Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Cap04 Carga Axial v2022
Cap04 Carga Axial v2022
Capítulo 4
Tema:
Cargas Axiales
Sumario
Principio de Saint-Venant.
Deformaciones elásticas en miembros
cargados axialmente.
Principio de Superposición.
Estructuras estáticamente indeterminadas
Esfuerzos térmicos.
Defectos de fabricación / tensiones de
montaje.
Concentración de esfuerzos.
2
Enunciado
La distribución de esfuerzos y deformaciones se puede
asumir independiente de la forma de aplicación de
carga, excepto en las inmediaciones de los puntos de
aplicación.
Deformación
unitaria
normal
P 2P P
= = stress = = =
P
A 2A A A
2
= = normal strain = = =
L L 2L L 6
Caso discreto:
• De la ley de Hooke:
P
= E = =
E AE
• Definición de deformación unitaria:
=
L
• Resolviendo,
PL
=
AE
• Para variaciones de la sección transversal o
propiedades del material,
PL
= i i
i Ai Ei 7
Caso continuo:
P( x) d
Sabemos que, = y =
A( x) dx
P( x) d
Usando la ley de Hooke tenemos: =E
A( x) dx
Despejando: L P( x)dx
=
0 A( x) E 8
Convención de signos:
• (+) Tracción
• (–) Compresión
Problema
SOLUTION:
• Divide the rod into components
at the load application points.
P2 = −15 103 lb
P3 = 30 103 lb
• Evaluate total deflection,
Pi Li 1 P1L1 P2 L2 P3 L3
= = + +
A
i i iE E 1A A 2 A 3
=
1 ( ) ( ) (
60 103 12 − 15 103 12 30 103 16
+ +
)
6
29 10 0.9 0.9 0.3
Problema Resuelto
SOLUTION:
• Apply a free-body analysis to the
bar BDE to find the forces
exerted by links AB and DC.
The rigid bar BDE is supported by two links • Evaluate the deformation of links
AB and CD. AB and DC or the displacements
Link AB is made of aluminum (E = 70 GPa) of B and D.
and has a cross-sectional area of 500 mm2. • Work out the geometry to find
Link CD is made of steel (E = 200 GPa) the deflection at E given the
2
and has a cross-sectional area of (600 mm ). deflections at B and D.
For the 30-kN force shown, determine the
12
deflection a) of B, b) of D, and c) of E.
UNIVERSIDAD PERUANA DE CIENCIAS APLICADAS UNIDAD 02: CARGA AXIAL
Miembros Cargados Axialmente
Displacement of B:
SOLUTION: PL
B =
Free body: Bar BDE AE
(− 60 103 N )(0.3 m )
=
(500 10-6 m2 )(70 109 Pa )
= −514 10− 6 m
Displacement of D: B = 0.514 mm
MB = 0 D =
PL
0 = −(30 kN 0.6 m ) + FCD 0.2 m AE
MD = 0
=
(600 10-6 m2 )(200 109 Pa )
0 = −(30 kN 0.4 m ) − FAB 0.2 m = 300 10− 6 m
Displacement of D:
BB BH
=
DD HD
0.514 mm (200 mm ) − x
=
0.300 mm x
x = 73.7 mm
EE HE
=
DD HD
E
=
(400 + 73.7 )mm
0.300 mm 73.7 mm
E = 1.928 mm
E = 1.928 mm 14
Problema Propuesto
La barra mostrada en la figura tiene una sección
transversal de 3 in 2 y E=35000ksi. Determine el
desplazamiento del punto A cuando está sometido a la
carga mostrada.
15
Problema Propuesto
La barra circular tiene un radio variable r = r0 e ax
y
está hecho de un material con módulo de elasticidad E.
Determinar el desplazamiento del punto A cuando está
sometido a la fuerza axial P.
16
P = P1 + P2
17
18
Pi Li 1.125 109
L = =
A
i i iE E
• Solve for the displacement at B due to the redundant
constraint,
P1 = P2 = − RB
δR =
Pi Li
=−
(
1.95 103 RB ) 21
A
i i iE E
UNIVERSIDAD PERUANA DE CIENCIAS APLICADAS UNIDAD 02: CARGA AXIAL
Indeterminación Estática
= −
(
1.125 109 1.95 103 RB)=0
E E
RB = 577 103 N = 577 kN
R A = 323 kN
RB = 577 kN 22
Problema Resuelto
24
Problema Resuelto
25
Problema Resuelto
26
Problema
propuesto
27
Si un elemento
estructural se fabrica
con su longitud
ligeramente diferente a
la especificada (mayor
o menor), dicho
elemento no se ajustará
a la estructura de la
manera propuesta.
Defectos de fabricación (esfuerzos de montaje)
32
Problema Resuelto
SOLUTION:
• Determine the geometric ratios and
find the stress concentration factor
from Fig. 2.64b.
Determine the largest axial load P
that can be safely supported by a • Find the allowable average normal
flat steel bar consisting of two stress using the material allowable
portions, both 10 mm thick, and normal stress and the stress
respectively 40 and 60 mm wide, concentration factor.
connected by fillets of radius r = 8 • Apply the definition of normal stress
mm. Assume an allowable normal to find the allowable load.
stress of 165 MPa.
33