VF 400 Godin Avenue 10f2
LAE Quebec oe QC G1M 2K2
anada
CALIBRATION CERTIFICATE
Customer: Address:
Description: Optical Time Domain Reflectometer (OTDR)
Serialno. 1181557 Model no.: 7300-SM2-EA,
Calibration UF Block G Furing High-Tech Park, No.7, Xian Avenve, FOS. catration dat: 2018-11-18
‘As found
ia catraton |CTspeciheatone @_|Clspeitntons (iy [Clspeciatons cy [Clspeteatons oy [lopeston
“See resus page for datas on As found status
(Comments on unit status
‘Action taken
IINo adjustment was made ‘Adjustments were made [Repair was performed
As loft
Within specifications: Outside specications:
Calibration conditions
Temperature: 23°C +2°C
Standard(e) used to establish traceability
Description Tnventory number [Calibration date [Calibration validity
Standard(s) used for “As left” measurements
METAS Length Reference Fiber SM LRF2012.02 [2012-05-28 indefinite
Remarks:
‘Optical pons are always Geared before calibration
EXFO certfies that the unit has been calibrated using standards traceable to 2 national metrology insbtute (NIST. NPL. NRC. METAS or ether)
natural physical constants or using ratio measurements, NIST isthe National Institute of Standards and Technology in the USA, NPLis the
National Physical Laboratory n the UK, NRC isthe National Research Council in Canada and METAS is the Swiss Federal Ofice of Metrology
All uncertainties are reported with a level of confidence of 95 %. Calibration is based on the ISOVIEC 17025 standard
“The certiicate shall not be reproduced. excep! in ful, without the writan approval of EXFO.
ices
rani
ee
CERT-00161H
2018-11-15
DateOptical Tine Domain Relectometer(OTDR)
Model no.: 730C-SM2-EA 2 of 2
Serial no: 1181557
Calibration date 2018-11-45
Dynamic range test (Single Mode)
Procedure: IETA-0066 (pulse: 10 ys, range: 240 km, time: 45 5)
Nominal wav mi Test imi
oral wave Measured eyrariraros ait arr
A ie
7310 208 WS Pass
7550 379 350) Pase
1625 384 354 Pass
“Atienuation dead zone test (Single Mode)
Provedure: TETA-00966 (pulse: 10 ns, range: 065 km, reflectance #5 0B)
Nomin Measured atenvation dead zon Test imi
aivavaongh ec ater e cit etn
Bs ake
7310 a7 aa? Pass
1550 395 470 Pass
1825 402 477 Pass
Event dead zone text (Single Mode]
Procedure: IETA-00366 (oulse: 3 ne, range: 0.65 km, releclance’ 45 4B)
Renna naan Messed eyo cho one Tei inaiar
Tae
1310 0.46 I 0.55 Pass
7550 047 059 Pass
1625 050 064 Pass
[ Distance calibration (Single Mode)
Procedure: 1ETA-00966 (pulse: 50 ns, range: 35 km tive: 153)
(ominal wavelength | Measured length | Reference length | Deviation | Uncertainty | Speciicaton | Conformance ink 7
Nona warero|Weasiee ath Ratrencs ra Denston | Urcrant | Specfeat rane vertcaton
Asta
710 | _ 236080 736071 019 [006 os 082 i
1550 2361.70 2361.69 __| 007 | 028 087 074 i
1625 7362.18 76229 | om | 018 087, 0.82, i
Linearity test (Single Mode)
Procedure: IETA-00366 (wavelength: 1310 nm, pulse: 10 ps, range: 25.3 dB, time: 45 6)
Measured non linearity “Test mit
(a) (dB) Verification
As left
one 5.08 Pass,
OTDR Self-Test
Procedure: |ETA-00366
‘Status (Pass/Fail)
Asleft
Pass.
* Verification status legend:
1) Within specifications
i) Within specifications: All measured results are within specications limits. In conformance with ISO/IEC 17025, full compliance cannot be stated
because of measurement uncertainties. Nevertheless, results indicate that the instrument is ikely to perform according to specifications;
ii) Outside spectications: Some measured results are outside specification limits. Nevertheless, a8 per ISOMEC 17025, non compliance cannot be
Slated because of measurement uncertainties:
iv) Outside specifications.
Uniess otherwise stated, 100 % of shipped units nave all “As left" results in casei
CERT-00151H