Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Instruction Manual
● Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a
safe place for future reference.
● The application software and instruction manual PDF file are stored on
the internal memory of the camera.
● We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
● In the interest of continually improving products, Olympus reserves the
right to update or modify information contained in this manual.
● The screen and camera illustrations shown in this manual were produced
during the development stages and may differ from the actual product.
Unless otherwise specified, the explanation about these illustrations is
provided for STYLUS TOUGH-8010/μ TOUGH-8010.
Step 1
Checking the contents of the box
or
LI-50B*1 LI-42B*2
Strap Lithium Ion Battery
*1
STYLUS TOUGH-8010/μ TOUGH-8010 and
STYLUS TOUGH-6020/μ TOUGH-6020
*2
STYLUS TOUGH-3000/μ TOUGH-3000
or
Digital camera
Step 2 Step 3
Preparing the Camera Shooting and Playing Back Images
“Preparing the Camera” (p. 11) “Shooting, Playback, and Erasing” (p. 16)
Step 4 Step 5
How to Use the Camera Printing
“Camera Settings” (p. 3) “Direct printing (PictBridge)” (p. 53)
“Print Reservations (DPOF)” (p. 56)
Contents
¾ Names of Parts .............................. 7 ¾ Menus for Playback, Editing, and
Printing Functions ....................... 38
¾ Preparing the Camera ................. 11
¾ Menus for Other Camera
¾ Shooting, Playback, and Settings ........................................ 44
Erasing ......................................... 16
¾ Printing ......................................... 53
¾ Using Shooting Modes................ 23
¾ Usage Tips ................................... 58
¾ Using Shooting Functions .......... 28
¾ Appendix ...................................... 63
¾ Menus for Shooting Functions ... 33
2 EN
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Operation guide
The symbols FGHI displayed for image selections
and settings indicate that the arrow pad is to be used.
X 4/30
Y M D TIME
NORM 14M
2010 . 02 . 26 12 : 30 Y/M/D FILE 100 0004
’10/02/26 12:30
PRINT OK
CANCEL MENU SET OK SINGLE PRINT MORE
Arrow pad
F (up) /
INFO button (changing
information display) (p. 18, 21)
G (down) /
D button (erase) (p. 20)
Movie record button (p. 17) Operation guides displayed at the bottom of the screen
indicate that the m button, A button, or zoom
buttons can be used.
1
IMAGE SIZE 14M
COMPRESSION NORMAL
q button (switching
2
SET OK
EN 3
Using the Menu
Use the menu to change camera settings such as the shooting mode.
Press the m button to display the function menu. The function menu can be used to set frequently
used shooting and playback functions such as shooting mode.
o [SETUP] SETUP
4 14M
menu
To select the shooting mode Use FG to select a menu and press
Use HI to select the shooting mode and the A button.
press the A button.
To select the function menu
Use FG to select a menu and use HI to In the [SETUP] menu, various camera functions can be set,
select a menu option. Press the A button to
including shooting and playback functions not displayed in the
set the function menu.
function menu, and other settings such as date, time and screen
display.
1 Select [SETUP] and then press the A 4 Use FG to select the desired submenu 2
button. and then press the A button.
● The [SETUP] menu is displayed. ● Once a setting is selected, the display returns
to the previous screen.
1
IMAGE SIZE 14M
2 COMPRESSION NORMAL There may be additional operations.
SHADOW ADJUST AUTO
AF MODE FACE/iESP
“Menu Settings” (p. 33 to 52)
1 ESP/ ESP
1 X --.--.-- --:--
2 FINE ZOOM OFF
3 DIGITAL ZOOM OFF
2 WORLD TIME x
TV OUT
EXIT MENU SET OK
POWER SAVE ON
2
1
to select the desired page tab and press I. EXIT MENU SET OK
Page tab Submenu 1
3 3
following message is displayed after
EXIT MENU SET OK EXIT MENU SET OK setting.
3
1
IMAGE SIZE 14M
Use FG to select the desired submenu 1 2 COMPRESSION NORMAL
3 3
4 EN
Menu Index
Menus for Shooting Functions
PROGRAM AUTO P 1
9 1
IMAGE SIZE 14M
2 COMPRESSION 1 NORMAL
2
R OFF
3 SHADOW ADJUST AUTO
2 IMAGE STABILIZER ON
4 AF MODE FACE/iESP
REC VIEW
1 IMAGE SIZE
ON
VGA
1 ESP/ ESP 2 IMAGE QUALITY NORMAL
0.0 5 PIC ORIENTATION ON
IS MOVIE MODE OFF
2 FINE ZOOM OFF
WB
AUTO 6 3 DIGITAL ZOOM
1 ICON GUIDE
OFF R
ON
ON
ISO 2 REMOTE FLASH ON
AUTO 7 EXIT MENU 3
SET OK 1
8 EXIT MENU
2
SET OK
4 14M 3
EDIT 6 3
SETUP
EN 5
Menus for Other Camera Settings
1 r (Settings 1) SOUND SETTINGS ..........p. 46
1 INTERNAL/SD AUTO
INTERNAL/SD...................p. 44 FILE NAME .......................p. 46
2 MEMORY FORMAT
MEMORY FORMAT/ PIXEL MAPPING ...............p. 47
DATA REPAIR FORMAT............................p. 44 s (Monitor) .....................p. 47
COPY DATA REPAIR ...................p. 44 3 t (Settings 3)
1 1 ENGLISH u COPY.....................p. 44 X (Date/time) ..................p. 47
2 2 RESET l (Language) ................p. 44 WORLD TIME....................p. 48
3 3 USB CONNECTION PC RESET...............................p. 45 TV OUT .............................p. 48
USB CONNECTION ..........p. 45 POWER SAVE...................p. 50
EXIT MENU SET OK
2 s (Settings 2) MANOMETER*1 ................. p.50
q POWER ON ................p. 45 TAP CONTROL*2 ............... p.51
SAVE SETTINGS ..............p. 45 LED ILLUMINATOR*2......... p.52
PW ON SETUP .................p. 45
*1
STYLUS TOUGH-8010/μ TOUGH-8010 only
