Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Apuntes JFK
NETWORKS
A tool for Veraz PSEs that helps them analyze GW problems. It must be installed in the xMS server. Activate after installation as follows: Start Programs Traffic Monitor
Traffic Monitor
Traffic Monitor
NETWORKS
The Traffic monitor scope Voice This course will describes how to configure and activate the monitor options
Traffic Monitor
IP Recording
Dynamic Recording
IP Recording
Monitor location
NETWORKS
Side A
D 3 2 M D S P K T P S M
Side B
T P S M D S P K D 3 2 M
IP
ICON list
NETWORKS
Connection to MG cards
NETWORKS
1.Connect to the Terminal 2.Select the MG address IP card 3.Click Get card
Row..
NETWORKS
In the details table double click on the first empty row. In the Configuration Row window, select - All Trunks option.
Connect the MG
NETWORKS
MG connection was created Mark the MG card and click on the Connect - Icon
Led View
NETWORKS
Right click and select , TDM Recording in TM Assigned a new folder in the file name and click on Start TDM recording will start
End of record
NETWORKS
When we wish to end the record, from the Led View window select the Stop Record icon and select Stop TDM Recording (in TM) Select the TDM record Stop TDM Record A new record file was created
Recording Proc
NETWORKS
Select the Recording Proc icon and open the recorded file
Recording Proc
NETWORKS
Mark the lower check box Click on the Analyze icon Two . BIN file were created
Second possible option is to record a TDM channel from the Interface management card
Select the D32M card Select the SPAN location Select Start Sniff
Select the Recording Proc icon and open the recorded file
2 .snf files were created Use the Tdm2cap to create .eth file
IP sniffing
NETWORKS
Possible option to record different types of Signaling over IP Select the card Select IP sniffing (in TM) option
Types of filter
NETWORKS
Stop IP sniffing
NETWORKS
Dynamic Records
NETWORKS
The ability to record using the Traffic Monitor with out knowing the TS location.
(The TS that was selected for test call )
Connect
xMS
GW
CRCX Recall
Call Trace
CCP
Stop recording
NETWORKS
Select the STOP tab to stop recording Two types of file were created
.IP and .TDM
TDM file..
NETWORKS
Select the Recording Proc icon and open the recorded file 4 Voice file were created
IP file..
NETWORKS
Or . Select the message and right click it Select Show packet in new window
NETWORKS