rear display unit Connector R152 Terminal 15 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB AREA (YS) SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal When AUX or DVD image is displayed on rear display unit. 0V () Condition Signal

R152

15

Ground

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.

AV

O
PKIB4948J

Is the inspection result normal? YES >> Replace rear display unit. NO >> Replace video distributor.

Revision: 2009 September

AV-129

2010 Murano

VP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

VP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)


Description
INFOID:0000000005528546

In composite image (DVD and AUX images), transmit the vertical synchronizing (VP) signal and horizontal synchronizing (HP) signal from rear display unit to video distributor so as to synchronize the RGB images displayed with video distributor such as the image quality adjusting menu, etc.

Diagnosis Procedure

INFOID:0000000005528547

1.CHECK CONTINUITY VERTICAL SYNCHRONIZING (VP) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 17 Video distributor Connector M257 Terminal 29

Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
Rear display unit Connector R152 Terminal 17 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VERTICAL SYNCHRONIZING (VP) SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

R152

17

Ground

SKIB3598E

Is the inspection result normal? YES >> Replace video distributor. NO >> Replace rear display unit.

Revision: 2009 September

AV-130

2010 Murano

HP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A

HP SIGNAL CIRCUIT (REAR DISPLAY UNIT TO VIDEO DISTRIBUTOR)


Description
INFOID:0000000005528548

In composite image (DVD and AUX images), transmit the vertical synchronizing (VP) signal and horizontal synchronizing (HP) signal from rear display unit to video distributor so as to synchronize the RGB images displayed with video distributor such as the image quality adjusting menu, etc.

Diagnosis Procedure

INFOID:0000000005528549

1.CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect rear display unit connector and video distributor connector. Check continuity between rear display unit harness connector and video distributor harness connector.
Rear display unit Connector R152 Terminal 18 Video distributor Connector M257 Terminal 30

E
Continuity Existed

4.

Check continuity between rear display unit harness connector and ground.
G
Rear display unit Connector R152 Terminal 18 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL


1. 2. 3. Connect rear display unit connector and video distributor connector. Turn ignition switch ON. Check signal between rear display unit harness connector and ground using an oscilloscope.
(+) Rear display unit Connector Terminal () Condition Signal

M
R152 18 Ground

AV
SKIB3601E

Is the inspection result normal? YES >> Replace video distributor. NO >> Replace rear display unit.

Revision: 2009 September

AV-131

2010 Murano

AUX IMAGE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

AUX IMAGE SIGNAL CIRCUIT


WITHOUT DVD ENTERTAINMENT SYSTEM
WITHOUT DVD ENTERTAINMENT SYSTEM : Description
Transmits the image signal of AUX device from auxiliary input jacks to AV control unit. AV control unit transmits the image signal that is input to the front display unit.
INFOID:0000000005528550

WITHOUT DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure


1. 2. 3.

INFOID:0000000005528551

1.CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT (AUX INPUT JACKS AND AV CONTROL UNIT)
Turn ignition switch OFF. Disconnect auxiliary input jacks connector and AV control unit connector. Check continuity between auxiliary input jacks harness connector and AV control unit harness connector.
Auxiliary input jacks Connector M253 Terminals 7 8 AV control unit Connector M130 Terminals 66 74

Continuity

Existed

4.

Check continuity between AV control unit harness connector and ground.


AV control unit Connector M130 Terminal 66 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AUX IMAGE SIGNAL (AUX INPUT JACKS TO AV CONTROL UNIT)


1. 2. 3. Connect auxiliary connector and AV control unit connector. Turn ignition switch ON. Check signal between AV control unit harness connector using an oscilloscope.
(+) AV control unit Connector Terminal () AV control unit Connector Terminal Condition Signal

M130

66

M130

74

When AUX image is displayed on front display.

SKIB2251J

Is the inspection result normal? YES >> GO TO 3. NO >> Check that there is no malfunction in the external device.

3.CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT (AV CONTROL UNIT AND FRONT DISPLAY UNIT)
1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.

Revision: 2009 September

AV-132

2010 Murano

AUX IMAGE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
AV control unit Connector M129 Terminals 36 37 Front display unit Connector M49 Terminals 15 4

[BOSE AUDIO WITHOUT NAVIGATION]


A
Continuity

Existed

4.

Check continuity between front display unit harness connector and ground.
C
Front display unit Connector M49 Terminal 15 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 4. NO >> Repair harness or connector.

4.CHECK AUX IMAGE SIGNAL


1. 2. 3. Connect AV control unit connector and front display unit connector. Turn ignition switch ON. Check signal between front display unit harness connector using an oscilloscope.
(+) Front display unit Connector Terminal () Front display unit Connector Terminal Condition Signal

I
M49 15 M49 4 When AUX image is displayed on front display.

J
SKIB2251J

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

WITH DVD ENTERTAINMENT SYSTEM


WITH DVD ENTERTAINMENT SYSTEM : Description
Transmits the image signal of external device from auxiliary input jacks to video distributor.
INFOID:0000000005528552

M
INFOID:0000000005528553

WITH DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure

1.CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect auxiliary input jacks connector and video distributor connector. Check continuity between auxiliary input jacks harness connector and video distributor harness connector.
Auxiliary input jacks Connector M253 Terminals 7 8 Video distributor Connector M258 Terminals 19 21

AV

P
Continuity

Existed

4.

Check continuity between video distributor harness connector and ground.

Revision: 2009 September

AV-133

2010 Murano

AUX IMAGE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
Video distributor Connector M258 Terminal 19 Ground

[BOSE AUDIO WITHOUT NAVIGATION]

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AUX IMAGE SIGNAL


1. 2. 3. Connect auxiliary input jacks connector and video distributor connector. Turn ignition switch ON. Check signal between video distributor harness connector using an oscilloscope.
(+) Video distributor Connector Terminal () Video distributor Connector Terminal Condition Signal

M258

19

M258

21

When AUX image is displayed.

SKIB2251J

Is the inspection result normal? YES >> Replace video distributor. NO >> Check that there is no malfunction in the external device.

Revision: 2009 September

AV-134

2010 Murano

DVD IMAGE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528554

DVD IMAGE SIGNAL CIRCUIT


Description
The DVD player transmits the playback DVD image signal to the video distributor. The video distributor receives the image signal from the DVD player, and auxiliary input jack, and then transmits it to the AV control unit and rear display.

Diagnosis Procedure

INFOID:0000000005528555

1.CHECK CONTINUITY DVD IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect DVD player connector and video distributor connector. Check continuity between DVD player harness connector and video distributor harness connector.
DVD player Connector M254 Terminals 7 5 Video distributor Connector M258 Terminals 23 22

E
Continuity

F
Existed

4.

Check continuity between video distributor harness connector and ground.


Video distributor Connector M258 Terminal 23 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK DVD IMAGE SIGNAL


1. 2. 3. Connect DVD player connector and video distributor connector. Turn ignition switch ON. Check signal between video distributor harness connector and ground using an oscilloscope.
(+) Video distributor Connector Terminal () Condition Signal

M
M258 23 Ground When DVD image is displayed.

AV

SKIB2251J

Is the inspection result normal? YES >> Replace video distributor. NO >> Replace DVD player.

Revision: 2009 September

AV-135

2010 Murano

DISK EJECT SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

DISK EJECT SIGNAL CIRCUIT


Description Diagnosis Procedure
INFOID:0000000005528556

The eject signal is output to AV control unit when the eject switch of multifunction switch is pressed.
INFOID:0000000005528557

1.CHECK CONTINUITY DISK EJECT SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect multifunction switch connector and AV control unit connector. Check continuity between multifunction switch harness connector and AV control unit harness connector.
Multifunction switch Connector M125 Terminal 14 AV control unit Connector M131 Terminal 103

Continuity Existed

4.

Check continuity between multifunction switch harness connector and ground.


Multifunction switch Connector M125 Terminal 14 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector. Turn ignition switch ON. Check voltage between AV control unit harness connector and ground.
(+) AV control unit Connector M131 Terminal 103 Ground 3.3 V () Voltage (Approx.)

Is the inspection result normal? YES >> Replace preset switch. NO >> Replace AV control unit.

Revision: 2009 September

AV-136

2010 Murano

MICROPHONE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528558

MICROPHONE SIGNAL CIRCUIT


Description
Supply power from TEL adapter unit to microphone. The microphone transmits the sound/voice to the microphone.

Diagnosis Procedure

INFOID:0000000005528559

1.CHECK CONTINUITY BETWEEN TEL ADAPTER UNIT AND MICROPHONE CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect TEL adapter unit connector and microphone connector. Check continuity between TEL adapter unit harness connector and microphone harness connector.
TEL adapter unit Connector Terminals 7 B39 8 29 R20 Microphone Connector Terminals 1 2 4 Existed

E
Continuity

4.

Check continuity between TEL adapter unit harness connector and ground.
TEL adapter unit Connector B39 Terminals 7 29 Ground Not existed

Continuity

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VOLTAGE MICROPHONE VCC


1. 2. 3. Connect TEL adapter unit connector. Turn ignition switch ON. Check voltage between TEL adapter unit harness connector.
(+) TEL adapter unit Connector B39 Terminal 29 () TEL adapter unit Connector B39 Terminal 8 5.0 V Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 3. NO >> Replace TEL adapter unit.

AV

3.CHECK MICROPHONE SIGNAL


1. 2. Connect microphone connector. Check signal between TEL adapter unit harness connector using an oscilloscope.

Revision: 2009 September

AV-137

2010 Murano

MICROPHONE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
(+) TEL adapter unit Connector Terminal () TEL adapter unit Connector Terminal Condition Signal

[BOSE AUDIO WITHOUT NAVIGATION]

B39

B39

Give a voice

PKIB5037J

Is the inspection result normal? YES >> Replace TEL adapter unit. NO >> Replace microphone.

Revision: 2009 September

AV-138

2010 Murano

CONTROL SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528560

CONTROL SIGNAL CIRCUIT


Description Diagnosis Procedure
TEL adapter unit identifies the vehicle model according to the control signal and performs the control.
INFOID:0000000005528561

1.CHECK CONTINUITY CONTROL SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect TEL adapter unit connector. Check continuity between TEL adapter unit harness connector and ground.
TEL adapter unit Connector B39 Terminals 20 24 Ground Existed

Continuity

Is the inspection result normal? YES >> Replace TEL adapter unit. NO >> Repair harness or connector.

AV

Revision: 2009 September

AV-139

2010 Murano

CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT)
Description
INFOID:0000000005528562

Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image signal from rear view camera when the reverse signal is input. The camera control unit that inputs the camera image signal transmits the camera image signal to the AV control unit.

Diagnosis Procedure

INFOID:0000000005528563

1.CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and rear view camera connector. Check continuity between camera control unit harness connector and rear view camera harness connector.
Camera control unit Connector B60 Terminal 6 Rear view camera Connector D192 Terminal 3

Continuity Existed

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector B60 Terminal 6 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK CAMERA IMAGE SIGNAL


1. 2. 3. Connect camera control unit connector and rear view camera connector. Turn ignition switch ON. Check signal between camera control unit harness connector and ground using an oscilloscope.
(+) Camera control unit Connector Terminal () Condition Signal

B60

Ground

Shift the selector lever to R position.

SKIB2251J

Is the inspection result normal? YES >> Replace camera control unit. NO >> Replace rear view camera.

Revision: 2009 September

AV-140

2010 Murano

CAMERA ON SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528564

CAMERA ON SIGNAL CIRCUIT


Description
Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image signal from rear view camera when the reverse signal is input. The camera control unit that inputs the camera image signal transmits the camera image signal to the AV control unit.

Diagnosis Procedure

INFOID:0000000005528565

1.CHECK CONTINUITY CAMERA ON SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and rear view camera connector. Check continuity between camera control unit harness connector and rear view camera harness connector.
Camera control unit Connector B60 Terminal 8 Rear view camera Connector D192 Terminal 1

Continuity Existed

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector B60 Terminal 8 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VOLTAGE CAMERA ON SIGNAL


1. 2. 3. Connect camera control unit connector and rear view camera connector. Turn ignition switch ON. Check signal between camera control unit harness connector and ground.
(+) Camera control unit Connector B60 Terminal 8 Ground Shift the selector lever to R position. 6.0 V () Condition Voltage (Approx.)

Is the inspection result normal? YES >> Replace rear view camera. NO >> Replace camera control unit.

AV

Revision: 2009 September

AV-141

2010 Murano

CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO AV CONTROL UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO AV CONTROL UNIT)


Description
INFOID:0000000005528566

Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image signal from rear view camera when the reverse signal is input. The camera control unit that inputs the camera image signal transmits the camera image signal to the AV control unit.

Diagnosis Procedure

INFOID:0000000005528567

1.CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and AV control unit connector. Check continuity between camera control unit harness connector and AV control unit harness connector.
Camera control unit Connector B60 Terminal 12 11 AV control unit Connector M130 Terminal 65 64

Continuity

Existed

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector B60 Terminal 12 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK CAMERA IMAGE SIGNAL


1. 2. 3. Connect camera control unit connector and AV control unit connector. Turn ignition switch ON. Check signal between camera control unit harness connector and ground using an oscilloscope.
(+) Camera control unit Connector Terminal () Condition Signal

B60

12

Ground

Shift the selector lever to R position.

SKIB2251J

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace camera control unit.

Revision: 2009 September

AV-142

2010 Murano

STEERING ANGLE SENSOR SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528568

STEERING ANGLE SENSOR SIGNAL CIRCUIT


Description
Steering angle sensor signal 1, 2 detects the turning direction and quantity of the steering and transmits it to the camera control unit. Steering angle sensor signal 3 detects the neutral position of the steering and transmits it to the camera control unit. Camera control unit performs the correction of neutral position with sensor signal 1, 2, 3 and vehicle speed signal.

Diagnosis Procedure

INFOID:0000000005528569

1.CHECK CONTINUITY STEERING ANGLE SENSOR SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and steering angle sensor connector. Check continuity between camera control unit harness connector and steering angle sensor harness connector.
Camera control unit Connector Terminals 23 B60 24 25 M30 Steering angle sensor Connector Terminals 3 6 8 Existed

Continuity

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector Terminals 23 B60 24 25 Ground Not existed

I
Continuity

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VOLTAGE CAMERA CONTROL UNIT


1. 2. 3. Connect camera control unit connector. Turn ignition switch ON. Check voltage between camera control unit harness connector and ground.
(+) Camera control unit Connector Terminals 23 B60 24 25 Ground 5.0 V () Reference value (Approx.)

AV

Is the inspection result normal? YES >> GO TO 3. NO >> Replace camera control unit.

3.CHECK STEERING ANGLE SENSOR SIGNAL


1. 2. Turn ignition switch OFF. Connect steering angle sensor connector.
Revision: 2009 September

AV-143

2010 Murano

STEERING ANGLE SENSOR SIGNAL CIRCUIT


[BOSE AUDIO WITHOUT NAVIGATION] < DTC/CIRCUIT DIAGNOSIS > 3. Turn ignition switch ON. 4. Check signal between camera control unit harness connector and ground.
(+) Camera control unit Connector Terminals () Condition Reference value

Turn the steering to the right

SKIB3827E

23, 24

Ground

A: Sensor signal 1 B: Sensor signal 2

B60

Turn the steering to the left

SKIB3828E

A: Sensor signal 1 B: Sensor signal 2

25

Ground

Turn the steering around the neutral position


SKIB3829E

A: Sensor signal 3 B: Sensor signal 1

Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering angle sensor.

Revision: 2009 September

AV-144

2010 Murano

STEERING SWITCH SIGNAL A CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528570

STEERING SWITCH SIGNAL A CIRCUIT


Description
Transmits the steering switch signal to AV control unit.

B
INFOID:0000000005528571

Diagnosis Procedure

1.CHECK STEERING SWITCH SIGNAL A CIRCUIT


1. 2. Disconnect AV control unit connector and spiral cable connector. Check continuity between AV control unit harness connector and spiral cable harness connector.

D
AV control unit Connector M127 Terminal 6 Spiral cable Connector M33 Terminal 24 Continuity

E
Existed

3.

Check continuity between AV control unit harness connector and ground.


F
AV control unit Connector M127 Terminal 6 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.
I J

3.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector and spiral cable connector. Turn ignition switch ON. Check voltage between AV control unit harness connector.
(+) AV control unit Connector M127 Terminal 6 () AV control unit Connector M127 Terminal 15 3.3 V Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

AV

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-146, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-145

2010 Murano

STEERING SWITCH SIGNAL A CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528572

Component Inspection
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.

JSNIA0216GB

Standard

Steering switch Connector Terminal Connector Terminal Condition

Resistance 709 737 315 327 119 123 0 315 327 119 123 0

switch ON 14 M303 M303 17 MENU DOWN switch ON MENU UP switch ON SOURCE switch ON switch ON 15 VOL UP switch ON VOL DOWN switch ON

Revision: 2009 September

AV-146

2010 Murano

STEERING SWITCH SIGNAL B CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528573

STEERING SWITCH SIGNAL B CIRCUIT


Description
Transmits the steering switch signal to AV control unit.

B
INFOID:0000000005528574

Diagnosis Procedure

1.CHECK STEERING SWITCH SIGNAL B CIRCUIT


1. 2. Disconnect AV control unit connector and spiral cable connector. Check continuity between AV control unit harness connector and spiral cable harness connector.

D
AV control unit Connector M127 Terminal 16 Spiral cable Connector M33 Terminal 31 Continuity

E
Existed

3.

Check continuity between AV control unit harness connector and ground.


F
AV control unit Connector M127 Terminal 16 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.
I J

3.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector and spiral cable connector. Turn ignition switch ON. Check voltage between AV control unit harness connector.
(+) AV control unit Connector M127 Terminal 16 () AV control unit Connector M127 Terminal 15 3.3 V Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

AV

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-148, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-147

2010 Murano

STEERING SWITCH SIGNAL B CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528575

Component Inspection
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.

JSNIA0216GB

Standard

Steering switch Connector Terminal Connector Terminal Condition

Resistance 709 737 315 327 119 123 0 315 327 119 123 0

switch ON 14 M303 M303 17 MENU DOWN switch ON MENU UP switch ON SOURCE switch ON switch ON 15 VOL UP switch ON VOL DOWN switch ON

Revision: 2009 September

AV-148

2010 Murano

STEERING SWITCH SIGNAL GND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528576

STEERING SWITCH SIGNAL GND CIRCUIT


Description
Transmits the steering switch signal to AV control unit.

B
INFOID:0000000005528577

Diagnosis Procedure

1.CHECK STEERING SWITCH SIGNAL GND CIRCUIT


1. 2. Disconnect AV control unit connector and spiral cable connector. Check continuity between AV control unit harness connector and spiral cable harness connector.

D
AV control unit Connector M127 Terminal 15 Spiral cable Connector M33 Terminal 33 Continuity

E
Existed

3. Connect AV control unit connector. Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK GROUND CIRCUIT


1. 2. Connect AV control unit connector. Check continuity between AV control unit harness connector and ground.

J
AV control unit Connector M127 Terminal 15 Ground Continuity

K
Existed

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-150, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.
M AV

Revision: 2009 September

AV-149

2010 Murano

STEERING SWITCH SIGNAL GND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528578

Component Inspection
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.

JSNIA0216GB

Standard

Steering switch Connector Terminal Connector Terminal Condition

Resistance 709 737 315 327 119 123 0 315 327 119 123 0

switch ON 14 M303 M303 17 MENU DOWN switch ON MENU UP switch ON SOURCE switch ON switch ON 15 VOL UP switch ON VOL DOWN switch ON

Revision: 2009 September

AV-150

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

ECU DIAGNOSIS INFORMATION


AV CONTROL UNIT
Reference Values
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
INFOID:0000000005528579

C
Condition Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ACC Ignition switch ON Vehicle speed > 0 km/h (0 MPH) Vehicle speed = 0 km/h (0 MPH) Parking brake is applied. Parking brake is released. Light switch ON Light switch OFF Selector lever in R position Selector lever in any position other than R Value/Status On Off On Off On Off On Off On Off

Monitor Item VHCL SPD SIG

PKB SIG

ILLUM SIG

IGN SIG

REV SIG

TERMINAL LAYOUT

K
JPNIA0009ZZ

PHYSICAL VALUES
L
Terminal (Wire color) + Description Signal name Input/ Output Condition Reference value (Approx.)

Keep pressing SOURCE switch. Ignition switch ON Keep pressing Keep pressing Keep pressing switch. Except for above. 7 (R) 9 (R) Ground ACC power supply Input Ignition switch ACC OFF Lighting switch is OFF. Lighting switch is ON. switch. switch.

0V 0.7 V 1.3 V 2.0 V 3.3 V Battery voltage 0V 12.0 V

AV

6 (BR)

15 (L)

Steering switch signal A

Input

Ground

Illumination signal

Input

Revision: 2009 September

AV-151

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 15 (L) Description Signal name Input/ Output Ignition switch ON Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

Ground

Steering switch signal GND

Keep pressing VOL DOWN switch.

0V

0V 0.7 V 1.3 V 3.3 V Battery voltage

16 (G)

15 (L)

Steering switch signal B

Input

Ignition switch ON

Keep pressing VOL UP switch. Keep pressing Except for above. switch.

19 (Y) 20 (B)

Ground

Battery power supply

Input

Ignition switch OFF Ignition switch ON

Ground

Ground

0V

22 (G)

21 (B)

Satellite radio sound signal LH

Input

Ignition switch ON

When satellite radio mode is selected.

SKIB3609E

24 (W)

23 (R)

Satellite radio sound signal RH

Input

Ignition switch ON

When satellite radio mode is selected.

SKIB3609E

25 26

Shield Shield

28 (R)

Ground

Request signal (SATCONT)

Input

Ignition switch ON

When satellite radio mode is selected.

SKIA9299J

29 (W)

Ground

Communication signal (SATCONT)

Input

Ignition switch ON

When satellite radio mode is selected.

SKIA9300J

Revision: 2009 September

AV-152

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

30 (B)

Ground

Communication signal (CONTSAT)

Output

When satellite radio mode is selected.

SKIA9301J

33 34 35

Ground

FM sub AMFM main Antenna amp. ON signal Without DVD player models Composite image signal (AUX/Camera image) With DVD player models Composite image signal (DVD/AUX/Camera image) Composite image ground

Input Input Output

Ignition switch ACC

12.0 V

36 (L)

37 (P)

Output

Ignition switch ON

When composite image is displayed.

H
SKIB2251J

37 (P)

Ground

Ignition switch ON

0V

38 (Y)

Ground

RGB image signal (B: blue)

Output

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2237J

39 (L)

Ground

RGB image signal (G: green)

Output

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2236J

AV

40 (G)

Ground

RGB image signal (R: red)

Output

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2238J

Revision: 2009 September

AV-153

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

41 (B)

Ground

RGB synchronizing signal

Output

Ignition switch ON

SKIB3603E

42

Shield

When RGB image is displayed.

5.0 V

43 (W)

Ground

RGB area (YS) signal

Output

Ignition switch ON

When AUX or camera image is displayed.

PKIB4948J

44 (G)

Ground

Communication signal (DISPCONT)

Input

Ignition switch ON

When adjusting display brightness.

PKIB5039J

45 (G)

Ground

Horizontal synchronizing (HP) signal

Input

Ignition switch ON

SKIB3601E

46 (LG) 47 (O) 49 50 55

Ground

Signal GND

Ignition switch ON Ignition switch ACC

0V

Ground

Signal VCC (front display unit power supply) Shield Shield Shield

Output

9.0 V

56 (R)

Ground

Communication signal (CONTDISP)

Output

Ignition switch ON

When adjusting display brightness.

PKIB5039J

Revision: 2009 September

AV-154

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

57 (R)

Ground

Vertical synchronizing (VP) signal

Input

SKIB3598E

58 (BR) 59 (Y)

Ground

Inverter GND

Ignition switch ON Ignition switch ACC Ignition switch ON

0V

E
9.0 V

Ground

Inverter VCC (front display unit power supply) Shield (camera image ground)

Output

F
0V

64

Ground

65 (W)

64

Camera image signal

Input

Ignition switch ON

when rear view camera image is displayed.

I
SKIB2251J

66 (Y)*1 (L)*3

74 (B)*1 (R)*3

Without DVD player models AUX image signal With DVD player models Composite image signal (DVD/AUX image) Input Ignition switch ON

When AUX image is displayed.

When DVD or AUX image is displayed.


SKIB2251J

68 (P) 73

Ground

Camera-connection recognition signal Shield Without DVD player models AUX image signal ground With DVD player models Composite image signal ground (DVD/AUX image)

Input

Ignition switch ON

Connected to camera control unit connector. Not connected to camera control unit connector.

0V 5.0 V

74 (B)*1 (BR)
*2

AV
Ignition switch ON 0V

Ground

(R)*3

P
Ignition switch ON

80 (R)

79 (L)

TEL voice signal

Input

During voice guide output with the switch pressed.

SKIB3609E

Revision: 2009 September

AV-155

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 81 Shield Without DVD player models Sound signal RH (iPod sound) Input With DVD player models Sound signal RH (iPod, DVD and AUX sound) Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

When iPod mode is selected

83 (R)

82 (W)

Ignition switch ON

When iPod, DVD or AUX mode is selected


SKIB3609E

85 (B) 86 (L) 87 (P) 88 (R) 89 (L) 90 (G) 91 (L)

Ground

Ground

Input/ Output Input/ Output Input/ Output Input/ Output Input/ Output Input/ Output

Ignition switch ON

0V

CANH CANL AV communication signal (H) AV communication signal (L) AV communication signal (H) AV communication signal (L)

95*4 (R)

97*4 (W)

AUX sound signal RH

Input

Ignition switch ON

When AUX mode is selected

SKIB3609E

96*4 (B)

97*4 (W)

AUX sound signal LH

Input

Ignition switch ON

When AUX mode is selected

SKIB3609E

97*4 (W)

Ground

AUX sound signal ground Without DVD player models Sound signal RH (iPod sound)

Ignition switch ON

0V

99 (BR)*4 (B)*3

98 (L)*4 (G)*3

When iPod mode is selected Input Ignition switch ON

With DVD player models Sound signal RH (iPod, DVD and AUX sound) Shield

When iPod, DVD or AUX mode is selected


SKIB3609E

100

Revision: 2009 September

AV-156

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 101 (V) 103 (W) 104 (G) 105 (SB) 106 (G) Description Signal name Input/ Output Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ON Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Pressing the eject switch Except for above The R position Other than the R position Parking brake ON Parking brake OFF 0V 0V 3.3 V Battery voltage 12.0 V 0V 0V 5.0 V NOTE: Maximum voltage may be 12 V due to specifications (connected units).

Ground

SW ground

Ground

Eject signal

Input

Ground

Ignition signal

Input

Ground

Reverse signal

Input

Ground

Parking brake signal

Input

107 (V)

Ground

Vehicle speed signal (8-pulse)

Input

Ignition switch ON

When vehicle speed is approx. 40 km/h (25 MPH)

I
SKIA6649J

J
108 (V) 114 (LG) Sound signal rear RH Output Ignition switch ON Voice output

K
SKIB3609E

L
Ignition switch ON

109 (B)

115 (W)

Sound signal front RH

Output

Voice output

SKIB3609E

AV

110 (P) 111

Ground

Amp. ON signal Shield

Output

Ignition switch ON

10.0 V

Revision: 2009 September

AV-157

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

112 (O)*1 (L)*2

118 (SB)*1 (R)*2 Sound signal rear LH Output

Ignition switch ON

Voice output

SKIB3609E

113 (G)

119 (R)

Sound signal front LH

Output

Ignition switch ON

Voice output

SKIB3609E

NOTE: *1: Without DVD player models (Type A). *2: Without DVD player models (Type B). *3: With DVD player models. *4: Only for models without DVD player.

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528580

Revision: 2009 September

AV-158

2010 Murano

AV CONTROL UNIT
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM3177GB

Revision: 2009 September

AV-159

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3178GB

Revision: 2009 September

AV-160

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3179GB

Revision: 2009 September

AV-161

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3180GB

Revision: 2009 September

AV-162

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3181GB

Revision: 2009 September

AV-163

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3182GB

Revision: 2009 September

AV-164

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3183GB

Revision: 2009 September

AV-165

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3184GB

Revision: 2009 September

AV-166

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3185GB

Revision: 2009 September

AV-167

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3186GB

Revision: 2009 September

AV-168

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3187GB

Revision: 2009 September

AV-169

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3188GB

Revision: 2009 September

AV-170

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3189GB

Revision: 2009 September

AV-171

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3190GB

Revision: 2009 September

AV-172

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3191GB

Revision: 2009 September

AV-173

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3192GB

Revision: 2009 September

AV-174

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3193GB

Revision: 2009 September

AV-175

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528581

Revision: 2009 September

AV-176

2010 Murano

AV CONTROL UNIT
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1872GB

Revision: 2009 September

AV-177

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1873GB

Revision: 2009 September

AV-178

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1874GB

Revision: 2009 September

AV-179

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1875GB

Revision: 2009 September

AV-180

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1876GB

Revision: 2009 September

AV-181

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3195GB

Revision: 2009 September

AV-182

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3196GB

Revision: 2009 September

AV-183

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3197GB

Revision: 2009 September

AV-184

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3198GB

Revision: 2009 September

AV-185

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3199GB

Revision: 2009 September

AV-186

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3200GB

Revision: 2009 September

AV-187

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3201GB

Revision: 2009 September

AV-188

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3202GB

Revision: 2009 September

AV-189

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3203GB

Revision: 2009 September

AV-190

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3204GB

Revision: 2009 September

AV-191

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3205GB

Revision: 2009 September

AV-192

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3206GB

Revision: 2009 September

AV-193

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3207GB

Revision: 2009 September

AV-194

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3208GB

Revision: 2009 September

AV-195

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3209GB

Revision: 2009 September

AV-196

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3210GB

DTC Index
SELF-DIAGNOSIS RESULTS DISPLAY ITEM

P
INFOID:0000000005528582

Revision: 2009 September

AV-197

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
DTC U1000 U1010 U1310 U1200 U1216 U1243 U1247 U1250 U1255 U1300 U1240 U1300 U1246 U1300 U1248 U1300 U1252 U1300 U1254 U1300 U1256 U1300 U1252 U1256* U1300 U1248 U1252 U1256 U1300 U1246 U1248 U1252 U1254 U1256 U1300 U1246 U1248 U1252 U1256 U1300 U1240 U1254* U1256* U1300 U1240 U1246 U1248 U1252 U1254 U1256 NOTE: *: Non-equipped item is not displayed. Display item CAN COMM CIRCUIT [U1000] CONTROL UNIT (CAN) [U1010] CONTROL UNIT (AV) [U1310] Control Unit FLASH-ROM [U1200] CAN CONT [U1216] FRONT DISP CONN [U1243] REAR DISP CONN [U1247] CAMERA CONT CONN [U1250] SAT CONN [U1255] AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] AV COMM CIRCUIT [U1300] DVD DECK CONN [U1248] AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] AV COMM CIRCUIT [U1300] IPod CONN [U1254] AV COMM CIRCUIT [U1300] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256]* AV COMM CIRCUIT [U1300] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254] HAND FREE CONN [U1256] AV COMM CIRCUIT [U1300] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] HAND FREE CONN [U1256]

[BOSE AUDIO WITHOUT NAVIGATION]


Refer to AV-93, "Diagnosis Procedure" AV-94, "Diagnosis Procedure" AV-95, "DTC Logic" AV-96, "DTC Logic" AV-97, "DTC Logic" AV-98, "Diagnosis Procedure" AV-100, "Diagnosis Procedure" AV-102, "Diagnosis Procedure" AV-103, "Diagnosis Procedure" AV-105, "Description" AV-105, "Description" AV-105, "Description" AV-105, "Description" AV-105, "Description" AV-105, "Description"

AV-105, "Description"

AV-105, "Description"

AV-105, "Description"

AV-105, "Description"

AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] IPod CONN [U1254]* HAND FREE CONN [U1256]* AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] VIDEO DIST CONN [U1246] DVD DECK CONN [U1248] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254] HAND FREE CONN [U1256]

AV-105, "Description"

AV-105, "Description"

Revision: 2009 September

AV-198

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528583

FRONT DISPLAY UNIT


Reference Values
TERMINAL LAYOUT

JPNIA0006ZZ

PHYSICAL VALUES
F
Terminal (Wire color) + 1 (B) 2 (Y) 3 (O) 4 (P) 5 Description Signal name Input/ Output Ignition switch ON Ignition switch ACC Ignition switch ACC Ignition switch ON Condition Reference value (Approx.)

Ground

Ground

0V

Ground

Inverter VCC

Input

9.0 V

Ground

Signal VCC

Input

9.0 V

Ground

Composite image GND Shield

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.

0V

6 (L)

Ground

RGB signal (G: green)

Input

Ignition switch ON

M
SKIB2236J

Shield

AV

O
8 (G) Ground Horizontal synchronizing (HP) signal Output Ignition switch ON

P
SKIB3601E

Revision: 2009 September

AV-199

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

When RGB image is displayed

5.0 V

9 (W)

Ground

RGB area (YS) signal

Input

Ignition switch ON

When AUX image is displayed

PKIB4948J

11 (R)

Ground

Communication signal (CONTDISP)

Input

Ignition switch ON

When adjusting display brightness.

PKIB5039J

13 (BR) 14 (LG)

Ground

Inverter GND

Ignition switch ON Ignition switch ON

0V

Ground

Signal GND

0V

15 (L)

4 (P)

Composite image signal

Input

Ignition switch ON

When AUX image is displayed

SKIB2251J

17 (G)

Ground

RGB signal (R: red)

Input

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2238J

18 (Y)

Ground

RGB signal (B: blue)

Input

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
SKIB2237J

Revision: 2009 September

AV-200

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

19 (B)

Ground

RGB synchronizing signal

Input

SKIB3603E

20 (R)

Ground

Vertical synchronizing (VP) signal

Output

Ignition switch On

F
SKIB3598E

21

Shield

22 (G)

Ground

Communication signal (DISPCONT)

Output

Ignition switch ON

When adjusting display brightness.