*2
STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only
6 EN
Names of Parts
Camera unit
3 6
1
2 7
8
4
5
9
10
STYLUS TOUGH-6020/ STYLUS TOUGH-3000/
μ TOUGH-6020 μ TOUGH-3000
1 1
11
*1
STYLUS TOUGH-8010/μ TOUGH-8010 only
*2
STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only
*3
STYLUS TOUGH-3000/μ TOUGH-3000
EN 7
1 7
2
9
3
4 10
5 11
12
6 13
14
*1
STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020
1 2 3
26 P
25 4
24 5
23 6
22 960hPa P
0.0 7
21 0m
WB
AUTO 8
ISO
AUTO 9
20 00:34 10
19 4 14M NORM 11
18 17 16 15 14 13 12
1/100 F3.9
28 27
*1
STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only
*2
STYLUS TOUGH-8010/μ TOUGH-8010 only
EN 9
Playback mode display
● Standard display
1 2 3 4 5 6 1
10 4/30
00:12/00:34 6
’10/02/26 12:30 17
Still image Movie
● Advanced display
1 2 3 4 5 6 8 9 10 11
10 4/30
24 7 22 1/1000 F3.9 2.0
ISO WB
23
960hPa
0m
21
20
P AUTO AUTO 12
13
1/1000 F3.9 2.0
ISO WB
19 NORM 14M 14
P AUTO AUTO 18 15
NORM 14M FILE 100 0004 16
FILE 100 0004
’10/02/26 12:30
’10/02/26 12:30 17
*
STYLUS TOUGH-8010/μ TOUGH-8010 only
10 EN
Preparing the Camera
3 LOCK knob 2
2 3 2
2 1 1
2
Slide the battery lock knob in the direction
of the arrow to unlock, and then remove the
STYLUS TOUGH-8010/μ TOUGH-8010 battery.
When removing the battery or card, be sure
to turn off the camera before opening or
closing the battery/card/connector cover.
Battery lock knob When using the camera, be sure to close
the battery/card/connector cover.
EN 11
1 Connect the camera to the Do not insert SD/SDHC memory cards
before the camera setup.
computer.
Do not format the internal memory until the
When connecting the camera to the
camera setup is complete. Doing so will
computer via USB cable, face the lens
erase the camera instruction manual and
downward.
the PC software (ib) data that are stored on
Indicator lamp the internal memory.
Check that your computer meets the
following system requirements:
Windows XP (SP2 or later)/
Windows Vista/Windows 7
Refer to the PC software (ib) help guide for
Multi-connector details on how to use the PC software (ib).
● When charging, the indicator lamp light. When ● Computers without a factory-installed OS and
charging is complete, the indicator lamp will turn home-built computers
off. Double-click the icon for the camera drive
If the indicator lamp does not light, the (Removable Disk), and then execute
camera may be incorrectly connected, or Setup. exe to start the camera setup.
3
the battery, camera, computer or USB cable
may not be functioning correctly. Follow the instructions on the
computer screen and setup the
Camera setup
camera.
Set the camera date and time, time zone
and display language automatically; install
the camera instruction manual and PC
software (ib).
12 EN
Charging the battery with the 2
included USB-AC adapter STYLUS TOUGH-8010/μ TOUGH-8010
Indicator lamp
The included USB-AC adapter (F-2AC)
On: Charging
(hereafter referred as AC adapter) has
Off: Charged
been designed to be used for charging
and playback. Make sure that shooting
is not being used while the AC adapter is
connected to the camera. STYLUS TOUGH-6020/μ TOUGH-6020
Indicator lamp
Example: AC adapter with an AC cable On: Charging
Off: Charged
1
Multi-connector
STYLUS TOUGH-3000/μ TOUGH-3000
Indicator lamp
On: Charging
Off: Charged
2
BATTERY EMPTY
4 14M
Monitor top left Error message
EN 13
When not using a computer 3 Press I to save the setting for [Y].
See the next section under “Setting the date,
time and time zone.”
X
’10.02.26 12:30
CANCEL MENU
X SUMMER SET OK
Y M D TIME
The menus can be used to change the
selected time zone. [WORLD TIME] (p. 48)
2010 . -- . -- -- : -- Y/M/D
CANCEL MENU
14 EN
Changing the display language 1 Write-protect switch
The language for the menu and error messages Contact area
displayed on the monitor is adjustable.
2
1 ENGLISH
2 RESET
3 USB CONNECTION PC STYLUS TOUGH-8010/ STYLUS TOUGH-6020/
EXIT MENU SET OK μ TOUGH-8010 μ TOUGH-6020
STYLUS TOUGH-3000/
μ TOUGH-3000
3 Use FG to select [l] and press 1 1
the A button.
EN 15
Shooting, Playback, and Erasing
Shooting with the optimum 2 Hold the camera and compose the
aperture value and shutter shot.
speed (P mode)
In this mode, automatic shooting settings are Monitor
activated while also allowing changes to a wide
range of other shooting menu functions, such
as exposure compensation, white balance, etc.
as needed.
Horizontal grip
P
Vertical grip
0.0
WB
AUTO
When holding the camera, take care not to
ISO
AUTO
cover the flash with your fingers, etc.
00:34
4 14M 3 Press the shutter button halfway
Number of storable still pictures (p. 66, 67, 68) down to focus on the subject.
Monitor
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
(standby mode screen)
value are displayed), and the AF target mark
changes to green.
If P mode is not displayed, press the m
button to display the function menu screen ● The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
and then set the shooting mode to P. “Using
the Menu” (p. 4)
AF target mark
Current shooting mode display
P
PROGRAM AUTO P
16 EN
4 To take the picture, gently press 2 Press the movie record button
the shutter button all the way down again to stop recording.
while being careful not to shake the Sound will also be recorded.
camera. When recording sound in a movie, the
sound of the lens triggering and camera
P operating may be recorded.
