Teapernture control accuracy: @.1* ¢
19200 Tesperature controller instruction sania]
Teaperatute ccetrol rang: 55° C120" €
Display edlor! red blur
Norcing porer seply: DCi2v Oc 24V ACHOV"Z.0y
Sensor: MIE 106 1 avter (with prot)
Produt Size: 19241 SeX28, a
ole Size: 72. lsaX39. 200
Product weight: 524 (12/20 899 (1107209
(peration and cisplay panel,
verimaene of [5] ore —}-« outpstindeator
savwwon a] LE Sestig temperate
meoceme 15) "LCE | 2sesrmier
Code Function Set range Default
Po Heato01 we c
a Buchash reser ore
Sel vapor sit =s8e1200 1208
Set lower Lisit -ss*1200 ioe
pi | Galiteation joc"Ioe oc.
5 | detayed start o-i0nin °
p6_| Alar teaperatre 55071200 v9
S Date Tose wore ome
pa | Factory reat vor oF
Varning code
ote [_Reason for enor Solution
Teaperatore exceeds |The tenperature drope below the alarm
ra
‘lars teoperature | tenperatire and returns to moral.
un | No seworranere | peptacesent recotnect teeprraire set
senor detected
Operation guide
1. Short press "SET sosll digital ube to flash, press “A” or
U" to-set the target temperature, press “Standby” button oF 10
2. Press and told “SET” to enter the code setting nod, press “A” cr
“V" to-rltch the code. After selecting, press “SET” to enter the
cede setting. After setting, press *Standly" Yatton or 20 operation to
save the setting within 3 seconde
3. The last puratter setting x caved by dofault after sutdom
4, restore the factory settings: press and hold “SET” to power n-
5, Then the salute is pwered on, 1 al start directly. After pomer-n,
press and hold the “‘standy” butter, the sodule will enter “sleep” or
“rate up" : in ease of poner failure, the oodule will rus autestically
after poner recover. ne need to start sana,
**The vorking power supply voltage mist be comected
according to the standard voltage of the label,
otherwise the module will be damaged easily.