Documentos de Académico
Documentos de Profesional
Documentos de Cultura
VORATEC SD 211
Polyol
Description
VORATEC* SD 211 polyol is fully VORATEC SD 211 polyol already This formulation gives foam with
formulated polyether polyol to be contains HCFC 141b premixed and good flowability and dimensional
used with VORATEC SD 100 can be processed directly on high stability as well as good adhesion
isocyanate to make rigid poly- and low pressure equipment. and short demould time.
urethane foam for refrigerator and
freezer insulation.
*Trademark of The Dow Chemical Company See "Handling and Storage" last page !
Dow Plastics, a business group of The Dow Chemical Company and its subsidiaries. Form No. 109-51151-0101MJ
CH 381-174-E-0101
Page 1 of 3
Reaction Characteristics1 Units Handmix High pressure
machine
Cream time sec. 11-15 7-9
Gel time sec. 77-90 49-59
Tack free time sec. 125-145 85-110
3
Free rise density kg/m 24-27 21-24
1
Reaction characteristics at 20°C component temperature. Actual values vary depending on processing conditions.
NOTICE: The information and data contained herein do not constitute sales specifications. The product properties may be changed without notice. No liability, war-
ranty or guarantee of product performance is created by this document. It is the Buyer's responsibility to determine whether Dow products are appropriate for Buyer's
use and to ensure that Buyer's workplace and disposal practices are in compliance with applicable laws and regulations. No freedom from any patents or other indus-
trial or intellectual property rights is granted or to be inferred. (January 2001)