Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Va l v e s f o r D a m & R e s e r v o i r Applications
www.glenfield.co.uk
Introduction
Glenfield Valves' manufacturing facilities are located at an 8 acre riverside location in Kilmarnock, Scotland. Since Glenfield Valves Ltd became part of The AVK Group in 2001 considerable investments have taken place in infrastructure improvements, product re-design to reflect improvements in operation, and the latest technology in machine tools and management information systems. Glenfield Valves has always been a valve manufacturer with a global outlook and today is part of a leading valve manufacturer, complying to various international valve standards such as BS, EN, DIN, AWWA, AS, ISO etc. Since Glenfield designed its first Fixed Cone Free Discharge Valve in 1950, we have been a highly rated supplier for Dams, Reservoirs and Hydro Power projects. Some of our many references are mentioned on page 15. Our Aim is to become : Your Reliable Long Term Partner with Focus on Providing a Comprehensive Range of High Quality Valves for Flow Control Applications We will achieve this through our focused product management strategy, our innovative approach to design and manufacturing and long term reliance to our customers.
Index
FEATURES
Energy Efficiency: A gate valve has much lower head loss than a butterfly valve, therefore consumes much less energy during system operation. The annual electrical energy savings that result from using a Glenfield gate valve over a butterfly valve are therefore considerable. The full open headloss coefficient for large gate valves is 0.05 against 0.18 for butterfly valves. Hence an energy saving of 75% Full Clear Bore Suitable for higher velocities in full open position than most other isolating valves Performance and reliability for more than a century (gate valves are not designed for throttling but for fully open - fully closed service)
Thrust is taken in gearbox / actuator and valves must be operated with a gearbox or actuator.
Double offset disc allows the seal to disengage immediately on opening, reducing seal wear. Low profiled disc ensures higher Cv values. Profiled body seat reduces opening and closing torque and ensures drop tight closure. Resilient disc seal positively retained prevents seal roll out. Blue two pack epoxy coated Self lubricating shaft bearings reduce friction and operating torque. Standard ISO mounting flange suitable for most ranges of operators. Lockable disc option available. Close coupled worm and quadrant gearbox featuring adjustable open and closed position stops and disc position indicator. Anti-Flutter disc to shaft connections. Lifting points as standard. Hydraulic opening/gravity weight closing option available Butterfly valves are not designed for throttling but for fully open fully closed service. If temporary throttling is required please consult us.
Glenfield have designed and manufactured Free Discharge Valves since 1950. This valve was developed from extensive laboratory testing and field investigations. These tests confirmed that an odd number of ribs effectively dampen vibrations that are found in other fixed cone designs. The valve body is designed to operate with minimum vibration over its full range of opening. The valve body uses multiple, specially shaped ribs leading to the downstream cone. The outlet cone ensures that discharge is in the form of a hollow expanding jet, which is ideal for energy dissipation as the water is spread over a rapidly increasing surface area, thus permitting effective atmospheric cushioning. If containment of the jet is desired, a hood can be installed. The valve is manufactured from Ductile Iron, the sleeve is Stainless Steel and uses resilient downstream and upstream seals to ensure a drop-tight shutoff. Operation is via twin screws, gearboxes, intermediate rods and double bevel input gearbox. Actuating gear may be manually or electrically operated. A one piece cast unit is important for this valve type, in order to minimise vibrations and provide maximum discharge. Fabricated/welded types require many welds along full length of ribs, connections to cone, flanges, bosses etc. This welding in some cases is also detrimental to the core material. Also streamlined aerodynamic rib shape and liberal radii are not possible with a fabricated/welded valve.
Where : Q = Maximum valve discharge (m3/s) C = Coefficient of discharge with the valve full open (0.83) g = Acceleration due to gravity (9.81m/s2) H = Net head (m) A = Area of the valve based on the nominal valve diameter (m2)
Sizing : The size of the valve is determined by the net head at the valve. Net head is measured from the minimum upstream water surface to the center line of the valve, less any friction losses from the conduit. Typical MAX. velocities are 10 - 15 m/s Refer to the selection chart above.
10
857 0400 1101000 857 0450 1101000 857 0600 1101000 857 0700 1101000 857 0800 1101000 857 0900 1101000 857 1000 1101000 857 1200 1101000 857 1400 1101000 857 1500 1101000 857 1600 1101000 857 1800 1101000 857 1900 1101000
11
FEATURES
Cast Construction Terminal Siting Stilling Sump Resilient Seal External Mechanism Submerged Discharge Ported Body Cylindrical Sleeve Rising Screw Fine Screw Thread Slotted Ports
BENEFITS
Minimum Vibration No Building Compactness Droptight Shut Off Simple Maintenance Safe, Quiet, Cavitation Free Performance Near Linear Flow Low Operating Effort Visual Indication / Maintenance friendly Smooth Flow Transition Eliminates nozzle clogging
12
Where : Q = Maximum valve discharge (m3/sec) H = Maximum total head of water (m) d = Approximate depth of submergence (m) S = Side length of sump = 1.8 Q where Q is in (m3/sec)
13
Dimensions (mm)
Ref Nos DN (Inlet) DN (Outlet) Min Height (m) 1.60 1.36 2.06 1.70 2.30 2.46 2.46 3.86 3.07 4.52 3.45 5.76 7.09 Approx Weight (Kg) 1300 1500 2500 2500 3000 5000 5000 7000 7500 12500 12500 20000 21000 Discharge Capacity l/sec 450 450 750 750 950 1700 1700 3000 3000 4750 4750 9250 12000 856-0300-11101000 300 250 856-0300-01101000 300 300 856-0400-11101000 400 300 856-0400-01111000 400 400 856-0450-11111000 450 400 856-0600-21111000 600 450 856-0600-01111000 600 600 856-0800-11111000 800 600 856-0800-01111000 800 800 856-1000-21111000 1000 800 856-1000-01121000 1000 1000 856-1400-11121000 1400 1200 856-1600-21121000 1600 1200 NOTE: Other sizes may be available upon request.
