Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Makrolon 2205
Makrolon 2205
Makrolon® 2205 - PC
Covestro Deutschland AG
Funciones
1E5
1E2
1E4
www.campusplastics.com www.campusplastics.com
1E1 1E3
1E1 1E2 1E3 1E4 1E5 1E1 1E2 1E3 1E4 1E5
0 °C
23 °C
1E2 1E0 Y 40 °C
1E2 80
60 °C
Y
90 °C
G" in MPa
tan d in
120 °C
Esfuerzo in MPa
1E1 Y
1E1 1E-1 60
Y
Y - Limite Elástico
Y
1E0 Y
1E-2 40
1E0 Y
1E-1 www.campusplastics.com 20
1E-1 1E-3
-100 -50 0 50 100 150 200
Temperatura in °C www.campusplastics.com
0
0 2 4 6 8 10
Alargamiento in %
3000 -20 °C 50 1 h
0 °C 10 h
23 °C 100 h
2500 40 °C 1000 h
40
60 °C 10000 h
Módulo secante in MPa
90 °C 100000 h
120 °C
Esfuerzo in MPa
2000 30
Y - Limite Elástico
1500 20
Y
1000
Y Y 10
Y
Y Y
Y
www.campusplastics.com www.campusplastics.com
500 0
0 2 4 6 8 10 0 1 2 3 4 5 6
Alargamiento in % Alargamiento in %
2500 5 MPa 40 1 h
Módulo de plastodeformación in MPa
10 MPa 10 h
15 MPa 100 h
2000 20 MPa 1000 h
25 MPa 30 10000 h
30 MPa 100000 h
1500 35 MPa
Esfuerzo in MPa
40 MPa
20
1000
www.campusplastics.com
500
1E0 1E1 1E2 1E3 1E4 1E5 10
Tiempo in h
www.campusplastics.com
0
0 1 2 3 4 5 6
Alargamiento in %
1800 5 MPa 25 1 h
Módulo de plastodeformació in MPa
10 MPa 10 h
1600 15 MPa 100 h
20 MPa 1000 h
20
1400 25 MPa 10000 h
30 MPa 100000 h
1200 35 MPa
Esfuerzo in MPa
15
1000
800 10
www.campusplastics.com
600
1E0 1E1 1E2 1E3 1E4 1E5
5
Tiempo in h
www.campusplastics.com
0
0 0.5 1 1.5 2 2.5 3 3.5
Alargamiento in %
1800 5 MPa 25 h
Módulo de plastodeformación in MPa
1
10 MPa 10 h
1600 15 MPa 100 h
20 MPa 1000 h
20
1400 25 MPa 10000 h
1200
Esfuerzo in MPa
15
1000
800 10
www.campusplastics.com
600
1E0 1E1 1E2 1E3 1E4 1E5
5
Tiempo in h
www.campusplastics.com
0
0 1 2 3 4
Alargamiento in %
1600 5 MPa 14 h
Módulo de plastodeformación in MPa
1
10 MPa 10 h
1400 15 MPa 100 h
12
20 MPa 1000 h
1200 10000 h
10
1000
Esfuerzo in MPa
8
800
600 6
www.campusplastics.com
400 4
1E0 1E1 1E2 1E3 1E4
Tiempo in h 2
www.campusplastics.com
0
0 1 2 3 4 5 6
Alargamiento in %
300
0.8
200
www.campusplastics.com www.campusplastics.com
100 0.75
1E0 1E1 1E2 1E3 1E4 0 50 100 150 200 250 300 350
Tiempo in h Temperatura in °C
Caracterúticas
Demás información
PROCESSING
Melt temperature: 280-320 °C
Mold temperature: 80-100 °C
These values are typical values only. Unless explicitly agreed in written form, the do not constitute a binding material specification or
warranted values. Values may be affected by the design of the mold/die, the processing conditions and coloring/pigmentation of the
product. Unless specified to the contrary, the property values given have been established on standardized test specimens at room
temperature.
General
The manner in which you use and the purpose to which you put and utilize our products, technical assistance and information (whether
verbal, written or by way of production evaluations), including any suggested formulations and recommendations, are beyond our control.
Therefore, it is imperative that you test our products, technical assistance, information and recommendations to determine to your own
satisfaction whether our products, technical assistance and information are suitable for your intended uses and applications. This
application-specific analysis must at least include testing to determine suitability from a technical as well as health, safety, and
environmental standpoint. Such testing has not necessarily been done by Covestro.
Unless we otherwise agree in writing, all products are sold strictly pursuant to the terms of our standard conditions of sale which are
available upon request. All information and technical assistance is given without warranty or guarantee and is subject to change without
notice. It is expressly understood and agreed that you assume and hereby expressly release us from all liability, in tort, contract or
Last update: 2022-10-31 Source: https://www.campusplastics.com Página: 6/7
Makrolon® 2205 - PC
Covestro Deutschland AG
otherwise, incurred in connection with the use of our products, technical assistance, and information. Any statement or recommendation
not contained herein is unauthorized and shall not bind us. Nothing herein shall be construed as a recommendation to use any product in
conflict with any claim of any patent relative to any material or its use. No license is implied or in fact granted under the claims of any
patent.
Medical Grades
Only Covestro products that are designated as “Medical Grade”may be used in medical devices or intermediates of medical devices. The
designation as “Medical Grade” does not mean that Covestro or anyone else has determined that the product is suitable for use in any
particular Medical Application. Except when Covestro has expressly agreed in writing to the sale of these products for such applications,
Covestro products designated as “Medical Grade” shall not be considered candidates for any Medical Applications in: (a) cosmetic,
reconstructive or reproductive implants, (b) other body implants, (c) applications involving contact with or storage of human tissue, blood or
other bodily fluids for longer than 30 days, or (d) applications involving contact for longer than 24 hours with circulating blood, tissue, bone
or dentin.
For further information on the use of Covestro products in Medical Applications, please request from your sales support contact our
Guidance document: GUIDANCE ON USE OF COVESTRO PRODUCTS IN A MEDICAL APPLICATION.
plastics.covestro.com