I
PKIB5039J

23

Shield

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528584

AV

Revision: 2009 September

AV-201

2010 Murano

FRONT DISPLAY UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM3177GB

Revision: 2009 September

AV-202

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3178GB

Revision: 2009 September

AV-203

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3179GB

Revision: 2009 September

AV-204

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3180GB

Revision: 2009 September

AV-205

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3181GB

Revision: 2009 September

AV-206

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3182GB

Revision: 2009 September

AV-207

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3183GB

Revision: 2009 September

AV-208

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3184GB

Revision: 2009 September

AV-209

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3185GB

Revision: 2009 September

AV-210

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3186GB

Revision: 2009 September

AV-211

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3187GB

Revision: 2009 September

AV-212

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3188GB

Revision: 2009 September

AV-213

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3189GB

Revision: 2009 September

AV-214

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3190GB

Revision: 2009 September

AV-215

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3191GB

Revision: 2009 September

AV-216

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3192GB

Revision: 2009 September

AV-217

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3193GB

Revision: 2009 September

AV-218

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528585

Revision: 2009 September

AV-219

2010 Murano

FRONT DISPLAY UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1872GB

Revision: 2009 September

AV-220

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1873GB

Revision: 2009 September

AV-221

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1874GB

Revision: 2009 September

AV-222

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1875GB

Revision: 2009 September

AV-223

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1876GB

Revision: 2009 September

AV-224

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3195GB

Revision: 2009 September

AV-225

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3196GB

Revision: 2009 September

AV-226

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3197GB

Revision: 2009 September

AV-227

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3198GB

Revision: 2009 September

AV-228

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3199GB

Revision: 2009 September

AV-229

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3200GB

Revision: 2009 September

AV-230

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3201GB

Revision: 2009 September

AV-231

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3202GB

Revision: 2009 September

AV-232

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3203GB

Revision: 2009 September

AV-233

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3204GB

Revision: 2009 September

AV-234

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3205GB

Revision: 2009 September

AV-235

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3206GB

Revision: 2009 September

AV-236

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3207GB

Revision: 2009 September

AV-237

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3208GB

Revision: 2009 September

AV-238

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3209GB

Revision: 2009 September

AV-239

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3210GB

Revision: 2009 September

AV-240

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528586

BOSE AMP.
Reference Values
TERMINAL LAYOUT

JSNIA1223ZZ

PHYSICAL VALUES
F
Terminal (Wire color) + Description Signal name Input/ Output Condition Reference value (Approx.)

H
1 (LG) 2 (V) Sound signal front squawker LH Output Ignition switch ON Sound output.

I
SKIB3609E

J
4 (P) 3 (L) Sound signal front squawker RH Ignition switch ON

Output

Sound output.

SKIB3609E

5 (Y)

6 (BR)

Sound signal rear speaker RH

Output

Ignition switch ON

M
Sound output.

AV
SKIB3609E

7 (B) 10 (SB) 11 (GR) 12 (B)

Ground

Ground

Ignition switch ON Ignition switch OFF Ignition switch OFF Ignition switch ON

0V

Ground

Battery power supply

Input

Battery voltage

Ground

Battery power supply

Input

Battery voltage

Ground

Ground

0V

Revision: 2009 September

AV-241

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

13 (GR)

8 (BR)

Sound signal rear speaker LH

Output

Ignition switch ON

Sound output.

SKIB3609E

14 (L)

9 (O)

Sound signal rear door speaker RH

Output

Ignition switch ON

Sound output.

SKIB3609E

16 (B/R)

17 (W/R)

Sound signal woofer

Output

Ignition switch ON

Sound output.

SKIB3609E

18 (W)

19 (B)

Sound signal front door speaker LH

Output

Ignition switch ON

Sound output.

SKIB3609E

20 (SB) 21 22 (W)

Ground Ground

Amp. ON signal Shield Woofer Amp. ON signal

Input Output

Ignition switch ACC Ignition switch ACC

12.0 V 12.0 V

24 (GR/V)

23 (W/L)

Sound signal rear LH

Input

Ignition switch ON

Sound output.

SKIB3609E

Revision: 2009 September

AV-242

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

26 (GR/V)

25 (W/L)

Sound signal rear RH

Input

Sound output.

SKIB3609E

28 (G)

15 (R)

Sound signal rear door speaker LH

Output

Ignition switch ON

E
Sound output.

F
SKIB3609E

G
29 (V) 30 (P) Sound signal center speaker Output Ignition switch ON Sound output.

SKIB3609E

31 (BR)

32 (Y)

Sound signal front door speaker RH

Output

Ignition switch ON

J
Sound output.

K
SKIB3609E

L
33 (W/R) 34 (B/R) Sound signal front RH Input Ignition switch ON Sound output.

M
SKIB3609E

AV
Ignition switch ON

35 (W/R)

36 (B/R)

Sound signal front LH

Input

Sound output.

SKIB3609E

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528587

Revision: 2009 September

AV-243

2010 Murano

BOSE AMP.
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM3177GB

Revision: 2009 September

AV-244

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3178GB

Revision: 2009 September

AV-245

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3179GB

Revision: 2009 September

AV-246

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3180GB

Revision: 2009 September

AV-247

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3181GB

Revision: 2009 September

AV-248

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3182GB

Revision: 2009 September

AV-249

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3183GB

Revision: 2009 September

AV-250

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3184GB

Revision: 2009 September

AV-251

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3185GB

Revision: 2009 September

AV-252

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3186GB

Revision: 2009 September

AV-253

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3187GB

Revision: 2009 September

AV-254

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3188GB

Revision: 2009 September

AV-255

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3189GB

Revision: 2009 September

AV-256

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3190GB

Revision: 2009 September

AV-257

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3191GB

Revision: 2009 September

AV-258

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3192GB

Revision: 2009 September

AV-259

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3193GB

Revision: 2009 September

AV-260

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528588

Revision: 2009 September

AV-261

2010 Murano

BOSE AMP.
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1872GB

Revision: 2009 September

AV-262

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1873GB

Revision: 2009 September

AV-263

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1874GB

Revision: 2009 September

AV-264

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1875GB

Revision: 2009 September

AV-265

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1876GB

Revision: 2009 September

AV-266

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3195GB

Revision: 2009 September

AV-267

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3196GB

Revision: 2009 September

AV-268

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3197GB

Revision: 2009 September

AV-269

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3198GB

Revision: 2009 September

AV-270

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3199GB

Revision: 2009 September

AV-271

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3200GB

Revision: 2009 September

AV-272

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3201GB

Revision: 2009 September

AV-273

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3202GB

Revision: 2009 September

AV-274

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3203GB

Revision: 2009 September

AV-275

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3204GB

Revision: 2009 September

AV-276

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3205GB

Revision: 2009 September

AV-277

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3206GB

Revision: 2009 September

AV-278

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3207GB

Revision: 2009 September

AV-279

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3208GB

Revision: 2009 September

AV-280

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3209GB

Revision: 2009 September

AV-281

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3210GB

Revision: 2009 September

AV-282

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528589

REAR DISPLAY UNIT


Reference Values
TERMINAL LAYOUT

JSNIA1147ZZ

PHYSICAL VALUES
F
Terminal (Wire color) + 1 (B) 2 (B) 3 (Y/R) 4 (Y/R) 5 (R) 6 (V/Y) 8 Description Signal name Input/ Output Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ACC Condition Reference value (Approx.)

Ground

Ground

0V

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Ground

Battery power supply

Input

Headphone mode is ON. Headphone mode is OFF.

Battery voltage

K
4.5 V 0V Battery voltage

Ground

Headphone amp. ON signal

Input

Ground

ACC power supply Shield

Input

9 (V)

Ground

Communication signal (DISPDIST)

Output

Ignition switch ON

Rear seat remote controller operation when AUX or DVD image is displayed on rear displayed.
PKIB5039J

AV

P
Ignition switch ON Rear seat remote controller operation when AUX or DVD image is displayed on rear displayed.
PKIB5039J

10 (LG)

Ground

Communication signal (DISTDISP)

Input

Revision: 2009 September

AV-283

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Ignition switch ON Ignition switch OFF Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

0V

11 (G)

Ground

Ignition signal

Input

3.3 V

12

Shield

13 (G)

Ground

Composite and RGB image synchronizing signal for rear display

Input

Ignition switch ON

When AUX or DVD image is displayed on rear display unit.

SKIB0825E

14 (R)

Ground

Composite image signal

Input

Ignition switch ON

When AUX or DVD image is displayed on rear display unit.

SKIB2251J

When AUX or DVD image is displayed.

0V

15 (B)

Ground

RGB area (YS) signal

Input

Ignition switch ON

Rear seat remote controller operation when AUX or DVD image is displayed on rear display.
PKIB4948J

16

Shield

17 (R)

Ground

Vertical synchronizing (VP) signal

Output

Ignition switch ON

SKIB3598E

18 (W)

Ground

Horizontal synchronizing (HP) signal

Output

Ignition switch ON

SKIB0825E

19 (W/L)

Ground

RGB ground

Ignition switch ON

0V

Revision: 2009 September

AV-284

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
JSNIA1090ZZ

20 (Y/G)

Ground

RGB image signal (B: blue)

Input

21 (Y/L)

Ground

RGB image signal (G: green)

Input

Ignition switch ON

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
JSNIA0984ZZ

G
22 (BR/L) Ground RGB image signal (R: red) Input Ignition switch ON Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
JSNIA0984ZZ

23 24

Shield Shield

J
Ignition switch ON

27 (V)

25 (LG)

Headphone sound signal LH

Input

Headphone sound output.

SKIB3609E

28 (Y)

26 (BR)

Headphone sound signal RH

Input

Ignition switch ON

M
Headphone sound output.

AV
SKIB3609E

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528590

Revision: 2009 September

AV-285

2010 Murano

REAR DISPLAY UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1872GB

Revision: 2009 September

AV-286

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1873GB

Revision: 2009 September

AV-287

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1874GB

Revision: 2009 September

AV-288

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1875GB

Revision: 2009 September

AV-289

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1876GB

Revision: 2009 September

AV-290

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3195GB

Revision: 2009 September

AV-291

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3196GB

Revision: 2009 September

AV-292

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3197GB

Revision: 2009 September

AV-293

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3198GB

Revision: 2009 September

AV-294

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3199GB

Revision: 2009 September

AV-295

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3200GB

Revision: 2009 September

AV-296

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3201GB

Revision: 2009 September

AV-297

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3202GB

Revision: 2009 September

AV-298

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3203GB

Revision: 2009 September

AV-299

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3204GB

Revision: 2009 September

AV-300

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3205GB

Revision: 2009 September

AV-301

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3206GB

Revision: 2009 September

AV-302

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3207GB

Revision: 2009 September

AV-303

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3208GB

Revision: 2009 September

AV-304

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3209GB

Revision: 2009 September

AV-305

2010 Murano

REAR DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3210GB

Revision: 2009 September

AV-306

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528591

VIDEO DISTRIBUTOR
Reference Values
TERMINAL LAYOUT

JSNIA0985ZZ

PHYSICAL VALUES
F
Terminal (Wire color) + 1 (R) 2 (G) 3 (R) 4 (L) Description Signal name AV communication signal (H) AV communication signal (L) AV communication signal (H) AV communication signal (L) Input/ Output Input/ Output Input/ Output Input/ Output Input/ Output Condition Reference value (Approx.)

8 (L)

6 (R)

Composite image signal for AV control unit

Output

Ignition switch ON

When AUX or DVD image is displayed on front display unit.

L
SKIB2251J

15 (B) 16 (B)

Ground

Ground

Ignition switch ON Ignition switch ON

0V

Ground

Ground

0V

AV

19 (G)

Ground

AUX image signal

Input

Ignition switch ON

O
When AUX image is displayed.

P
SKIB2251J

21 22

Shield (AUX image GND) Shield (DVD image GND)

Revision: 2009 September

AV-307

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

23 (P)

Ground

DVD image signal

Input

Ignition switch ON

When DVD image is displayed.

SKIB2251J

25 (R)

Ground

RGB image signal (R: red) for rear display unit

Output

Ignition switch ON

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
JSNIA0984ZZ

26 (L)

Ground

RGB image signal (G: green) for rear display unit

Output

Ignition switch ON

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
JSNIA0984ZZ

27 (W)

Ground

RGB ground for rear display unit

Ignition switch ON

0V

28 (G)

Ground

RGB image signal (B: blue) for rear display unit

Output

Ignition switch ON

Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
JSNIA1090ZZ

29 (R)

Ground

Vertical synchronizing (VP) signal for rear display unit

Input

Ignition switch ON

SKIB3598E

30 (W)

Ground

Horizontal synchronizing (HP) signal for rear display

Input

Ignition switch ON

SKIB0825E

31

Shield

Revision: 2009 September

AV-308

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

When AUX or DVD image is displayed on rear display unit. Ignition switch ON

B
0V

C
32 (B) Ground RGB area (YS) signal for rear display Output Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
PKIB4948J

33 (G)

Ground

Composite and RGB image synchronizing signal for rear display

Output

Ignition switch ON

When AUX or DVD image is displayed on rear display unit.

G
SKIB0825E

H
34 (R) Ground Composite image signal for rear display unit Output Ignition switch ON When AUX or DVD image is displayed on rear display unit.

I
SKIB2251J

35

Shield

Ignition switch ON Ignition switch OFF

0V

36 (G)

Ground

Ignition signal

Output

3.3 V

38

Shield

M
39 (V) Ground Communication signal (DISPDIST) Input Ignition switch ON Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
PKIB5039J

AV

O
Rear seat remote controller operation when AUX or DVD image is displayed on rear display unit.
PKIB5039J

40 (LG)

Ground

Communication signal (DISTDISP)

Output

Ignition switch ON

51 (B)

Ground

Ground

Ignition switch ON

0V

Revision: 2009 September

AV-309

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 53 (B) 54 (Y) 55 (V) 56 (G) 60 (R) Description Signal name Input/ Output Ignition switch ON Ignition switch OFF Ignition switch ACC Ignition switch ON Ignition switch ON Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Ground

ACC power supply

Input

Battery voltage

Ground

Ignition signal

Input

Headphone mode is ON. Headphone mode is OFF.

Battery voltage 4.5 V 0V

Ground

Headphone amp. ON signal

Output

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528592

Revision: 2009 September

AV-310

2010 Murano

VIDEO DISTRIBUTOR
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1872GB

Revision: 2009 September

AV-311

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1873GB

Revision: 2009 September

AV-312

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1874GB

Revision: 2009 September

AV-313

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1875GB

Revision: 2009 September

AV-314

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1876GB

Revision: 2009 September

AV-315

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3195GB

Revision: 2009 September

AV-316

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3196GB

Revision: 2009 September

AV-317

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3197GB

Revision: 2009 September

AV-318

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3198GB

Revision: 2009 September

AV-319

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3199GB

Revision: 2009 September

AV-320

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3200GB

Revision: 2009 September

AV-321

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3201GB

Revision: 2009 September

AV-322

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3202GB

Revision: 2009 September

AV-323

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3203GB

Revision: 2009 September

AV-324

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3204GB

Revision: 2009 September

AV-325

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3205GB

Revision: 2009 September

AV-326

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3206GB

Revision: 2009 September

AV-327

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3207GB

Revision: 2009 September

AV-328

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3208GB

Revision: 2009 September

AV-329

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3209GB

Revision: 2009 September

AV-330

2010 Murano

VIDEO DISTRIBUTOR
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3210GB

Revision: 2009 September

AV-331

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

DVD PLAYER
Reference Values
TERMINAL LAYOUT
INFOID:0000000005528593

JSNIA1147ZZ

PHYSICAL VALUES
Terminal (Wire color) + 1 (B) 2 (Y) 4 (V) 5 Description Signal name Input/ Output Ignition switch ON Ignition switch OFF Ignition switch ACC Condition

Reference value (Approx.)

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Ground

ACC power supply Shield (DVD image GND)

Input

Battery voltage

7 (P)

Ground

DVD image signal

Output

Ignition switch ON

When DVD image is displayed.

SKIB2251J

13 (G)

11 (B)

AUX sound signal RH

Input

Ignition switch ON

AUX sound output.

SKIB3609E

14 (R)

12 (W)

AUX sound signal RH

Input

Ignition switch ON

AUX sound output.

SKIB3609E

16

Shield

Revision: 2009 September

AV-332

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

17 (G)

18 (R)

Headphone sound signal LH

Output

Headphone sound output.

SKIB3609E

19 (V)

20 (LG)

Headphone sound signal RH

Output

Ignition switch ON

E
Headphone sound output.

F
SKIB3609E

G
21 (B) 22 (G) Sound signal LH (DVD and AUX sound) Output Ignition switch ON DVD or AUX sound output.

SKIB3609E

23 (R)

24 (W)

Sound signal RH (DVD and AUX sound)

Output

Ignition switch ON

J
DVD or AUX sound output.

K
SKIB3609E

29 (L) 30 (R) 31 (L) 32 (R)

AV communication signal (L) AV communication signal (H) AV communication signal (L) AV communication signal (H)

Input/ Output Input/ Output Input/ Output Input/ Output

AV

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528594

Revision: 2009 September

AV-333

2010 Murano

DVD PLAYER
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1872GB

Revision: 2009 September

AV-334

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1873GB

Revision: 2009 September

AV-335

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1874GB

Revision: 2009 September

AV-336

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1875GB

Revision: 2009 September

AV-337

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1876GB

Revision: 2009 September

AV-338

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3195GB

Revision: 2009 September

AV-339

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3196GB

Revision: 2009 September

AV-340

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3197GB

Revision: 2009 September

AV-341

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3198GB

Revision: 2009 September

AV-342

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3199GB

Revision: 2009 September

AV-343

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3200GB

Revision: 2009 September

AV-344

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3201GB

Revision: 2009 September

AV-345

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3202GB

Revision: 2009 September

AV-346

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3203GB

Revision: 2009 September

AV-347

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3204GB

Revision: 2009 September

AV-348

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3205GB

Revision: 2009 September

AV-349

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3206GB

Revision: 2009 September

AV-350

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3207GB

Revision: 2009 September

AV-351

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3208GB

Revision: 2009 September

AV-352

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3209GB

Revision: 2009 September

AV-353

2010 Murano

DVD PLAYER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3210GB

Revision: 2009 September

AV-354

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528595

SATELLITE RADIO TUNER


Reference Values

JPNIA0010ZZ

PHYSICAL VALUES
F
Terminal + Description Signal name Input/ Output Condition Reference value (Approx.)

2 (Y/L)

1 (W/L)

Satellite radio sound signal LH

Output

Ignition switch ON

H
When satellite radio mode is selected

I
SKIB3609E

J
4 (BR/L) 3 (Y/G) Satellite radio sound signal RH Output Ignition switch ON When satellite radio mode is selected

SKIB3609E

5 6

Shield Shield

M
Ignition switch ON

8 (R/W)

Ground

Request signal (SATCONT)

Output

When satellite radio mode is selected

AV

SKIA9299J

9 (R/L)

Ground

Communication signal (SATCONT)

Output

Ignition switch ON

P
When satellite radio mode is selected

SKIA9300J

Revision: 2009 September

AV-355

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION >
Terminal + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

10 (B)

Ground

Communication signal (CONTSAT)

Input

Ignition switch ON

When satellite radio mode is selected

SKIA9301J

12 (V) 15 (B) 16 (GR) 33

Ground

Battery power supply

Input

Ignition switch OFF Ignition switch ON Ignition switch ACC

Battery voltage

Ground

Ground

0V

Ground

ACC power supply Satellite antenna

Input Input

Battery voltage

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528596

Revision: 2009 September

AV-356

2010 Murano

SATELLITE RADIO TUNER


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM3177GB

Revision: 2009 September

AV-357

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3178GB

Revision: 2009 September

AV-358

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3179GB

Revision: 2009 September

AV-359

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3180GB

Revision: 2009 September

AV-360

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3181GB

Revision: 2009 September

AV-361

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3182GB

Revision: 2009 September

AV-362

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3183GB

Revision: 2009 September

AV-363

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3184GB

Revision: 2009 September

AV-364

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3185GB

Revision: 2009 September

AV-365

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3186GB

Revision: 2009 September

AV-366

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3187GB

Revision: 2009 September

AV-367

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3188GB

Revision: 2009 September

AV-368

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3189GB

Revision: 2009 September

AV-369

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3190GB

Revision: 2009 September

AV-370

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3191GB

Revision: 2009 September

AV-371

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3192GB

Revision: 2009 September

AV-372

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3193GB

Revision: 2009 September

AV-373

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528597

Revision: 2009 September

AV-374

2010 Murano

SATELLITE RADIO TUNER


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1872GB

Revision: 2009 September

AV-375

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1873GB

Revision: 2009 September

AV-376

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1874GB

Revision: 2009 September

AV-377

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1875GB

Revision: 2009 September

AV-378

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1876GB

Revision: 2009 September

AV-379

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3195GB

Revision: 2009 September

AV-380

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3196GB

Revision: 2009 September

AV-381

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3197GB

Revision: 2009 September

AV-382

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3198GB

Revision: 2009 September

AV-383

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3199GB

Revision: 2009 September

AV-384

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3200GB

Revision: 2009 September

AV-385

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3201GB

Revision: 2009 September

AV-386

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3202GB

Revision: 2009 September

AV-387

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3203GB

Revision: 2009 September

AV-388

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3204GB

Revision: 2009 September

AV-389

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3205GB

Revision: 2009 September

AV-390

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3206GB

Revision: 2009 September

AV-391

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3207GB

Revision: 2009 September

AV-392

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3208GB

Revision: 2009 September

AV-393

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3209GB

Revision: 2009 September

AV-394

2010 Murano

SATELLITE RADIO TUNER


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3210GB

Revision: 2009 September

AV-395

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

IPOD ADAPTER
Reference Values
TERMINAL LAYOUT
INFOID:0000000005528598

JSNIA0618ZZ

PHYSICAL VALUES
Terminal (Wire color) + Description Signal name Input/ Output Condition

Reference value (Approx.)

1 (BR)

13 (L)

iPod sound signal LH

Output

Ignition switch ON

When iPod mode is selected.

SKIB3609E

2 (R)

14 (W)

iPod sound signal RH

Output

Ignition switch ON

When iPod mode is selected.

SKIB3609E

3 (R) 4 (L) 5 (Y) 8 (W)

Ground

ACC power supply AV communication signal (L) Battery power supply

Input Input/ Output Input

Ignition switch ACC Ignition switch OFF Ignition switch ON

Battery voltage

Ground

Battery voltage

Ground

iPod battery charge

Output

Connected to iPod.

12.0 V

Revision: 2009 September

AV-396

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

9 (G)

Ground

Communication signal (iPod adapteriPod)

Output

Ignition switch ON

The wave pattern is displayed just after iPod connection.


JPNIA0462GB

NOTE: After the wave pattern display, the value continues Approx 3.3 V

10 (R)

Ground

Communication signal (iPod iPod adapter)

Input

Ignition switch ON

Connected to iPod.

G
JPNIA0462GB

11 (R)

Ground

ACCESSORY-IDENTIFY

Ignition switch ON

Connected to iPod.

0V

I
12 (V) 23 (R) iPod sound signal RH Input Ignition switch ON When iPod mode is selected.

J
SKIB3609E

15 16 (R) 17 19 21 (L) 22 (BR)

Shield AV communication signal (H) Ground Shield iPod connection recognition signal

Input/ Output Input

Ignition switch ON Ignition switch ON Ignition switch ON

L
Not connected to iPod. 0V 4.0 V 0V 0V

Ground Ground

Connected to iPod. Connected to iPod.

AV

Ground

ACCESSORY-DETECT

24 (LG)

23 (R)

iPod sound signal LH

Input

Ignition switch ON

When iPod mode is selected.

SKIB3609E

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERRevision: 2009 September

AV-397

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
INFOID:0000000005528599

TAINMENT SYSTEM -

NOTE: In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM3177GB

Revision: 2009 September

AV-398

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3178GB

Revision: 2009 September

AV-399

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3179GB

Revision: 2009 September

AV-400

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3180GB

Revision: 2009 September

AV-401

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3181GB

Revision: 2009 September

AV-402

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3182GB

Revision: 2009 September

AV-403

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3183GB

Revision: 2009 September

AV-404

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3184GB

Revision: 2009 September

AV-405

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3185GB

Revision: 2009 September

AV-406

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3186GB

Revision: 2009 September

AV-407

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3187GB

Revision: 2009 September

AV-408

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3188GB

Revision: 2009 September

AV-409

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3189GB

Revision: 2009 September

AV-410

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3190GB

Revision: 2009 September

AV-411

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3191GB

Revision: 2009 September

AV-412

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3192GB

Revision: 2009 September

AV-413

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3193GB

Revision: 2009 September

AV-414

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528600

Revision: 2009 September

AV-415

2010 Murano

IPOD ADAPTER
[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1872GB

Revision: 2009 September

AV-416

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1873GB

Revision: 2009 September

AV-417

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1874GB

Revision: 2009 September

AV-418

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1875GB

Revision: 2009 September

AV-419

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1876GB

Revision: 2009 September

AV-420

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3195GB

Revision: 2009 September

AV-421

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3196GB

Revision: 2009 September

AV-422

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3197GB

Revision: 2009 September

AV-423

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3198GB

Revision: 2009 September

AV-424

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3199GB

Revision: 2009 September

AV-425

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3200GB

Revision: 2009 September

AV-426

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3201GB

Revision: 2009 September

AV-427

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3202GB

Revision: 2009 September

AV-428

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3203GB

Revision: 2009 September

AV-429

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3204GB

Revision: 2009 September

AV-430

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3205GB

Revision: 2009 September

AV-431

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3206GB

Revision: 2009 September

AV-432

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3207GB

Revision: 2009 September

AV-433

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3208GB

Revision: 2009 September

AV-434

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3209GB

Revision: 2009 September

AV-435

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3210GB

Revision: 2009 September

AV-436

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528601

TEL ADAPTER UNIT


Reference Values

JPNIA0011ZZ

PHYSICAL VALUES
F
Terminal (Wire color) + 1 (V) 2 (GR) 3 (R) 4 (B/W) 5 6 Description Signal name Input/ Output Input Ignition switch OFF Ignition switch ACC Ignition switch ON Ignition switch ON Condition Reference value (Approx.)

Ground

Battery power supply

Battery voltage

Ground

ACC power supply

Input

Battery voltage

Ground

Ignition signal

Input

Battery voltage

Ground

ground Shield Shield

0V

7 (R/w)

8 (R/L)

Microphone signal

Input

Ignition switch ON

Give a voice

AV
PKIB5037J

8 (R/L)

Ground

Microphone GND

Ignition switch ON

0V

9 (B/R)

10 (W/R)

TEL voice signal

Output

Ignition switch ON

During voice guide output with the pressed switch

SKIB3609E

Revision: 2009 September

AV-437

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 14 (B) 20 (B) 24 (B/W) Description Signal name Input/ Output Ignition switch ON Ignition switch ON Ignition switch ON Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

Ground

GND

0V

Ground

Control signal

Input

0V

Ground

Control signal

Input

0V NOTE: Maximum voltage may be 12 V due to specifications (connected units).

28 (BR)

Ground

Vehicle speed signal (8-pulse)

Input

Ignition switch ON

When vehicle speed is approx. 40 km/h (25MPH)

SKIA6649J

29 (B) 33 34 35 (Y) 36 (BR) 40 (G) 42 (GR)

Ground

Microphone VCC TEL antenna Shield AV communication signal (H) AV communication signal (L) AV communication signal (H) AV communication signal (L)

Output Input Input/ Output Input/ Output Input/ Output Input/ Output

Ignition switch ON

5.0 V

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528602

Revision: 2009 September

AV-438

2010 Murano

TEL ADAPTER UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM3177GB

Revision: 2009 September

AV-439

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3178GB

Revision: 2009 September

AV-440

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3179GB

Revision: 2009 September

AV-441

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3180GB

Revision: 2009 September

AV-442

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3181GB

Revision: 2009 September

AV-443

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3182GB

Revision: 2009 September

AV-444

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3183GB

Revision: 2009 September

AV-445

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3184GB

Revision: 2009 September

AV-446

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3185GB

Revision: 2009 September

AV-447

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3186GB

Revision: 2009 September

AV-448

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3187GB

Revision: 2009 September

AV-449

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3188GB

Revision: 2009 September

AV-450

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3189GB

Revision: 2009 September

AV-451

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3190GB

Revision: 2009 September

AV-452

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3191GB

Revision: 2009 September

AV-453

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3192GB

Revision: 2009 September

AV-454

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3193GB

Revision: 2009 September

AV-455

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528603

Revision: 2009 September

AV-456

2010 Murano

TEL ADAPTER UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1872GB

Revision: 2009 September

AV-457

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1873GB

Revision: 2009 September

AV-458

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1874GB

Revision: 2009 September

AV-459

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1875GB

Revision: 2009 September

AV-460

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1876GB

Revision: 2009 September

AV-461

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3195GB

Revision: 2009 September

AV-462

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3196GB

Revision: 2009 September

AV-463

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3197GB

Revision: 2009 September

AV-464

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3198GB

Revision: 2009 September

AV-465

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3199GB

Revision: 2009 September

AV-466

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3200GB

Revision: 2009 September

AV-467

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3201GB

Revision: 2009 September

AV-468

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3202GB

Revision: 2009 September

AV-469

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3203GB

Revision: 2009 September

AV-470

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3204GB

Revision: 2009 September

AV-471

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3205GB

Revision: 2009 September

AV-472

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3206GB

Revision: 2009 September

AV-473

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3207GB

Revision: 2009 September

AV-474

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3208GB

Revision: 2009 September

AV-475

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3209GB

Revision: 2009 September

AV-476

2010 Murano

TEL ADAPTER UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3210GB

Revision: 2009 September

AV-477

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

CAMERA CONTROL UNIT


Reference Values
TERMINAL LAYOUT
INFOID:0000000005528604

JPNIA0007ZZ

PHYSICAL VALUES
Terminal (Wire color) + 5 Shield Description Signal name Input/ Output Condition

Reference value (Approx.)

6 (B)

Ground

Camera image signal

Input

Ignition switch ON

when rear view camera image is displayed.

SKIB2251J

7 (R/W) 8 (R/L)

Ground

Rear view camera ground

Ignition switch ON Ignition switch ON Ignition switch ON R position.

0V 6.0 V 0V 0V

Ground

Camera ON signal

Output

Other than R position.

11

Ground

Shield (camera image ground

12 (B)

11

Camera image signal

Output

Ignition switch ON

when rear view camera image is displayed.

SKIB2251J

14 (L) 17 (BR) 18 (Y)

Ground

Camera-connection recognition signal AV communication signal (L) AV communication signal (H)

Output

Ignition switch ON

Connected to camera control unit connector. Not connected to camera control unit connector.

0V 5.0 V

Input/ Output Input/ Output

Revision: 2009 September

AV-478

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 19 (GR) 20 (G) 22 (R) Description Signal name AV communication signal (L) AV communication signal (H) Reverse signal Input/ Output Input/ Output Input/ Output Input Ignition switch ON R position. Other than R position. Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

12.0 V 0V

Ground

E
Turn the steering to the right.

F
SKIB3827E

23 (G)

Ground

Sensor signal 1

Input

Ignition switch ON

A: Sensor signal 1 B: Sensor signal 2

H
Turn the steering to the left.

I
SKIB3828E

A: Sensor signal 1 B: Sensor signal 2

K
Turn the steering to the right.
SKIB3827E

24 (SB)

Ground

Sensor signal 2

Input

Ignition switch ON

A: Sensor signal 1 B: Sensor signal 2

AV
Turn the steering to the left.

SKIB3828E

A: Sensor signal 1 B: Sensor signal 2

Revision: 2009 September

AV-479

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITHOUT NAVIGATION]


Reference value (Approx.)

25 (O)

Ground

Sensor signal 3

Input

Ignition switch ON

Turn the steering around the neutral position.


SKIB3829E

A: Sensor signal 3 B: Sensor signal 1 NOTE: Maximum voltage may be 12 V due to specifications (connected units). 26 (BR) Ground Vehicle speed signal (8-pulse) Input Ignition switch ON When vehicle speed is approx. 40 km/h (25 MPH).

