Conforms to ISI/IGBC & GRIHA Specifications
LUXOL
QD 1K EPOXY PRIMER
Product Description
Luxol QD 1k Epoxy Primer is a one-pack, ready to use, quick drying. primer
formulated with special epoxy-based resin to get good anti-corrosive epoxy
property, The primer is used on metal surfaces. It is easy to apply and sand,
provides excellent adhesion to a variety of substrates, After using this prime.
Recommended Use
Both interior and exterior surfaces of mild steel, wood and concrete,
ColourRange MM Finish JM Toxicity
VERY HIGH yencuny,
aa 5a
iQ:
Product wT MEDIUM aM
Attributes att _)w 500 #20 gms.
Grey Mat
xray na)
Excellent bs
Adhesion »
2.1030 60° Hon alas pate Approx. 50 sft on sooth
ven eased at 300 meron DFT rete eo. too abet
applied by Box coater
Quick
Drying
“@,
ate
Brushing 30° C Ford Cup 84 Brush / Spray
_ oO
pa ‘SD: 20min @ 28 30° C & 60#/- SRH Approx. 25* C (Abel Closed Cup)
corrosive
Pron iar) eras’
Q )
68s Smooth, uniform, fre flowing,
(depending upon ambient temperature) 90 #10 Sec. at 30" C Ford Cup 84
aLUXOL
QD 1K EPOXY PRIMER
Surface Preparation
For fresh/new surfaces:
Betore panting, the surface must be made free of rust, drt oil and grease
‘ove, grease and ather contaminants by using Berger Thinner 800.
For Previously Painted Surfaces:
‘Serapings Strip all the old paint and remove all loose particles. Prepare the
surface by scrubbing with
wire brush or Sandpaper No. 150/180 to ensure the surfaces clean and
smooth, Make sure the
surfaces fully clean and dry
@
ections for Application
‘Thinning ofthis epoxy primer is not recommended. However, depending on conditions,
itcanbe tinned up to maximum of 5-796 wth Serge Thinner F63,
‘Apply the 1st coat Sand the primed surface
fof primer and with Sandpaper No. 100
allow it to dry for 120 and wipe clean before
6 -Bhours, the application of 2nd coat
Then the surface should be
‘Apply the 2nd dry cut with Sand Emery
coat of primer Paper No. 320 followed by
600.
‘Then follow it up
with the application
of topcoat of
enamel paint
Fire Hazard Class
Flammable
OoOG
Storage
Store in a cool dry place.
Keep away from source of ignition.
Keep container tightly closed, out of children’s reach and away from foodstuft,
Disposal
Do not pour leftover paint down the drain or any wat
Dispose in accordance with local regulation,
Safety & Precaution
Shelf Life Ensure good ventilation during application and dying of paint.
18 Months Wear protective clothes and gloves.
Smoking is prohibited while painting
{Avoid inhaling the vapour. Wear suitable dust nose pad when rubbing the surface,
\Wear eye protector during application In case of contact with eyes, rinse immedia
plenty of water.
with
Version No: BPP2/6/2020. Please note that this data sheet supersedes all previous versions
ites SME)
oo eu ea
Doe ate esta aoe eect a