STYLUS TOUGH-3000/μ TOUGH-3000:
During sound recording, only the digital
zoom can be used. To record a movie with
optical zoom, set [R] (movies) (p. 36) to
Press fully
[OFF].
1/400 F3.9
Image review screen Using the zoom
To view images during shooting Pressing the zoom buttons adjusts the shooting
Pressing the q button enables playback of range.
images. To return to shooting, either press
Pressing the wide Pressing the telephoto
the q button or press the shutter button
(W) button (T) button
halfway down.
Shooting movies
Zoom bar
start recording.
0.0 0.0
WB WB
Continuous recording length AUTO
ISO
AUTO
AUTO
ISO
AUTO
(p. 66, 67, 68) 00:34 00:34
4 14M 4 14M
EN 17
To take larger images Reading a histogram
[DIGITAL ZOOM] (p. 35)
If the peak fills too much of the frame,
The zoom bar appearance identifies the the image will appear mostly white.
status of the fine zoom/digital zoom.
If the peak fills too
When using much of the frame,
optical zoom the image will
appear mostly black.
Optical zoom range The green section shows
luminance distribution
When using within the screen’s center.
fine zoom
Fine zoom
range Viewing images
When using
digital zoom
1 Press the q button.
Digital zoom
range Number of frames/
Total number of images
4/30
Changing the shooting
information display
The display of the screen information can
be changed to best match the situation, for
example, the need for a clear view of the screen
or for making a precise composition by using the ’10/02/26 12:30
grid display.
Playback image
1 Press F (INFO).
● The displayed shooting information changes in 2 Use HI to select an image.
the order shown below each time the button is
pressed. “Shooting mode display” (p. 9)
Displays
Displays
Normal previous
next image
P image
0.0
WB
AUTO No information Hold I to fast forward and hold H to
ISO
00:34
AUTO
reverse.
4 14M
The display size of the images can be
changed. “Index view, close-up view, and
Detailed event index” (p. 20)
P
0.0
WB
AUTO
ISO
AUTO
00:34
4 14M NORM
18 EN
To play sound recordings Press the A button to pause
Pausing and
To play sound recorded with an image, restarting
playback. During pause, fast
select the image and press the A button. A playback
forward or reverse, press the
! icon appears on images with which sound A button to restart playback.
has been recorded. Press I to fast forward. Press
[R] (still images) (p. 35, 43) Fast forward I again to increase the fast
forward speed.
Press H to rewind. The speed
at which the recording rewinds
Rewind
increases each time H is
pressed.
Adjusting the Use FG to adjust the
volume volume.
4/30
00:14/00:34
During pause
EN 19
Erasing images during Index view, close-up view, and
playback (Single image erase) event index
Index view enables quick selection of a desired
1 Display the image you want to erase image. Close-up view (up to 10× magnification)
and press G (D). allows checking of image details. In event
index*1, images are grouped by the shooting
dates and representative images for an event
ERASE
can be displayed.
*1
Pictures with different dates can be grouped into the
same event using the PC software (ib).
ALL ERASE
1
SEL. IMAGE
ERASE Press the zoom buttons.
CANCEL
W T
Index view
’10/02/26
W T
’10/02/26
2 4
W T
Event index
’10/02/26
20 EN
To select an image in index view Playing back panorama
Use FGHI to select an image, and press images
the A button to display the selected image
in single-image view. Panorama images that were combined together
using [AUTO] or [MANUAL] can be scrolled for
To scroll an image in close-up view viewing.
Use FGHI to move the viewing area. “Creating panoramic images (p mode)”
(p. 25)
To select an image in event index
Use HI to select the representative image 1 Select a panorama image during
and press the A button. The images in the playback.
selected event are played back.
“Viewing images” (p. 18)
information display
Shooting information settings displayed on the
screen can be changed.
1 Press F (INFO).
REPLAY OK ’10/02/26 12:30
● The displayed image information changes in
the order shown below each time the button is
pressed.
2 Press the A button.
Normal
10 4/30
No information
’10/02/26 12:30
Detailed
10 4/30
Current viewing area
960hPa
0m
1/1000 F3.9 2.0
P ISO WB
AUTO AUTO
To control panorama image playback
NORM 14M
FILE 100 0004
Zoom in/Zoom out: Press the A button to
’10/02/26 12:30 pause playback. Then press the zoom button
to enlarge/shrink the image.
“Reading a histogram” (p. 18)
Playback direction: Press the A button
to pause playback. Then press FGHI
to scroll the image in the direction of the
pressed button.
Pause: Press the A button.
Restart scrolling: Press the A button.
Stop playback: Press the m button.
EN 21
Using the menu guide
If the E button is pressed while settings are
being adjusted in the playback function or
[SETUP] menus, a description of the selected
option is displayed.
“Using the Menu” (p. 4)
IN-CAMERA MANUAL
Search
Learn about the camera
History
Message
EXIT SET OK
Submenu 2 Application
Functions or operating methods
Search can be searched from a term or
shooting objective.
Information is shown about
Learn about the
recommended functions and basic
camera
operating methods for the camera.
Searches can be performed from
History
the search history.
Messages from the camera can
Message
be viewed.
IN-CAMERA MANUAL
Search
Learn about the camera
History
Message
EXIT SET OK
22 EN
Using Shooting Modes
To change the shooting mode Using the best mode for the
The shooting mode (P, M, s, P, shooting scene (s mode)
p, Q) can be changed with using the
function menu.
“Using the Menu” (p. 4)
1 Set the shooting mode to s.
SCENE MODE
Shooting with automatic
settings (M mode)
The camera will automatically select the optimal 0.0
shooting mode for the scene. This is a fully WB
AUTO
automatic mode that allows you to take a picture
suited to the scene by simply pressing the 4 14M
shutter button. In M mode, settings in the
shooting menu can be selected, but the changed
setting is not reflected in the actual shot. 2 Press G to go to the submenu.