SKIA6649J

30 (GR) 31 (B) 32 (V)

Ground

ACC power supply

Input

Ignition switch ACC Ignition switch ON Ignition switch OFF

Battery voltage

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITHOUT DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528605

Revision: 2009 September

AV-480

2010 Murano

CAMERA CONTROL UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM3177GB

Revision: 2009 September

AV-481

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3178GB

Revision: 2009 September

AV-482

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3179GB

Revision: 2009 September

AV-483

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3180GB

Revision: 2009 September

AV-484

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3181GB

Revision: 2009 September

AV-485

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3182GB

Revision: 2009 September

AV-486

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3183GB

Revision: 2009 September

AV-487

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3184GB

Revision: 2009 September

AV-488

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3185GB

Revision: 2009 September

AV-489

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3186GB

Revision: 2009 September

AV-490

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3187GB

Revision: 2009 September

AV-491

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3188GB

Revision: 2009 September

AV-492

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3189GB

Revision: 2009 September

AV-493

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3190GB

Revision: 2009 September

AV-494

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3191GB

Revision: 2009 September

AV-495

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3192GB

Revision: 2009 September

AV-496

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3193GB

Revision: 2009 September

AV-497

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3194GB

Wiring Diagram - BOSE AUDIO WITHOUT NAVIGATION WITH DVD ENTERTAINMENT SYSTEM NOTE:

INFOID:0000000005528606

Revision: 2009 September

AV-498

2010 Murano

CAMERA CONTROL UNIT


[BOSE AUDIO WITHOUT NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1872GB

Revision: 2009 September

AV-499

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1873GB

Revision: 2009 September

AV-500

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1874GB

Revision: 2009 September

AV-501

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM1875GB

Revision: 2009 September

AV-502

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM1876GB

Revision: 2009 September

AV-503

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3195GB

Revision: 2009 September

AV-504

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3196GB

Revision: 2009 September

AV-505

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3197GB

Revision: 2009 September

AV-506

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3198GB

Revision: 2009 September

AV-507

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3199GB

Revision: 2009 September

AV-508

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3200GB

Revision: 2009 September

AV-509

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3201GB

Revision: 2009 September

AV-510

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3202GB

Revision: 2009 September

AV-511

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3203GB

Revision: 2009 September

AV-512

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3204GB

Revision: 2009 September

AV-513

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3205GB

Revision: 2009 September

AV-514

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3206GB

Revision: 2009 September

AV-515

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3207GB

Revision: 2009 September

AV-516

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3208GB

Revision: 2009 September

AV-517

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]

JCNWM3209GB

Revision: 2009 September

AV-518

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

AV

O
JCNWM3210GB

Revision: 2009 September

AV-519

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

SYMPTOM DIAGNOSIS
MULTI AV SYSTEM SYMPTOMS
Symptom Table
OPERATION
Symptoms Check items All switches cannot be operated. MULTI AV is displayed on system selection screen when the CONSULT-III is started. Multifunction switch and preset switch operation does not work. All switches cannot be operated. MULTI AV is not displayed on system selection screen when the CONSULT-III is started. Only specified switch cannot be operated. Possible malfunction location / Action to take Multifunction switch power supply and ground circuit. AV communication circuit between AV control unit and multifunction switch. Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". AV control unit power supply and ground circuit malfunction. Refer to AV-107, "AV CONTROL UNIT : Diagnosis Procedure". Multifunction switch or preset switch malfunction. Replace multifunction switch AV-546, "Exploded View" or preset switch AV-547, "Exploded View".
INFOID:0000000005528607

RELATED TO HANDS-FREE PHONE


Basic Inspection

Check that the cellular phone is a corresponding type (Bluetooth correspondence) when the hands-free related malfunction vehicle is in service before performing a diagnosis. There is a case that malfunction occurs due to the version change of the phone type, etc. even though it is a corresponding type. Therefore, confirm it by changing the cellular phone to another corresponding type phone, and check that it operates normally. It is necessary to distinguish whether the cause is the vehicle or cellular phone.
Simple check for Bluetooth communication

If cellular phone and AV control unit cannot be connected with Bluetooth communication, the following procedure allows the technician to judge which device has a malfunction. 1. 2. 3. 4. Turn on the cellular phone, not connecting Bluetooth communication. Start CONSULT-III, then start Windows. Set CONSULT-III near the cellular phone.

When operating Bluetooth registration by cellular phone, check if CONSULT-III* is displayed on the device name. (If another Bluetooth device is located near the cellular phone, the name of the device will also be displayed.) NOTE: *:Displayed device name is NISSAN. If no device name is displayed, cellular phone is malfunctioning. Repair the cellular phone first, then perform diagnosis. If CONSULT-III is displayed on device name, cellular phone is normal. Perform diagnosis as per the following table.

JPNIA0441GB

On board self-diagnosis of hands-free phone system Always perform the on board self-diagnosis at first after completing the basic inspection when the malfunction is detected on the hands-free phone system. Narrow down possible causes using the Diagnosis Chart if there is no malfunction in the on board self-diagnosis. Trouble diagnosis chart by symptom

Revision: 2009 September

AV-520

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Does not recognize cellular phone connection. (No connection is displayed on the display at the guide.) Check items

[BOSE AUDIO WITHOUT NAVIGATION]


Probable malfunction location TEL adapter unit malfunction. Refer to AV-559, "Exploded View". Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". No malfunction. TEL adapter unit malfunction. Refer to AV-559, "Exploded View". TEL voice signal circuit malfunction between TEL adapter unit and AV control unit. Control signal circuit. Refer to AV-139, "Diagnosis Procedure". TEL adapter unit. Refer to AV-559, "Exploded View". Microphone signal circuit. Refer to AV-137, "Diagnosis Procedure".

Repeat the registration of cellular phone.

Hands-free phone cannot be established.

Both the reception and the speech cannot be performed

The other party's voice cannot be heard by hands-free phone.

The operation of the be performed. The operation of the not be performed.

switch can

switch can-

Originating sound is not heard by the other party with handsfree phone communication.

Sound operation function is normal. Sound operation function does not work.

RELATED TO CAMERA
Trouble diagnosis chart by symptom

G
Check items Probable malfunction location Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". Camera image signal circuit between camera control unit and rear view camera. Refer to AV-140, "Diagnosis Procedure". Rear view camera ON signal circuit. Refer to AV-141, "Diagnosis Procedure". Perform detected DTC self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". Camera image signal circuit malfunction between camera control unit and AV control unit. Refer to AV-142, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between AV control unit and front display unit. Refer to AV-119, "Diagnosis Procedure". Composite image signal circuits malfunction between AV control unit and front display unit. Refer to AV-122, "Diagnosis Procedure". Reverse signal circuit malfunction (camera control unit).

Symptoms

Camera image is not displayed (displayed in black and nothing can be displayed).

For front display unit, AUX image is not displayed.

Camera image is not shown. (Vehicle width and possible route line is displayed.)

There is malfunction in the CONSULT-III self-diagnosis result. For front display unit, AUX image is normal. Camera image is not displayed. (Only warning message under area is displayed.)

For front display unit, AUX image is not displayed.

AV

Select Camera Cont. of Confirmation/ Adjustment mode, Reverse Sensor is not turned ON at Connection Confirmation.

O
Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure".

Camera image is rolling.

For front display unit, AUX image is also rolling.

Revision: 2009 September

AV-521

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Check items Malfunction of self-diagnosis result is indicated. Malfunction of self-diagnosis result is not indicated. Possible route line is indicated abnormally when camera image is displayed.

[BOSE AUDIO WITHOUT NAVIGATION]


Probable malfunction location Camera-connection recognition signal circuit malfunction between AV control unit and camera control unit. Refer to AV-102, "Diagnosis Procedure". Reverse signal circuit malfunction (AV control unit). Steering angle sensor signal circuit malfunction. Refer to AV-143, "Diagnosis Procedure".

Camera image does not switch.

RELATED TO RGB IMAGE (FRONT DISPLAY UNIT)


Trouble diagnosis chart by symptom

Symptoms

Check items All RGB images are not shown. MULTI AV is displayed on system selection screen when the CONSULT-III is started. All RGB images are not shown. MULTI AV is not displayed on system selection screen when the CONSULTIII is started. Light blue (Cyan) tint.

Possible malfunction location / Action to take Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". AV control unit power supply and ground circuit malfunction. Refer to AV-107, "AV CONTROL UNIT : Diagnosis Procedure". RGB signal (R: red) circuit malfunction between AV control unit and front display unit. Refer to AV-115, "Diagnosis Procedure". RGB signal (G: green) circuit malfunction between AV control unit and front display unit. Refer to AV-116, "Diagnosis Procedure". RGB signal (B: blue) circuit malfunction between AV control unit and front display unit. Refer to AV-117, "Diagnosis Procedure". RGB synchronizing signal circuit malfunction between AV control unit and front display unit. Refer to AV-118, "Diagnosis Procedure".

RGB image is not shown.

Color of RGB image is not proper.

Purple (Magenta) tint.

Screen looks yellowish.

RGB screen is rolling.

Front display unit, AUX and DVD image are normal.

RELATED TO REAR DISPLAY


Trouble diagnosis chart by symptom

Symptoms

Check items

Possible malfunction location / Action to take Vertical synchronizing (VP) signal circuit malfunction between video distributor and rear display unit. Refer to AV-130, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between video distributor and rear display unit. Refer to AV-131, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between video distributor and rear display unit. Refer to AV-129, "Diagnosis Procedure". RGB signal (R: red) circuit malfunction between video distributor and rear display unit. Refer to AV-125, "Diagnosis Procedure". RGB signal (G: green) circuit malfunction between video distributor and rear display unit. Refer to AV-126, "Diagnosis Procedure". RGB signal (B: blue) circuit malfunction between video distributor and rear display unit. Refer to AV-127, "Diagnosis Procedure".

The menu screen is not displayed.

For rear display unit, AUX and DVD image are normal.

Light blue (Cyan) tint.

Color of RGB image (menu display screen) is not proper.

Purple (Magenta) tint.

Screen looks yellowish.

Revision: 2009 September

AV-522

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Check items Front display unit is not displayed. AUX and DVD image are not displayed.

[BOSE AUDIO WITHOUT NAVIGATION]


Possible malfunction location / Action to take Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". Composite image signal circuit malfunction between video distributor and rear display unit. Refer to AV-124, "Diagnosis Procedure". Composite synchronizing signal circuit malfunction between video distributor and rear display unit. Refer to AV-128, "Diagnosis Procedure". Perform detected DTC self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)".

Front display unit is normal.

AUX and DVD image are rolling. Rear display unit does not open.

Front display unit displayed, AUX and DVD image are not rolling.

RELATED TO AUDIO
Trouble diagnosis chart by symptom

Symptoms The CD cannot be removed.

Check items

Possible malfunction location / Action to take Disk eject signal circuit. BOSE amp. power supply and ground circuit. Refer to AV-111, "BOSE AMP. : Diagnosis Procedure". Amp. ON signal circuit between AV control unit and BOSE amp. Woofer power supply and ground circuit. Refer to AV-112, "WOOFER : Diagnosis Procedure". Sound signal woofer circuit between BOSE amp. and woofer. Woofer amp. ON signal circuit between BOSE amp. and woofer. Sound signal center speaker circuit.

No sound from all speakers.

There is no Audio sound.

No sound from woofer.

There is no sound from center speaker.

There is sound from only specific places Sound signal circuit of malfunctioning system. (RH front, RH rear, LH front and LH rear). Perform the following inspection procedure. 1. Check antenna base mounting nut for looseness. NOTE: Tightening torque: 6.5 Nm (0.66 kg-m, 58 in-lb.) 2. Visually check for satellite radio antenna feeder. 3. Replace the antenna base. Refer to AV-557, "Exploded View". 4. Replace the satellite radio tuner. Refer to AV-558, "Exploded View". Perform the following inspection procedure. 1. Check the connection between satellite radio tuner and antenna connector. 2. Check the connection between satellite radio antenna and antenna feeder. 3. Check antenna feeder for open circuit. 4. Replace the antenna base. Refer to AV-557, "Exploded View". 5. Replace the satellite radio tuner. Refer to AV-558, "Exploded View". Satellite radio sound signal circuit between AV control unit and satellite radio tuner. Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". Antenna amp. ON signal circuit. Antenna feeder.

ANTENNA is not displayed even when the channel is turned to 0 in Satellite radio mode.

Satellite radio is not received.

ANTENNA is displayed when the channel is turned to 0 in Satellite radio mode.

AV

The sound of satellite radio is not heard. It does not change to satellite radio mode. AM/FM radio is not received.

Other audio sounds are normal. There is malfunction in the CONSULT-III self-diagnosis result. Other audio sounds are normal.

RELATED TO iPod
Connect another iPod and check if the symptom is reproduced or not. If the symptom is reproduced, diagnose the vehicle. If no malfunction is detected, replace the iPod harness. NOTE:
Revision: 2009 September

AV-523

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Trouble diagnosis chart by symptom

[BOSE AUDIO WITHOUT NAVIGATION]

It is unable to check connection between iPod and iPod harness.


Symptoms The iPod does not produce sound. It does not change to iPod mode. iPod is not connected is displayed when it comes to iPod mode. iPod cannot charge the battery. The title of music file in the iPod is not indicated. Accessing the iPod is unavailable from the vehicle. Serial communication circuit between iPod and iPod adapter. Check items Possible malfunction location / Action to take iPod sound signal circuit between AV control unit and iPod adapter. iPod sound signal circuit between iPod and iPod adapter. Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". iPod connection recognition signal circuit between iPod and iPod adapter. iPod battery charge circuit between iPod and iPod adapter.

Other audio sounds are normal.

There is malfunction in the CONSULT-III self-diagnosis. Connected to iPod.

RELATED TO STEERING SWITCH


Trouble diagnosis chart by symptom

Symptoms None of the steering switch operations work. Only specified switch cannot be operated. SOURCE, MENU UP, MENU DOWN, of steering switch are not operational. VOL UP, VOL DOWN, are not operational. switches

Probable malfunction location Steering switch signal GND circuit. Refer to AV-149, "Diagnosis Procedure". Steering switch. Refer to AV-548, "Exploded View". Steering switch signal A circuit. Refer to AV-145, "Diagnosis Procedure". Steering switch signal B circuit. Refer to AV-147, "Diagnosis Procedure".

switches of steering switch

RELATED TO AUXILIARY INPUT (WITHOUT DVD PLAYER MODELS)


NOTE: Check that there is no malfunction of AUX equipment main body before performing a diagnosis.
Trouble diagnosis chart by symptom

Symptoms

Check items

Probable malfunction location Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". Composite image signal circuits malfunction between AV control unit and front display unit. Refer to AV-123, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between AV control unit and front display unit. Refer to AV-119, "Diagnosis Procedure". AUX image signal circuit malfunction between AV control unit and auxiliary input jacks. Refer to AV-132, "WITHOUT DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure".

For front display unit, AUX image is not displayed (Menu display is not displayed, too).

Camera image is not displayed (Also, menu display is not displayed).

For front display unit, AUX image is not displayed (Menu display is normal).

Camera image is not displayed (Menu display is normal).

Camera image is normal.

Revision: 2009 September

AV-524

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Check items

[BOSE AUDIO WITHOUT NAVIGATION]


Probable malfunction location Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". AUX sound signal circuit malfunction between auxiliary input jacks and AV control unit at the side where there is no sound.

For front display unit, AUX image is rolling.

Camera image is rolling.

There is no AUX sound from speaker on the right or left side.

The sound other than AUX sound is normal.

RELATED TO AUXILIARY INPUT (WITH DVD PLAYER MODELS)


NOTE: Check that there is no AUX equipment main body malfunction before performing a diagnosis.
Trouble diagnosis chart by symptom

Symptoms Front display unit and rear display unit, AUX image is not displayed.

Check items DVD image is not displayed.

Probable malfunction location Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". AUX image signal circuit malfunction between auxiliary input jacks and video distributor. Refer to AV-133, "WITH DVD ENTERTAINMENT SYSTEM : Diagnosis Procedure". Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". When detecting no malfunction in those components, the following items are a possible cause. Composite image signal circuits malfunction between video distributor and AV control unit. Refer to AV-123, "Diagnosis Procedure". Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". When detecting no malfunction in those components, the following items are a possible cause. RGB area (YS) signal circuit malfunction between AV control unit and front display unit. Refer to AV-119, "Diagnosis Procedure". Composite image signal circuits malfunction between front display unit and AV control unit. Refer to AV-122, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". Composite image signal circuits malfunction between video distributor and rear display unit. Refer to AV-123, "Diagnosis Procedure".

DVD image is normal.

Camera image is normal. For front display unit, AUX image is not displayed (Menu display is normal).

DVD and camera images are not displayed (Menu display is normal).

For front display unit, AUX image is not displayed (Menu display is not displayed, too).

DVD image is not displayed (Also, menu display is not displayed).

AV

For front display unit, AUX image is rolling.

DVD image is rolling.

For rear display unit, AUX image is not displayed (Menu display is normal).

DVD image is not displayed (Menu display is normal).

Revision: 2009 September

AV-525

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Check items

[BOSE AUDIO WITHOUT NAVIGATION]


Probable malfunction location Vertical synchronizing (VP) signal circuit malfunction between video distributor and rear display unit. Refer to AV-130, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between video distributor and rear display unit. Refer to AV-131, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between video distributor and rear display unit. Refer to AV-129, "Diagnosis Procedure". Composite synchronizing signal circuit malfunction between video distributor and rear display unit. Refer to AV-128, "Diagnosis Procedure". Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". DVD and AUX sound signal circuit malfunction between DVD player and AV control unit at the side where there is no sound. AUX sound signal circuit malfunction between auxiliary input jacks and DVD player at the side where there is no sound. Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)".

At AUX of rear display, menu display is not displayed.

AUX image is normal.

For rear display unit, AUX and DVD image are rolling. There is no AUX sound.

Front display unit displayed, AUX and DVD image are not rolling.

DVD sound is not normal, neither. There is no AUX sound from speaker on the right or left side.

The sound other than AUX sound is normal. There is malfunction in the CONSULT-III self-diagnosis result.

It does not change to AUX mode.

RELATED TO DVD MODE


Trouble diagnosis chart by symptom

Symptoms Front display unit and rear display unit, DVD image is not displayed.

Check items AUX image is not displayed.

Probable malfunction location Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". When detecting no malfunction in those components, the following items are a possible cause. Composite image signal circuits malfunction between video distributor and AV control unit. Refer to AV-123, "Diagnosis Procedure". Composite image signal circuits malfunction between AV control unit and front display unit. Refer to AV-122, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between AV control unit and front display unit. Refer to AV-119, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-120, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and front display unit. Refer to AV-121, "Diagnosis Procedure". Composite image signal circuits malfunction between video distributor and rear display unit. Refer to AV-124, "Diagnosis Procedure".

Camera image is normal. For front display unit, DVD image is not displayed (Menu display is normal). Camera image is not displayed (Only warning message under area is displayed).

For front display unit, DVD image is not displayed (Menu display is not displayed).

AUX image is not displayed (Menu display is not displayed).

For front display, DVD image is rolling.

AUX image is rolling.

For rear display, DVD image is not displayed (Menu display is normal).

AUX image is not displayed (Menu display is normal).

Revision: 2009 September

AV-526

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Check items

[BOSE AUDIO WITHOUT NAVIGATION]


Probable malfunction location Vertical synchronizing (VP) signal circuit malfunction between video distributor and rear display unit. Refer to AV-130, "Diagnosis Procedure". Horizontal synchronizing (HP) signal circuit malfunction between video distributor and rear display unit. Refer to AV-131, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between video distributor and rear display unit. Refer to AV-129, "Diagnosis Procedure". Composite synchronizing signal circuit malfunction between video distributor and rear display unit. Refer toAV-128, "Diagnosis Procedure". Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". DVD and AUX sound signal circuit malfunction between DVD player and AV control unit at the side where there is no sound. Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)".

At DVD of rear display unit, menu display is not displayed.

DVD image is normal.

For rear display unit, DVD and AUX image are rolling. There is no DVD sound. There is no DVD sound from speaker on the right or left side. It does not change to DVD mode.

Front display unit displayed, DVD and AUX image are not rolling.

AUX sound is not normal, neither. There is malfunction in the CONSULT-III self-diagnosis result.

RELATED TO REMOTE CONTROL AND HEADPHONE


Trouble diagnosis chart by symptom

G
Probable malfunction location They operate normally. Battery of headphones. Headphones.

Symptoms

Check items

Headphone does not work

Change headphones to another set.

It does not operate normally. Headphone sound signal circuit malfunction between DVD player and rear display unit. Headphone ON signal circuit malfunction between video distributor and rear display unit. They operate normally. Battery of remote controller. Remote controller body.

Remote control does not work.

Change remote controller to another one.

It does not operate normally. Perform CONSULT-III self-diagnosis. Refer to AV-87, "CONSULT-III Function (MULTI AV)". When detecting no malfunction in those components, the following items are a possible cause. Rear display unit.

AV

Revision: 2009 September

AV-527

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS > [BOSE AUDIO WITHOUT NAVIGATION]

NORMAL OPERATING CONDITION


Description
NOTE: Vehicle operation information, refer to Owner's Manual.
INFOID:0000000005528608

BASIC OPERATIONS
Symptom Possible cause The brightness is at the lowest setting. No image is displayed. The system is in the video mode. The display is turned off. The screen is too dim. The movement is slow. Some pixels in the display are darker or brighter than others. Some menu items cannot be selected. The temperature in the interior of the vehicle is low. This condition is an inherent characteristic of liquid crystal displays. Some menu items become unavailable while the vehicle is driven. Possible solution Adjust the brightness of the display. Push <DISC> to change the mode. Push <Day/Night> to turn on the display. Wait until the interior of the vehicle has warmed up. This is not a malfunction. Park the vehicle in a safe location, and then operate the multi AV system.

RELATED TO VOICE RECOGNITION


Related to telephone The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolves.
Symptom 1. Ensure that the command is valid. 2. Ensure that the command is spoken after the tone. 3. Speak clearly without pausing between words and at level appropriate to the ambient noise level in the vehicle. System fails to interpret the command correctly. 4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will be recognized. 5. If more than one command was said at a time, try saying the commands separately. 6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. See Speaker adaptation (SA) mode earlier in this section. Refer to OWNERS MANUAL. The system consistently selects the wrong voicetag 1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the List Names command. 2. Replace one of the names being confused with a new name. Solution

RELATED TO AUDIO
The majority of the audio malfunctions are the result of outside causes (bad CD/cassette, electromagnetic interference, etc.). Check the symptoms below to diagnose the malfunction. The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning. Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and operation of each piece of electrical equipment, and then determine the cause. NOTE: CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be incorrectly mastered by the customer on a computer. Check if the CDs carry the Compact Disc Logo. If not, the disc is not mastered to the red book Compact Disc Standard and may not play.

Revision: 2009 September

AV-528

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS >
Symptom

[BOSE AUDIO WITHOUT NAVIGATION]


Cause and Counter measure Check if the CD was inserted correctly. Check if the CD is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.

Cannot play

If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be played. Files with extensions other than .MP3, .WMA, .mp3, or .wma cannot be played. In addition, the character codes and number of characters for folder names and file names should be in compliance with the specifications. Check if the disc or the file is generated in an irregular format, This may occur depending on the variation or the setting of MP3/WMA writing applications or other text editing applications. Check if the finalization process, such as session close and disc close, is done for the disc. Check if the CD is protected by copyright.

Poor sound quality It takes a relatively long time before the music starts playing. Music cuts off or skips Skipping with high bit rate files Move immediately to the next song when playing The songs do not play back in the desired order.

Check if the CD is scratched or dirty. If there are many folder or file levels on the MP3/WMA CD, or if it is a multisession disc, some time may be required before the music starts playing. The writing software and hardware combination might not match, or the writing speed, writing depth, writing width might not match the specifications. Try using the slowest writing speed. Skipping may occur with large quantities if data such as for high bit rate data. When a non-MP3/WMA file has been given an extension of .MP3, .WMA, .mp3, or .wma, or when play is prohibited by copyright protection, the player will skip to the next song. The playback order is the order in which the files were written by the software, so the files might not play in the desired order.

Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise from trains and other sources, is not a malfunction. NOTE: Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking the signal. Multi-path noise: This noise results from a time difference between the broadcast waves directly from the station arriving at the antenna and the waves reflected by mountains or buildings.

AV

Revision: 2009 September

AV-529

2010 Murano

PRECAUTIONS
< PRECAUTION > [BOSE AUDIO WITHOUT NAVIGATION]

PRECAUTION
PRECAUTIONS
FOR USA AND CANADA
FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000005528609

The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. Information necessary to service the system safely is included in the SRS AIR BAG and SEAT BELT of this Service Manual. WARNING: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS AIR BAG. Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS


WARNING: When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service.

FOR USA AND CANADA : Precaution for Trouble Diagnosis


AV COMMUNICATION SYSTEM

INFOID:0000000005528610

Do not apply voltage of 7.0 V or higher to the measurement terminals. Use the tester with its open terminal voltage at 7.0 V or less. Turn ignition switch OFF and disconnect the battery cable from the negative terminal before checking the circuit.

FOR USA AND CANADA : Precaution for Harness Repair


AV COMMUNICATION SYSTEM
Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

INFOID:0000000005528611

PKIA0306E

Revision: 2009 September

AV-530

2010 Murano

PRECAUTIONS
[BOSE AUDIO WITHOUT NAVIGATION] < PRECAUTION > Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

C
PKIA0307E

FOR MEXICO
FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000005589985

The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. Information necessary to service the system safely is included in the SRS AIR BAG and SEAT BELT of this Service Manual. WARNING: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS AIR BAG. Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS


WARNING: When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service.

FOR MEXICO : Precaution for Trouble Diagnosis


AV COMMUNICATION SYSTEM

INFOID:0000000005589982

Do not apply voltage of 7.0 V or higher to the measurement terminals. Use the tester with its open terminal voltage at 7.0 V or less. Turn ignition switch OFF and disconnect the battery cable from the negative terminal before checking the cir- AV cuit.

FOR MEXICO : Precaution for Harness Repair


AV COMMUNICATION SYSTEM

INFOID:0000000005589983

Revision: 2009 September

AV-531

2010 Murano

PRECAUTIONS
[BOSE AUDIO WITHOUT NAVIGATION] < PRECAUTION > Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

PKIA0306E

Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

PKIA0307E

Revision: 2009 September

AV-532

2010 Murano

PREPARATION
< PREPARATION > [BOSE AUDIO WITHOUT NAVIGATION]
A

PREPARATION
PREPARATION
Commercial Service Tools
Tool name Description
INFOID:0000000005528612

Power tool

Loosening screws

E
PBIC0191E

AV

Revision: 2009 September

AV-533

2010 Murano

AV CONTROL UNIT
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

REMOVAL AND INSTALLATION


AV CONTROL UNIT
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".
INFOID:0000000005528613

DISASSEMBLY

JPNIA0778ZZ

1. 4.

AV control unit Bracket RH

2.

Bracket LH

3.

A/C auto amp.

Removal and Installation


REMOVAL
1. 2. 3. Remove cluster lid C. Refer to IP-12, "Exploded View". Remove AV control unit with a A/C auto amp. as a single unit from the body. Remove bracket screws, and then remove AV control unit.

INFOID:0000000005528614

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-534

2010 Murano

FRONT DISPLAY UNIT


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528615

FRONT DISPLAY UNIT


Exploded View

D
JPNIA0779ZZ

E
1. Front display unit
INFOID:0000000005528616

Removal and Installation


REMOVAL
1. 2. Remove center ventilator assembly. Refer to IP-12, "Exploded View". Remove display unit with bracket as a single unit.

INSTALLATION
Install in the reverse order of removal.
H

AV

Revision: 2009 September

AV-535

2010 Murano

REAR DISPLAY UNIT


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

REAR DISPLAY UNIT


Exploded View
REMOVAL
INFOID:0000000005528617

JPNIA0794ZZ

1.

Rear display unit

2.

Rear display cover


INFOID:0000000005528618

Removal and Installation


REMOVAL
1. Insert cloth-covered driver into gaps between rear display cover (1) and headlining, and remove rear display cover.
: Vehicle front

SKIB4354E

2.

Disconnect rear display unit connector, remove rear display unit screws and remove the rear display unit.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-536

2010 Murano

VIDEO DISTRIBUTOR
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528619

VIDEO DISTRIBUTOR
Exploded View

D
JPNIA0793ZZ

E
1. Video distributor
INFOID:0000000005528620

Removal and Installation


REMOVAL
1. 2.

Remove lower console finisher LH and lower console finisher RH. Refer to IP-20, "Exploded View". Disconnect video distributor connector, remove video distributor screws and remove the video distributor.

INSTALLATION
Install in the reverse order of removal.
H

AV

Revision: 2009 September

AV-537

2010 Murano

DVD PLAYER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

DVD PLAYER
Exploded View
REMOVAL
Refer to IP-20, "Exploded View".
INFOID:0000000005528621

DISASSEMBLY

JPNIA0792ZZ

1.

DVD player
INFOID:0000000005528622

Removal and Installation


REMOVAL
1. 2. Remove center console assembly. Refer to IP-20, "Exploded View". Disconnect DVD player connector, remove DVD player screws and remove the DVD player.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-538

2010 Murano

FRONT DOOR SPEAKER


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528623

FRONT DOOR SPEAKER


Exploded View

D
JPNIA0773ZZ

E
1. Front door speaker
INFOID:0000000005528624

Removal and Installation


REMOVAL
1. 2.

Remove front door finisher. Refer to INT-12, "FRONT DOOR FINISHER : Exploded View". Remove front door speaker screws, then disconnect front door speaker connector and remove front door speaker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-539

2010 Murano

REAR DOOR SPEAKER


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

REAR DOOR SPEAKER


Exploded View
INFOID:0000000005528625

JPNIA0774ZZ

1.

Rear door speaker


INFOID:0000000005528626

Removal and Installation


REMOVAL
1. 2.

Remove rear door finisher. Refer to INT-16, "REAR DOOR FINISHER : Exploded View". Remove rear door speaker screws, then disconnect rear door speaker connector and remove rear door speaker.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-540

2010 Murano

FRONT SQUAWKER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528627

FRONT SQUAWKER
Exploded View

D
JPNIA0775ZZ

E
1. Front squawker
INFOID:0000000005528628

Removal and Installation


REMOVAL
1. 2.

Remove speaker grille. Refer to IP-12, "Exploded View". Remove front squawker screws, lift up the front squawker and disconnect front squawker connector. Then remove the front squawker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-541

2010 Murano

REAR SPEAKER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

REAR SPEAKER
Exploded View
INFOID:0000000005528629

JPNIA0781ZZ

1. 2.

Rear speaker Rear speaker bracket


INFOID:0000000005528630

Removal and Installation


REMOVAL
1. 2.

Remove luggage side finisher upper. Refer to INT-34, "Exploded View". Remove rear speaker screws, lift up the rear speaker and disconnect rear speaker connector. Then remove the rear speaker.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-542

2010 Murano

CENTER SPEAKER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528631

CENTER SPEAKER
Exploded View

D
JPNIA0780ZZ

E
1. Center speaker
INFOID:0000000005528632

Removal and Installation


REMOVAL
1. 2.

Remove center speaker grille. Refer to IP-12, "Exploded View". Remove center speaker screws, lift up the center speaker and disconnect center speaker connector. Then remove the center speaker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-543

2010 Murano

WOOFER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

WOOFER
Exploded View
INFOID:0000000005528633

JPNIA0782ZZ

: 1. 2.

Vehicle front Clamp Woofer


INFOID:0000000005528634

Removal and Installation


REMOVAL
1. 2. Remove luggage floor finisher center (back). Refer to INT-34, "Exploded View". Remove clamp, disconnect woofer connector and remove the woofer.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-544

2010 Murano

BOSE AMP.
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528635

BOSE AMP.
Exploded View

D
JPNIA0783ZZ

E
: 1. Vehicle front BOSE amp.

Removal and Installation


REMOVAL
1. 2.

F
INFOID:0000000005528636

Remove luggage floor finisher. Refer to INT-34, "Exploded View". Remove BOSE amp. screws, disconnect BOSE amp. connector and remove the BOSE amp.
H

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-545

2010 Murano

MULTIFUNCTION SWITCH
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

MULTIFUNCTION SWITCH
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".
INFOID:0000000005528637

DISASSEMBLY

JPNIA0789ZZ

1. 2.

Multifunction switch Cluster lid D


INFOID:0000000005528638

Removal and Installation


REMOVAL
1. 2. 3. Remove cluster lid D. Refer to IP-12, "Exploded View". Remove multifunction switch with center ventilator grille as a single unit. Remove multifunction switch screws, remove multifunction switch from cluster lid D.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-546

2010 Murano

PRESET SWITCH
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528639

PRESET SWITCH
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".

DISASSEMBLY

G
JPNIA0790ZZ

H
1. Preset switch 2. Cluster lid C
INFOID:0000000005528640

Removal and Installation


REMOVAL
1. 2. Remove cluster lid C. Refer to IP-12, "Exploded View". Remove preset switch screws (A), (B), remove preset switch (1) from cluster lid C.

M
JPNIA0791ZZ

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-547

2010 Murano

STEERING SWITCH
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

STEERING SWITCH
Exploded View
Refer to ST-17, "Exploded View".
INFOID:0000000005528641

Removal and Installation


REMOVAL
Refer to ST-17, "Exploded View".

INFOID:0000000005528642

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-548

2010 Murano

IPOD ADAPTER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528643

IPOD ADAPTER
Exploded View

D
JPNIA0788ZZ

E
1. iPod adapter
INFOID:0000000005528644

Removal and Installation


REMOVAL
1. 2.

Remove front console pocket assembly. Refer to IP-20, "Exploded View". Disconnect iPod adapter connector, remove iPod adapter screws and remove the iPod adapter.

INSTALLATION
Install in the reverse order of removal.
H

AV

Revision: 2009 September

AV-549

2010 Murano

IPOD CONNECTOR
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

IPOD CONNECTOR
Exploded View
REMOVAL
Refer to IP-20, "Exploded View".
INFOID:0000000005528645

DISASSEMBLY

JPNIA0787ZZ

1.

iPod connector
INFOID:0000000005528646

Removal and Installation


REMOVAL
1. 2. Remove center console. Refer to IP-20, "Exploded View". Press the pawl from the back of center console to remove iPod connector.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-550

2010 Murano

AUXILIARY INPUT JACKS


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528647

AUXILIARY INPUT JACKS


Exploded View
REMOVAL
Refer to IP-20, "Exploded View".

DISASSEMBLY

JPNIA0795ZZ

F
1. Auxiliary input jacks
INFOID:0000000005528648

Removal and Installation


REMOVAL
1. 2. Remove console rear finisher. Refer to IP-20, "Exploded View". Remove auxiliary input jacks from center console.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-551

2010 Murano

MICROPHONE
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

MICROPHONE
Exploded View
REMOVAL
Refer to INL-121, "Exploded View".
INFOID:0000000005528649

DISASSEMBLY

JSNIA0132ZZ

1.

Microphone
INFOID:0000000005528650

Removal and Installation


REMOVAL
1. 2. Remove map lamp. Refer to INL-121, "Exploded View". Remove microphone from map lamp.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-552

2010 Murano

CAMERA CONTROL UNIT


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528651

CAMERA CONTROL UNIT


Exploded View

D
JPNIA0796ZZ

E
1. Camera control unit
INFOID:0000000005528652

Removal and Installation


REMOVAL
1. 2.

Remove luggage side finisher lower (RH). Refer to INT-34, "Exploded View". Remove camera control unit screws, disconnect camera control unit connector and remove the camera control unit.

INSTALLATION
Install in the reverse order of removal.

Adjustment
ADJUSTMENT

INFOID:0000000005528653

There may be a misalignment of possible route line center position of rear view monitor after removing camera control unit. Therefore, correct neutral position with the following procedure. 1. Steer the steering wheel to the leftmost and rightmost ends. 2. Drive vehicle at 30 km/h (18.6 MPH) min. speed at least 100 m (328.1 ft).

AV

Revision: 2009 September

AV-553

2010 Murano

REAR VIEW CAMERA


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

REAR VIEW CAMERA


Exploded View
INFOID:0000000005528654

JPNIA0797ZZ

1.

