Documentos de Académico
Documentos de Profesional
Documentos de Cultura
FRENCH POLISH
Traditional French polishes are used to obtain an impressive deep gloss and smooth finish
on good quality furniture. The SHEENLAC polishes are to the same meticulous time proven
method that has been used for centuries. French polish produces a warm, dark transparent
coating which cannot be reproduced by modern synthetic lacquers. These products are
made from pure natural Shellac to give good clarity, build and ease of application.
RECOMMENDED USE
Suitable for French Polishing on all dark and light colored interior woods, when a light to medium brown
tone is required. Suitable for sealing wood pores before waxing.
TECHNICAL DATA
Appearance – Low viscous liquid.
Storage & Packing
Color – Straw yellow to light brown. Can be mixed To be stored in a cool, dry & well ventilated place away from
moisture, heat and direct sunlight.
with wood Stain to produce matching stains and
stain finishes
Packaging
Odour – Characteristic Ketone odour.
Finish – Glossy
200ml 500ml 1L 3L 5L 10 L 20 L
Gloss level (60° head) – Min 85
INSPIRING CREATIVITY
APPLICATION DETAILS
SURFACE PREPARATION: All wood surfaces must be clean, Application Method:
firm and dry. Remove any oil, grease, mortar droppings, etc. Ÿ Wrap a piece of cotton wool inside a lint free rag to form
NEW WOOD: Sand in the direction of the grain, to a smooth a pad or ‘Rubber’.
finish with 150 followed by 220 grit paper. Remove dust with a Ÿ Wearing suitable gloves, pour SHEENLAC French Polish
damp cloth. onto the cotton wool then squeeze the Rubber to release
PREVIOUSLY VARNISHED WOOD IN GOOD any excess.
CONDITION: Sand to obtain a smooth surface using 150 grit Ÿ Work the polish into the surface using a figure of eight
emery paper. Remove all sanding dust using a vacuum or cloth motion.
dampened with mineral spirits. Ÿ Apply several coats until the required finish is achieved,
For product related queries, feedback and quality complaints, Regd. Office: Sheenlac Paints Ltd.
please contact: Old No. 109B, New No.124, Developed Plots, SIDCO Industrial
Customer care: +91 8300 03 04 04 Estate, Ambattur, Chennai - 600098.
Email:ccc@sheenlac.in, Web: www.sheenlac.in
DISCLAIMER: The recommendations contained herein are given in all good faith and are meant to guide the specifier or the user. They are based on results gained from our tests and
experiences and are believed to be reliable. No guarantee is implied by the recommendations contained herein since conditions of use, method of application and cleanliness of the
substrate prior to painting are beyond our control. As application, environmental and design factors can vary, due care should be exercised in the selection and verification of the
performance and use of the coating
N.B: Technology may change with time necessitating changes to this Technical Data Sheet (TDS). It is the responsibility of the user to ensure that the latest TDS is being used
Ver.1.0/TDS/2017
INSPIRING CREATIVITY