0.0
WB
AUTO
4 14M
EN 23
In s modes, the optimum shooting
settings are pre-programmed for specific
shooting scenes. For this reason, settings
may not be changed in some modes.
AF lock mark
Option Application AF LOCK
0.0
B PORTRAIT/F LANDSCAPE/ WB
AUTO
G NIGHT SCENE*1/
M NIGHT+PORTRAIT/ 4 14M
C SPORT/N INDOOR/ The camera
W CANDLE*1/ takes a picture To cancel, press the A button again to clear
R SELF PORTRAIT/ using the the AF lock mark.
S SUNSET*1/X FIREWORKS*1/ optimum settings
V CUISINE/d DOCUMENTS/ for the scene
To take pictures of a moving subject
q BEACH & SNOW/ conditions.
T SNAPSHOT/k WIDE1*2/ like a pet ([ PET] mode)
l WIDE2*2/H MACRO*2/ 1 Use HI to select [ PET], and press
PET/a SNOW*2 the A button to set.
*1
When the subject is dark, noise reduction is 2 Hold the camera to align the AF target
automatically activated. This approximately doubles mark on the subject and press the A
the shooting time during which no other pictures can button.
be taken.
*2
STYLUS TOUGH-8010/μ TOUGH-8010 and ● When the camera recognizes the subject,
STYLUS TOUGH-6020/μ TOUGH-6020 only the AF target mark automatically tracks the
subject movement to focus on it continuously.
“To focus on a moving subject continuously
To take underwater photos
(AF Tracking)” (p. 34).
Select [T SNAPSHOT], [k WIDE1]*1,
[l WIDE2]*1, 2, [H MACRO]*1.
*1
STYLUS TOUGH-8010/μ TOUGH-8010 and Shooting with special effects
STYLUS TOUGH-6020/μ TOUGH-6020 only (P mode)
*2
When set to [l WIDE2], the focus distance
is automatically fixed to approx. 5.0 m To add expression to your photo, select the
(16.4 ft.).
desired special effect.
“Important information about water and
shock resistant features” (p. 69) 1 Set the shooting mode to P.
To lock the focus distance for MAGIC FILTER
underwater shoots (AF lock)
When [T SNAPSHOT], [k WIDE1] , *
POP ART
0.0
WB
AUTO
24 EN
3 Use HI to select the desired effect 3 Use HI to select the desired mode
and then press the A button to set. and then press the A button to set.
Submenu 1 Application
Three frames are taken and
combined by the camera. The
user only composes the shots
AUTO
so that the target marks and
0.0 pointers overlap, and the camera
WB
AUTO automatically releases the shutter.
00:34
Three frames are taken and
4 14M
combined by the camera. The
Icon indicating P mode that MANUAL user composes the shots using
is set the guide frame and manually
releases the shutter.
Shooting mode Option The frames that were taken are
PC combined into a panorama image
[ POP ART
using the PC software (ib).
\ PIN HOLE
MAGIC FILTER
] FISH EYE
@ DRAWING For details on installing the PC software
(ib), see “Battery charge and camera setup”
In P mode, the optimum shooting (p. 11).
settings are pre-programmed for each When set to [AUTO] or [MANUAL], [IMAGE
scene effect. For this reason, some settings SIZE] (p. 33) is fixed to [2].
cannot be changed in some modes. The focus, exposure (p. 30), zoom position
(p. 17), and white balance (p. 30) are locked
Creating panoramic images at the first frame.
0.0
WB
AUTO
AUTO
EN 25
3 Move the camera slowly while keeping it 2 Press the shutter button to take the first
straight, and stop the camera where the frame.
pointer and target mark overlap.
Joint areas
● The camera releases the shutter
automatically.
MANUAL MANUAL
AUTO 1 2 1 2
1st frame
CANCEL MENU SAVE OK 3 Compose the next shot so that joint area
1 overlaps joint area 2.
To combine only two pictures, press the
A button before taking a third frame.
MANUAL
BACK MENU
26 EN
Taking pictures with [PC] Smoothing out skin tone and
1 Use FGHI to select the direction that texture (Q mode)
the frames are combined.
The camera identifies a person’s face and gives
2 Press the shutter button to take the first the skin a smooth, translucent look for taking
frame, and then compose the second the picture.
shot.
Before first
1 Set the shooting mode to Q.
shot
PC BEAUTY P
1 2
0.0
WB
AUTO
BACK MENU
4 14M
● After the first shot, the area shown in white The frame may not appear or may take
reappears on the side of the display opposite some time to appear for some subjects. In
the pan direction. Frame subsequent addition, this function may have no visible
photographs so that they overlap with the effect on some subjects.
image in the monitor.
The [IMAGE SIZE] of the retouched image
3 Repeat Step 2 until the number of is limited to [n] or lower.
desired frames is taken, and then press
the A button or m button when
finished.
Panorama shooting is possible for up to
10 frames.
Refer to the PC software (ib) help guide for
details on how to make panorama images.
EN 27
Using Shooting Functions
Option Description
The flash fires automatically in
FLASH AUTO
low-light or backlight conditions.
Pre-flashes are emitted to reduce
REDEYE the occurrence of red eye in your
photos.
The flash fires regardless of the
FILL IN
available light.
FLASH OFF The flash does not fire.
REMOTE
CONTROL* For details, see “Using an external
flash” (p. 37).
SLAVE
*
STYLUS TOUGH-8010/μ TOUGH-8010 only
[REMOTE CONTROL] and [SLAVE] are not
displayed when [REMOTE FLASH] (p. 37) is
set to [OFF].
28 EN
Option Application Description
Macro mode is
OFF ―
deactivated.
When the zoom is at the widest (W) position, this function enables
shooting as close as the following distances.
STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-3000/
STYLUS TOUGH-6020/μ TOUGH-6020 μ TOUGH-3000
This enables the
camera to shoot 20 cm (7.9 in.) 10 cm (3.9 in.)