Rear view camera

2.

Finisher
INFOID:0000000005528655

Removal and Installation


REMOVAL
1. 2. 3.

Remove back door finisher inner. Refer to INT-38, "Exploded View". Remove finisher. Remove rear view camera screws, disconnect rear view camera connector and remove rear view camera from back door assembly.

INSTALLATION
Install in the reverse order of removal.

Adjustment

INFOID:0000000005528656

Adjust the guide line position if the guide line position is shifted after installing the rear view camera.

Revision: 2009 September

AV-554

2010 Murano

REAR VIEW CAMERA


[BOSE AUDIO WITHOUT NAVIGATION] < REMOVAL AND INSTALLATION > 1. Draw lines on rearward area of the vehicle passing through the following points: 200 mm (7.87 in) from both sides of the vehicle, and 0.5 m (1.64 ft), 1.0 m (3.28 ft) from the rear end of the bumper. 2. Set into Adjust offset of rear view camera mode of Confirmation / Adjustment mode.

G
SKIB3691E

3.

Rotate the center dial, and then select the guiding line pattern so that its angle is aligned with the correction line of the rear of the vehicle. Selected pattern :7

4.

Make fine adjustment to the correction line of the rear of the vehicle with up/down/left/right switches so that its position is aligned with the guiding line. Press OK switch and record the adjusted guiding line position to the camera control unit. Up/Down adjustment range Left/Right adjustment range : 20 20 : 20 20
SKIB3689E

CAUTION: Never operate other function such as pressing BACK while writing index data. If Confirmation/Adjustment mode does not function in the above procedure, perform one of the following service to adjust the index again. Remove battery for five min. Then reconnect battery. Remove camera control unit connector for five min. Then reconnect camera control unit connector.

AV

Revision: 2009 September

AV-555

2010 Murano

STEERING ANGLE SENSOR


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

STEERING ANGLE SENSOR


Exploded View
REMOVAL
Refer to SR-14, "Exploded View" (for USA and Canada) or SR-40, "Exploded View" (for Mexico).
INFOID:0000000005528657

DISASSEMBLY

JSNIA0135ZZ

1. 2.

Spiral cable Steering angle sensor


INFOID:0000000005528658

Removal and Installation


REMOVAL
1. 2. Remove spiral cable. Remove steering angle sensor from spiral cable.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-556

2010 Murano

ROOF ANTENNA
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528659

ROOF ANTENNA
Exploded View

JPNIA0786ZZ

1.

Rod antenna

2.

Antenna bade & satellite radio antenna

Refer to GI-4, "Components" for symbols in the figure.

G
INFOID:0000000005528660

Removal and Installation


REMOVAL
1.

2. 3.

Remove headlining assembly (rear) to secure work space between vehicle and headlining. Refer to INT26, "NORMAL ROOF : Exploded View" [without sunroof] or INT-30, "SUNROOF : Exploded View" [with sunroof]. Disconnect AM/FM main connector and satellite radio antenna connector. Remove antenna base & satellite radio nut, and then remove antenna base &satellite radio antenna from roof panel.

INSTALLATION
Install in the reverse order of removal. Antenna base & satellite radio antenna mounting nut : 6.5 Nm (0.66 kg-m, 58 in-lb)

CAUTION: When Antenna base & satellite radio antenna mounting nut tightening torque is loose, be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may become deformed.

AV

Revision: 2009 September

AV-557

2010 Murano

SATELLITE RADIO TUNER


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

SATELLITE RADIO TUNER


Exploded View
INFOID:0000000005528661

JPNIA0784ZZ

1. 4.

Satellite radio tuner Bracket RH

2.

Bracket LH

3.

TEL adapter unit

Removal and Installation


REMOVAL
1. 2. Remove luggage floor finisher front. Refer to INT-34, "Exploded View". Remove satellite radio tuner (1) with TEL adapter unit as a single unit from the body.
: Vehicle front

INFOID:0000000005528662

3.

Remove bracket screws, and them remove satellite tuner.

JPNIA0785ZZ

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-558

2010 Murano

TEL ADAPTER UNIT


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528663

TEL ADAPTER UNIT


Exploded View

F
JPNIA0784ZZ

1. 4.

Satellite radio tuner Bracket RH

2.

Bracket LH

3.

TEL adapter unit

Removal and Installation


REMOVAL
1. 2. 3. Remove luggage floor finisher front. Refer to INT-34, "Exploded View". Remove TEL adapter unit (1) with satellite radio tuner as a single unit from the body. Remove bracket screws, and them remove TEL adapter unit.

INFOID:0000000005528664

L
JPNIA0805ZZ

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-559

2010 Murano

ANTENNA FEEDER (RADIO)


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

ANTENNA FEEDER (RADIO)


Harness Layout
INFOID:0000000005528665

JPNIA0798GB

Revision: 2009 September

AV-560

2010 Murano

ANTENNA FEEDER (SATELLITE RADIO)


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]
A
INFOID:0000000005528666

ANTENNA FEEDER (SATELLITE RADIO)


Harness Layout

AV

P
JPNIA0798GB

Revision: 2009 September

AV-561

2010 Murano

ANTENNA FEEDER (TEL)


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITHOUT NAVIGATION]

ANTENNA FEEDER (TEL)


Harness Layout
INFOID:0000000005528667

JPNIA0798GB

Revision: 2009 September

AV-562

2010 Murano

DIAGNOSIS AND REPAIR WORK FLOW


< BASIC INSPECTION > [BOSE AUDIO WITH NAVIGATION]
A

BASIC INSPECTION
DIAGNOSIS AND REPAIR WORK FLOW
Work Flow
OVERALL SEQUENCE
INFOID:0000000005528668

JSNIA0732GB

Reference 1 Refer to AV-601, "CONSULT-III Function (MULTI AV)". Reference 2 Refer to AV-684, "DTC Index". Reference 3 Refer to AV-773, "Symptom Table".

AV

DETAILED FLOW

1.INTERVIEW AND SYMPTOM CONFIRMATION


Check the malfunction symptoms by performing the following items. Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred). Check the symptom. Is the occurring symptom a malfunction? YES >> GO TO 2. NO >> INSPECTION END

2.DIAGNOSIS WITH CONSULT-III


Revision: 2009 September

AV-563

2010 Murano

DIAGNOSIS AND REPAIR WORK FLOW


[BOSE AUDIO WITH NAVIGATION] < BASIC INSPECTION > 1. Connect CONSULT-III and perform a self-diagnosis for MULTI AV. Refer to AV-601, "CONSULT-III Function (MULTI AV)". NOTE: Skip to step 4 of the diagnosis procedure if MULTI AV is not displayed. 2. Check if any DTC is displayed in the self-diagnosis results. Is DTC displayed? YES >> GO TO 3. NO >> GO TO 4.

3.TROUBLE DIAGNOSIS FOR DTC


1. 2. Check the DTC indicated in the self-diagnosis results. Perform the relevant diagnosis referring to the DTC Index. Refer to AV-684, "DTC Index". >> GO TO 5.

4.TROUBLE DIAGNOSIS FOR SYMPTOMS


Perform the relevant diagnosis referring to the diagnosis chart by symptom. Refer to AV-773, "Symptom Table". >> GO TO 5.

5.ERROR PART REPAIR


Repair or replace the identified malfunctioning parts. Perform a self-diagnosis for MULTI AV with CONSULT-III. NOTE: Erase the stored self-diagnosis results after repairing or replacing the relevant components if any DTC has been indicated in the self-diagnosis results. 3. Check that the symptom does not occur. Does the symptom occur? YES >> GO TO 1. NO >> INSPECTION END 1. 2.

Revision: 2009 September

AV-564

2010 Murano

INSPECTION AND ADJUSTMENT


< BASIC INSPECTION > [BOSE AUDIO WITH NAVIGATION]
A

INSPECTION AND ADJUSTMENT


ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL
ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Description
INFOID:0000000005528669

Always correct the center position of the rear view monitor's possible route line after disconnecting the battery negative terminal.

ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement
INFOID:0000000005528670

1.CORRECTION OF CENTER POSITION OF REAR VIEW MONITOR'S POSSIBLE ROUTE LINE


Refer to the following for details. >> Refer to AV-565, "REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement".
E

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT


ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description
INFOID:0000000005528671

When camera control unit is replaced, the center position of rear view monitor possible route line is corrected.

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement

INFOID:0000000005528672

1.CORRECTION OF CENTER POSITION OF REAR VIEW MONITOR'S POSSIBLE ROUTE LINE


Refer to the following for details. >> Refer to AV-565, "REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement".

REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT


REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Description
Adjust the center position of the possible route line of the rear view monitor if it is shifted.
INFOID:0000000005528673

REAR VIEW MONITOR POSSIBLE ROUTE LINE CENTER POSITION ADJUSTMENT : Special Repair Requirement

INFOID:0000000005528674

AV

1.STEERING OPERATION
Steer the steering wheel to the leftmost and rightmost positions. >> GO TO 2
O

2.DRIVING
Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of 30 km/h (18.6 MPH) or more. >> END

Revision: 2009 September

AV-565

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]

SYSTEM DESCRIPTION
MULTI AV SYSTEM
System Diagram
INFOID:0000000005528675

JSNIA1070GB

NOTE: Woofer, illustrated in the above figure, integrates two woofers and a woofer amp. In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

Revision: 2009 September

AV-566

2010 Murano

MULTI AV SYSTEM
[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.

C
JSNIA1062GB

System Description
MULTI AV system means that the following systems are integrated.
System name NAVIGATION SYSTEM AUDIO SYSTEM REAR VIEW MONITOR SYSTEM HANDS-FREE PHONE SYSTEM System explanation AV-572, "System Description" AV-580, "System Description" AV-577, "System Description" AV-584, "System Description"

D
INFOID:0000000005528676

VEHICLE INFORMATION SYSTEM

Status of audio, climate control system, fuel economy, maintenance and navigation is displayed. AV control unit displays the fuel consumption status while receiving data signal through CAN communication from ECM and combination meter. AV control unit is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. Refer to the following AUXILIARY INPUT SYSTEM. Refer to the following VOICE RECOGNITION SYSTEM. Refer to the following TOUCH PANEL SYSTEM.

AUXILIARY INPUT SYSTEM VOICE RECOGNITION SYSTEM TOUCH PANEL SYSTEM

AV control unit function by transmitting/receiving data one by one with each unit (slave unit) that configures them completely as a master unit by connecting between units that configure MULTI AV system with two AV K communication lines (H, L). Two AV communication lines (H, L) adopt a twisted pair line that is resistant to noise. AV control unit is connected by CAN communication, and it receives data signal from ECM, combination meter. It computes and displays fuel economy information value with the obtained information. Transmitting/ L receiving of data signal is performed by BCM. Also, it transmits the required signal of vehicle setting and receives the response signal. AV control unit is connected with front display unit and serial communication, and it transmits the required M signal of display and display control and receives the response signal from front display unit. NOTE: AV control unit can perform CONSULT-III self-operating function and on board self-diagnosis. CONSULT-III self diagnosis: Refer to AV-601, "CONSULT-III Function (MULTI AV)". AV On board self diagnosis: Refer to AV-587, "Diagnosis Description".

AUXILIARY INPUT SYSTEM


Image and sound can be output from an external device by connecting a device with auxiliary input jacks. Operation can be performed with multifunction switch and steering switch. Multifunction switch transmits operation signal to AV control unit by AV communication. The AUX image signal is input from the auxiliary input jacks to the front display unit.
O

Revision: 2009 September

AV-567

2010 Murano

MULTI AV SYSTEM
[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > The AUX sound signal is input from the auxiliary input jacks to the AV control unit. The AV control unit outputs the AUX sound signal to the BOSE amp. The BOSE amp. outputs the AUX sound signal to woofer and each speaker.

JSNIA1091GB

VOICE RECOGNITION SYSTEM


Each operation of multi AV system can be performed by inputting sound in to a microphone. Start of sound recognition system can be performed by steering switch.

JSNIA1092GB

TOUCH PANEL SYSTEM

JSNIA0904GB

Each operation of multi AV system can be performed by directly touching the appropriate display.

Revision: 2009 September

AV-568

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528677

Component Parts Location

JSNIA1096ZZ

1. 4. 7.

Center speaker Rear door speaker LH Woofer

2. 5. 8. 11.

Front squawker LH Rear speaker LH Rear view camera Antenna base (antenna amp. and satellite antenna)

3. 6. 9.

Front door speaker LH BOSE amp. Camera control unit

AV

10. Rear speaker RH 13. Front door speaker RH 16. GPS antenna 19. Auxiliary input jacks 22. Preset switch 25. Front display unit A. D. Luggage floor finisher is removed condition Spiral cable part

12. Rear door speaker RH 15. Microphone 18. Steering switch 21. iPod adapter 24. Multifunction switch Combination meter is removed condition

14. Front squawker RH 17. Steering angle sensor 20. iPod connector 23. AV control unit

B. E.

Luggage side finisher lower RH is reC. moved condition Console finisher is removed condition

Revision: 2009 September

AV-569

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528678

Component Description
Part name Description

AV CONTROL UNIT

Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function. Front display image is controlled by the serial communication from AV control unit. RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Auxiliary image signal is input from the auxiliary input jack. Camera image signal is input from camera control unit. Synchronize signal (HP, VP) is output to AV control unit. Touch panel function can be operated for each system by touching a display directly. Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker. Woofer amp. ON signal is transmitted to woofer. Composed of two woofers and a woofer amp. Inputs power (amp. ON) and sound signal from BOSE amp. Outputs low frequency sound. Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated. The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch. Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated. The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch. The disk ejection operating signal is performed by wiring harness. Operations for audio, hands-free phone, audio response and navigation, etc. are possible. Steering switch signal (operation signal) is output to AV control unit.

FRONT DISPLAY UNIT

BOSE AMP.

WOOFER

FRONT DOOR SPEAKER REAR DOOR SPEAKER FRONT SQUAWKER REAR SPEAKER CENTER SPEAKER

MULTIFUNCTION SWITCH

PRESET SWITCH

STEERING SWITCH

Revision: 2009 September

AV-570

2010 Murano

MULTI AV SYSTEM
< SYSTEM DESCRIPTION >
Part name

[BOSE AUDIO WITH NAVIGATION]


Description Camera image signal is input from rear view camera. Camera image signal output to front display unit. Power (camera ON signal) is transmitted to rear view camera. Controlled by AV communication transmitted from AV control unit. AV control unit recognizes the presence of camera system with camera connection recognition signal. The image of vehicle rear view is transmitted to camera control unit. It receives the power (camera ON signal) from the camera control unit and operates. Steering signal necessary for possible route line control is transmitted to camera control unit. Used for hands-free phone operation and voice recognition. Mic signal is transmitted to AV control unit. The power (Mic. power supply) is supplied from the AV control unit. AUX image signal of auxiliary input is transmitted to front display, and sound signal is transmitted to AV control unit. GPS signal is received and transmitted to AV control unit. An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted. ANTENNA AMP. Radio signal received by rod antenna is amplified and transmitted to AV control unit. Power (antenna amp. ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA Receives the satellite radio wave and outputs it to the AV control unit. Inputs iPod sound signal from iPod, and outputs iPod sound signal to AV control unit.

CAMERA CONTROL UNIT

REAR VIEW CAMERA

STEERING ANGLE SENSOR

MICROPHONE

AUXILIARY INPUT JACKS GPS ANTENNA

ANTENNA BASE

iPod ADAPTER

Receiving/transmitting of iPod operation signals are performed as follows: - between AV control unit and iPod adapter: AV communication. - between iPod and iPod adapter: serial communication.

AV

Revision: 2009 September

AV-571

2010 Murano

NAVIGATION SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]

NAVIGATION SYSTEM
System Diagram
INFOID:0000000005528679

JSNIA0908GB

System Description
DESCRIPTION

INFOID:0000000005528680

The AV control unit controls navigation function while GPS tuner has built-in map data, GYRO (angle speed sensor), on the HDD (Hard Disk Drive). The AV control unit inputs operation signal with communication signal, through display (touch panel) and multifunction switch and steering switch. Guide sound is output to front speaker through BOSE amp. from AV control unit when operating navigation system. A vehicle position is calculated with the GYRO (angle speed sensor), vehicle sensor, signal from GPS satellite and map data stored on HDD (Hard Disk Drive), and transmits the map image signal (RGB image, RGB area, RGB image synchronizing) to the front display unit.

POSITION DETECTION PRINCIPLE


The navigation system periodically calculates the current vehicle position according to the following three types of signals. Travel distance of the vehicle as determined by the vehicle speed sensor Vehicle turning angle determined by the gyroscope (angular speed sensor) The travel direction of the vehicle determined by the GPS antenna (GPS information) The current position of the vehicle is then identified by comparing the calculated vehicle position with map data, which is stored in the HDD (Hard Disk Drive) (map-matching), and indicated on the screen with a current location mark. More accurate data is used by comparing position detection results from GPS to the map-matching. The current position is calculated by detecting the travel distance from the previous calculation point, and its direction change. Travel distance The travel distance is generated from the vehicle speed sensor input signal. The automatic distance correction function is adopted for preventing a miss-detection of the travel distance because of tire wear etc. Travel direction The gyroscope (angular velocity sensor) and GPS antenna (GPS information) generate the change of the travel direction. Both have advantages and disadvantages as per the following descriptions.
Revision: 2009 September

JSNIA0177GB

SEL684V

AV-572

2010 Murano

NAVIGATION SYSTEM
< SYSTEM DESCRIPTION >
Type Gyroscope (angular velocity sensor) GPS antenna (GPS information) Advantage The turning angle is precisely detected. The travel direction (North/South/East/West) is detected.

[BOSE AUDIO WITH NAVIGATION]


A

Disadvantage Errors are accumulated when driving a long distance without stopping. The travel direction is not precisely detected when driving slowly.

Input signals are prioritized in each situation. However, this order of priority may change in accordance with more detailed travel conditions so that the travel direction is detected more accurately.

MAP-MATCHING
Map-matching repositions the vehicle on the road map when a new location is judged to be more accurate. This is done by comparing the current vehicle position (calculated by the normal position detection method) from the map data stored in the HDD (Hard Disk Drive).
D

SEL685V

There is a possibility that the vehicle position may not be corrected the when vehicle is driven over a certain distance or time in which GPS information is hard to receive. Manually correct the current location mark on the screen. Map-matching detects, prepares, and prioritizes several alternative routes in addition to the road detected as currently being driven on. Therefore, due to errors in the distance and/or direction, an incorrect road may be prioritized, and the current location mark may be repositioned to the incorrect road. If two roads are running in parallel, they are of the same priority. Therefore, the current location mark may appear on either of them alternately, depending on maneuvering of the steering wheel and configuration of the road, etc.
SEL686V

Map-matching does not function correctly when the road on which the vehicle is driving is new, etc. and not recorded in the map data. In addition map-matching does not function correctly when the road pattern stored in the map data and the actual road pattern are different due to repair, etc. Therefore, the map-matching function detects other roads as a currently driving road if the road is not in the map, and displays the current location mark on it. Later, the current location mark may be repositioned to the road if the correct road is detected. Effective range for comparing the vehicle position and travel direction calculated by the distance and direction with the road data is JSNIA0180GB limited. Therefore, correction by map-matching is not possible when there is an excessive gap between the real-time vehicle position and the position on the map.

AV

GPS (GLOBAL POSITIONING SYSTEM)

Revision: 2009 September

AV-573

2010 Murano

NAVIGATION SYSTEM
[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > GPS (Global Positioning System) is developed for and is controlled by the US Department of Defense. The system utilizes GPS satellites (NAVSTAR), transmitting out radio waves while flying on an orbit around the earth at an altitude of approximately 21,000 km (13,049 mile). The receiver calculates the travel position in three dimensions (latitude/longitude/altitude) according to the time lag of the radio waves that four or more GPS satellites transmit (three-dimensional positioning). The GPS receiver calculates the travel position in two dimensions (latitude/longitude) with the previous altitude data if the GPS receiver receives only three radio waves (two-dimensional positionSEL526V ing). GPS position correction is not performed while the vehicle is stopped.
Accuracy of GPS will deteriorate under the following conditions: In two-dimensional positioning, GPS accuracy will deteriorate when altitude of the vehicle position changes. The position of GPS satellite affects GPS detection precision. The position detection may not be precisely performed. The position detection is not performed if GPS receiver does not receive radio waves from GPS satellites. (Inside a tunnel, parking in a building, under an elevated highway etc.) GPS receiver may not receive radio waves from GPS satellites if any object is placed on the GPS antenna. NOTE: The detection result has an error of approximately 10 m (32.81 ft) even with a high-precision three dimensional positioning. There may be cases when the accuracy is lowered and radio waves are stopped intentionally because the GPS satellite signal is controlled by the US trace control center.

Revision: 2009 September

AV-574

2010 Murano

NAVIGATION SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528681

Component Parts Location

JSNIA1096ZZ

1. 4. 7.

Center speaker Rear door speaker LH Woofer

2. 5. 8. 11.

Front squawker LH Rear speaker LH Rear view camera Antenna base (antenna amp. and satellite antenna)

3. 6. 9.

Front door speaker LH BOSE amp. Camera control unit

AV

10. Rear speaker RH 13. Front door speaker RH 16. GPS antenna 19. Auxiliary input jacks 22. Preset switch 25. Front display unit A. D. Luggage floor finisher is removed condition Spiral cable part

12. Rear door speaker RH 15. Microphone 18. Steering switch 21. iPod adapter 24. Multifunction switch Combination meter is removed condition

14. Front squawker RH 17. Steering angle sensor 20. iPod connector 23. AV control unit

B. E.

Luggage side finisher lower RH is reC. moved condition Console finisher is removed condition

Revision: 2009 September

AV-575

2010 Murano

NAVIGATION SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528682

Component Description
Part name Description

AV CONTROL UNIT

It is the master unit that controls each operation of the Navigation system. The HDD (Hard Disk Drive) is built in, and the map data is stored in HDD. The RGB signal (map information) is output to the front display unit. The voice guidance signal is output to the BOSE amp.

FRONT DISPLAY UNIT BOSE AMP. FRONT DOOR SPEAKER FRONT SQUAWKER MULTIFUNCTION SWITCH

Map image signal is input from AV control unit, and it is indicated on the display. Each operation of navigation can be performed by the touch panel function. Voice guidance signal is input from AV control unit, and it is output to front LH/RH speakers. Voice guidance signal from BOSE amp. is output. Each operation of navigation can be performed. The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch. Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated. The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch. The disk ejection operating signal is performed by wiring harness. Each operation of navigation, etc. can be performed. Switch operating signal is output to AV control unit. Used for hands-free phone operation and voice recognition. Mic signal is transmitted to AV control unit. Power (Mic VCC) is supplied from AV control unit. GPS signal is received and is output to AV control unit.

PRESET SWITCH

STEERING SWITCH

MICROPHONE GPS ANTENNA

Revision: 2009 September

AV-576

2010 Murano

REAR VIEW MONITOR SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528683

REAR VIEW MONITOR SYSTEM


System Diagram

F
JSNIA1093GB

System Description
CAMERA IMAGE OPERATION PRINCIPLE

INFOID:0000000005528684

Power is supplied to rear view camera from camera control unit and outputs camera image signal to camera control unit when selector lever is set to the R position and the reverse signal on camera control unit is input. Camera control unit synthesizes guide lines and possible route lines with camera image signal from rear view camera, and transmits camera image signal to the front display unit. In this case, since the reverse signal is also input to AV control unit, the AV control unit recognizes that the selector lever is in the R position, and it switches communication signal between AV control unit and front display unit, and image that is displayed on the front display unit by RGB image signal with rear view monitor image. In addition, possible route lines are controlled by original sensor signal from steering angle sensor. The AV control unit determines whether rear view camera is equipped or not, based on the presence of camera connection recognition signal. It switches to rear view monitor image at the time of reverse signal input when it is equipped. Warning message under the rear view monitor display is described by AV control unit. AV control unit is connected in communication with camera control unit and front display unit, and it controls operation of rear view monitor system.

AV

Revision: 2009 September

AV-577

2010 Murano

REAR VIEW MONITOR SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528685

Component Parts Location

JSNIA1096ZZ

1. 4. 7.

Center speaker Rear door speaker LH Woofer

2. 5. 8.

Front squawker LH Rear speaker LH Rear view camera

3. 6. 9.

Front door speaker LH BOSE amp. Camera control unit

10. Rear speaker RH 13. Front door speaker RH 16. GPS antenna 19. Auxiliary input jacks 22. Preset switch 25. Front display unit A. D. Luggage floor finisher is removed condition Spiral cable part

Antenna base (antenna amp. and 11. satellite antenna) 14. Front squawker RH 17. Steering angle sensor 20. iPod connector 23. AV control unit

12. Rear door speaker RH 15. Microphone 18. Steering switch 21. iPod adapter 24. Multifunction switch Combination meter is removed condition

B. E.

Luggage side finisher lower RH is reC. moved condition Console finisher is removed condition

Revision: 2009 September

AV-578

2010 Murano

REAR VIEW MONITOR SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528686

Component Description
Part name AV CONTROL UNIT Description

Image on display is changed to rear view monitor image with serial communication between AV control unit and front display unit. Warning displayed in rear view monitor image is illustrated. Camera image signal is transmitted from camera control unit, and RGB signal for warning display is transmitted from AV control unit. Rear view monitor image is changed with the communication for AV control unit. Camera image signal is input from rear view camera, and camera image is indicated on the front display unit. Power (camera ON signal) is transmitted to rear view camera. Controlled by AV communication transmitted from AV control unit. AV control unit recognizes the presence of camera system with camera connection recognition signal. The image of vehicle rear view is transmitted to camera control unit. Steering signal necessary for possible route line control is transmitted to camera control unit.

FRONT DISPLAY UNIT

CAMERA CONTROL UNIT

REAR VIEW CAMERA STEERING ANGLE SENSOR

AV

Revision: 2009 September

AV-579

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]

AUDIO SYSTEM
System Diagram
INFOID:0000000005528687

JSNIA1094GB

NOTE: Woofer, illustrated in the above figure, integrates two woofers and a woofer amp. The name MULTIFUNCTION SWITCH indicates the integration of PRESET SWITCH and MULTIFUNCTION SWITCH virtually. An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted.

JSNIA1062GB

System Description

INFOID:0000000005528688

The audio system is equipped with the following functions. Each function is operated with multifunction switch, preset switch, touch panel, steering switch or audio recognition. Operation status of AUDIO is indicated in the display.
Function AM/FM radio Satellite radio CD Music Box (Hard Disk Drive) CF (Compact Flash) iPod connection AUX mode

FUNCTION DESCRIPTION
Operating Signal Audio system operation can be performed with multifunction switch, preset switch, steering switch, touch panel function or voice recognition function.

Revision: 2009 September

AV-580

2010 Murano

AUDIO SYSTEM
[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > Operating signal is transmitted to AV control unit with AV communication when it is operated by multifunction switch or preset switch. The disk ejection operating signal is performed by wiring harness. Operating signal is transmitted to AV control unit with steering switch signal when it is operated by steering switch. Refer to AV-567, "System Description" for explanation of voice recognition function and touch panel function.
Screen Front Display Switching of display is performed with serial communication between front display unit and AV control unit. The image signal to front display operating condition is performed with RGB image signal, RGB area signal and RGB synchronizing signal. AM/FM Radio Mode AM/FM radio tuner is built into AV control unit. AM/FM radio wave is received by rod antenna, next it is amplified by antenna amp., and finally it is input to AV control unit. The FM sub antenna is installed on the back door window glass and the AV control unit is received. Audio signal is input to BOSE amp. and BOSE amp. outputs to woofer and each speaker for AV control unit. Satellite Radio Mode Satellite radio tuner is built into AV control unit. Audio wave (satellite radio) is received by antenna base (satellite antenna), and it is input to AV control unit. AV control unit outputs audio signal to BOSE amp. The signal is also outputted from BOSE amp. to both woofer and each speaker. CD Mode CD function is built into AV control unit. AV control unit outputs audio signal to BOSE amp. and BOSE amp. outputs to woofer and each speaker when CD is inserted to AV control unit. Music Box Mode Music CD data is stored on HDD that is built into AV control unit, and it can be played. AV control unit outputs music (audio signal) that is stored on HDD to BOSE amp., and BOSE amp. outputs to woofer and each speaker. CF Mode AV control unit has built in CF replay function. Music (audio signal) that is stored in CF outputs to BOSE amp., and BOSE amp. outputs to woofer and each speaker when CF is inserted into AV control unit. iPod Connection

Connect iPod and iPod adapter with wire harness and iPod adapter input iPod sound signal from iPod . When iPod mode is selected, iPod adapter outputs iPod sound signal to AV control unit. AV control unit output sound signal to BOSE amp., and BOSE amp. output sound signal to woofer and each speaker. Receiving/transmitting of iPod operation signals are performed as follows: - between AV control unit and iPod adapter: AV communication. - between iPod and iPod adapter: serial communication. The iPod connection status can be recognized if iPod adapter receives iPod connection recognition signal. The iPod adapter can charge iPod.
AUX Mode Refer to AV-567, "System Description".

AV

Revision: 2009 September

AV-581

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528689

Component Parts Location

JSNIA1096ZZ

1. 4. 7.

Center speaker Rear door speaker LH Woofer

2. 5. 8.

Front squawker LH Rear speaker LH Rear view camera

3. 6. 9.

Front door speaker LH BOSE amp. Camera control unit

10. Rear speaker RH 13. Front door speaker RH 16. GPS antenna 19. Auxiliary input jacks 22. Preset switch 25. Front display unit A. D. Luggage floor finisher is removed condition Spiral cable part

Antenna base (antenna amp. and 11. satellite antenna) 14. Front squawker RH 17. Steering angle sensor 20. iPod connector 23. AV control unit

12. Rear door speaker RH 15. Microphone 18. Steering switch 21. iPod adapter 24. Multifunction switch Combination meter is removed condition

B. E.

Luggage side finisher lower RH is reC. moved condition Console finisher is removed condition

Revision: 2009 September

AV-582

2010 Murano

AUDIO SYSTEM
< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528690

Component Description
Part name Description

AV CONTROL UNIT

Receiving function of AM/FM/satellite radio, replaying function of CD, replaying/saving function of music box (HDD), replaying function of CF and voice recognition function are integrated. BOSE amp. ON signal and sound signal are transmitted to BOSE amp. Front display image is controlled by the serial communication from AV control unit. RGB image signal (audio operation condition) is input from AV control unit. Touch panel function can be operated for each system by touching the display directly. Inputs power (amp. ON) and sound signal from AV control unit, and outputs sound signal to woofer and each speaker. Woofer amp. ON signal is transmitted to woofer. Composed of two woofers and a woofer amp. Inputs power (amp. ON) and sound signal from BOSE amp. Outputs low frequency sound. Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (mid and low range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Outputs sound signal from BOSE amp. Outputs sound (high and mid range). Operation panel is equipped with the centralized switch where audio and auxiliary input operations are integrated. The multifunction switch is connected to the preset switch by wiring harness, and it transmits the operation signal to the preset switch. Operation panel is equipped with the centralized switch where audio and air conditioner operations are integrated. The preset switch is connected via AV communication, and it transmits the operation signals of the preset switch and multifunction switch. The disk ejection operating signal is performed by wiring harness. Operations for audio, hands-free phone, audio response and navigation, etc. are possible. Steering switch signal (operation signal) is output to AV control unit. Used for hands-free phone operation and voice recognition. Mic signal is transmitted to AV control unit. The power (Mic. power supply) is supplied from the AV control unit. An antenna base integrated with radio antenna amp. and satellite radio antenna is adopted. ANTENNA AMP. Radio signal received by rod antenna is amplified and transmitted to AV control unit. Power (antenna amp. ON signal) is supplied from AV control unit. SATELLITE RADIO ANTENNA Receives the satellite radio wave and outputs it to the AV control unit. Inputs iPod sound signal from iPod, and outputs iPod sound signal to AV control unit.

FRONT DISPLAY UNIT

BOSE AMP.

WOOFER

FRONT DOOR SPEAKER REAR DOOR SPEAKER FRONT SQUAWKER REAR SPEAKER CENTER SPEAKER

MULTIFUNCTION SWITCH

PRESET SWITCH

STEERING SWITCH

MICROPHONE

AV

ANTENNA BASE

iPod ADAPTER

Receiving/transmitting of iPod operation signals are performed as follows: - between AV control unit and iPod adapter: AV communication. - between iPod and iPod adapter: serial communication.

Revision: 2009 September

AV-583

2010 Murano

HANDS-FREE PHONE SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]

HANDS-FREE PHONE SYSTEM


System Diagram
INFOID:0000000005528691

JSNIA1095GB

System Description

INFOID:0000000005528692

AV control unit includes hands-free phone function. Hands-free communication can be operated by connecting using Bluetooth communication with cellular phone. Operation is performed by steering switch, and operating condition is indicated on front display. Guide sound that is heard during operation is input from AV control unit to BOSE amp., and is output from front speaker.

WHEN A CALL IS ORIGINATED


Spoken voice sound output from the microphone (MIC. signal) is input to AV control unit. AV control unit outputs to cellular phone with Bluetooth communication as a TEL voice signal. Vocal sound is then heard at the other party.

WHEN RECEIVING A CALL


Vocal sound is input to own cellular phone from the other party. TEL voice signal is output to front speaker, and the signal is input to BOSE amp. via AV control unit by establishing Bluetooth communication from cellular phone.

Revision: 2009 September

AV-584

2010 Murano

HANDS-FREE PHONE SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528693

Component Parts Location

JSNIA1096ZZ

1. 4. 7.

Center speaker Rear door speaker LH Woofer

2. 5. 8. 11.

Front squawker LH Rear speaker LH Rear view camera Antenna base (antenna amp. and satellite antenna)

3. 6. 9.