Specifications
Standard Specifications: 14
Large Diameter Gate Valves Series 54
DN 700-1800 PN 10/16 rated Metal seated Gate Valve Generally in accordance with BS 5150 In ductile iron construction with bronze Stainless steel inside non rising screw (outside rising screw up to DN1200) PTFE impregnated packed stuffing box stem seal Cap top, handwheel, bevel / spur gearbox, powered actuator Close clockwise as standard Suitable for working pressures up to 10/16 bar Seat tested to 11/17.6 bar and shell tested to 15/24 bar Flanges to BS EN 1092-PN16 as standard Coated internally and externally with blue epoxy polyester resin, WRAS appoved. Note Valves of this size will require gearbox or actuation Datasheet Ref (www.glenfield.co.uk)
References List
15
Continental Europe, Russia, South Eastern Europe: AVK International A/S - Denmark - www.avkvalves.com Tel +45 8754 2100 Fax+45 8754 2120 AVK Sales Companies Europe: AVK Norge - Norway - www.avk.no AVK Mittelmann - Germany - www.avkmittelmann.com AVK Nederland - Netherlands - wwwavknederland.nl AVK Belgium - Belgium - dj@avkvalves.be AVK Armadan - Poland - www.avk.com.pl AVK France - France - avk@avk.fr AVK Valvulas - Spain - avk@avkvalvulas.com UK and Ireland: AVK UK - England - www.avkuk.co.uk Tel +44 1604 601188 Fax +44 1604 604818 M.&G. Ltd - Ireland - gerry@mandg.ie www.mandg.ie Tel +353 1451 1144 Fax +353 1451 1376 North America: American AVK Co. - 2155 Meridian Blvd., Minden, NV 89423, U.S.A. Tel +1 559 452 4310 Fax +1 559 452 4349 Email: sales@americanavk.com Web: www.americanavk.com Latin America and Caribbean: AVK Overseas - Latin America administration@avkoverseas.com Tel +1 559 451 0435 Fax +1 559 451 0437 Brazil: AVK Valvulas do Brasil Ltda. andre.alves@avkvalves.com.br Tel +55 15 3411 5145 South Africa: AVK Valves Southern Africa (Pty) Ltd. South Africa - avkvalves@mweb.co.za Tel +27 44 4951 626 Fax +27 44 4951 310/459 Australia: AVK Australia Pty Ltd - 559A Grand Junction Road, AUS-Wingfield, S.A. 5013, Australia Tel +61 8 8368 0900 Fax +61 8 8368 0970 Email: info@avkvalves.com.au Web: www.avkvalves.com.au
The Middle East: AVK Middle East - www.avk.ae P Box 293870, Dubai, U.A.E. .O. Tel +971 4299 8110 Fax +971 4299 8113 Saudi Valves Manufacturing Co. Ltd. Saudi Arabia - www.avk.com.sa Tel +971 2637 1570 Fax +971 2637 9380 Dutco Tennant United Arab Emirates - www.dutcotennant.com Dubai: Tel +971 4222 0186 Fax +971 4223 6193 Abu Dhabi: Tel +971 2634 8495 Fax +971 2551 5904 Al Ain: Tel +971 3721 9774 Fax +971 3721 9776 Arabi Company W.L.L. - Kuwait - opd@arabigroup.com Tel +965 472 4058 Fax +965 472 4059 Al Obeidly & Gulf Eternit Trading Co. Doha - Qatar obeidly@qatar.net.qa Tel +974 469 4111 Fax +974 469 4449 Asia: AVK Malaysia Sdn. Bhd Tel +603 329 16 004 Fax +603 329 17 067 Web: www.avkvalves.com.my AVK Vietnam 6th Floor, 14 Nguyen Van Hgoc, Ba Dinh District, Hanoi, Vietnam Tel: +84 4 766 6929 Fax: +84 4 766 6928 Email: avk_av@hn.vnn.vn Web: www.avkvalves.com.my AVK Phillipines Email: sales@avk.ph Web: www.avkvalves.com.my Malaysia & Brunei: Satria Damai Sdh Malaysia/Brunei - satriadm@tm.net.my Tel +603 7806 1415 Fax +603 7806 1412 China and Hong Kong: AVK Valves - China - info@avkchina.com Tel +86 21 5308 7733 Fax +86 21 5308 9989 China/Hong Kong Tel +852 2773 0846 Fax +86 2773 1164 Mr. Cao Yuzhu - Unit 1601, Tower No.5, Wanda Plaza, 93 Jiangou Road, Chaoyang District, Beijing, 100022, P .R.China Email:cao.cyz@avkchina.com Tel: +86 10 5820 5669 Web: www.avkchina.com Fax: +86 10 5960 3072 Advance Trading & Eng Ltd. Tel +852 2429 9808 Fax +852 2429 2921