MACRO
subjects at close When the zoom is at the most telephoto (T) position, this function
distances. enables shooting as close as the following distances.
STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-3000/
STYLUS TOUGH-6020/μ TOUGH-6020 μ TOUGH-3000
50 cm (19.7 in.) 30 cm (11.8 in.)
This function enables shooting as close as the following distances.
STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-3000/
STYLUS TOUGH-6020/μ TOUGH-6020 μ TOUGH-3000
This enables the 3 cm (1.2 in.) 2 cm (0.8 in.)
camera to shoot
SUPER MACRO*1 Subjects at the following or farther distances cannot be brought
subjects at even closer
distances. into focus.
STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-3000/
STYLUS TOUGH-6020/μ TOUGH-6020 μ TOUGH-3000
60 cm (23.6 in.) 50 cm (19.7 in.)
The LED illuminator
lights the area 7 to
20 cm (2.8 to 7.9 in.)
S-MACRO LED*2, 3 ―
from the lens, while
the shutter button is
pressed halfway down.
*1
The zoom is automatically fixed.
*2
ISO sensitivity (p. 31) is automatically fixed to [ISO AUTO].
*3
STYLUS TOUGH-8010/μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only
The flash (p. 28) and zoom (p. 17) cannot be set when [a SUPER MACRO] or [N S-MACRO LED]
is selected.
EN 29
Using the self-timer Adjusting the brightness
(Exposure compensation)
After the shutter button is pressed all the way
down, the picture is taken after a short delay. The standard brightness (appropriate exposure)
set by the camera based on the shooting mode
1 Select the self-timer option in the (except for M) can be adjusted brighter or
shooting function menu. darker to obtain a desired shot.
4 14M
0.3 0.0 0.3
WB
AUTO
0.0
WB
AUTO
ISO
AUTO
30 EN
2 Use HI to select the setting Selecting the ISO sensitivity
option, and press the A button to
Abbreviation for the International
set. Organization for Standardization. ISO
standards specify the sensitivity for digital
Option Description
cameras and film, thus codes such as “ISO
The camera automatically adjusts 100” are used to represent sensitivity.
WB AUTO the white balance according to the
shooting scene. In the ISO setting, although smaller values
result in less sensitivity, sharp images can
For shooting outdoors under a
5 be taken under fully lit conditions. Larger
clear sky.
values result in higher sensitivity, and
For shooting outdoors under a images can be taken at fast shutter speeds
3
cloudy sky. even under low light conditions. However,
For shooting under tungsten high sensitivity introduces noise into the
1
lighting. resulting picture, which may give it a grainy
For shooting under daylight appearance.
w fluorescent lighting (household
lighting, etc.) 1 Select the ISO setting option in the
For shooting under neutral shooting function menu.
x fluorescent lighting (desk lamps,
etc.)
For shooting under white
P
y
fluorescent lighting (offices, etc.)
For underwater shooting (this
O* setting is available when the s 0.0
mode is set to [k WIDE1]). WB
AUTO
EN 31
Sequential shooting (Drive) Using the LED illuminator
Pictures are taken sequentially while the shutter
(STYLUS TOUGH-8010/μ TOUGH-8010 and
button is held down.
STYLUS TOUGH-6020/μ TOUGH-6020 only)
1 Select the drive option in the In a dark location, the LED illuminator can
shooting function menu. be used as an auxiliary light to see things or
compose shots.
P
1 Set [LED ILLUMINATOR] (p. 52) to
[ON].
0.0
WB
AUTO
2 Press and hold F down until the
ISO
AUTO LED illuminator lights up.
SEQUENTIAL
● If you perform an operation when the LED
illuminator is on, it will illuminate up to approx. 90
seconds.
Option Description
One frame is shot each time the
o
shutter button is pressed.
Take sequential shots using the
j*1 focus, brightness (exposure) and LED
white balance set in the first frame. illuminator
The camera takes sequential shots
W
at a faster speed than in [j].
*1
The shooting speed varies depending on the The LED illuminator turns off if no operation
settings for [IMAGE SIZE/COMPRESSION] (p. 33). is performed for approx. 30 seconds.
When set to [j], the flash (p. 28) cannot Even when the camera’s power is turned
be set to [REDEYE]. In addition, when set to off, if F is pressed until the LED illuminator
[W] the flash is fixed to [FLASH OFF]. lights up, it lights for 30 seconds.
When set to [W], [IMAGE SIZE] is limited To turn the LED illuminator off
to [3] or lower, and the ISO sensitivity is
fixed to [ISO AUTO].
Press and hold F down, until the LED
illuminator turns off.
32 EN
For information on using the menus, see “Using the Menu” (p. 4).
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal
memory and SD/SDHC memory cards” (p. 66)
“Number of storable pictures (still images)/Continuous recording length (movies) in the internal
memory and SD/SDHC memory cards” (p. 66)
When [IMAGE SIZE] is set to [QVGA], [IMAGE QUALITY] is fixed to [FINE].
EN 33
Brightening the subject against To focus on a moving subject
backlight [SHADOW ADJUST] continuously (AF Tracking)
I (Shooting menu 1) X SHADOW ADJUST 1 Hold the camera to align the AF target
mark on the subject and press the
Available shooting modes: P M s P p A button.
Q
2 When the camera recognizes the subject,
the AF target mark automatically tracks
Submenu 2 Application the subject movement to focus on it
The shadow adjustment effect is continuously.
AUTO applied when shooting against 3 To cancel the tracking, press the
backlight. A button.
OFF The effect is not applied.
Depending on the subjects or the shooting
Shoot with automatic adjustment conditions, the camera may be unable to
ON to brighten an area that has lock the focus or fail to track the subject
become darker.
movement.
When set to [ON], [ESP/n] (p. 34) is When the camera fails to track the subject
automatically fixed to [ESP]. movement, the AF target mark changes to
red.
34 EN
For information on using the menus, see “Using the Menu” (p. 4).