Front door speaker LH BOSE amp. Camera control unit

AV

10. Rear speaker RH 13. Front door speaker RH 16. GPS antenna 19. Auxiliary input jacks 22. Preset switch 25. Front display unit A. D. Luggage floor finisher is removed condition Spiral cable part

12. Rear door speaker RH 15. Microphone 18. Steering switch 21. iPod adapter 24. Multifunction switch Combination meter is removed condition

14. Front squawker RH 17. Steering angle sensor 20. iPod connector 23. AV control unit

B. E.

Luggage side finisher lower RH is reC. moved condition Console finisher is removed condition

Revision: 2009 September

AV-585

2010 Murano

HANDS-FREE PHONE SYSTEM


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528694

Component Description
Part name AV CONTROL UNIT Description

It includes the TEL adapter and Bluetooth function. It outputs the TEL voice signal and voice guidance sound signal to the BOSE amp. Display image is controlled by the serial communication from AV control unit. Inputs RGB image signal (RGB, RGB area and RGB synchronizing) from AV control unit and displays the status of hands free phone system. Inputs TEL voice signal or voice guidance signal from AV control unit and outputs it to front speaker. Outputs the TEL voice signal or voice guidance signal from BOSE amp. Adjust the sound when using TEL. The operation signal is transmitted to the AV control unit via AV communication. The hands free-phone system can be operated. Steering switch signal (operation signal) is output to AV control unit. Uses when operating the hands-free phone. Outputs Mic. signal (TEL voice signal) to the AV control unit. The power (Mic. power supply) is supplied from the AV control unit.

FRONT DISPLAY UNIT

BOSE AMP. FRONT DOOR SPEAKER PRESET SWITCH

STEERING SWITCH

MICROPHONE

Revision: 2009 September

AV-586

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528695

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


Diagnosis Description
MULTIFUNCTION SWITCH AND PRESET SWITCH SELF-DIAGNOSIS FUNCTION
The ON/OFF operation (continuity) of each switch in the multifunction switch and preset switch can be checked.
Self-diagnosis Mode Press the BACK switch and the switch of the 8-direction switches within 10 seconds after turning the ignition switch from OFF to ACC and hold them for 3 seconds or more. Then the buzzer sounds, all indicators of the preset switch illuminate, and the self-diagnosis mode starts. The continuity of each switch at the ON position can be checked by pressing the switch. The buzzer sounds if the switch is normal. NOTE: The disk eject switch cannot be checked.
JSNIA1074GB

F Finishing Self-diagnosis Mode Self-diagnosis mode is canceled when turning the ignition switch OFF.

MULTI AV SYSTEM ON BOARD DIAGNOSIS FUNCTION


The AV control unit diagnosis function starts up with multifunction switch operation and the AV control unit performs a diagnosis for each unit in the system during the on board diagnosis. Perform a CONSULT-III diagnosis if the on board diagnosis does not start, e.g., the screen does not display anything, the multifunction switch does not function, etc.
H

ON BOARD DIAGNOSIS
Description The trouble diagnosis function has a self-diagnosis mode for conducting trouble diagnosis automatically and a confirmation/adjustment mode for operating manually. The self-diagnosis mode performs diagnoses on the AV control unit, connections between system components as well as connections between AV control unit and GPS antenna and between AV control unit and satellite radio antenna. Then it displays the diagnosis results on the display. The confirmation/adjustment mode allows the technician to check, modify or adjust the vehicle signals and set values, as well as to monitor the system error records and system communication status. The checking, modifying or adjusting generally require human intervention and judgment (the system cannot automatically). On Board Diagnosis Item

M
Mode Description AV control unit diagnosis Diagnoses the connections across system components, between AV control unit and GPS antenna and between AV control unit and satellite radio antenna.

Self-Diagnosis

AV

Revision: 2009 September

AV-587

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Mode Display Diagnosis

[BOSE AUDIO WITH NAVIGATION]


Description The following check functions are available: color tone check by color bar display, light and shade check by gray scale display and touch panel calibration response check. Diagnosis of signals can be performed for vehicle speed, parking brake, lights, ignition switch, and reverse. The connection of a speaker can be confirmed by test tone. Not used. Steering Angle Adjustment When there is a difference between the actual turning angle and the vehicle mark turning angle, it can be adjusted. When there is a difference between the current location mark and the actual location, it can be adjusted. The XM NavTraffic subscription status can be checked. The system malfunction and the frequency when occurring in the past are displayed. When the malfunctioning item is selected, the time and place that the selected malfunction last occurred are displayed. The transmitting/receiving of CAN communication can be monitored. The communication condition of each unit of MULTI AV system can be monitored. The received volume adjustment of hands-free phone, microphone speaker check, and erase memory can be performed. The signal connected to camera control unit can be checked and the guiding line position that overlaps rear view camera image can be adjusted. The passkey and the device name can be checked and changed. Change Channel Any necessary channels required to receive traffic information from the satellite radio system can be set. Any application ID'-s required to receive traffic information from the satellite radio system can be set. Not used. Erase the connection history of unit and error history. Initializes the AV control unit memory.

Vehicle Signals Speaker Test Climate Control*

Navigation

Speed Calibration XM SAT Subscription Status

Confirmation/ Adjustment

Error History Vehicle CAN Diagnosis AV COMM Diagnosis Handsfree Phone

Camera Cont. Bluetooth

SAT

Change Application ID Diag

Delete Unit Connection Log Initialize Settings NOTE:

*: On-board self-diagnosis is not supported. Only CONSULT-III is supported.

STARTING PROCEDURE
1. 2. 3. Start the engine. Turn the audio system OFF. While pressing the SETTING button, turn the volume control dial clockwise or counterclockwise for 40 clicks or more. (When the self-diagnosis mode is started, a short beep will be heard.) Shifting from current screen to previous screen is performed by pressing the BACK button.

JSNIA1075GB

Revision: 2009 September

AV-588

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > 4. The trouble diagnosis initial screen is displayed, and then the items of Self Diagnosis and Confirmation/Adjustment can be selected.

C
JSNIA0061GB

SELF-DIAGNOSIS MODE
1. Start the self-diagnosis function and select Self Diagnosis. Self-diagnosis subdivision screen is displayed, and the selfdiagnosis mode starts. The bar graph visible on the center of the self-diagnosis subdivision screen indicates progress of the trouble diagnosis.

G
JSNIA0062GB

2.

Diagnosis results are displayed after the self-diagnosis is completed. The unit names and the connection lines are color-coded according to the diagnostic results. Connection line Green Yellow Green

Diagnosis results Normal Connection malfunction Unit malfunction Note


NOTE:

Unit Green Gray Red

Only the control unit (AV control unit) is displayed in red. The number of units that is displayed on the on board self-diagnosis display according to equipment. Replace AV control unit if Self-Diagnosis did not run because of a control unit malfunction is indicated. The symptom is AV control unit internal error. Refer to AV-787, "Exploded View".

If multiple errors occur at the same time for a single unit, the screen switch colors are determined according to the following order of priority: red > gray.
JSNIA0593GB

AV

Revision: 2009 September

AV-589

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > The comments of the self-diagnosis results can be viewed with a component in the diagnosis result screen.

JSNIA0064GB

SELF-DIAGNOSIS RESULTS
The self-diagnosis mode allows the technician to diagnose the connection in the communication line between AV control unit and each unit and the internal operation of the AV control unit. Because the start condition of diagnosis function is a switch operation, the on board diagnosis function cannot be started up if any malfunction is detected in the communication circuit between AV control unit and multifunction switch. Check the applicable display at the following table, and then repair the malfunctioning parts.
Self-diagnosis Result Chart
Diagnosis results Detection logic Possible malfunction location / Action to take

Malfunction is detected in AV control unit power supply and ground circuits.

Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit.

JSNIA0594GB

NOTE: When a control unit malfunction is detected (red in unit display), connection malfunctions with other connection unit may be displayed. Self-Diagnosis did not run because of a control unit malfunction

Revision: 2009 September

AV-590

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis results Detection logic

[BOSE AUDIO WITH NAVIGATION]


Possible malfunction location / Action to take

B
Malfunction is detected in cameraconnection recognition signal circuit. Camera connection recognition signal circuit.

D
JSNIA0596GB

F
GPS antenna connection malfunction is detected. GPS antenna.

JSNIA0597GB

I
Satellite radio antenna connection malfunction is detected. Satellite radio antenna feeder. Antenna base.

K
JSNIA0598GB

AV

Revision: 2009 September

AV-591

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis results Detection logic

[BOSE AUDIO WITH NAVIGATION]


Possible malfunction location / Action to take

When either one of the following items are detected: serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning.
JSNIA0599GB

Serial communication circuits between AV control unit and front display unit.

When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning.
JSNIA0600GB

iPod adapter power supply and ground circuits. AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch. AV communication circuits between camera control unit and iPod adapter.

NOTE: The number of units that is displayed on the on board self-diagnosis display according to equipment.

CONFIRMATION/ADJUSTMENT MODE
1. 2. Start the diagnosis function and select Confirmation/Adjustment. The confirmation/adjustment mode indicates where each item can be checked or adjusted. Select each switch on the Confirmation/Adjustment Mode screen to display the relevant trouble diagnosis screen. Press the BACK switch to return to the initial Confirmation/Adjustment Mode screen.

JSNIA0617GB

Revision: 2009 September

AV-592

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Display Diagnosis A

[BOSE AUDIO WITH NAVIGATION]

JSNIA0689GB

The tint of the color bar indication is as per the following list if RGB signal error is detected. R (red) signal error G (green) signal error B (blue) signal error : Light blue (Cyan) tint : Purple (Magenta) tint : Yellow tint

Vehicle Signals A comparison check can be made of each actual vehicle signal and the signals recognized by the system.

AV

JSNIA0075GB

Revision: 2009 September

AV-593

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Diagnosis item Vehicle speed Display ON OFF ON OFF ON OFF ON OFF ON Reverse OFF Vehicle status Vehicle speed > 0 km/h (0 MPH) Vehicle speed = 0 km/h (0 MPH) Parking brake is applied. Parking brake is released. Light switch ON Light switch OFF Ignition switch ON Ignition switch in the ACC position Shift the selector lever to the R position Shift the selector lever to a position other than the R position Changes in indication may be delayed. This is normal.

[BOSE AUDIO WITH NAVIGATION]


Remarks

Parking brake

Lights

Ignition

Changes in indication may be delayed. This is normal.

Speaker Test Select SPEAKER DIAGNOSIS to display the Speaker Diagnosis screen. Press START and NEXT to generate a test tone in a speaker. Press Start to generate a test tone in the next speaker. Press End to stop the test tones. NOTE: The frequency of test tone emitted from each speaker is as follows.

Tweeter Front speaker Rear speaker

: 3 kHz : 300 Hz : 1 kHz


JSNIA0076GB

Climate Control On-board self-diagnosis is not supported. Only CONSULT-III is supported. Refer to HAC-161, "CONSULT-III Function" [with 7 inch display]. Navigation STEERING ANGLE ADJUSTMENT The steering angle output value detected with the gyroscope is adjusted.

JSNIA0077GB

SPEED CALIBRATION

Revision: 2009 September

AV-594

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > During normal driving, distance error caused by tire wear and tire pressure change is automatically adjusted for by the automatic distance correction function. This function, on the other hand, is for immediate adjustment, in cases such as driving with tire chain fitted on tires.

C
JSNIA0078GB

XM SAT SUBSCRIPTION STATUS The XM NavTraffic subscription status can be checked.


E

G
JSNIA0089GB

H Error History The self-diagnosis results are judged depending on whether any error occurs from when Self-diagnosis is selected until the self-diagnosis results are displayed. I However, the diagnosis results are judged normal if an error has occurred before the ignition switch is turned ON and then no error has occurred until the self-diagnosis start. Check the Error Record to detect any error that may have occurred before the self-diagnosis start because of this situation. The error record displays the time and place of the most recent occurrence of that error. However, take note of J the following points. If there is a malfunction with the GPS antenna circuit board in the AV control unit, the correct date and time of occurrence may not be able to be displayed. Place of the error occurrence is represented by the position of the current location mark at the time the error K occurred. If the current location mark has deviated from the correct position, then the place of the error occurrence cannot be correctly located. The frequency of occurrence is displayed in a count up manner. The actual count up method differs depend- L ing on the error item. Count up method A The counter resets to 0 if an error occurs when IGN switch is turned ON. The counter increases by 1 if the M condition is normal at a next IGN ON cycle. The counter upper limit is 39. Any counts exceeding 39 are ignored. The counter can be reset (no error record display) with the Delete log switch or CONSULT-III. Count up method B AV The counter increases by 1 if an error occurs when IGN switched is ON. The counter will not decrease even if the status is normal at the next IGN ON cycle. The counter upper limit is 50. Any counts exceeding 50 are ignored. The counter can be reset (no error O record display) with the Delete log switch or CONSULT-III.
Display type of occurrence frequency Count up method A Count up method B Error history display item CAN communication line, control unit (CAN), AV communication line, control unit (AV communication) Other than the above

Revision: 2009 September

AV-595

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION > [BOSE AUDIO WITH NAVIGATION]

JSNIA0079GB

Error item Some error items may be displayed simultaneously according to the cause. If some error items are displayed simultaneously, the detection of the cause can be performed by the combination of display items
Error item Description Possible malfunction factor/Action to take Perform diagnosis with CONSULT-III, and then repair the malfunctioning parts according to the diagnosis results. Refer to AV-601, "CONSULT-III Function (MULTI AV)".

CAN COMM CIRCUIT

CAN communication malfunction is detected.

CONTROL UNIT (CAN) CONTROL UNIT (AV) FLASH-ROM Error Of Control Unit Connection Of Gyro XM SERIAL COMM Error CAN Controller Memory Error Bluetooth Module Connection Error HDD CONN Error HDD READ Error HDD WRITE Error HDD COMM Error HDD ACCESS Error DSP CONN Error DSP COMM Error

CAN initial diagnosis malfunction is detected. AV communication circuit initial diagnosis malfunction is detected.

Replace the AV control unit. AV control unit malfunction is detected.

Internal Communication Error

Malfunction is detected in AV control unit power supply and ground circuits.

Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit. An intermittent error caused by strong radio interference may be detected unless a symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly.

GPS Communication Error GPS ROM Error GPS RAM Error GPS RTC Error GPS malfunction is detected.

Revision: 2009 September

AV-596

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item Description When either one of the following items are detected: front display unit power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning. GPS antenna connection malfunction is detected. Malfunction is detected in camera connection recognition circuit between AV control unit and camera control unit. Satellite radio antenna connection malfunction is detected. Malfunction is detected in AV control unit power supply and ground circuits. When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning. AV communication signal between AV control unit and multifunction switch is malfunctioning. When either one of the following items are detected: camera control unit power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and camera control unit is malfunctioning. AV communication signal between AV control unit and camera control unit is malfunctioning. When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning. Malfunction is detected in AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch.

[BOSE AUDIO WITH NAVIGATION]


Possible malfunction factor/Action to take

Front Display Connection Error

Front display unit power supply and ground circuits. Serial communication circuits between AV control unit and display unit.

GPS Antenna Error

GPS antenna. Camera-connection recognition circuit between AV control unit and camera control unit. Satellite radio antenna feeder. Antenna base. Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit.

Camera Control Unit Connection Error

XM Antenna Connection Error

AV COMM CIRCUIT Internal Communication Error

AV COMM CIRCUIT Switches Connection Error

Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.

AV COMM CIRCUIT Rearview Camera Connection Error

Camera control unit power supply and ground circuits. AV communication circuits between multifunction switch and camera control unit.

M
iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch unit and iPod adapter.

AV COMM CIRCUIT iPod Connection Error

AV

O
AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch.

AV COMM CIRCUIT Rearview Camera Connection Error iPod Connection Error*

Revision: 2009 September

AV-597

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item AV COMM CIRCUIT Switches Connection Error Rearview Camera Connection Error iPod Connection Error* AV COMM CIRCUIT Internal Communication Error Switches Connection Error Rearview Camera Connection Error Description Malfunction is detected in AV communication circuits between AV control unit and multifunction switch.

[BOSE AUDIO WITH NAVIGATION]


Possible malfunction factor/Action to take AV communication circuits between AV control unit and the junction of camera control unit and multifunction switch.

Malfunction is detected in AV communication circuits.

Check and repair the short circuit in AV communication circuits.

iPod Connection Error* NOTE: *: Non-equipped item is not displayed.

Vehicle CAN Diagnosis CAN communication status and error counter is displayed. The error counter displays OK if any malfunction was not detected in the past and displays 0 if a malfunction is detected. It increases by 1 if the status is normal at the next ignition switch ON cycle. The upper limit of the counter is 39. The error counter is erased if Reset is pressed.
Malfunction counter (Past) OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39
JSNIA0080GB

Items Tx (HVAC) Rx (ECM) Rx (Cluster) Rx (BCM) Rx (HVAC) Rx (USM)

Display (Current) OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN

AV COMM Diagnosis Displays the communication status between AV control unit (master unit) and each unit. The error counter displays OK if any malfunction was not detected in the past and displays 0 if a malfunction is detected. It increases by 1 if the condition is normal at the next ignition switch ON cycle. The upper limit of the counter is 39. The error counter is erased if Reset is pressed.
Status (Current) OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN OK / UNKWN Counter (Past) OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39 OK / 0 39
JSNIA0081GB

Items C Tx(ITMPrimarySW) C Rx(PrimarySWITM) C Rx(STRG SWITM) C Rx (AudioITM) C Rx(AmpITM) C Rx(RearCameraITM) C Rx(XMITM) C Rx(iPodITM) C Rx(AmpAudio) C Rx(iPodAudio) C Tx(AudioITM) NOTE:

Any units with displayed have no history of vehicle connection.

Revision: 2009 September

AV-598

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
STRG SW, AmpXM indicate the same status as Audio.

[BOSE AUDIO WITH NAVIGATION]


A

Audio and Amp indicate the same status because Amp indicates the status of the amplifier integrated in the AV control unit.

Hands-Free Phone The hands-free phone reception volume adjustment, microphone and speaker test, and memory erase functions are also available.

JSNIA0083GB

Camera Cont. The two functions of Connection Confirmation and Adjust Offset of Rear View Camera are available. CONNECTION CONFIRMATION The steering angle sensor, reverse signal and vehicle speed sensor can be inspected.

JSNIA0084GB

Diagnosis item

Display ON

Vehicle status When steering the vehicle with ignition switch ON (remains ON until connection mode is stopped when it is turned ON) Ignition switch at ACC No steering with ignition switch ON Malfunction detected in camera connection recognition signal Selector lever is in R with ignition switch ON. Ignition switch at ACC Selector lever is in position other than R with ignition switch ON. Malfunction detected in camera-connection recognition signal Vehicle speed is more than 0 km/h (0 MPH) with ignition switch ON Ignition switch at ACC Vehicle speed is 0 km/h (0 MPH) with ignition switch ON Malfunction detected in camera connection recognition signal Not used

Steer. Angle Sensor

OFF ON

Reverse Sensor

OFF ON

Vehicle Speed Sensor

OFF

AV

Side view Switch

ADJUST OFFSET OF REAR VIEW CAMERA


P

Revision: 2009 September

AV-599

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > Use this mode to adjust the guide line display position of the rearview monitor if necessary after removing the rear view monitor camera.

JSNIA0085GB

Bluetooth Confirm / Change Passkey The Bluetooth passkey can be confirmed and changed. The passkey can be changed by four digits within 0 to 9.

JSNIA0086GB

Confirm / Change Device Name The Bluetooth device name be confirmed and changed. The device name can be changed by sixteen digits from A to Z (small characters can be used) and - (hyphens).

JSNIA0087GB

SAT Change Channel - Any necessary channels required to receive traffic information from the satellite radio system can be set.

JSNIA0092GB

Revision: 2009 September

AV-600

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > Change Application ID - Any application ID'-s required to receive traffic information from the satellite radio system can be set.

C
JSNIA0093GB

D Delete Unit Connection Log Deletes any unit connection records and error records from the AV control unit memory. (Clear the records of the unit that has been removed.)

G
JSNIA0088GB

Initialize Settings Deletes data stored in HDD.

K
JSNIA0095GB

CONSULT-III Function (MULTI AV)


CONSULT-III FUNCTIONS
CONSULT-III performs the following functions via the communication with the AV control unit.
Diagnosis mode Ecu Identification Self Diagnostic Result Data Monitor Description The part number of AV control unit can be checked.

INFOID:0000000005528696

AV

Performs a diagnosis on the AV control unit and a connection diagnosis for the communication circuit of the MULTI AV system, and displays the current and past malfunctions collectively. The diagnosis of vehicle signal that is input to the AV control unit can be performed.

AV COMMUNICATION
When AV communication of CAN Diag Support Monitor is selected, the following function will be performed.
AV&NAVI C/U AUDIO Displays the communication status from AV control unit to each unit as well as the error counter. Displays the AV control unit communication status and the error counter.

AV communication

ECU IDENTIFICATION
The part number of AV control unit is displayed.
Revision: 2009 September

AV-601

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


[BOSE AUDIO WITH NAVIGATION] < SYSTEM DESCRIPTION > SELF DIAGNOSIS RESULT In CONSULT-III self-diagnosis, self-diagnosis results and error history are displayed collectively. A current malfunction indicates crnt. a past malfunction indicates past. The timing is displayed as 0 if any of the error codes [U1000], [U1010], [U1300] and [U1310] is detected. the counter increases by 1 if the status is normal at the next ignition switch on cycle.
Self-diagnosis Results Display Item
Error item CAN COMM CIRCUIT [U1000] CONTROL UNIT (CAN) [U1010] CONTROL UNIT (AV) [U1310] Control Unit FLASH-ROM [U1200] Gyro NO CONN [U1201] CAN CONT [U1216] BLUETOOTH CONN [U1217] HDD CONN [U1218] HDD READ [U1219] XM SERIAL COMM [U1220] HDD WRITE [U121A] HDD COMM [U121B] HDD ACCESS [U121C] DSP CONN [U121D] DSP COMM [U121E] Malfunction is detected in AV control unit power supply and ground circuits. Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit. An intermittent error caused by strong radio interference may be detected unless a symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly. AV control unit malfunction is detected. Replace the AV control unit. Description CAN communication malfunction is detected. CAN initial diagnosis malfunction is detected. AV communication circuit initial diagnosis malfunction is detected. Possible malfunction factor/Action to take Refer to AV-605, "Diagnosis Procedure".

INTERNAL COMM [U121F]

GPS COMM [U1204] GPS ROM [U1205] GPS RAM [U1206] GPS RTC [U1207] When either one of the following items are detected: front display unit power supply and ground circuits are malfunctioning. serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning. GPS antenna connection malfunction is detected. Malfunction is detected in camera connection recognition circuit between AV control unit and camera control unit. Satellite radio antenna connection malfunction is detected. GPS malfunction is detected.

FRONT DISP CONN [U1243]

Front display unit power supply and ground circuits. Serial communication circuits between AV control unit and display unit.

GPS ANTENNA CONN [U1244]

GPS antenna. Camera-connection recognition circuit between AV control unit and camera control unit. Satellite radio antenna feeder. Antenna base.

CAMERA CONT CONN [U1250]

XM ANTENNA CONN [U1258]

Revision: 2009 September

AV-602

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Error item AV COMM CIRCUIT [U1300] INTERNAL COMM [U121F] Description Malfunction is detected in AV control unit power supply and ground circuits. When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning. AV communication signal between AV control unit and multifunction switch is malfunctioning. When either one of the following items are detected: camera control unit power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and camera control unit is malfunctioning. AV communication signal between AV control unit and camera control unit is malfunctioning. When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning. Malfunction is detected in AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch. Malfunction is detected in AV communication circuits between AV control unit and multifunction switch.

[BOSE AUDIO WITH NAVIGATION]


Possible malfunction factor/Action to take Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit.

AV COMM CIRCUIT [U1300] SWITCH CONN [U1240]

Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252]

Camera control unit power supply and ground circuits. AV communication circuits between multifunction switch and camera control unit.

H
iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch unit and iPod adapter.

AV COMM CIRCUIT [U1300] IPod CONN [U1254]

J
AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch. AV communication circuits between AV control unit and the junction of camera control unit and multifunction switch.

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254]* AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254]* AV COMM CIRCUIT [U1300] INTERNAL COMM [U121F] SWITCH CONN [U1240] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254]*

M
Malfunction is detected in AV communication circuits. Check and repair the short circuit in AV communication circuits.

AV

NOTE: *: Non-equipped item is not displayed.

DATA MONITOR
All Signals Displays the status of the following vehicle signals inputted into the AV control unit. For each signal, the actual signal can be compared with the status recognized on the system. P

Revision: 2009 September

AV-603

2010 Murano

DIAGNOSIS SYSTEM (AV CONTROL UNIT)


< SYSTEM DESCRIPTION >
Display Item VHCL SPD SIG Display On Off On Off On ILLUM SIG Off On Off On REV SIG Off Vehicle status Vehicle speed >0 km/h (0 MPH) Vehicle speed =0 km/h (0 MPH) Parking brake is applied. Parking brake is released. Block the light beam from the auto light optical sensor when the light SW is ON. Expose the auto light optical sensor to light when the light SW is OFF or ON. Ignition switch ON Ignition switch in the ACC position Selector lever in the R position Selector lever in any position other than the R position Changes in indication may be delayed. This is normal. Changes in indication may be delayed. This is normal.

[BOSE AUDIO WITH NAVIGATION]


Remarks

PKB SIG

IGN SIG

Selection From Menu allows the technician to select which vehicle signals should be displayed and displays the status of the selected vehicle signals.
Item to be selected VHCL SPD SIG PKB SIG ILLUM SIG IGN SIG REV SIG The same as when ALL SIGNALS is selected. Description

Revision: 2009 September

AV-604

2010 Murano

U1000 CAN COMM CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A

DTC/CIRCUIT DIAGNOSIS
U1000 CAN COMM CIRCUIT
Description
INFOID:0000000005528697

CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-vehicle multiplex communication line with high data communication speed and excellent error detection ability. Many electronic control units are equipped onto a vehicle, and each control unit shares information and links with other control units during operation (not independently). In CAN communication, control units are connected with 2 communication lines (CAN-H, CAN-L) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to LAN-27, "CAN Communication Signal Chart".

DTC Logic
DTC DETECTION LOGIC
DTC Display contents of CONSULT-III CAN COMM CIRCUIT Diagnostic item is detected when... AV control unit is not transmitting or receiving CAN communication signal for 2 seconds or more.

INFOID:0000000005528698

Probable malfunction location

U1000

CAN communication system.

Diagnosis Procedure

INFOID:0000000005528699

1.PERFORM SELF-DIAGNOSTIC
1. Turn ignition switch ON and wait for 2 seconds or more. 2. Check Self Diagnostic Result of MULTI AV. Is CAN COMM CIRCUIT displayed? YES >> Refer to LAN system. Refer to LAN-17, "Trouble Diagnosis Flow Chart". NO >> Refer to GI section. Refer to GI-39, "Intermittent Incident".
I

AV

Revision: 2009 September

AV-605

2010 Murano

U1010 CONTROL UNIT (CAN)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1010 CONTROL UNIT (CAN)


Description
Initial diagnosis of AV control unit.
INFOID:0000000005528700

DTC Logic
DTC DETECTION LOGIC
DTC U1010 Display contents of CONSULT-III CONTROL UNIT (CAN) Diagnostic item is detected when... CAN initial diagnosis malfunction is detected.

INFOID:0000000005528701

Probable malfunction location AV control unit.


INFOID:0000000005528702

Diagnosis Procedure

1.REPLACE AV CONTROL UNIT


When DTC U1010 is detected, replace AV control unit. >> INSPECTION END

Revision: 2009 September

AV-606

2010 Murano

U1310 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528703

U1310 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC U1310 Display contents of CONSULT-III CONTROL UNIT (AV) [U1310] DTC Detection Condition An initial diagnosis error is detected in AV communication circuit.

INFOID:0000000005528704

Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-607

2010 Murano

U1200 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1200 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528705

AV CONTROL UNIT

DTC Logic
DTC Display contents of CONSULT-III Cont Unit FLASH-ROM [U1200] DTC Detection Condition An internal malfunction is detected in AV control unit (FLASH-ROM).

INFOID:0000000005528706

Action to take

U1200

Replace AV control unit.

Revision: 2009 September

AV-608

2010 Murano

U1201 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528707

U1201 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC U1201 Display contents of CONSULT-III GYRO NO CONN [U1201] DTC Detection Condition Internal malfunction of AV control unit (gyrocompass disconnection) is detected.

INFOID:0000000005528708

Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-609

2010 Murano

U1216 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1216 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528709

AV CONTROL UNIT

DTC Logic
DTC U1216 Display contents of CONSULT-III CAN CONT [U1216] DTC Detection Condition Internal malfunction of AV control unit (CAN controller) is detected.

INFOID:0000000005528710

Action to take Replace AV control unit.

Revision: 2009 September

AV-610

2010 Murano

U1217 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528711

U1217 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC Display contents of CONSULT-III BLUETOOTH MODULE CONN [U1217] DTC Detection Condition Internal malfunction of AV control unit (Bluetooth module connection malfunction) is detected.

INFOID:0000000005528712

Action to take

U1217

Replace AV control unit.

AV

Revision: 2009 September

AV-611

2010 Murano

U1218 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1218 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528713

AV CONTROL UNIT

DTC Logic
DTC U1218 Display contents of CONSULT-III HDD-CONN [U1218] DTC Detection Condition Internal malfunction of AV control unit (HDD connection malfunction) is detected.

INFOID:0000000005528714

Action to take Replace AV control unit.

Revision: 2009 September

AV-612

2010 Murano

U1219 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528715

U1219 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC U1219 Display contents of CONSULT-III HDD-READ [U1219] DTC Detection Condition

INFOID:0000000005528716

Action to take

Internal malfunction of AV control unit (HDD read malfuncReplace AV control unit. tion) is detected.

AV

Revision: 2009 September

AV-613

2010 Murano

U1220 AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1220 AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528717

AV CONTROL UNIT

DTC Logic
DTC U1220 Display contents of CONSULT-III XM SERIAL COMM [U1220] DTC Detection Condition Internal malfunction of AV control unit (satellite radio tuner communication error) is detected.

INFOID:0000000005528718

Action to take Replace AV control unit.

Revision: 2009 September

AV-614

2010 Murano

U121A AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528719

U121A AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC U121A Display contents of CONSULT-III HDD-WRITE [U121A] DTC Detection Condition Internal malfunction of AV control unit (HDD write malfunction) is detected.

INFOID:0000000005528720

Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-615

2010 Murano

U121B AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U121B AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528721

AV CONTROL UNIT

DTC Logic
DTC U121B Display contents of CONSULT-III HDD-COMM [U121B] DTC Detection Condition Internal malfunction of AV control unit (HDD communication error) is detected.

INFOID:0000000005528722

Action to take Replace AV control unit.

Revision: 2009 September

AV-616

2010 Murano

U121C AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528723

U121C AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC U121C Display contents of CONSULT-III HDD-ACCESS [U121C] DTC Detection Condition Internal malfunction of AV control unit (HDD access error) is detected.

INFOID:0000000005528724

Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-617

2010 Murano

U121D AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U121D AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528725

AV CONTROL UNIT

DTC Logic
DTC U121D Display contents of CONSULT-III DSP CONN [U121D] DTC Detection Condition Internal malfunction of AV control unit (DSP connection error) is detected.

INFOID:0000000005528726

Action to take Replace AV control unit.

Revision: 2009 September

AV-618

2010 Murano

U121E AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528727

U121E AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC U121E Display contents of CONSULT-III DSP COMM [U121E] DTC Detection Condition Internal malfunction of AV control unit (DSP communication error) is detected.

INFOID:0000000005528728

Action to take Replace AV control unit.

AV

Revision: 2009 September

AV-619

2010 Murano

U121F AV CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U121F AV CONTROL UNIT


Description
Replace the AV control unit if this DTC is displayed. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM, A/C auto amp. and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.
INFOID:0000000005528729

AV CONTROL UNIT

DTC Logic
DTC U121F Display contents of CONSULT-III INTERNAL COMM [U121F] DTC Detection Condition Internal malfunction of AV control unit (internal communication error) is detected.

INFOID:0000000005528730

Action to take AV control unit power supply and ground circuit.


INFOID:0000000005528731

Diagnosis Procedure

1.CHECK AV CONTROL UNIT POWER SUPPLY AND GROUND CIRCUIT


Check AV control unit power supply and ground circuit. Refer to AV-631, "AV CONTROL UNIT : Diagnosis Procedure". Is the inspection result normal? YES >> Replace AV control unit. NO >> Repair or replace malfunctioning parts.

Revision: 2009 September

AV-620

2010 Murano

U1204 GPS
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528732

U1204 GPS
Description
An intermittent error caused by strong radio interference may be detected unless any symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

H
INFOID:0000000005528733

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition

I
Action to take An intermittent error caused by strong radio interference may be detected unless a symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly.
INFOID:0000000005528734

U1204

GPS CONN [U1204]

Internal malfunction of AV control unit (GPS malfunction) is detected.

Diagnosis Procedure

1.PERFORM THE SELF-DIAGNOSIS


1. Delete the self-diagnosis results. Turn ignition switch OFF. 2. Turn ignition switch ON. Perform the self-diagnosis again. 3. Check that the DTC is detected again. Is any DTC detected? YES >> Replace AV control unit. NO >> The intermittent malfunction caused by strong radio interference can be detected.
M AV

Revision: 2009 September

AV-621

2010 Murano

U1205 GPS
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1205 GPS
Description
INFOID:0000000005528735

An intermittent error caused by strong radio interference may be detected unless any symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition

INFOID:0000000005528736

Action to take An intermittent error caused by strong radio interference may be detected unless a symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly.
INFOID:0000000005528737

U1205

GPS ROM [U1205]

Internal malfunction of AV control unit (GPS malfunction) is detected.

Diagnosis Procedure

1.PERFORM THE SELF-DIAGNOSIS


1. Delete the self-diagnosis results. Turn ignition switch OFF. 2. Turn ignition switch ON. Perform the self-diagnosis again. 3. Check that the DTC is detected again. Is any DTC detected? YES >> Replace AV control unit. NO >> The intermittent malfunction caused by strong radio interference can be detected.

