Documentos de Académico
Documentos de Profesional
Documentos de Cultura
http://support.microsoft.com/kb/299357
Support for Windows Vista without any service packs installed ended on April 13, 2010. To continue receiving security updates for Windows, make sure you're running Windows Vista with Service Pack 2 (SP2). For more information, refer to this Microsoft web page: Support is ending for some versions of Windows (http://windows.microsoft.com/en-us/windows/help/end-support-windows-xp-sp2-windowsvista-without-service-packs) Introduction
One of the components of the Internet connection on your computer is a built-in set of instructions called TCP/IP. TCP/IP can sometimes become damaged or corrupted. If you cannot connect to the Internet and you have tried all other methods to resolve the problem, TCP/IP might be causing it. Because TCP/IP is a core component of Windows, you cannot remove it. However, you can reset TCP/IP to its original state by using the NetShell utility (netsh). This article describes two ways to reset TCP/IP. You must be logged on to the computer as an administrator. The first method uses a Fix it automated solution to reset TCP/IP. This method is designed for beginning to intermediate users. The second method describes how to use a command to reset TCP/IP manually. This method is designed for advanced users. To have us fix this problem for you, go to the Fix it for me section. If youd rather fix this problem yourself, go to the Let me fix it myself section.
Fix it for me
To fix this problem automatically, click the Fix this problem link. Then click Run in the File Download dialog box, and follow the steps in this wizard.
Fix this problem Microsoft Fix it 50199 Note this wizard may be in English only; however, the automatic fix also works for other language versions of Windows. Note If you are not on the computer that has the problem, you can save the automatic fix to a flash drive or to a CD, and then you can run it on the computer that has the problem. Now go to the "Did this fix the problem?" section.
Let me fix it myself
1 of 4
6/6/2011 12:41 PM
http://support.microsoft.com/kb/299357
manually: 1. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER: cmd 2. At the command prompt, copy and paste (or type) the following command and then press ENTER: netsh int ip reset c:\resetlog.txt Note If you do not want to specify a directory path for the log file, use the following command: netsh int ip reset resetlog.txt 3. Reboot the computer. When you run the reset command, it rewrites two registry keys that are used by TCP/IP. This has the same result as removing and reinstalling the protocol. The reset command rewrites the following two registry keys:
To run the manual command successfully, you must specify a file name for the log, in which the actions that netsh takes will be recorded. When you run the manual command, TCP/IP is reset and the actions that were taken are recorded in the log file, known as resetlog.txt in this article. The first example, c:\resetlog.txt, creates a path where the log will reside. The second example, resetlog.txt, creates the log file in the current directory. In either case, if the specified log file already exists, the new log will be appended to the end of the existing file.
More Information
Knowledge Base:
For more information, click the following article number to view the article in the Microsoft 314067 (http://support.microsoft.com/kb/314067/ ) How to troubleshoot TCP/IP connectivity with
Windows XP For more information, click the following article number to view the article in the Microsoft Knowledge Base: 811259 (http://support.microsoft.com/kb/811259/ ) How to determine and recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista
REFERENCES
For more information, click the following article number to view the article in the Microsoft 314053 (http://support.microsoft.com/kb/314053/ ) TCP/IP and NBT configuration parameters for
2 of 4
6/6/2011 12:41 PM
http://support.microsoft.com/kb/299357
Check whether the problem is fixed. If the problem is fixed, you are finished with this article. If the problem is not fixed, you can contact support (http://support.microsoft.com/contactus) .
APPLIES TO
3 of 4
6/6/2011 12:41 PM
http://support.microsoft.com/kb/299357
Microsoft Support
2011 Microsoft
4 of 4
6/6/2011 12:41 PM