Submenu 2 Application
OFF No sound is recorded.
The camera automatically starts
recording sound for approx.
ON 4 seconds after a picture is taken.
This is useful for recording notes
or comments about the picture.
EN 35
Recording sound when shooting Images may not be stabilized if camera
movies [R] shake is too severe.
A (Movie menu) X R When the shutter speed is extremely slow,
such as when taking pictures at night,
Available shooting modes: P M s P p [IMAGE STABILIZER] (still images) may not
be as effective.
Q
When shooting while the [IS MOVIE MODE]
(movies) is set to [ON], the image will be
Submenu 2 Application enlarged somewhat before saving.
OFF No sound is recorded.
ON Sound is recorded.
Viewing the image immediately after
shooting [REC VIEW]
When recording sound in a movie, the
sound of the lens triggering and camera J (Shooting menu 2) X REC VIEW
operating may be recorded.
Available shooting modes: P M s P p
STYLUS TOUGH-3000/μ TOUGH-3000:
When set to [ON], only the digital zoom can Q
be used during movie recording. To record
the movie with the optical zoom, set [R] Submenu 2 Application
(movies) to [OFF].
The image being recorded is not
displayed. This allows the user
Reducing the blur caused by the OFF to prepare for the next shot while
following the subject in the monitor
camera shake when shooting after shooting.
[IMAGE STABILIZER] (still images)/ The image being recorded is
[IS MOVIE MODE] (movies) displayed. This allows the user to
ON
make a brief check of the image
I (Shooting menu 1) X
that was just taken.
IMAGE STABILIZER (still images)/
A (Movie menu) X
IS MOVIE MODE (movies)
Submenu 2 Application
The image stabilizer is
deactivated. This is recommended
OFF for shooting when the camera is
fixed in place on a tripod or other
stable surface.
ON The image stabilizer is activated.
36 EN
For information on using the menus, see “Using the Menu” (p. 4).
Submenu 2 Application
OFF No icon guide is displayed.
The explanation of the selected
icon will be displayed when
a shooting mode or shooting
ON
function menu icon is selected
(position the cursor on the icon for
a while to display the explanation).
EN 37
Menus for Playback, Editing, and
Printing Functions
The default settings of the function are highlighted in .
Data must have been created with the PC software (ib) before using some function.
Refer to the PC software (ib) help guide for details on how to use the PC software (ib).
For details on installing the PC software (ib), see “Battery charge and camera setup” (p. 11).
Playing back pictures automatically Searching for images and playing back
[SLIDESHOW] the related images [PHOTO SURFING]
SLIDESHOW PHOTO SURFING
In [PHOTO SURFING], images can be
Submenu 1 Submenu 2 Application searched and related images can be played
Selects the content back by selecting the related items.
ALL/EVENT/
SLIDE to be included in the
COLLECTION To start [PHOTO SURFING]
slideshow.
OFF/Cosmic/ Press the A button to start
Breeze/ Selects the [PHOTO SURFING].
BGM Mellow/ background music When a related item of the image displayed
Dreamy/ options. is selected with FG, images related to the
Urban item are displayed in the lower part of the
STANDARD/
Selects the type of monitor. Use HI to display an image.
TYPE transition effect used To select the related items undisplayed,
FADE/ZOOM
between slides. press the A button when selecting an item.
START ― Starts the slideshow. To stop [PHOTO SURFING], press the
m button, or select [BACK] and press
Single-frame advance/rewind: the A button.
During a slideshow, press I to skip ahead BACK
Related items
35ºN
139ºE
38 EN
For information on using the menus, see “Using the Menu” (p. 4).
4/30
Using a PC software (ib) and importing
data back to the camera
The following functions can be performed
when data created with the PC software (ib)
is imported back to the camera.
EXIT MENU Refer to the PC software (ib) help guide for
PLAY OK ’10/02/26 12:30 details on how to use the PC software (ib).
[PHOTO SURFING]
Playing back images by Collection Information of persons or shooting locations
created with the PC software (ib) and new Collections can be added in the
[COLLECTION q] related items.
COLLECTION q [EVENT q]
In [COLLECTION q], the collection is Images can be played back by event created
played back that has been created with the with the PC software (ib).
PC software (ib) and imported back from a
computer. Event index (p. 20)
The representative images for an event
created with the PC software (ib) can be
displayed.
EN 39
Retouching the skin and eyes Changing the image size [Q]
[BEAUTY FIX] EDIT X Q
BEAUTY FIX
Submenu 2 Application
Depending on the picture, the editing may
This saves a high-resolution image
not be effective. C 640 × 480
as a separate image with a smaller
size for use in e-mail attachments
Submenu 1 Submenu 2 Application E 320 × 240 and other applications.
[CLEAR SKIN],
ALL ―
[SPARKLE EYE] and 1 Use HI to select an image.
[DRAMATIC EYE] are
2 Use FG to select an image size and
applied together.
press the A button.
Makes skin look
smooth and ● The resized image is saved as a separate
SOFT/AVG/ image.
CLEAR SKIN translucent. Select the
HARD
correction effect from
3 levels.
Cropping image [P]
Enhances the contrast
SPARKLE EYE ―
of the eyes. EDIT X P
DRAMATIC Enlarges the subject’s
― 1 Use HI to select an image, and press
EYE eyes.
the A button.
1 Use FG to select a correction item, and 2 Use the zoom buttons to select the size of
press the A button. the cropping frame, and use FGHI to
2 Use HI to select an image for move the frame.
retouching, and press the A button.
● The retouched image is saved as a separate
image.
40 EN
For information on using the menus, see “Using the Menu” (p. 4).
Changing the color tone of image 3 Use FG to select the Year of the
[COLOR EDIT] calendar, and press I.
EDIT X COLOR EDIT 4 Use FG to select the Month of the
calendar, and press the A button.
Submenu 2 Application ● The edited image is saved as a separate
image.
This changes the image to black
BLACK & WHITE
and white.