Revision: 2009 September

AV-622

2010 Murano

U1206 GPS
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528738

U1206 GPS
Description
An intermittent error caused by strong radio interference may be detected unless any symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

H
INFOID:0000000005528739

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition

I
Action to take An intermittent error caused by strong radio interference may be detected unless a symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly.
INFOID:0000000005528740

U1206

GPS RAM [U1206]

Internal malfunction of AV control unit (GPS malfunction) is detected.

Diagnosis Procedure

1.PERFORM THE SELF-DIAGNOSIS


1. Delete the self-diagnosis results. Turn ignition switch OFF. 2. Turn ignition switch ON. Perform the self-diagnosis again. 3. Check that the DTC is detected again. Is any DTC detected? YES >> Replace AV control unit. NO >> The intermittent malfunction caused by strong radio interference can be detected.
M AV

Revision: 2009 September

AV-623

2010 Murano

U1207 GPS
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1207 GPS
Description
INFOID:0000000005528741

An intermittent error caused by strong radio interference may be detected unless any symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly. Refer to AV-787, "Exploded View".
Part name Description Integrates hard disk drive (HDD) allowing map data and music data to be stored. It is the master unit of the MULTI AV system, and it is connected to each control unit by communication. It operates each system according to communication signals from the AV control unit. The AV control unit includes the audio, hands-free phone, voice control, navigation, satellite radio, and vehicle information functions. It is connected to ECM and combination meter via CAN communication to obtain necessary information for the vehicle information function. It is connected to BCM via CAN communication transmitting/receiving for the vehicle settings function. It inputs the illumination signals that are required for the display dimming control. It inputs the signals for driving status recognition (vehicle speed, reverse and parking brake). Update of map data is performed with the CONSULT-III and the applicable cable. It includes the TEL adapter and Bluetooth function.

AV CONTROL UNIT

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition

INFOID:0000000005528742

Action to take An intermittent error caused by strong radio interference may be detected unless a symptom (GPS reception error, etc.) occurs. Replace the AV control unit if the malfunction occurs constantly.
INFOID:0000000005528743

U1207

GPS RTC [U1207]

Internal malfunction of AV control unit (GPS malfunction) is detected.

Diagnosis Procedure

1.PERFORM THE SELF-DIAGNOSIS


1. Delete the self-diagnosis results. Turn ignition switch OFF. 2. Turn ignition switch ON. Perform the self-diagnosis again. 3. Check that the DTC is detected again. Is any DTC detected? YES >> Replace AV control unit. NO >> The intermittent malfunction caused by strong radio interference can be detected.

Revision: 2009 September

AV-624

2010 Murano

U1243 DISPLAY UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528744

U1243 DISPLAY UNIT


Description
Part name Description Front display image is controlled by the serial communication from AV control unit. RGB image signal is input from AV control unit (RGB, RGB area and RGB synchronizing). Auxiliary image signal is input from the auxiliary input jack. Camera image signal is input from camera control unit. Synchronize signal (HP, VP) is output to AV control unit. Touch panel function can be operated for each system by touching a display directly.
INFOID:0000000005528745

FRONT DISPLAY UNIT

DTC Logic
DTC Display contents of CONSULT-III DTC Detection Condition When either one of the following items are detected: serial communication circuits between AV control unit and front display unit are malfunctioning. serial communication signal between AV control unit and front display unit is malfunctioning.

Possible causes Front display unit power supply and ground circuits. Serial communication circuits between AV control unit and display unit.
INFOID:0000000005528746

U1243

FRONT DISP CONN [U1243]

Diagnosis Procedure

1.CHECK FRONT DISPLAY UNIT POWER SUPPLY AND GROUND CIRCUIT


Check front display unit power supply and ground circuit. Refer to AV-631, "FRONT DISPLAY UNIT : Diagnosis Procedure". Is the inspection result normal? YES >> GO TO 2. NO >> Repair malfunctioning parts.

2.CHECK CONTINUITY COMMUNICATION CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminals 11 22 AV control unit Connector M146 Terminals 70 71

Continuity

Existed

AV

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminals 11 22 Ground Not existed

Continuity

Is the inspection result normal? YES >> GO TO 3. NO >> Repair harness or connector.

3.CHECK COMMUNICATION SIGNAL


1. Connect front display unit connector and AV control unit connector.
Revision: 2009 September

AV-625

2010 Murano

U1243 DISPLAY UNIT


[BOSE AUDIO WITH NAVIGATION] < DTC/CIRCUIT DIAGNOSIS > 2. Turn ignition switch ON. 3. Check signal between front display unit harness connector terminal and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

11

Ground

When adjusting display bright ness.

PKIB5039J

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK COMMUNICATION SIGNAL


Check signal between display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

22

Ground

When adjusting display bright ness.

PKIB5039J

Is the inspection result normal? YES >> INSPECTION END NO >> Replace front display unit.

Revision: 2009 September

AV-626

2010 Murano

U1244 GPS ANTENNA


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528747

U1244 GPS ANTENNA


Description
Part name GPS ANTENNA Description GPS signal is received and transmitted to AV control unit.

DTC Logic
DTC U1244 Display contents of CONSULT-III GPS ANTENNA CONN [U1244] DTC Detection Condition GPS antenna connection malfunction is detected.

C
INFOID:0000000005528748

D
Possible causes GPS antenna disconnection.
INFOID:0000000005528749

Diagnosis Procedure

1.GPS ANTENNA CHECK


Visually check GPS antenna and antenna feeder. Is the inspection result normal? YES >> GO TO 2. NO >> Repair malfunctioning parts.

2.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Disconnect GPS antenna connector. Turn ignition switch ON. Check voltage between AV control unit terminal and ground.
(+) AV control unit Connector M380 Terminal 110 Ground 5.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> INSPECTION END NO >> Replace AV control unit.

AV

Revision: 2009 September

AV-627

2010 Murano

U1250 CAMERA CONTROL UNIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1250 CAMERA CONTROL UNIT


Description
Part name Description Camera image signal is input from rear view camera, and camera image is indicated on the display. Power (camera ON signal) is transmitted to rear view camera. Controlled by AV communication transmitted from AV control unit. AV control unit recognizes the presence of camera system with camera connection recognition signal.
INFOID:0000000005528751 INFOID:0000000005528750

CAMERA CONTROL UNIT

DTC Logic
DTC Display contents of CONSULT-III CAMERA CONT. CONN [U1250] DTC Detection Condition Malfunction is detected in camera connection recognition circuit between AV control unit and camera control unit.

Possible causes Camera-connection recognition circuit between AV control unit and camera control unit.
INFOID:0000000005528752

U1250

Diagnosis Procedure

1.CHECK CAMERA-CONNECTION RECOGNITION SIGNAL CIRCUIT


1. 2. Disconnect AV control unit connector and camera control unit connector. Check continuity between AV control unit harness connector and camera control unit harness connector.
AV control unit Connector M145 Terminal 40 Camera control unit Connector B60 Terminal 14

Continuity Existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector. Turn ignition switch ON. Check voltage between AV control unit harness connector and ground.
(+) AV control unit Connector M145 Terminal 40 Ground 5.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> Replace camera control unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-628

2010 Murano

U1258 SATELLITE RADIO ANTENNA


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528753

U1258 SATELLITE RADIO ANTENNA


Description
Part name SATELLITE RADIO ANTENNA Description Satellite radio waves are received and transmitted to AV control unit.

DTC Logic
DTC U1258 Display contents of CONSULT-III XM ANTENNA CONN [U1258] DTC Detection Condition Satellite radio antenna connection malfunction is detected.

C
INFOID:0000000005528754

D
Possible causes Satellite radio antenna feeder. Satellite radio antenna.
INFOID:0000000005528755

Diagnosis Procedure

1.SATELLITE RADIO ANTENNA CHECK


Visually check satellite radio antenna and antenna feeder. Is the inspection result normal? YES >> GO TO 2. NO >> Repair malfunctioning parts.

2.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Disconnect satellite radio antenna connector. Turn ignition switch ON. Check voltage between AV control unit terminal and ground.
(+) AV control unit Connector M372 Terminal 108 Ground 5.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> INSPECTION END NO >> Replace AV control unit.

AV

Revision: 2009 September

AV-629

2010 Murano

U1300 AV COMM CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

U1300 AV COMM CIRCUIT


Description
INFOID:0000000005528756

U1300 is indicated when malfunction occurs in communication signal of multi AV system. Indicated simultaneously, without fail, with the malfunction of control units connected to AV control unit with communication line. Determine the possible malfunction cause from the table below.

SELF-DIAGNOSIS RESULTS DISPLAY ITEM


DTC Display contents of CONSULT-III AV COMM CIRCUIT [U1300] INTERNAL COMM [U121F] Description Possible malfunction factor/Action to take Check AV control unit power supply and ground circuits. When detecting no malfunction in those components, replace AV control unit. Multifunction switch power supply and ground circuits. AV communication circuits between AV control unit and multifunction switch.

U1300 U121F

Malfunction is detected in AV control unit power supply and ground circuits. When either one of the following items are detected: multifunction switch power supply and ground circuits are malfunctioning. AV communication circuits between AV control unit and multifunction switch are malfunctioning. AV communication signal between AV control unit and multifunction switch is malfunctioning. When either one of the following items are detected: camera control unit power supply and ground circuits are malfunctioning. AV communication circuits between multifunction and camera control unit are malfunctioning. AV communication signal between AV control unit and camera control unit is malfunctioning. When either one of the following items are detected: iPod adapter power supply and ground circuits are malfunctioning. AV communication circuits between multifunction switch and iPod adapter are malfunctioning. AV communication signal between AV control unit and iPod adapter is malfunctioning. Malfunction is detected in AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch.

U1300 U1240

AV COMM CIRCUIT [U1300] SWITCH CONN [U1240]

U1300 U1252

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252]

Camera control unit power supply and ground circuits. AV communication circuits between multifunction switch and camera control unit.

U1300 U1254

AV COMM CIRCUIT [U1300] IPod CONN [U1254]

iPod adapter power supply and ground circuits. AV communication circuits between multifunction switch unit and iPod adapter.

U1300 U1252 U1254*

AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254]* AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254]* AV COMM CIRCUIT [U1300] INTERNAL COMM [U121F] SWITCH CONN [U1240] REAR CAMERA LAN CONN [U1252] IPod CONN [U1254]*

AV communication circuits between camera control unit and the junction of AV control unit and multifunction switch.

U1300 U1240 U1252 U1254*

Malfunction is detected in AV communication circuits between AV control unit and multifunction switch.

AV communication circuits between AV control unit and the junction of camera control unit and multifunction switch.

U1300 U121F U1240 U1252 U1254*

Malfunction is detected in AV communication circuits.

Check and repair the short circuit in AV communication circuits.

NOTE: *: Non-equipped item is not displayed.

Revision: 2009 September

AV-630

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528757

POWER SUPPLY AND GROUND CIRCUIT


AV CONTROL UNIT
AV CONTROL UNIT : Diagnosis Procedure

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Ignition switch ON or START Fuse No. 35 19 3

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between AV control unit harness connectors and ground.
Signal name Connector No. M144 Battery power supply M145 M144 M145 M145 Terminal No. 19 22 24 7 25 35 ACC ON Battery voltage Battery voltage OFF Battery voltage Ignition switch position Value (Approx.)

ACC power supply Ignition signal

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between AV control unit and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect AV control unit connectors. Check continuity between AV control unit harness connectors and ground.
Signal name Ground Connector No. M145 Terminal No. 21 23 Ignition switch position OFF Continuity

M
Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

AV

FRONT DISPLAY UNIT


FRONT DISPLAY UNIT : Diagnosis Procedure
INFOID:0000000005528758

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Revision: 2009 September

AV-631

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


[BOSE AUDIO WITH NAVIGATION] < DTC/CIRCUIT DIAGNOSIS > Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between display unit harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. M49 Terminal No. 2 3 Ignition switch position OFF ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between Display unit and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect display unit connector. Check continuity between display unit harness connector and ground.
Signal name Ground Connector No. M49 Terminal No. 1 13 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

MULTIFUNCTION SWITCH
MULTIFUNCTION SWITCH : Diagnosis Procedure
INFOID:0000000005528759

1.CHECK FUSE
Check for blown fuses.
Power source Ignition switch ACC or ON Fuse No. 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between multifunction switch harness connector and ground.
Signal name ACC power supply Connector No. M125 Terminal No. 3 Ignition switch position ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between multifunction switch and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect multifunction switch connector. Check continuity between multifunction switch harness connector and ground.
Signal name Ground Connector No. M125 Terminal No. 1 Ignition switch position OFF Continuity Existed

Revision: 2009 September

AV-632

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector. [BOSE AUDIO WITH NAVIGATION]
A

CAMERA CONTROL UNIT


CAMERA CONTROL UNIT : Diagnosis Procedure
B
INFOID:0000000005528760

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between camera control unit harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. B60 Terminal No. 32 30 Ignition switch position OFF ACC Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between camera control unit and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector. Check continuity between camera control unit harness connector and ground.
Signal name Ground Connector No. B60 Terminal No. 31 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

BOSE AMP.
BOSE AMP. : Diagnosis Procedure
INFOID:0000000005528761

1.CHECK FUSE
Check for blown fuses.
Power source Battery Fuse No. 23, 24

AV

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between BOSE amp. harness connector and ground.

Revision: 2009 September

AV-633

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
Signal name Battery power supply Connector No. B224 Terminal No. 10 11

[BOSE AUDIO WITH NAVIGATION]


Ignition switch position OFF Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between BOSE amp. and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect BOSE amp. connector. Check continuity between BOSE amp. harness connector and ground.
Signal name Ground Connector No. B224 Terminal No. 7 12 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

WOOFER
WOOFER : Diagnosis Procedure
INFOID:0000000005528762

1.CHECK FUSE
Check for blown fuses.
Power source Battery Fuse No. 25

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between woofer amp. harness connector and ground.
Signal name Battery power supply Connector No. B28 Terminal No. 6 Ignition switch position OFF Value (Approx.) Battery voltage

Is the inspection result normal? YES >> GO TO 3. NO >> Check harness between woofer amp. and fuse.

3.CHECK GROUND CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect woofer amp. connector. Check continuity between woofer amp. harness connector and ground.
Signal name Ground Connector No. B28 Terminal No. 5 Ignition switch position OFF Continuity Existed

Is the inspection result normal? YES >> INSPECTION END NO >> Repair harness or connector.

iPod ADAPTER
AV-634

Revision: 2009 September

2010 Murano

POWER SUPPLY AND GROUND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528763

iPod ADAPTER : Diagnosis Procedure

1.CHECK FUSE
Check for blown fuses.
Power source Battery Ignition switch ACC or ON Fuse No. 35 19

Is the inspection result normal? YES >> GO TO 2. NO >> Be sure to eliminate the cause of malfunction before installing new fuse.

2.CHECK POWER SUPPLY CIRCUIT


Check voltage between iPod adapter harness connector and ground.
Signal name Battery power supply ACC power supply Connector No. M148 Terminal No. 5 3 Ignition switch position OFF ACC Value (Approx.)

F
Battery voltage

Is the inspection result normal? YES >> INSPECTION END NO >> Check harness between iPod adapter and fuse.

AV

Revision: 2009 September

AV-635

2010 Murano

RGB (R: RED) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

RGB (R: RED) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
Transmit the image displayed with AV control unit with RGB signal to the front display unit.
INFOID:0000000005528764

Diagnosis Procedure

INFOID:0000000005528765

1.CHECK CONTINUITY RGB (R: RED) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 17 AV control unit Connector M146 Terminal 61

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 17 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (R: RED) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

17

Ground

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1029ZZ

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-636

2010 Murano

RGB (G: GREEN) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A

RGB (G: GREEN) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
Transmit the image displayed with AV control unit with RGB signal to the front display unit.
INFOID:0000000005528766

Diagnosis Procedure

INFOID:0000000005528767

1.CHECK CONTINUITY RGB (G: GREEN) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 6 AV control unit Connector M146 Terminal 62

E
Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 6 Ground

G
Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (G: GREEN) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

Ground

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1030ZZ

AV

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-637

2010 Murano

RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

RGB (B: BLUE) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
Transmit the image displayed with AV control unit with RGB signal to the front display unit.
INFOID:0000000005528768

Diagnosis Procedure

INFOID:0000000005528769

1.CHECK CONTINUITY RGB (B: BLUE) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 18 AV control unit Connector M146 Terminal 63

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 18 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB (B: BLUE) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

18

Ground

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1031ZZ

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-638

2010 Murano

RGB SYNCHRONIZING SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528770

RGB SYNCHRONIZING SIGNAL CIRCUIT


Description
Transmit the RGB synchronizing signal to the front display unit so as to synchronize the RGB image displayed with AV control unit.

Diagnosis Procedure

INFOID:0000000005528771

1.CHECK CONTINUITY RGB SYNCHRONIZING SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 19 AV control unit Connector M146 Terminal 65

E
Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 19 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB SYNCHRONIZING SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

19

Ground

AV
JPNIA0461GB

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-639

2010 Murano

RGB AREA (YS) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

RGB AREA (YS) SIGNAL CIRCUIT (AV CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
INFOID:0000000005528772

Transmits the display area of RGB image displayed by AV control unit with RGB area (YS) signal to front display unit.

Diagnosis Procedure

INFOID:0000000005528773

1.CHECK CONTINUITY RGB AREA (YS) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 9 AV control unit Connector M146 Terminal 67

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 9 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK RGB AREA (YS) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal When RGB image is displayed. Approx. 5.0 V () Condition Signal

M49

Ground

When AUX image is displayed.

PKIB4948J

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace AV control unit.

Revision: 2009 September

AV-640

2010 Murano

HP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A

HP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


Description
INFOID:0000000005528774

In composite image (AUX image, camera image), transmit the vertical synchronizing (VP) signal and horizontal synchronizing (HP) signal from front display unit to AV control unit so as to synchronize the RGB images displayed with AV control unit such as the image quality adjusting menu, etc.

Diagnosis Procedure

INFOID:0000000005528775

1.CHECK CONTINUITY HORIZONTAL SYNCHRONIZING (HP) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 8 AV control unit Connector M146 Terminal 68

E
Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
G
Front display unit Connector M49 Terminal 8 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK HORIZONTAL SYNCHRONIZING (HP) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M
M49 8 Ground

AV
SKIB3603E

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace front display unit.

Revision: 2009 September

AV-641

2010 Murano

VP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

VP SIGNAL CIRCUIT (FRONT DISPLAY UNIT TO AV CONTROL UNIT)


Description
INFOID:0000000005528776

In composite image (AUX image, camera image), transmit the vertical synchronizing (VP) signal and horizontal synchronizing (HP) signal from front display unit to AV control unit so as to synchronize the RGB images displayed with AV control unit such as the image quality adjusting menu, etc.

Diagnosis Procedure

INFOID:0000000005528777

1.CHECK CONTINUITY VERTICAL SYNCHRONIZING (VP) SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect front display unit connector and AV control unit connector. Check continuity between front display unit harness connector and AV control unit harness connector.
Front display unit Connector M49 Terminal 20 AV control unit Connector M146 Terminal 69

Continuity Existed

4.

Check continuity between front display unit harness connector and ground.
Front display unit Connector M49 Terminal 20 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VERTICAL SYNCHRONIZING (VP) SIGNAL


1. 2. 3. Connect front display unit connector and AV control unit connector. Turn ignition switch ON. Check signal between front display unit harness connector and ground using an oscilloscope.
(+) Front display unit Connector Terminal () Condition Signal

M49

20

Ground

SKIB3598E

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace front display unit.

Revision: 2009 September

AV-642

2010 Murano

AUX IMAGE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528778

AUX IMAGE SIGNAL CIRCUIT


Description
Transmits the image signal of external device from auxiliary input jacks to front display unit.

B
INFOID:0000000005528779

Diagnosis Procedure

1.CHECK CONTINUITY AUX IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect auxiliary input jacks connector and front display unit connector. Check continuity between auxiliary input jacks harness connector and front display unit harness connector.
Auxiliary input jacks Connector M253 Terminals 7 8 Front display unit Connector M49 Terminals 15 5

E
Continuity

Existed

4.

Check continuity between front display unit harness connector and ground.
G
Front display unit Connector M49 Terminal 15 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AUX IMAGE SIGNAL


1. 2. 3. Connect auxiliary input jacks connector and front display unit connector. Turn ignition switch ON. Check signal between AV control unit harness connector using an oscilloscope.
(+) Front display unit Connector Terminal () Front display unit Connector Terminal Condition Signal

M
M49 15 M49 5 When AUX image is displayed.

AV
SKIB2251J

Is the inspection result normal? YES >> Replace front display unit. NO >> Check that there is no malfunction in the external device.

Revision: 2009 September

AV-643

2010 Murano

DISK EJECT SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

DISK EJECT SIGNAL CIRCUIT


Description Diagnosis Procedure
INFOID:0000000005528780

The disk eject signal is output to AV control unit when the disk eject switch of preset switch is pressed.
INFOID:0000000005528781

1.CHECK CONTINUITY CD EJECT SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect multifunction switch connector and AV control unit connector. Check continuity between multifunction switch harness connector and AV control unit harness connector.
Multifunction switch Connector M125 Terminal 14 AV control unit Connector M147 Terminal 85

Continuity Existed

4.

Check continuity between multifunction switch harness connector and ground.


Multifunction switch Connector M125 Terminal 14 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector. Turn ignition switch ON. Check voltage between AV control unit harness connector terminal 85 and ground.
(+) AV control unit Connector M147 Terminal 85 Ground 5.0 V () Voltage (Approx.)

Is the inspection result normal? YES >> Replace preset switch. NO >> Replace AV control unit.

Revision: 2009 September

AV-644

2010 Murano

MICROPHONE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528782

MICROPHONE SIGNAL CIRCUIT


Description
Supply power from AV control unit to microphone. The microphone transmits the sound/voice to the AV control unit.

Diagnosis Procedure

INFOID:0000000005528783

1.CHECK CONTINUITY BETWEEN AV CONTROL UNIT AND MICROPHONE CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect AV control unit connector and microphone connector. Check continuity between AV control unit harness connector and microphone harness connector.
AV control unit Connector Terminals 26 M145 27 28 R20 Microphone Connector Terminals 4 2 1 Existed

E
Continuity

4.

Check continuity between AV control unit harness connector and ground.


AV control unit Connector M145 Terminals 26 28 Ground Not existed

Continuity

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VOLTAGE MICROPHONE VCC


1. 2. 3. Connect AV control unit connector. Turn ignition switch ON. Check voltage between AV control unit harness connector.
(+) AV control unit Connector M145 Terminal 26 () AV control unit Connector M145 Terminal 27 5.0 V Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 3. NO >> Replace AV control unit.

AV

3.CHECK MICROPHONE SIGNAL


1. 2. Connect microphone connector. Check signal between AV control unit harness connector using an oscilloscope.

Revision: 2009 September

AV-645

2010 Murano

MICROPHONE SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS >
(+) AV control unit Connector Terminal () AV control unit Connector Terminal Condition Signal

[BOSE AUDIO WITH NAVIGATION]

M145

28

M145

27

Give a voice

PKIB5037J

Is the inspection result normal? YES >> Replace AV control unit. NO >> Replace microphone.

Revision: 2009 September

AV-646

2010 Murano

CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A

CAMERA IMAGE SIGNAL CIRCUIT (REAR VIEW CAMERA TO CAMERA CONTROL UNIT)
Description
INFOID:0000000005528784

Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image signal from rear view camera when the reverse signal is input. The camera control unit that inputs the camera image signal transmits the camera image signal to the front display unit.

Diagnosis Procedure

INFOID:0000000005528785

1.CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and rear view camera connector. Check continuity between camera control unit harness connector and rear view camera harness connector.
Camera control unit Connector B60 Terminal 6 Rear view camera Connector D192 Terminal 3

F
Continuity Existed

4.

Check continuity between camera control unit harness connector and ground.
H
Camera control unit Connector B60 Terminal 6 Ground Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK CAMERA IMAGE SIGNAL


1. 2. 3. Connect camera control unit connector and rear view camera connector. Turn ignition switch ON. Check signal between camera control unit harness connector and ground using an oscilloscope.
(+) Camera control unit Connector Terminal () Condition Signal

AV
B60 6 Ground Shift the selector lever to R position.

O
SKIB2251J

Is the inspection result normal? YES >> Replace camera control unit. NO >> Replace rear view camera.

Revision: 2009 September

AV-647

2010 Murano

CAMERA ON SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

CAMERA ON SIGNAL CIRCUIT


Description
INFOID:0000000005528786

Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image signal from rear view camera when the reverse signal is input. The camera control unit that inputs the camera image signal transmits the camera image signal to the front display unit.

Diagnosis Procedure

INFOID:0000000005528787

1.CHECK CONTINUITY CAMERA ON SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and rear view camera connector. Check continuity between camera control unit harness connector and rear view camera harness connector.
Camera control unit Connector B60 Terminal 8 Rear view camera Connector D192 Terminal 1

Continuity Existed

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector B60 Terminal 8 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VOLTAGE CAMERA ON SIGNAL


1. 2. 3. Connect camera control unit connector and rear view camera connector. Turn ignition switch ON. Check signal between camera control unit harness connector and ground.
(+) Camera control unit Connector B60 Terminal 8 Ground Shift the selector lever to R position. 6.0 V () Condition Voltage (Approx.)

Is the inspection result normal? YES >> Replace rear view camera. NO >> Replace camera control unit.

Revision: 2009 September

AV-648

2010 Murano

CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO FRONT DISPLAY UNIT)
< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A

CAMERA IMAGE SIGNAL CIRCUIT (CAMERA CONTROL UNIT TO FRONT DISPLAY UNIT)
Description
INFOID:0000000005528788

Camera control unit outputs camera ON signal to rear view camera and inputs rear view camera image signal from rear view camera when the reverse signal is input. The camera control unit that inputs the camera image signal transmits the camera image signal to the front display unit.

Diagnosis Procedure

INFOID:0000000005528789

1.CHECK CONTINUITY CAMERA IMAGE SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and front display unit connector. Check continuity between camera control unit harness connector and front display unit harness connector.
Camera control unit Connector B60 Terminals 12 11 Front display unit Connector M49 Terminals 12 14

F
Continuity

G
Existed

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector B60 Terminal 12 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK CAMERA IMAGE SIGNAL


1. 2. 3. Connect camera control unit connector and front display unit connector. Turn ignition switch ON. Check signal between camera control unit harness connector and ground using an oscilloscope.
(+) Camera control unit Connector Terminal () Condition Signal

AV
Shift the selector lever to R position.

B60

12

Ground

SKIB2251J

Is the inspection result normal? YES >> Replace front display unit. NO >> Replace camera control unit.

Revision: 2009 September

AV-649

2010 Murano

STEERING ANGLE SENSOR SIGNAL CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

STEERING ANGLE SENSOR SIGNAL CIRCUIT


Description
INFOID:0000000005528790

Steering angle sensor signal 1, 2 detects the turning direction and quantity of the steering and transmits it to the camera control unit. Steering angle sensor signal 3 detects the neutral position of the steering and transmits it to the camera control unit. Camera control unit performs the correction of neutral position with sensor signal 1, 2, 3 and vehicle speed signal.

Diagnosis Procedure

INFOID:0000000005528791

1.CHECK CONTINUITY STEERING ANGLE SENSOR SIGNAL CIRCUIT


1. 2. 3. Turn ignition switch OFF. Disconnect camera control unit connector and steering angle sensor connector. Check continuity between camera control unit harness connector and steering angle sensor harness connector.
Camera control unit Connector Terminals 23 B60 24 25 M30 Steering angle sensor Connector Terminals 3 6 8 Existed

Continuity

4.

Check continuity between camera control unit harness connector and ground.
Camera control unit Connector Terminals 23 B60 24 25 Ground Not existed

Continuity

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK VOLTAGE CAMERA CONTROL UNIT


1. 2. 3. Connect camera control unit connector. Turn ignition switch ON. Check voltage between camera control unit harness connector and ground.
(+) Camera control unit Connector Terminals 23 B60 24 25 Ground 5.0 V () Reference value (Approx.)

Is the inspection result normal? YES >> GO TO 3. NO >> Replace camera control unit.

3.CHECK STEERING ANGLE SENSOR SIGNAL


1. 2. Turn ignition switch OFF. Connect steering angle sensor connector.
Revision: 2009 September

AV-650

2010 Murano

STEERING ANGLE SENSOR SIGNAL CIRCUIT


[BOSE AUDIO WITH NAVIGATION] < DTC/CIRCUIT DIAGNOSIS > 3. Turn ignition switch ON. 4. Check signal between camera control unit harness connector and ground.
(+) Camera control unit Connector Terminals () Condition Reference value

Turn the steering to the right

SKIB3827E

23, 24

Ground

A: Sensor signal 1 B: Sensor signal 2

B60

Turn the steering to the left

G
SKIB3828E

A: Sensor signal 1 B: Sensor signal 2

I
Turn the steering around the neutral position
SKIB3829E

25

Ground

A: Sensor signal 3 B: Sensor signal 1

Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering angle sensor.

AV

Revision: 2009 September

AV-651

2010 Murano

STEERING SWITCH SIGNAL A CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

STEERING SWITCH SIGNAL A CIRCUIT


Description
Transmits the steering switch signal to AV control unit.
INFOID:0000000005528792

Diagnosis Procedure

INFOID:0000000005528793

1.CHECK STEERING SWITCH SIGNAL A CIRCUIT


1. 2. Disconnect AV control unit connector and spiral cable connector. Check continuity between AV control unit harness connector and spiral cable harness connector.
AV control unit Connector M144 Terminal 6 Spiral cable Connector M33 Terminal 24

Continuity Existed

3.

Check continuity between AV control unit harness connector and ground.


AV control unit Connector M144 Terminal 6 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector and spiral cable connector. Turn ignition switch ON. Check voltage between AV control unit harness connector.
(+) AV control unit Connector M144 Terminal 6 () AV control unit Connector M144 Terminal 15 5.0 V Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-653, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-652

2010 Murano

STEERING SWITCH SIGNAL A CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528794

Component Inspection
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.

D
JSNIA0112GB

Standard

Steering switch Connector Terminal Connector Terminal Condition ENTER switch ON switch ON 14 M303 M303 17 MENU DOWN switch ON MENU UP switch ON SOURCE switch ON switch ON 15 switch ON VOL UP switch ON VOL DOWN switch ON

E
Resistance 1983 2063 709 737 315 327 119 123 0 709 737 315 327 119 123 0

AV

Revision: 2009 September

AV-653

2010 Murano

STEERING SWITCH SIGNAL B CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

STEERING SWITCH SIGNAL B CIRCUIT


Description
Transmits the steering switch signal to AV control unit.
INFOID:0000000005528795

Diagnosis Procedure

INFOID:0000000005528796

1.CHECK STEERING SWITCH SIGNAL B CIRCUIT


1. 2. Disconnect AV control unit connector and spiral cable connector. Check continuity between AV control unit harness connector and spiral cable harness connector.
AV control unit Connector M144 Terminal 16 Spiral cable Connector M33 Terminal 31

Continuity Existed

3.

Check continuity between AV control unit harness connector and ground.


AV control unit Connector M144 Terminal 16 Ground

Continuity Not existed

Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK AV CONTROL UNIT VOLTAGE


1. 2. 3. Connect AV control unit connector and spiral cable connector. Turn ignition switch ON. Check voltage between AV control unit harness connector.
(+) AV control unit Connector M144 Terminal 16 () AV control unit Connector M144 Terminal 15 5.0 V Voltage (Approx.)

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer to AV-655, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-654

2010 Murano

STEERING SWITCH SIGNAL B CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528797

Component Inspection
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.

D
JSNIA0112GB

Standard

Steering switch Connector Terminal Connector Terminal Condition ENTER switch ON switch ON 14 M303 M303 17 MENU DOWN switch ON MENU UP switch ON SOURCE switch ON switch ON 15 switch ON VOL UP switch ON VOL DOWN switch ON

E
Resistance 1983 2063 709 737 315 327 119 123 0 709 737 315 327 119 123 0

AV

Revision: 2009 September

AV-655

2010 Murano

STEERING SWITCH SIGNAL GND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

STEERING SWITCH SIGNAL GND CIRCUIT


Description
Transmits the steering switch signal to AV control unit.
INFOID:0000000005528798

Diagnosis Procedure

INFOID:0000000005528799

1.CHECK STEERING SWITCH SIGNAL GND CIRCUIT


1. 2. Disconnect AV control unit connector and spiral cable connector. Check continuity between AV control unit harness connector and spiral cable harness connector.
AV control unit Connector M144 Terminal 15 Spiral cable Connector M33 Terminal 33

Continuity Existed

3. Connect AV control unit connector. Is the inspection result normal? YES >> GO TO 2. NO >> Repair harness or connector.

2.CHECK SPIRAL CABLE


Check spiral cable. Is the inspection result normal? YES >> GO TO 3. NO >> Replace spiral cable.

3.CHECK GROUND CIRCUIT


1. 2. Connect AV control unit connector. Check continuity between AV control unit harness connector and ground.
AV control unit Connector M144 Terminal 15 Ground

Continuity Existed

Is the inspection result normal? YES >> GO TO 4. NO >> Replace AV control unit.

4.CHECK STEERING SWITCH


1. Turn ignition switch OFF. 2. Check steering switch. Refer toAV-657, "Component Inspection". Is the inspection result normal? YES >> INSPECTION END NO >> Replace steering switch.

Revision: 2009 September

AV-656

2010 Murano

STEERING SWITCH SIGNAL GND CIRCUIT


< DTC/CIRCUIT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528800

Component Inspection
Measure the resistance between the steering switch connector terminals 14 to 17 and 15 to 17.