SEPIA
This changes the image to a Brightening areas that are dark
sepia tone. due to backlight or other reasons
HIGH This increases the color saturation [SHADOW ADJ]
SATURATION of the image.
EDIT X SHADOW ADJ
LOW This slightly increases the color
SATURATION saturation of the image. 1 Use HI to select an image, and press
the A button.
COLOR EDIT ● The edited image is saved as a separate
SEPIA image.
Depending on the picture, the editing may
not be effective.
The retouching process may lower the
image resolution.
EXIT MENU SET OK
Retouching red eyes in flash shooting
1 Use HI to select an image, and press [REDEYE FIX]
the A button.
EDIT X REDEYE FIX
2 Use HI to select the desired color, and
press the A button. 1 Use HI to select an image, and press
● The image with the selected color is saved as the A button.
a separate image. ● The edited image is saved as a separate
image.
CALENDAR
SET OK
EN 41
Erasing images [ERASE] 3 Repeat Step 2 to select the images to be
erased, and then press the m button
ERASE
to erase the selected images.
Submenu 1 Application 4 Use FG to select [YES], and press the
A button.
All images in the internal memory
ALL ERASE ● The images with a R mark are erased.
or card will be erased.
Images are individually selected
SEL. IMAGE To erase all images [ALL ERASE]
and erased.
ERASE/ 1 Use FG to select [ALL ERASE], and
Deletes the image displayed.
ERASE EVENT*1 press the A button.
CANCEL Cancels deletion of the image. 2 Use FG to select [YES], and press the
A button.
*1
If G is pressed when an event is played back, all
images in the event are erased.
When erasing pictures in the internal Saving print settings to the image data
memory, do not insert the card into the [PRINT ORDER]
camera. Or set [INTERNAL/SD] to [IN]. q (Playback menu) X PRINT ORDER
Before erasing pictures from a memory
card, insert the card into the camera “Print reservations (DPOF)” (p. 56)
and select [AUTO] for [INTERNAL/SD]. Print reservation can be set only for still
“Selecting a storage device [INTERNAL/ images that are recorded to the card. Set
SD]” (p. 44) [INTERNAL/SD] to [AUTO].
Protected images cannot be erased.
OK ERASE/CANCEL MENU
42 EN
For information on using the menus, see “Using the Menu” (p. 4).
Microphone
Microphone
Microphone
EN 43
Menus for Other Camera Settings
44 EN
For information on using the menus, see “Using the Menu” (p. 4).
Restoring the shooting functions to the Even if a computer has USB ports, proper
default settings [RESET] operation is not guaranteed in the following
cases:
r (Settings 1) X RESET
● Computers with USB ports installed using an
expansion card, etc.
Submenu 2 Application
● Computers without a factory-installed OS and
Restores the following menu
home-built computers
functions to the default settings.
• Flash (p. 28)
• Macro (p. 28) Turning on the camera with the q
• Self-timer (p. 30)
YES • Exposure compensation (p. 30) button [q POWER ON]
• White balance (p. 30) s (Settings 2) X q POWER ON
• ISO (p. 31)
• Drive (p. 32)
• Menu functions in [I, J, Submenu 2 Application
A] (p. 33 to 37) Pressing the q button turns on
The current settings will not be YES the camera and starts the camera
NO in the playback mode.
changed.
The camera is not turned on. To
NO turn on the camera, press the
n button.
Selecting a method for connecting
the camera to other devices
[USB CONNECTION]
Saving the mode when the camera is
r (Settings 1) X USB CONNECTION turned off [SAVE SETTINGS]
s (Settings 2) X SAVE SETTINGS
Submenu 2 Application
When the camera is connected
Submenu 2 Application
AUTO to another device, the settings
selection screen is displayed. The shooting mode is saved
Select when connecting the when the camera is turned off and
YES
STORAGE camera to a computer via a is reactivated the next time the
storage device. camera is turned on.
Select when connecting a camera The shooting mode is set to P
PC NO mode when the camera is turned
and computer.
on.
Select when connecting to a
PRINT
PictBridge-compatible printer.
EN 45
Selecting the camera sound and its volume [SOUND SETTINGS]
s (Settings 2) X SOUND SETTINGS
Month: 1 to C
(A=October,
Pmdd B=November,
C=December)
Day: 01 to 31
46 EN
For information on using the menus, see “Using the Menu” (p. 4).
Adjusting the CCD and the image Setting the date and time [X]
processing function [PIXEL MAPPING] t (Settings 3) X X
s (Settings 2) X PIXEL MAPPING
“Setting the date, time and time zone”
This function has already been adjusted (p. 14)
at factory shipping, and no adjustment is
needed right after purchase. Approximately To select the date display order
once a year is recommended. 1 Press I after setting Minute, and use
For best results, wait at least one minute FG to select the date display order.
after taking or viewing pictures before
performing pixel mapping. If the camera is X
turned off during pixel mapping, be sure to
perform it again. Y M D TIME
EN 47
Choosing home and alternate time zones [WORLD TIME]
t (Settings 3) X WORLD TIME
You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been
set using [X].
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
The factory default settings differ according to the region where the camera is sold.
48 EN
For information on using the menus, see “Using the Menu” (p. 4).
AV cable (supplied)
HDMI mini
connector
3 Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4 Turn on the camera, and use HI to select the image for playback.
Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector
on the TV.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable
will take priority.
Depending on the TV’s settings, the displayed images and information may become cropped.
EN 49
To operate images with the TV remote control
1 Set [HDMI CONTROL] to [ON], and turn off the camera.
2 Connect the camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 49)
3 First turn on the TV, and then turn on the camera.
● Operate by following the operation guide that is displayed on the TV.
With some TVs, operations cannot be performed with the TV remote control even though the
operation guide is displayed on the screen.
If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] and
operate using the camera.
Submenu 2 Application
OFF Cancels [POWER SAVE].