D
JSNIA0112GB

Standard

Steering switch Connector Terminal Connector Terminal Condition ENTER switch ON switch ON 14 M303 M303 17 MENU DOWN switch ON MENU UP switch ON SOURCE switch ON switch ON 15 switch ON VOL UP switch ON VOL DOWN switch ON

E
Resistance 1983 2063 709 737 315 327 119 123 0 709 737 315 327 119 123 0

AV

Revision: 2009 September

AV-657

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

ECU DIAGNOSIS INFORMATION


AV CONTROL UNIT
Reference Values
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
INFOID:0000000005528801

Monitor Item VHCL SPD SIG Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ON Ignition switch ACC Ignition switch ON

Condition Vehicle speed > 0 km/h (0 MPH) Vehicle speed = 0 km/h (0 MPH) Parking brake is applied. Parking brake is released. Light switch ON Light switch OFF Selector lever in R position Selector lever in any position other than R

Value/Status On Off On Off On Off On Off On Off

PKB SIG

ILLUM SIG

IGN SIG

REV SIG

TERMINAL LAYOUT

JPNIA0004ZZ

PHYSICAL VALUES
Terminal (Wire color) + 1 (P) Description Signal name Input/ Output Output Ignition switch ON Condition

Reference value (Approx.)

Ground

Amp. ON signal

12.0 V

2 (G)

3 (R)

Sound signal front LH

Output

Ignition switch ON

Sound output.

SKIB3609E

Revision: 2009 September

AV-658

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

B
4 (O)*1 (L)*2 5 (SB)*1 (R)*2 Sound signal rear LH Output Ignition switch ON

Sound output.

SKIB3609E

Keep pressing SOURCE switch. Keep pressing MENU UP switch. 6 (BR) 15 (L) Steering switch signal A Input Ignition switch ON Keep pressing MENU DOWN switch. Keep pressing switch.

0V

E
1.0 V 2.0 V 3.0 V 4.0 V 5.0 V Battery voltage 0V 12.0 V

Keep pressing ENTER switch. Except for above. 7 (R) 9 (R) 10 Ground ACC power supply Input Ignition switch ACC OFF Lighting switch is OFF. Lighting switch is ON.

Ground

Illumination signal Shield

Input

J
Ignition switch ON

11 (B)

12 (W)

Sound signal front RH

Output

Sound output.

SKIB3609E

13 (V)

14 (LG)

Sound signal rear RH

Output

Ignition switch ON

M
Sound output.

AV
SKIB3609E

15 (L)

Ground

Steering switch signal GND

Ignition switch ON

Keep pressing VOL DOWN switch.

0V

0V 1.0 V 2.0 V 3.0 V 5.0 V

16 (G)

15 (L)

Steering switch signal B

Input

Ignition switch ON

Keep pressing VOL UP switch. Keep pressing Keep pressing Except for above. switch. switch.

Revision: 2009 September

AV-659

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 19 (Y) 21 (B) 22 (Y) 23 (B) 24 (Y) 25 (R) 26 (B) Description Signal name Input/ Output Input Ignition switch OFF Ignition switch ON Ignition switch OFF Ignition switch ON Ignition switch OFF Ignition switch ACC Ignition switch ON Ignition switch ON Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

Ground

Battery power supply

Battery voltage

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Ground

ACC power supply

Input

Battery voltage

27

Microphone VCC

Output

5.0 V

27

Ground

Shield (Microphone ground)

0V

28 (W)

27

Microphone signal

Input

Ignition switch ON

Make a sound with your voice

PKIB5037J

35 (G) 36 (G) 37 (SB)

Ground

Ignition signal

Input

Ignition switch ON Ignition switch ON Ignition switch ON

Parking brake ON. Parking brake OFF. R position. Other than R position.

Battery voltage 0V 5.0 V 12.0 V 0V NOTE: Maximum voltage may be 12 V due to specifications (connected units).

Ground

Parking brake signal

Input

Ground

Reverse signal

Input

38 (V)

Ground

Vehicle speed signal (8pulse)

Input

Ignition switch ON

When vehicle speed is approx. 40 km/h (25MPH).

SKIA6649J

Revision: 2009 September

AV-660

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Ignition switch ON Ignition switch ON Ignition switch ON Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

40 (P)

Ground

Camera-connection recognition signal

Input

Connected to camera control unit connector. Not connected to camera control unit connector.

0V 5.0 V

42 (B) 43 (B) 48 (G) 49 (L) 50 (R) 51 (L) 52 (L) 53 (P)

Ground

Control signal 2

Input

0V

D
0V

Ground

Control signal 3 AV communication signal (H) AV communication signal (L) AV communication signal (H) AV communication signal (L) CANH CANL

Input Input/ Output Input/ Output Input/ Output Input/ Output Input/ Output Input/ Output

I
Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1029ZZ

61 (G)

Ground

RGB image signal (R: red)

Output

Ignition switch ON

62 (R)

Ground

RGB image signal (G: green)

Output

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1030ZZ

AV
63 (W) Ignition switch ON Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1031ZZ

Ground

RGB image signal (B: blue)

Output

64

Shield

Revision: 2009 September

AV-661

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

65 (B)

Ground

RGB synchronizing signal

Output

Ignition switch ON

JPNIA0461GB

66

Shield

When RGB image is displayed.

5.0 V

67 (W)

Ground

RGB area (YS) signal

Output

Ignition switch ON

When rear view camera image is displayed.

PKIB4948J

68 (B)

Ground

Horizontal synchronizing (HP) signal

Input

Ignition switch ON

SKIB3601E

69 (R)

Ground

Vertical synchronizing (VP) signal

Input

Ignition switch ON

SKIB3598E

70 (R)

Ground

Communication signal (CONTDISP)

Output

Ignition switch ON

When adjusting display brightness.

PKIB5039J

71 (G)

Ground

Communication signal (DISPCONT)

Input

Ignition switch ON

When adjusting display brightness.

PKIB5039J

72

Shield

Revision: 2009 September

AV-662

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

79 (BR)

95 (L)

iPod sound signal LH

Input

When iPod mode is selected.

SKIB3609E

80 (R)

96 (W)

iPod sound signal RH

Input

Ignition switch ON

E
When iPod mode is selected.

F
SKIB3609E

81 85 (W) 86

Ground

Shield Eject signal Shield

Input

Pressing the eject switch. Except for above.

0V 5.0 V

87 (B)

88 (W)

AUX sound signal LH

Input

Ignition switch ON

I
When AUX mode is selected.

J
SKIB3609E

102 (V)

Ground

SW ground

Ignition switch ON

0V

L
103 (R) 88 (W) AUX sound signal RH Input Ignition switch ON When AUX mode is selected.

M
SKIB3609E

105 106 107

Ground

FM sub AMFM main Antenna amp. ON signal

Input Input Output

Ignition switch ON Ignition switch ON Ignition switch ON

12.0 V

AV

108 109 110 111

Ground Ground

Satellite antenna signal Shield GPS antenna signal Shield

Input Input

Not connected to satellite antenna connector. Not connected to GPS antenna connector.

5.0 V 5.0 V

Revision: 2009 September

AV-663

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
*1: Type A *2: Type B

[BOSE AUDIO WITH NAVIGATION]

Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM -

INFOID:0000000005528802

NOTE: In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1838GB

Revision: 2009 September

AV-664

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1839GB

Revision: 2009 September

AV-665

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1840GB

Revision: 2009 September

AV-666

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1841GB

Revision: 2009 September

AV-667

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1842GB

Revision: 2009 September

AV-668

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3163GB

Revision: 2009 September

AV-669

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3164GB

Revision: 2009 September

AV-670

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3165GB

Revision: 2009 September

AV-671

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3166GB

Revision: 2009 September

AV-672

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3167GB

Revision: 2009 September

AV-673

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3168GB

Revision: 2009 September

AV-674

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3169GB

Revision: 2009 September

AV-675

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3170GB

Revision: 2009 September

AV-676

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3171GB

Revision: 2009 September

AV-677

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3172GB

Revision: 2009 September

AV-678

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3173GB

Revision: 2009 September

AV-679

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3174GB

Revision: 2009 September

AV-680

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3175GB

Revision: 2009 September

AV-681

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3176GB

Fail-Safe

INFOID:0000000005528803

When the ambiance temperature becomes extremely low or extremely high, or when HDD is malfunctioning, AV control unit displays the message and limits the AV control unit function.

FAIL-SAFE CONDITIONS
When the ambiance temperature is 20C (4F) or lower, or when it is 70C (158F) or higher when HDD is malfunctioning
Revision: 2009 September

AV-682

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
Display The messages displayed on fail-safe conditions are as shown below:

[BOSE AUDIO WITH NAVIGATION]


A

JPNIA0414GB

Fail-safe mode When HDD temperature is low When HDD temperature is high When HDD is malfunctioning

Display (display of the fail-safe condition) HDD system is experiencing problems due to extreme low temperature. Normal operation will resume when temperature rises. HDD system is experiencing problems due to extreme high temperature. Normal operation will resume when temperature drops. HDD system is not functioning. Please contact your dealer for assistance.

DESCRIPTION OF CONTROLS
Function Operation Air conditioner Display Operation Display Operation Display Operation Operation When Fail-safe Function is activated Only multifunction switch (preset switch) can be operated. LED of multifunction switch (preset switch) illuminates. Aimed temperature, blow angle, and flow rate are displayed in simplified mode. Only ON/OFF and volume control operations by multifunction switch (preset switch) are possible. No display (Fail-safe mode is displayed.) Image tone cannot be controlled. Cannot be superimposed. (warning display, tone control display) Cannot be operated. Cannot be operated. The display in simplified mode of fail-safe condition Cannot be operated.

Audio

Camera Hands-free phone Navigation

Self diagnosis CONSULT-III diagnosis

Ability Operation Mode There is an ability operation mode for Fail-safes due to low or high ambiance temperature. If HDD data can be read, fail-safe is shown, then normal displays are displayed only for functions which can be operated.

RELEASE CONDITIONS OF FAIL-SAFE


Fail-safe is released on the following conditions and normal mode is restored.
When the temperature of HDD is low or high. If the ambient temperature becomes out of the fail-safe conditional range, normal mode is restored. When HDD is malfunctioning. If the malfunction disappears, normal mode is restored. NOTE: If fail-safe mode due to HDD malfunction is seen continuously, replace AV control unit. If fail-safe mode due to HDD malfunction is seen temporarily, check the Error History of Confirmation/ Adjustment mode. If this is normal, then continue the normal operation, observing the function. (It might be a temporary malfunction of HDD.)

AV

Revision: 2009 September

AV-683

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528804

DTC Index
SELF-DIAGNOSIS RESULTS DISPLAY ITEM
DTC U1000 U1010 U1310 U1200 U1201 U1216 U1217 U1218 U1219 U1220 U121A U121B U121C U121D U121E U121F U1204 U1205 U1206 U1207 U1243 U1244 U1250 U1258 U1300 U121F U1300 U1240 U1300 U1252 U1300 U1254 U1300 U1252 U1254* U1300 U1240 U1252 U1254* U1300 U121F U1240 U1252 U1254* NOTE: Display item CAN COMM CIRCUIT [U1000] CONTROL UNIT (CAN) [1010] CONTROL UNIT (AV) [U1310] Control Unit FLASH-ROM [1200] Gyro NO CONN [1201] CAN CONT [U1216] BLUETOOTH CONN [U1217] HDD CONN [U1218] HDD READ [U1219] XM SERIAL COMM [U1220] HDD WRITE [U121A] HDD COMM [U121B] HDD ACCESS [U121C] DSP CONN [U121D] DSP COMM [U121E] INTERNAL COMM [U121F] GPS COMM [U1204] GPS ROM [U1205] GPS RAM [U1206] GPS RTC [U1207] FRONT DISP CONN [U1243] GPS ANTENNA CONN [U1244] CAMERA CONT. CONN [U1250] XM ANTENNA CONN [U1258] AV COMM CIRCUIT [U1300] INTERNAL COMM [U121F] AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] AV COMM CIRCUIT [U1300] IPOD CONN [U1254] AV COMM CIRCUIT [U1300] REAR CAMERA LAN CONN [U1252] IPOD CONN [U1254]* AV COMM CIRCUIT [U1300] SWITCH CONN [U1240] REAR CAMERA LAN CONN [U1252] IPOD CONN [U1254]* AV COMM CIRCUIT [U1300] INTERNAL COMM [U121F] SWITCH CONN [U1240] REAR CAMERA LAN CONN [U1252] Refer to

AV-605, "Diagnosis Procedure" AV-606, "Diagnosis Procedure" AV-607, "DTC Logic" AV-608, "DTC Logic" AV-609, "DTC Logic" AV-610, "DTC Logic" AV-611, "DTC Logic" AV-612, "DTC Logic" AV-613, "DTC Logic" AV-614, "DTC Logic" AV-615, "DTC Logic" AV-616, "DTC Logic" AV-617, "DTC Logic" AV-618, "DTC Logic" AV-619, "DTC Logic" AV-620, "DTC Logic" AV-621, "DTC Logic" AV-622, "DTC Logic" AV-623, "DTC Logic" AV-624, "DTC Logic" AV-625, "DTC Logic" AV-627, "DTC Logic" AV-628, "DTC Logic" AV-629, "DTC Logic" AV-630, "Description" AV-630, "Description" AV-630, "Description" AV-630, "Description"

AV-630, "Description"

AV-630, "Description"

AV-630, "Description"

IPOD CONN [U1254]*

Revision: 2009 September

AV-684

2010 Murano

AV CONTROL UNIT
< ECU DIAGNOSIS INFORMATION >
*: Non-equipped item is not displayed.

[BOSE AUDIO WITH NAVIGATION]


A

AV

Revision: 2009 September

AV-685

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

FRONT DISPLAY UNIT


Reference Values
TERMINAL LAYOUT
INFOID:0000000005528805

JPNIA0006ZZ

PHYSICAL VALUES
Terminal (Wire color) + 1 (B) 2 (Y) 3 (R) 4 5 (B) Description Signal name Input/ Output Ignition switch ON Ignition switch OFF Ignition switch ACC Ignition switch ON Condition

Reference value (Approx.)

Ground

Ground

0V

Ground

Battery power supply

Input

Battery voltage

Ground Ground

ACC power supply Shield AUX image ground

Input

Battery voltage 0V

6 (R)

Ground

RGB image signal (G: green)

Input

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1030ZZ

Shield

8 (B)

Ground

Horizontal synchronizing (HP) signal

Output

Ignition switch ON

SKIB3601E

Revision: 2009 September

AV-686

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

When RGB image is displayed.

5.0 V

9 (W)

Ground

RGB area (YS) signal

Input

Ignition switch ON

C
When rear view camera image is displayed.

D
PKIB4948J

11 (R)

Ground

Communication signal (CONTDISP)

Input

Ignition switch ON

When adjusting display brightness.

PKIB5039J

H
12 (W) 14 Camera image signal Input Ignition switch ON When rear view camera image is displayed.

I
SKIB2251J

13 (B)

Ground

Ground

Ignition switch ON Ignition switch ON

0V

14

Ground

Shield (camera image ground

0V

L
15 (Y) 5 AUX image signal Input Ignition switch ON When AUX image is displayed.

M
SKIB2251J

AV
Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1029ZZ

17 (G)

Ground

RGB image signal (R: red)

Input

Ignition switch ON

Revision: 2009 September

AV-687

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

18 (W)

Ground

RGB image signal (B: blue)

Input

Ignition switch ON

Start confirmation/adjustment mode, and then display color bar by selecting Color Spectrum Bar on DISPLAY DIAGNOSIS screen.
JSNIA1031ZZ

19 (B)

Ground

RGB synchronizing signal

Input

Ignition switch ON

JPNIA0461GB

20 (R)

Ground

Vertical synchronizing (VP) signal

Output

Ignition switch ON

SKIB3598E

21

Shield

22 (G)

Ground

Communication signal (DISPCONT)

Output

Ignition switch ON

When adjusting display brightness.

PKIB5039J

23

Shield

INFOID:0000000005528806

Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM NOTE:

Revision: 2009 September

AV-688

2010 Murano

FRONT DISPLAY UNIT


[BOSE AUDIO WITH NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1838GB

Revision: 2009 September

AV-689

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1839GB

Revision: 2009 September

AV-690

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1840GB

Revision: 2009 September

AV-691

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1841GB

Revision: 2009 September

AV-692

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1842GB

Revision: 2009 September

AV-693

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3163GB

Revision: 2009 September

AV-694

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3164GB

Revision: 2009 September

AV-695

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3165GB

Revision: 2009 September

AV-696

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3166GB

Revision: 2009 September

AV-697

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3167GB

Revision: 2009 September

AV-698

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3168GB

Revision: 2009 September

AV-699

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3169GB

Revision: 2009 September

AV-700

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3170GB

Revision: 2009 September

AV-701

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3171GB

Revision: 2009 September

AV-702

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3172GB

Revision: 2009 September

AV-703

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3173GB

Revision: 2009 September

AV-704

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3174GB

Revision: 2009 September

AV-705

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3175GB

Revision: 2009 September

AV-706

2010 Murano

FRONT DISPLAY UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3176GB

Revision: 2009 September

AV-707

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

BOSE AMP.
Reference Values
TERMINAL LAYOUT
INFOID:0000000005528807

JSNIA1223ZZ

PHYSICAL VALUES
Terminal (Wire color) + Description Signal name Input/ Output Condition

Reference value (Approx.)

1 (LG)

2 (V)

Sound signal front squawker LH

Output

Ignition switch ON

Sound output.

SKIB3609E

4 (P)

3 (L)

Sound signal front squawker RH

Output

Ignition switch ON

Sound output.

SKIB3609E

5 (Y)

6 (BR)

Sound signal rear speaker RH

Output

Ignition switch ON

Sound output.

SKIB3609E

7 (B) 10 (SB) 11 (GR) 12 (B)

Ground

Ground

Ignition switch ON Ignition switch OFF Ignition switch OFF Ignition switch ON

0V

Ground

Battery power supply

Input

Battery voltage

Ground

Battery power supply

Input

Battery voltage

Ground

Ground

0V

Revision: 2009 September

AV-708

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

B
Ignition switch ON

13 (GR)

8 (BR)

Sound signal rear speaker LH

Output

Sound output.

SKIB3609E

14 (L)

9 (O)

Sound signal rear door speaker RH

Output

Ignition switch ON

E
Sound output.

F
SKIB3609E

G
16 (B/R) 17 (W/R) Sound signal woofer Output Ignition switch ON Sound output.

SKIB3609E

18 (W)

19 (B)

Sound signal front door speaker LH

Output

Ignition switch ON

J
Sound output.

K
SKIB3609E

20 (SB) 21 22 (W)

Ground Ground

Amp. ON signal Shield Woofer Amp. ON signal

Input Output

Ignition switch ACC Ignition switch ACC

12.0 V 12.0 V

AV
24 (GR/V) 23 (W/L) Ignition switch ON

Sound signal rear LH

Input

Sound output.

SKIB3609E

Revision: 2009 September

AV-709

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

26 (GR/V)

25 (W/L)

Sound signal rear RH

Input

Ignition switch ON

Sound output.

SKIB3609E

28 (G)

15 (R)

Sound signal rear door speaker LH

Output

Ignition switch ON

Sound output.

SKIB3609E

29 (V)

30 (P)

Sound signal center speaker

Output

Ignition switch ON

Sound output.

SKIB3609E

31 (BR)

32 (Y)

Sound signal front door speaker RH

Output

Ignition switch ON

Sound output.

SKIB3609E

33 (W/R)

34 (B/R)

Sound signal front RH

Input

Ignition switch ON

Sound output.

SKIB3609E

35 (W/R)

36 (B/R)

Sound signal front LH

Input

Ignition switch ON

Sound output.

SKIB3609E

Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM NOTE:

INFOID:0000000005528808

Revision: 2009 September

AV-710

2010 Murano

BOSE AMP.
[BOSE AUDIO WITH NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

AV

JCNWM1838GB

Revision: 2009 September

AV-711

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1839GB

Revision: 2009 September

AV-712

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1840GB

Revision: 2009 September

AV-713

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1841GB

Revision: 2009 September

AV-714

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1842GB

Revision: 2009 September

AV-715

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3163GB

Revision: 2009 September

AV-716

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3164GB

Revision: 2009 September

AV-717

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3165GB

Revision: 2009 September

AV-718

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3166GB

Revision: 2009 September

AV-719

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3167GB

Revision: 2009 September

AV-720

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3168GB

Revision: 2009 September

AV-721

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3169GB

Revision: 2009 September

AV-722

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3170GB

Revision: 2009 September

AV-723

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3171GB

Revision: 2009 September

AV-724

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3172GB

Revision: 2009 September

AV-725

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3173GB

Revision: 2009 September

AV-726

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3174GB

Revision: 2009 September

AV-727

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3175GB

Revision: 2009 September

AV-728

2010 Murano

BOSE AMP.
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3176GB

Revision: 2009 September

AV-729

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

IPOD ADAPTER
Reference Values
TERMINAL LAYOUT
INFOID:0000000005528809

JSNIA0618ZZ

PHYSICAL VALUES
Terminal (Wire color) + Description Signal name Input/ Output Condition

Reference value (Approx.)

1 (BR)

13 (L)

iPod sound signal LH

Output

Ignition switch ON

When iPod mode is selected.

SKIB3609E

2 (R)

14 (W)

iPod sound signal RH

Output

Ignition switch ON

When iPod mode is selected.

SKIB3609E

3 (R) 4 (L) 5 (Y) 8 (W)

Ground

ACC power supply AV communication signal (L) Battery power supply

Input Input/ Output Input

Ignition switch ACC Ignition switch OFF Ignition switch ON

Battery voltage

Ground

Battery voltage

Ground

iPod battery charge

Output

Connected to iPod.

12.0 V

Revision: 2009 September

AV-730

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

9 (G)

Ground

Communication signal (iPod adapteriPod)

Output

Ignition switch ON

The wave pattern is displayed just after iPod connection.


JPNIA0462GB

NOTE: After the wave pattern display, the value continues Approx 3.3 V

10 (R)

Ground

Communication signal (iPod iPod adapter)

Input

Ignition switch ON

Connected to iPod.

G
JPNIA0462GB

11 (R)

Ground

ACCESSORY-IDENTIFY

Ignition switch ON

Connected to iPod.

0V

I
12 (V) 23 (R) iPod sound signal RH Input Ignition switch ON When iPod mode is selected.

J
SKIB3609E

15 16 (R) 17 19 21 (L) 22 (BR)

Shield AV communication signal (H) Ground Shield iPod connection recognition signal

Input/ Output Input

Ignition switch ON Ignition switch ON Ignition switch ON

L
Not connected to iPod. 0V 4.0 V 0V 0V

Ground Ground

Connected to iPod. Connected to iPod.

AV

Ground

ACCESSORY-DETECT

24 (LG)

23 (R)

iPod sound signal LH

Input

Ignition switch ON

When iPod mode is selected.

SKIB3609E

Revision: 2009 September

AV-731

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528810

Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM -

NOTE: In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1838GB

Revision: 2009 September

AV-732

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1839GB

Revision: 2009 September

AV-733

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1840GB

Revision: 2009 September

AV-734

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1841GB

Revision: 2009 September

AV-735

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1842GB

Revision: 2009 September

AV-736

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3163GB

Revision: 2009 September

AV-737

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3164GB

Revision: 2009 September

AV-738

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3165GB

Revision: 2009 September

AV-739

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3166GB

Revision: 2009 September

AV-740

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3167GB

Revision: 2009 September

AV-741

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3168GB

Revision: 2009 September

AV-742

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3169GB

Revision: 2009 September

AV-743

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3170GB

Revision: 2009 September

AV-744

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3171GB

Revision: 2009 September

AV-745

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3172GB

Revision: 2009 September

AV-746

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3173GB

Revision: 2009 September

AV-747

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3174GB

Revision: 2009 September

AV-748

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3175GB

Revision: 2009 September

AV-749

2010 Murano

IPOD ADAPTER
< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3176GB

Revision: 2009 September

AV-750

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528811

CAMERA CONTROL UNIT


Reference Values
TERMINAL LAYOUT

JPNIA0007ZZ

PHYSICAL VALUES
F
Terminal (Wire color) + 5 Shield Description Signal name Input/ Output Condition Reference value (Approx.)

H
Ignition switch ON

6 (B)

Ground

Camera image signal

Input

when rear view camera image is displayed.

SKIB2251J

7 (R/W) 8 (R/L)

Ground

Rear view camera ground

Ignition switch ON Ignition switch ON Ignition switch ON R position.

0V

K
6.0 V 0V 0V

Ground

Camera ON signal

Output

Other than R position.

11

Ground

Shield (camera image ground

12 (B)

11

Camera image signal

Output

Ignition switch ON

when rear view camera image is displayed.

AV

O
SKIB2251J

14 (L) 17 (BR) 18 (Y)

Ground

Camera-connection recognition signal AV communication signal (L) AV communication signal (H)

Output

Ignition switch ON

Connected to camera control unit connector. Not connected to camera control unit connector.

0V

P
5.0 V

Input/ Output Input/ Output

Revision: 2009 September

AV-751

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + 19 (GR) 20 (G) 22 (R) Description Signal name AV communication signal (L) AV communication signal (H) Reverse signal Input/ Output Input/ Output Input/ Output Input Ignition switch ON R position. Other than R position. Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

12.0 V 0V

Ground

Turn the steering to the right.


SKIB3827E

23 (G)

Ground

Sensor signal 1

Input

Ignition switch ON

A: Sensor signal 1 B: Sensor signal 2

Turn the steering to the left.

SKIB3828E

A: Sensor signal 1 B: Sensor signal 2

Turn the steering to the right.


SKIB3827E

24 (SB)

Ground

Sensor signal 2

Input

Ignition switch ON

A: Sensor signal 1 B: Sensor signal 2

Turn the steering to the left.

SKIB3828E

A: Sensor signal 1 B: Sensor signal 2

Revision: 2009 September

AV-752

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION >
Terminal (Wire color) + Description Signal name Input/ Output Condition

[BOSE AUDIO WITH NAVIGATION]


Reference value (Approx.)

25 (O)

Ground

Sensor signal 3

Input

Ignition switch ON

Turn the steering around the neutral position.


SKIB3829E

A: Sensor signal 3 B: Sensor signal 1 NOTE: Maximum voltage may be 12 V due to specifications (connected units). 26 (BR) Ground Vehicle speed signal (8-pulse) Input Ignition switch ON When vehicle speed is approx. 40 km/h (25 MPH).

G
SKIA6649J

30 (GR) 31 (B) 32 (V)

Ground

ACC power supply

Input

Ignition switch ACC Ignition switch ON Ignition switch OFF

H
Battery voltage

I
0V

Ground

Ground

J
Battery voltage

Ground

Battery power supply

Input

Wiring Diagram - BOSE AUDIO WITH NAVIGATION SYSTEM NOTE:

INFOID:0000000005528812

AV

Revision: 2009 September

AV-753

2010 Murano

CAMERA CONTROL UNIT


[BOSE AUDIO WITH NAVIGATION] < ECU DIAGNOSIS INFORMATION > In this section, PRESET SWITCH and MULTIFUNCTION SWITCH are written as the MULTIFUNCTION SWITCH.

JCNWM1838GB

Revision: 2009 September

AV-754

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1839GB

Revision: 2009 September

AV-755

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1840GB

Revision: 2009 September

AV-756

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM1841GB

Revision: 2009 September

AV-757

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM1842GB

Revision: 2009 September

AV-758

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3163GB

Revision: 2009 September

AV-759

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3164GB

Revision: 2009 September

AV-760

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3165GB

Revision: 2009 September

AV-761

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3166GB

Revision: 2009 September

AV-762

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3167GB

Revision: 2009 September

AV-763

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3168GB

Revision: 2009 September

AV-764

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3169GB

Revision: 2009 September

AV-765

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3170GB

Revision: 2009 September

AV-766

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3171GB

Revision: 2009 September

AV-767

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3172GB

Revision: 2009 September

AV-768

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3173GB

Revision: 2009 September

AV-769

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3174GB

Revision: 2009 September

AV-770

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]
A

AV

O
JCNWM3175GB

Revision: 2009 September

AV-771

2010 Murano

CAMERA CONTROL UNIT


< ECU DIAGNOSIS INFORMATION > [BOSE AUDIO WITH NAVIGATION]

JCNWM3176GB

Revision: 2009 September

AV-772

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]
A

SYMPTOM DIAGNOSIS
MULTI AV SYSTEM SYMPTOMS
Symptom Table
RELATED TO NAVIGATION
Trouble diagnosis chart by symptom
Symptoms Check items All switches cannot be operated. MULTI AV is displayed on system selection screen when the CONSULT-III is started. Multifunction switch and preset switch operation does not work. All switches cannot be operated. MULTI AV is not displayed on system selection screen when the CONSULT-III is initialized. Only specified switch cannot be operated. There is malfunction in the CONSULTIII self-diagnosis result. Possible malfunction location / Action to take Multifunction switch power supply and ground circuit. AV communication circuit between AV control unit and multifunction switch. Perform CONSULT-III self-diagnosis. Refer to AV-601, "CONSULT-III Function (MULTI AV)". AV control unit power supply and ground circuit malfunction. Refer to AV-631, "AV CONTROL UNIT : Diagnosis Procedure". Multifunction switch or preset switch malfunction. Replace multifunction switch AV-546, "Exploded View" or preset switch AV-547, "Exploded View". Perform detected DTC self-diagnosis. Refer to AV-601, "CONSULT-III Function (MULTI AV)".
INFOID:0000000005528813

Fuel economy display, vehicle setting operation is abnormal.

Ignition signal circuit malfunction. There is no malfunction in the self-diagRefer to AV-631, "AV CONTROL UNIT : Diagnosis Pronosis results. cedure". On the setting display select system sound (guide sound volume, etc.), and confirm that guide sound is ON. AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View".

There is no guide sound

RELATED TO HANDS-FREE PHONE


Check that the cellular phone is a corresponding type (Bluetooth correspondence) when the hands-free related malfunction vehicle is in service before performing a diagnosis. There is a case that malfunction occurs due to the version change of the phone type, etc. even though it is a corresponding type. Therefore, confirm it by changing the cellular phone to another corresponding type phone, and check that it operates normally. It is necessary to distinguish whether the cause is the vehicle or cellular phone.
Simple check for Bluetooth communication K

If cellular phone and AV control unit cannot be connected with Bluetooth communication, the following procedure allows the technician to judge which device has a malfunction. 1. 2. 3. 4. Turn on the cellular phone, not connecting Bluetooth communication. Start CONSULT-III, then start Windows. Set CONSULT-III near the cellular phone.

AV

When operating Bluetooth registration by cellular phone, check if CONSULT-III* is displayed on the device name. (If another Bluetooth device is located near the cellular phone, the name of the device will also be displayed.) NOTE: *:Displayed device name is NISSAN. If no device name is displayed, cellular phone is malfunctioning. Repair the cellular phone first, then perform diagnosis. If CONSULT-III is displayed on device name, cellular phone is normal. Perform diagnosis as per the following table.

JPNIA0441GB

Revision: 2009 September

AV-773

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Trouble diagnosis chart by symptom
Symptoms Does not recognize cellular phone connection. (no connection is displayed on the display at the guide.) Check items Probable malfunction location AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View".

[BOSE AUDIO WITH NAVIGATION]

Repeat the registration of cellular phone.

Hands-free phone cannot be established.

Hands-free phone operation can be made, but the communication cannot be established. Hands-free phone operation can be performed, however, voice between each other cannot be heard during the conversation. Check the microphone speaker in Inspection & Adjustment Mode if sound is heard. Check the microphone speaker in Inspection & Adjustment Mode if sound is not heard. Sound operation function is normal.

AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View".

The other party's voice cannot be heard by hands-free phone.

AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View". AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View". AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View". Microphone signal circuit malfunction. Refer to AV-645, "Diagnosis Procedure".

Sound is not heard by the other party with hands-free phone communication.

Sound operation function does not work.

RELATED TO CAMERA
Trouble diagnosis chart by symptom
Symptoms Check items Probable malfunction location Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and display unit. Refer to AV-641, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and display unit. Refer to AV-642, "Diagnosis Procedure". Camera image signal circuit between camera control unit and rear view camera. Refer to AV-647, "Diagnosis Procedure". Rear view camera ON signal circuit. Refer to AV-648, "Diagnosis Procedure". Perform detected DTC self-diagnosis. Refer to AV-601, "CONSULT-III Function (MULTI AV)". Camera image signal circuit malfunction between camera control unit and front display unit. Refer to AV-649, "Diagnosis Procedure". RGB area (YS) signal circuit malfunction between AV control unit and front display unit. Refer to AV-640, "Diagnosis Procedure". Reverse signal circuit malfunction (camera control unit). Horizontal synchronizing (HP) signal circuit malfunction between AV control unit and display unit. Refer to AV-641, "Diagnosis Procedure". Vertical synchronizing (VP) signal circuit malfunction between AV control unit and display unit. Refer to AV-642, "Diagnosis Procedure".

Camera image is not displayed (displayed in black and nothing can be displayed)

AUX image is not displayed.

Camera image is not shown. (Vehicle width and possible route line is displayed.)

There is malfunction in the CONSULT-III self-diagnosis result. AUX image is normal. Camera image is not displayed. (Only warning message under area is displayed.)

AUX image is not displayed. Select Camera Cont. of confirmation/Adjustment mode, Reverse Sensor is not turned ON at Connection Confirmation.

CAMERA image is rolling.

AUX image is also rolling.

Revision: 2009 September

AV-774

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms Check items Malfunction of self-diagnosis result is indicated. Malfunction of self-diagnosis result is not indicated. Possible route line is indicated abnormally when camera image is displayed.

[BOSE AUDIO WITH NAVIGATION]


Probable malfunction location Camera-connection recognition signal circuit malfunction between AV control unit and camera control unit. Refer to AV-628, "Diagnosis Procedure". Reverse signal circuit malfunction (AV control unit). Steering angle sensor signal circuit malfunction. Refer to AV-650, "Diagnosis Procedure".

Camera image does not switch.

RELATED TO RGB IMAGE


Trouble diagnosis chart by symptom
Symptoms Check items All RGB images are not shown. MULTI AV is displayed on system selection screen when the CONSULT-III is started. All RGB images are not shown. MULTI AV is not displayed on system selection screen when the CONSULTIII is started. Light blue (Cyan) tint. Possible malfunction location / Action to take Perform CONSULT-III self-diagnosis. Refer to AV-601, "CONSULT-III Function (MULTI AV)". AV control unit power supply and ground circuit malfunction. Refer to AV-631, "AV CONTROL UNIT : Diagnosis Procedure". RGB signal (R: red) circuit malfunction between AV control unit and display unit. Refer to AV-636, "Diagnosis Procedure". RGB signal (G: green) circuit malfunction between AV control unit and display unit. Refer to AV-637, "Diagnosis Procedure". RGB signal (B: blue) circuit malfunction between AV control unit and display unit. Refer toAV-638, "Diagnosis Procedure". RGB synchronizing signal circuit malfunction between AV control unit and front display unit. Refer to AV-639, "Diagnosis Procedure".

RGB image is not shown.

Color of RGB image is not proper.

Purple (Magenta) tint.

Screen looks yellowish.

RGB screen is rolling.

RELATED TO VOICE CONTROL


Trouble diagnosis chart by symptom
Symptoms Check items Voice sounds at Voice Microphone Test of Confirmation/Adjustment mode. Voice does not sound at Voice Microphone Test of Confirmation/Adjustment mode. Steering switch SOURCE, MENU UP, MENU DOWN, ENTER operates, but The voice cannot be controlled (Voice control screen is not displayed). does not operate. Probable malfunction location AV control unit malfunction. Replace AV control unit. Refer to AV-787, "Exploded View". Microphone circuit malfunction. Refer to AV-645, "Diagnosis Procedure". Steering switch malfunction. Replace steering switch. Refer to AV-798, "Removal and Installation". Steering switch signal A circuit malfunction. Refer to AV-652, "Diagnosis Procedure". Steering switch signal GND circuit malfunction. Refer to AV-656, "Diagnosis Procedure".

The voice cannot be controlled even if the voice control screen is displayed.

AV

Steering switch's SOURCE, MENU UP, MENU DOWN, does not operate. , ENTER

All steering switches do not work.

RELATED TO AUDIO
Trouble diagnosis chart by symptom

Revision: 2009 September

AV-775

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS >
Symptoms The CD cannot be removed. Check items

[BOSE AUDIO WITH NAVIGATION]


Possible malfunction location / Action to take Disk eject signal circuit malfunction between AV control unit and preset switch. Refer to AV-644, "Diagnosis Procedure". Amp. ON signal circuit. BOSE amp. power supply and ground circuit. Refer to AV-633, "BOSE AMP. : Diagnosis Procedure". Woofer amp. power supply and ground circuit. Refer to AV-634, "WOOFER : Diagnosis Procedure". Sound signal woofer circuit between BOSE amp. and woofer. Sound signal woofer circuit between BOSE amp. and woofer. Woofer amp. ON signal circuit between BOSE amp. and woofer. Sound signal center speaker circuit.

No sound from all speakers.

Audio sound is not heard.

There is no sound from the woofer.

There is no sound from the center speaker.

There is sound only from specific places Sound signal circuit of suspect system. (RH front, RH rear, LH front and LH rear). There is malfunction in the CONSULT-III self-diagnosis result. Perform CONSULT-III self-diagnosis. Refer to AV-601, "CONSULT-III Function (MULTI AV)". Perform the following inspection procedure. 1. Check antenna base mounting nut for looseness. NOTE: Tightening torque: 6.5 Nm (0.66 kg-m, 58 in-lb) 2. Visually check for satellite radio antenna feeder. 3. Replace the antenna base. Refer to AV-809, "Exploded View". 4. Replace the AV control unit. Refer to AV-787, "Exploded View". Antenna amp. ON signal circuit. Antenna feeder.

Satellite radio is not received.

There is no malfunction in the CONSULT-III self-diagnosis result.

AM/FM radio is not received.

Other audio sounds are normal.

RELATED TO iPod
Trouble diagnosis chart by symptom

Connect another iPod and check if the symptom is reproduced or not. If the symptom is reproduced, diagnose the vehicle. If no malfunction is detected, replace the iPod harness. NOTE: It is unable to read a connection between iPod and iPod harness.
Trouble diagnosis chart by symptom

Symptoms There is no sound from the iPod. It does not change to iPod mode. iPod is not connected is displayed when it comes to iPod mode. iPod cannot charge the battery. The title of music file in the iPod is not indicated. Accessing the iPod is unavailable from the vehicle.

Check items

Possible malfunction location / Action to take iPod sound signal circuit between AV control unit and iPod adapter. iPod sound signal circuit between iPod and iPod adapter. Perform CONSULT-III self-diagnosis. Refer to AV-601, "CONSULT-III Function (MULTI AV)". iPod connection recognition signal circuit between iPod and iPod adapter. iPod battery charge circuit between iPod and iPod adapter.

Other audio sounds are normal.

There is malfunction in the CONSULT-III self-diagnosis. Connected to iPod.

Communication circuit between iPod and iPod adapter.

Revision: 2009 September

AV-776

2010 Murano

MULTI AV SYSTEM SYMPTOMS


< SYMPTOM DIAGNOSIS > RELATED TO STEERING SWITCH
Trouble diagnosis chart by symptom
Trouble diagnosis chart by symptom

[BOSE AUDIO WITH NAVIGATION]


A

Symptoms None of the steering switch operations work. Only specified switch (1) cannot be operated. Steering switch's SOURCE, MENU UP, MENU DOWN, , ENTERswitches do not work.

Probable malfunction location Steering switch signal GND circuit malfunction. Refer to AV-656, "Diagnosis Procedure". Steering switch malfunction. Refer to AV-798, "Exploded View". Steering switch signal A circuit malfunction. Refer to AV-652, "Diagnosis Procedure". Steering switch signal B circuit malfunction. Refer to AV-654, "Diagnosis Procedure".

Steering switch's , VOL UP, VOL DOWN, switches do not work.

RELATED TO AUXILIARY INPUT


NOTE: Check that there is no malfunction of AUX equipment main body before performing a diagnosis.
Trouble diagnosis chart by symptom

F
Check items Vocal sound is heard when other modes are selected. Camera image is displayed. Probable malfunction location AUX sound signal circuit (auxiliary input jacks to AV control unit). AUX image signal circuit malfunction. Refer to AV-643, "Diagnosis Procedure".

Symptoms No vocal sound is heard when AUX mode is selected. Image is not displayed when AUX mode is selected.

AV

Revision: 2009 September

AV-777

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION]

NORMAL OPERATING CONDITION


Description
NOTE: For Navigation system operation information, refer to Navigation system Owner's Manual. Vehicle operation information, refer to Owner's Manual.
INFOID:0000000005528814

BASIC OPERATIONS
Symptom Possible cause The brightness is at the lowest setting. No image is displayed. The systems in the video mode. The display is turned off. No voice guidance is available. Or The volume is too high or too low. No map is displayed on the screen. The screen is too dim. The movement is slow. Some pixels in the display are darker or brighter than others. Some menu items cannot be selected. The volume is not set correctly, or it is turned off. Voice guidance is not provided for certain streets (roads displayed in gray). A screen other than map screen is displayed. The temperature in the interior of the vehicle is low. This condition is an inherent characteristic of liquid crystal displays. Some menu items become unavailable while the vehicle is driven. Possible solution Adjust the brightness of the display. Press <DISC-AUX> to change the mode. Press <Day/Night> to turn on the display. Adjust the volume of voice guidance. This is not a malfunction. Press <MAP>. Wait until the interior of the vehicle has warmed up. This is not a malfunction. Park the vehicle in a safe location, and then operate the navigation system.

NOTE: Locations stored in the Address Book and other memory functions may be lost if the vehicle's battery is disconnected or becomes discharged. If this occurs, service the vehicle's battery as necessary and re-enter the information in the Address Book.

RELATED TO VOICE RECOGNITION


Related to Basic Operation
Symptom Possible cause The interior of the vehicle is too noisy. The volume of your voice is too low. The volume if your voice is too loud. Your pronunciation is unclear. The system does not recognize your command. or The system recognizes your command incorrectly You are speaking before the voice recognition is ready Possible solution Close the windows or have other occupants quiet. Speak louder. Speak softer. Speak clearly. Press and release switch on the steering switch, and speak a command after the tone sounds. Make sure to speak a command within 8 seconds after you press and release steering switch. switch on the

8 seconds or more have passed after you pressed and released switch on the steering switch.

Only a limited range of voice commands is usable for each screen.

Use a correct voice command appropriate for the current screen. If the air conditioner is set to Auto, the fan speed is automatically lowered and voice commands can be recognized more easily. Lower the fan speed as necessary or set the air conditioner to Auto.

The fan of the air conditioner is too loud.

Related to Item Choice The system should respond correctly to all voice commands without difficulty. If problems are encountered, follow the solutions given in this guide for the appropriate error.

Revision: 2009 September

AV-778

2010 Murano

NORMAL OPERATING CONDITION


[BOSE AUDIO WITH NAVIGATION] < SYMPTOM DIAGNOSIS > Where the solutions are listed by number, try each solution in turn, starting with number one, until the problem is resolved.
Symptom/ error message Solution 1. Ensure that the command format is valid. 2. Speak clearly without pausing between words and at a level appropriate to the ambient noise level. Displays COMMAND NOT RECOGNIZED or the system fails to interpret the command correctly. 3. Ensure that the ambient noise level is not excessive, for example, windows open or defrost on. NOTE: If it is too noisy to use the phone, it is likely that voice commands will not be recognized. 4. If optional words of the command have been omitted, then command should be tried with these in place. The system consistently selects the wrong voicetag 1. Ensure that the voicetag requested matches what was originally stored. This can be confirmed by giving the Addressbook Directory or Phone Directory command. 2. Replace one of the voicetags being confused with a different voicetag.

Related to Telephone The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
Symptom 1. Ensure that the command is valid. 2. Ensure that the command is spoken after the tone. 3. Speak clearly without pausing between words and at level appropriate to the ambient noise level in the vehicle. System fails to interpret the command correctly. 4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized. 5. If more than one command was said at a time, try saying the commands separately. 6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. See Speaker adaptation (SA) mode earlier in this section. Refer to OWNERS MANUAL. The system consistently selects the wrong voicetag 1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the List Names command. 2. Replace one of the names being confused with a new name. Solution

RELATED TO AUDIO
The majority of the audio malfunctions are the result of outside causes (bad CD/cassette, electromagnetic interference, etc.). Check the symptoms below to diagnose the malfunction. AV The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning. Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and operation of each piece of electrical equipment, and then determine the cause. O NOTE: CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be incorrectly mastered by the customer on a computer. Check if the CDs carry the Compact Disc Logo. If not, the disc is not mastered to the red book Compact P Disc Standard and may not play.

Revision: 2009 September

AV-779

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS >
Symptom

[BOSE AUDIO WITH NAVIGATION]


Cause and Counter measure Check if the CD/CF was inserted correctly. Check if the CD/CF is scratched or dirty. Check if there is condensation inside the player, and if there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the player will play correctly after it returns to the normal temperature.

Cannot play

If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music CD files (CD-DA data) will be played. Files with extensions other than .MP3, .WMA, .mp3, or .wma cannot be played. In addition, the character codes and number of characters for folder names and file names should be in compliance with the specifications. Check if the disc or the file is generated in an irregular format, This may occur depending on the variation or the setting of MP3/WMA writing applications or other text editing applications. Check if the finalization process, such as session close and disc close, is done for the disc. Check if the CD/CF is protected by copyright.

Poor sound quality It takes a relatively long time before the music starts playing. Music cuts off or skips Skipping with high bit rate files Move immediately to the next song when playing The songs do not play back in the desired order.

Check if the CD/CF is scratched or dirty. If there are many folder or file levels on the MP3/WMA CD/CF, or if it is a multisession disc, some time may be required before the music starts playing. The writing software and hardware combination might not match, or the writing speed, writing depth, writing width might not match the specifications. Try using the slowest writing speed. Skipping may occur with large quantities of data such as high bit rate data. When a non-MP3/WMA file has been given an extension of .MP3, .WMA, .mp3, or .wma, or when play is prohibited by copyright protection, the player will skip to the next song. The playback order is the order in which the files were written by the software, so the files might not play in the desired order.

Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise from trains and other sources, is not a malfunction. NOTE: Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking the signal. Multi-path noise: This noise results from a time difference between the broadcast waves directly from the station arriving at the antenna and the waves reflected by mountains or buildings.

RELATED TO VEHICLE ICON


Symptom Possible cause This is because the quantity of the displayed information is reduced so that the screen does not become too crowded. There is also a chance that names of the roads may be displayed multiple times, and the names appearing on the screen may be different because of a processing procedure. The vehicle was transported after the ignition switch was pressed off, for example, by a ferry or car transporter. The position and direction of the vehicle icon may be incorrect depending on the driving environments and the levels of positioning accuracy of the navigation system. Because the new road is not stored in the map data, the system automatically places the vehicle icon on the nearest road available. Possible solution

Names of roads differ between Plan View and Birdview.

This is not a malfunction.

Drive the vehicle for a while on a road where GPS signals can be received. This is not a malfunction. Drive the vehicle for a while to automatically correct the position and direction of the vehicle icon. Updated road information will be included in the next version of the map data.

The vehicle icon is not displayed in the correct position.

When the vehicle is traveling on a new road, the vehicle icon is located on another road nearby.

Revision: 2009 September

AV-780

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS >
Symptom The screen does not switch to the night screen even after turning on the headlights. The map does not scroll even when the vehicle is moving. The vehicle icon is not displayed. Possible cause The daytime screen was set the last time the headlights were turned on. The current location map screen is not displayed. The current location map screen is not displayed. When using tire chains or replacing the tires, speed calculations based on the speed sensor may be incorrect. The map data has a mistake or is incomplete (the vehicle icon position is always misaligned in the same area).

[BOSE AUDIO WITH NAVIGATION]


Possible solution Set the screen to the night screen mode using <Day/Night> when you turn on the headlights. Press <MAP>. Press <MAP>. Drive the vehicle for a while (at approximately 19 MPH for about 30 minutes) to automatically correct the vehicle icon position. If this does not correct the vehicle icon position, contact an INFINITI dealer. Updated road information will be included in the next version of the map data.

The location of the vehicle icon is misaligned from the actual position.

RELATED TO ROUTE CALCULATION AND VISUAL GUIDANCE


Symptom Waypoints are not included in the auto reroute calculation. Possible cause Waypoints that you have already passed are not included in the auto reroute calculation. Route calculation has not yet been performed. Route information is not displayed. You are not driving on the suggested route. Route guidance is set to off. Route information is not provided for certain types of roads (roads displayed in gray). The auto reroute calculation (or detour calculation) suggests the same route as the one previously suggested. Route calculations took priority conditions into consideration, but the same route was calculated. Possible solution If you want to go to that waypoint again, you need to edit the route. Set the destination and perform route calculation. Drive on the suggested route. Turn on route guidance. This is not a malfunction.

This is not a malfunction.

A waypoint cannot be added.

Five waypoints are already set on the route, including ones that you have already passed.

A maximum of 5 waypoints can be set on the route. If you want to go to 6 or more waypoints, perform route calculations multiple times as necessary. Reset the destination to a main or ordinary road, and recalculate the route. Set a more distant destination. Divide your trip by selecting one or two intermediate destinations, and perform route calculations multiple times. Set [Use Time Restricted Roads] to off.

Roads near the destination cannot be calculated. The starting point and destination are too close. The suggested route is not displayed.

The starting point and destination are too far away.

AV

There are time restricted roads (by the day of the week, by time) near the current vehicle location or destination. The part of the route that you have already passed is deleted. A route is managed by sections between waypoints. If you passed the first waypoint, the section between the starting point and the waypoint is deleted. (It may not be deleted depending on the area.) If there are restrictions (such as one-way streets) on roads close to the starting point or destination, the system may suggest an indirect route. The system may suggest an indirect route because route calculation does not take into consideration some areas such as narrow streets (gray roads.)

This is not a malfunction.

Adjust the location of the starting point or destination. Reset the destination to a main or ordinary road, and recalculate the route.

An indirect route is suggested.

Revision: 2009 September

AV-781

2010 Murano

NORMAL OPERATING CONDITION


< SYMPTOM DIAGNOSIS >
Symptom The landmark information does not correspond to the actual information. The suggested route does not exactly connect to the starting point, waypoints, or destination. Possible cause This may be caused by insufficient or incorrect map data.

[BOSE AUDIO WITH NAVIGATION]


Possible solution Updated information will be included in the next version of the data. Set the starting point, waypoints and destination on a main road, and perform route calculation.

There is no data for route calculation closes to these locations.

RELATED TO VOICE GUIDANCE


Symptom Possible cause Voice guidance is only available at certain intersections marked with? In some cases, voice guidance is not available even when the vehicle should make a turn. Voice guidance is not available The vehicle has deviated from the suggested route. Voice guidance is set to off. Route guidance is set to off. The guidance contact does not correspond to the actual condition. The contact of voice guidance may vary, depending on the types of intersections at which turn are made. Possible solution This is not a malfunction. Go back to the suggested route or request route calculation again Turn on voice guidance. Turn on voice guidance. Follow all traffic rules and regulations.

RELATED TO TRAFFIC INFORMATION


Symptom Possible cause The traffic information is not set to on. Possible solution Set the traffic information to on.

The traffic information is not displayed

You are in an area where traffic information is not avail- Scroll to an area where traffic information is able available You have not subscribed to XM NavTraffic or, your subCheck your subscription status of XM NavTraffic. scription to XM NavTraffic has expired. The map scale is set at a level where the display of icons is impossible. Check that the map scale is set at a level in which the display of icons is possible. The automatic detour search is not intended for avoiding traffic jams. It searches for the fastest route taking into consideration such things as traffic jams. Observe the actual road condition and follow the instructions on road for detour when necessary. If the road closure is for certain, use detour function and set the detour distance to avoid the closed road section. Observe the actual road conditions and regulations. Always observe safe driving practices and follow all traffic regulations.

With the automatic detour route search ON, no detour route is set to avoid congested areas. The route does not avoid road section with traffic information stating it is closed due to road construction. Traffic information displayed differs from information from other media (e.g. radio).

There is no faster route compared to the current route, based on the road network and traffic information.

The navigation system is designed not to avoid this event because the actual period of closure may differ from the declared roadwork period.

Other media may use different information sources.

Revision: 2009 September

AV-782

2010 Murano

PRECAUTIONS
< PRECAUTION > [BOSE AUDIO WITH NAVIGATION]
A

PRECAUTION
PRECAUTIONS
FOR USA AND CANADA
FOR USA AND CANADA : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000005528815

The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted. Information necessary to service the system safely is included in the SRS AIR BAG and SEAT BELT of this Service Manual. WARNING: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS AIR BAG. Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS


WARNING: When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service.
I

FOR USA AND CANADA : Precaution for Trouble Diagnosis


AV COMMUNICATION SYSTEM

INFOID:0000000005589979

Do not apply voltage of 7.0 V or higher to the measurement terminals. Use the tester with its open terminal voltage at 7.0 V or less. Turn ignition switch OFF and disconnect the battery cable from the negative terminal before checking the circuit.

FOR USA AND CANADA : Precaution for Harness Repair


AV COMMUNICATION SYSTEM
Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

INFOID:0000000005589980

AV

PKIA0306E

Revision: 2009 September

AV-783

2010 Murano

PRECAUTIONS
[BOSE AUDIO WITH NAVIGATION] < PRECAUTION > Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

PKIA0307E

FOR MEXICO
FOR MEXICO : Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
INFOID:0000000005589981

The Supplemental Restraint System such as AIR BAG and SEAT BELT PRE-TENSIONER, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain types of collision. Information necessary to service the system safely is included in the SRS AIR BAG and SEAT BELT of this Service Manual. WARNING: To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in the event of a collision which would result in air bag inflation, all maintenance must be performed by an authorized NISSAN/INFINITI dealer. Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag Module, see the SRS AIR BAG. Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS


WARNING: When working near the Air Bag Diagnosis Sensor Unit or other Air Bag System sensors with the ignition ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing serious injury. When using air or electric power tools or hammers, always switch the ignition OFF, disconnect the battery, and wait at least 3 minutes before performing any service.

FOR MEXICO : Precaution for Trouble Diagnosis


AV COMMUNICATION SYSTEM

INFOID:0000000005528816

Do not apply voltage of 7.0 V or higher to the measurement terminals. Use the tester with its open terminal voltage at 7.0 V or less. Turn ignition switch OFF and disconnect the battery cable from the negative terminal before checking the circuit.

FOR MEXICO : Precaution for Harness Repair


AV COMMUNICATION SYSTEM

INFOID:0000000005528817

Revision: 2009 September

AV-784

2010 Murano

PRECAUTIONS
[BOSE AUDIO WITH NAVIGATION] < PRECAUTION > Solder the repaired parts, and wrap with tape. [Frays of twisted line must be within 110 mm (4.33 in).]

C
PKIA0306E

Do not perform bypass wire connections for the repair parts. (The spliced wire will become separated and the characteristics of twisted line will be lost.)

G
PKIA0307E

AV

Revision: 2009 September

AV-785

2010 Murano

PREPARATION
< PREPARATION > [BOSE AUDIO WITH NAVIGATION]

PREPARATION
PREPARATION
Commercial Service Tools
Tool name Description
INFOID:0000000005528818

Power tool

Loosening screws

PBIC0191E

Revision: 2009 September

AV-786

2010 Murano

AV CONTROL UNIT
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A

REMOVAL AND INSTALLATION


AV CONTROL UNIT
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".
INFOID:0000000005528819

DISASSEMBLY
D

JPNIA0799ZZ

1. 4.

AV control unit Bracket RH

2.

Bracket LH

3.

A/C auto amp.

J
INFOID:0000000005528820

Removal and Installation


REMOVAL
1. 2. 3. Remove cluster lid C. Refer to IP-12, "Exploded View". Remove AV control unit with a A/C auto amp. as a single unit from the body. Remove bracket screws, and then remove AV control unit.

INSTALLATION
Install in the reverse order of removal.
M

AV

Revision: 2009 September

AV-787

2010 Murano

FRONT DISPLAY UNIT


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

FRONT DISPLAY UNIT


Exploded View
INFOID:0000000005528821

JPNIA0779ZZ

1.

Front display unit


INFOID:0000000005528822

Removal and Installation


REMOVAL
1. 2. Remove center ventilator assembly. Refer to IP-12, "Exploded View". Remove display unit with bracket as a single unit.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-788

2010 Murano

FRONT DOOR SPEAKER


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528823

FRONT DOOR SPEAKER


Exploded View

D
JPNIA0773ZZ

E
1. Front door speaker
INFOID:0000000005528824

Removal and Installation


REMOVAL
1. 2.

Remove front door finisher. Refer to INT-12, "FRONT DOOR FINISHER : Exploded View". Remove front door speaker screws, then disconnect front door speaker connector and remove front door speaker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-789

2010 Murano

REAR DOOR SPEAKER


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

REAR DOOR SPEAKER


Exploded View
INFOID:0000000005528825

JPNIA0774ZZ

1.

Rear door speaker


INFOID:0000000005528826

Removal and Installation


REMOVAL
1. 2.

Remove rear door finisher. Refer to INT-16, "REAR DOOR FINISHER : Exploded View". Remove rear door speaker screws, then disconnect rear door speaker connector and remove rear door speaker.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-790

2010 Murano

FRONT SQUAWKER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528827

FRONT SQUAWKER
Exploded View

D
JPNIA0775ZZ

E
1. Front squawker
INFOID:0000000005528828

Removal and Installation


REMOVAL
1. 2.

Remove speaker grille. Refer to IP-12, "Exploded View". Remove front squawker screws, lift up the front squawker and disconnect front squawker connector. Then remove the front squawker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-791

2010 Murano

REAR SPEAKER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

REAR SPEAKER
Exploded View
INFOID:0000000005528829

JPNIA0781ZZ

1. 2.

Rear speaker Rear speaker bracket


INFOID:0000000005528830

Removal and Installation


REMOVAL
1. 2.

Remove luggage side finisher upper. Refer to INT-34, "Exploded View". Remove rear speaker screws, lift up the rear speaker and disconnect rear speaker connector. Then remove the rear speaker.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-792

2010 Murano

CENTER SPEAKER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528831

CENTER SPEAKER
Exploded View

D
JPNIA0780ZZ

E
1. Center speaker
INFOID:0000000005528832

Removal and Installation


REMOVAL
1. 2.

Remove center speaker grille. Refer to IP-12, "Exploded View". Remove center speaker screws, lift up the center speaker and disconnect center speaker connector. Then remove the center speaker.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-793

2010 Murano

WOOFER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

WOOFER
Exploded View
INFOID:0000000005528833

JPNIA0782ZZ

: 1. 2.

Vehicle front Clamp Woofer


INFOID:0000000005528834

Removal and Installation


REMOVAL
1. 2. Remove luggage floor finisher center (back). Refer to INT-34, "Exploded View". Remove clamp, disconnect woofer connector and remove the woofer.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-794

2010 Murano

BOSE AMP.
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528835

BOSE AMP.
Exploded View

D
JPNIA0783ZZ

E
: 1. Vehicle front BOSE amp.

Removal and Installation


REMOVAL
1. 2.

F
INFOID:0000000005528836

Remove luggage floor finisher. Refer to INT-34, "Exploded View". Remove BOSE amp. screws, disconnect BOSE amp. connector and remove the BOSE amp.
H

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-795

2010 Murano

MULTIFUNCTION SWITCH
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

MULTIFUNCTION SWITCH
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".
INFOID:0000000005528837

DISASSEMBLY

JPNIA0800ZZ

1. 2.

Multifunction switch Cluster lid D


INFOID:0000000005528838

Removal and Installation


REMOVAL
1. 2. 3. Remove cluster lid D. Refer to IP-12, "Exploded View". Remove multifunction switch with center ventilator grille as a single unit. Remove multifunction switch screws, remove multifunction switch from cluster lid D.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-796

2010 Murano

PRESET SWITCH
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528839

PRESET SWITCH
Exploded View
REMOVAL
Refer to IP-12, "Exploded View".

DISASSEMBLY

G
JPNIA0801ZZ

H
1. Preset switch 2. Cluster lid C
INFOID:0000000005528840

Removal and Installation


REMOVAL
1. 2. Remove cluster lid C. Refer to IP-12, "Exploded View". Remove preset switch screws (A) (B), remove preset switch (1) from cluster lid C.
1. A. B. Preset switch Screw Screw

M
JPNIA0802ZZ

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-797

2010 Murano

STEERING SWITCH
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

STEERING SWITCH
Exploded View
Refer to ST-17, "Exploded View".
INFOID:0000000005528841

Removal and Installation


REMOVAL
Refer to ST-17, "Exploded View".

INFOID:0000000005528842

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-798

2010 Murano

IPOD ADAPTER
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528843

IPOD ADAPTER
Exploded View

D
JPNIA0788ZZ

E
1. iPod adapter
INFOID:0000000005528844

Removal and Installation


REMOVAL
1. 2.

Remove front console pocket assembly. Refer to IP-20, "Exploded View". Disconnect iPod adapter connector, remove iPod adapter screws and remove the iPod adapter.

INSTALLATION
Install in the reverse order of removal.
H

AV

Revision: 2009 September

AV-799

2010 Murano

IPOD CONNECTOR
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

IPOD CONNECTOR
Exploded View
REMOVAL
Refer to IP-20, "Exploded View".
INFOID:0000000005528845

DISASSEMBLY

JPNIA0787ZZ

1.

iPod connector
INFOID:0000000005528846

Removal and Installation


REMOVAL
1. 2. Remove center console. Refer to IP-20, "Exploded View". Press the pawl from the back of center console to remove iPod connector.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-800

2010 Murano

AUXILIARY INPUT JACKS


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528847

AUXILIARY INPUT JACKS


Exploded View
REMOVAL
Refer to IP-20, "Exploded View".

DISASSEMBLY

JPNIA0795ZZ

F
1. Auxiliary input jacks
INFOID:0000000005528848

Removal and Installation


REMOVAL
1. 2. Remove console rear finisher. Refer to IP-20, "Exploded View". Remove auxiliary input jacks from center console.

INSTALLATION
Install in the reverse order of removal.

AV

Revision: 2009 September

AV-801

2010 Murano

MICROPHONE
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

MICROPHONE
Exploded View
REMOVAL
Refer to INL-121, "Exploded View".
INFOID:0000000005528849

DISASSEMBLY

JSNIA0132ZZ

1.

Microphone
INFOID:0000000005528850

Removal and Installation


REMOVAL
1. 2. Remove map lamp. Refer to INL-121, "Exploded View". Remove microphone from map lamp.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-802

2010 Murano

GPS ANTENNA
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528851

GPS ANTENNA
Exploded View Harness Layout

INFOID:0000000005528852

AV

JPNIA0803GB

Revision: 2009 September

AV-803

2010 Murano

GPS ANTENNA
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
INFOID:0000000005528853

Removal and Installation


REMOVAL
1. 2. 3. Remove combination meter. Refer to MWI-103, "Exploded View". Disconnect GPS antenna connector from AV control unit. Remove GPS antenna (1) from instrument panel.

JPNIA0804ZZ

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-804

2010 Murano

CAMERA CONTROL UNIT


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528854

CAMERA CONTROL UNIT


Exploded View

D
JPNIA0796ZZ

E
1. Camera control unit
INFOID:0000000005528855

Removal and Installation


REMOVAL
1. 2.

Remove luggage side finisher lower (RH). Refer to INT-34, "Exploded View". Remove camera control unit screws, disconnect camera control unit connector and remove the camera control unit.

INSTALLATION
Install in the reverse order of removal.

Adjustment
ADJUSTMENT

INFOID:0000000005528856

There may be a misalignment of possible route line center position of rear view monitor after removing camera control unit. Therefore, correct neutral position with the following procedure. 1. Steer the steering wheel to the leftmost and rightmost ends. 2. Drive vehicle at 30 km/h (18.6 MPH) min. speed at least 100 m (328.1 ft).

AV

Revision: 2009 September

AV-805

2010 Murano

REAR VIEW CAMERA


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

REAR VIEW CAMERA


Exploded View
INFOID:0000000005528857

JPNIA0797ZZ

1.

Rear view camera

2.

Finisher
INFOID:0000000005528858

Removal and Installation


REMOVAL
1. 2. 3.

Remove back door finisher inner. Refer to INT-38, "Exploded View". Remove finisher. Remove rear view camera screws, disconnect rear view camera connector and remove rear view camera from back door assembly.

INSTALLATION
Install in the reverse order of removal.

Adjustment

INFOID:0000000005528859

Adjust the guide line position if the guide line position is shifted after installing the rear view camera.

Revision: 2009 September

AV-806

2010 Murano

REAR VIEW CAMERA


[BOSE AUDIO WITH NAVIGATION] < REMOVAL AND INSTALLATION > 1. Draw lines on rearward area of the vehicle passing through the following points: 200 mm (7.87 in) from both sides of the vehicle, and 0.5 m (1.64 ft), 1.0 m (3.28 ft) from the rear end of the bumper. 2. Set into Adjust offset of rear view camera mode of Confirmation / Adjustment mode.

G
SKIB3691E

3.

Rotate the center dial, and then select the guiding line pattern so that its angle is aligned with the correction line of the rear of the vehicle. Selected pattern :7

4.

Make fine adjustment to the correction line of the rear of the vehicle with up/down/left/right switches so that its position is aligned with the guiding line. Press OK switch and record the adjusted guiding line position to the camera control unit. Up/Down adjustment range Left/Right adjustment range : 20 20 : 20 20
SKIB3689E

CAUTION: Never operate other function such as pressing BACK while writing index data. If Confirmation/Adjustment mode does not function in the above procedure, perform one of the following service to adjust the index again. Remove battery for five min. Then reconnect battery. Remove camera control unit connector for five min. Then reconnect camera control unit connector.

AV

Revision: 2009 September

AV-807

2010 Murano

STEERING ANGLE SENSOR


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

STEERING ANGLE SENSOR


Exploded View
REMOVAL
Refer to SR-14, "Exploded View" (for USA and Canada) or SR-40, "Exploded View" (for Mexico).
INFOID:0000000005528860

DISASSEMBLY

JSNIA0135ZZ

1. 2.

Spiral cable Steering angle sensor


INFOID:0000000005528861

Removal and Installation


REMOVAL
1. 2. Remove spiral cable. Remove steering angle sensor from spiral cable.

INSTALLATION
Install in the reverse order of removal.

Revision: 2009 September

AV-808

2010 Murano

ROOF ANTENNA
< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528862

ROOF ANTENNA
Exploded View

JPNIA0786ZZ

1.

Rod antenna

2.

Antenna bade & satellite radio antenna

Refer to GI-4, "Components" for symbols in the figure.

G
INFOID:0000000005528863

Removal and Installation


REMOVAL
1.

2. 3.

Remove headlining assembly (rear) to secure work space between vehicle and headlining. Refer to INT26, "NORMAL ROOF : Exploded View" [without sunroof] or INT-30, "SUNROOF : Exploded View" [with sunroof]. Disconnect AM/FM main connector and satellite radio antenna connector. Remove antenna base & satellite radio nut, and then remove antenna base &satellite radio antenna from roof panel.

INSTALLATION
Install in the reverse order of removal. Antenna base & satellite radio antenna mounting nut : 6.5 Nm (0.66 kg-m, 58 in-lb)

CAUTION: When Antenna base & satellite radio antenna mounting nut tightening torque is loose, be careful about tightening torque. Antenna sensitivity becomes poor, and when it is excessive, roof panel may become deformed.

AV

Revision: 2009 September

AV-809

2010 Murano

ANTENNA FEEDER (RADIO)


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

ANTENNA FEEDER (RADIO)


Harness Layout
INFOID:0000000005528864

JPNIA0803GB

Revision: 2009 September

AV-810

2010 Murano

ANTENNA FEEDER (SATELLITE RADIO)


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]
A
INFOID:0000000005528865

ANTENNA FEEDER (SATELLITE RADIO)


Harness Layout

AV

P
JPNIA0803GB

Revision: 2009 September

AV-811

2010 Murano

ANTENNA FEEDER (GPS)


< REMOVAL AND INSTALLATION > [BOSE AUDIO WITH NAVIGATION]

ANTENNA FEEDER (GPS)


Harness Layout
INFOID:0000000005528866

JPNIA0803GB

Revision: 2009 September

AV-812

2010 Murano

También podría gustarte