When the camera is not being used for approx. 10 seconds, the monitor automatically turns
ON
off to save battery power.
t (Settings 3) X MANOMETER
The readings may have a margin of error depending on meteorological conditions. Use the readings
only for your reference.
When set to [ON], a warning message appears in the monitor as a water depth close to 7 m (22.9 ft)
is reached.
50 EN
For information on using the menus, see “Using the Menu” (p. 4).
CALIBRATE
1200 m
Submenu 2 Application
OFF Cancels [TAP CONTROL].
ON [TAP CONTROL] is activated.
Adjusts the tap strength and intervals between multiple taps on each side of the camera
CALIBRATE
body. (top, left, right, & back)
Operating during shooting mode Tap the camera firmly using the pad of your
(Example: Flash mode) finger.
1 Tap the right or left side of the camera When the camera is stabilized on a tripod
body once. Then tap the top side of the for example, tap control may not work
camera once. properly.
● The flash mode selection screen is displayed. To prevent dropping the camera when using
tap control, strap the camera to your wrist.
2 Tap the right or left side of the camera
body to select a function. Operating during playback mode
3 Tap the back of the camera body twice to When switched to playback mode by tapping
confirm your selection. the top of the camera body twice, the
operations below can be used.
P Display next image: Tap the right side of
FLASH AUTO
the camera once.
Display previous image: Tap the left
0.0 side of the camera once.
WB
AUTO
ISO
Fast forward and reverse: Tilt the
AUTO
camera to the right or the left.
4 14M
EN 51
Return to the shooting mode: Tap the Using the LED illuminator as an
top side of the camera twice. auxiliary light [LED ILLUMINATOR]
Take a picture: Tap the back of the
camera twice (Only for the [a SNOW] (STYLUS TOUGH-8010/μ TOUGH-8010 and
mode). STYLUS TOUGH-6020/μ TOUGH-6020 only)
Submenu 2 Application
OFF Disables the LED illuminator.
ON Enables the LED illuminator.
When tapping the camera’s top “Using the LED illuminator” (p. 32)
TOP
STR INTVL
AVG NORM
52 EN
Printing
EXIT PRINT OK
EN 53
Changing the printer’s settings 5 Use FG to select the
for printing [CUSTOM PRINT] [BORDERLESS] or [PICS/SHEET]
settings, and press the A button.
1 Follow Steps 1 and 2 for [EASY
Submenu 4 Application
PRINT] (p. 53).
The image is printed with a border
2 Press the A button. OFF/ON*1
around it ([OFF]).
The image is printed to fill the
entire paper ([ON]).
3 Use FG to select the print mode, (The number of The number of images per sheet
and press the A button. images per sheet ([PICS/SHEET]) is selectable only
varies depending when [MULTI PRINT] is selected
on the printer.) in Step 3.
PRINT MODE SELECT
*1
PRINT The available settings for [BORDERLESS] vary
ALL PRINT depending on the printer.
MULTI PRINT If [STANDARD] is selected in Steps 4 and 5,
ALL INDEX the image is printed at the printer’s standard
PRINT ORDER settings.
EXIT MENU SET OK 4/30
Submenu 2 Application
This prints the image selected in NORM 14M
PRINT 100 0004
FILE
Step 6.
’10/02/26 12:30
This prints all images stored in the
ALL PRINT PRINT OK
internal memory or card.
SINGLE PRINT MORE
This prints one image in a multiple
MULTI PRINT
layout format.
ALL INDEX
This prints an index of all images
stored in the internal memory
6 Use HI to select an image.
7
or card.
This prints images based on the Press F to make a print reservation
PRINT ORDER*1
print reservation data on the card. for the current image. Press G to
*1
make the detailed printer settings
[PRINT ORDER] is available only when print
reservations have been made. “Print Reservations for the current image.
(DPOF)” (p. 56)
To make the detailed printer settings
4 Use FG to select [SIZE] (Submenu 1 Use FGHI to select the setting, and
3), and press I. press the A button.
SIZE BORDERLESS
EXIT MENU SET OK
STANDARD STANDARD
54 EN
Submenu Submenu
Application
9 Press the A button.
5 6
This selects the number PRINT
<× 0 to 10
of prints.
Selecting [WITH] prints the
images with the date. PRINT
WITH/ CANCEL
DATE Selecting [WITHOUT]
WITHOUT
prints the images without
the date.
Selecting [WITH] prints the BACK MENU SET OK
file name on the image.
WITH/
FILE NAME Selecting [WITHOUT] does
WITHOUT
not print any file name on 10 Use FG to select [PRINT], and
the image.
press the A button.
(Proceeds
to the This selects a portion of ● Printing starts.
P
setting the image for printing. ● When [OPTION SET] is selected in [ALL PRINT]
screen.) mode, [PRINT INFO] screen is displayed.
● When printing is finished, the [PRINT MODE
SELECT] screen is displayed.
To crop an image [P]
1 Use the zoom buttons to select the size PRINT MODE SELECT
of the cropping frame, use FGHI
PRINT
to move the frame, and then press the
ALL PRINT
A button.
MULTI PRINT
ALL INDEX
PRINT ORDER
Cropping frame
To cancel printing
1 Press the m button while [DO NOT
SET OK REMOVE USB CABLE] is displayed.
2 Select [CANCEL] using FG and then
2 Use FG to select [OK], and press the press the A button.
A button.
EN 55
11 Press the m button. 3 Use FG to select [<], and press
the A button.
12 When the message [REMOVE USB
4/30
CABLE] is displayed, disconnect
0
the USB cable from the camera and
printer.
NORM 14M
Print Reservations (DPOF*1) 100 0004
FILE
’10/02/26 12:30
In print reservations, the number of prints and SET OK
date imprint option are saved in the image on
4
the card. This enables easy printing at a printer
or print shop supporting DPOF by using only the Use HI to select the image for
print reservations on the card without a computer print reservation. Use FG to select
or a camera. the quantity. Press the A button.
*1
DPOF is a standard for storing automatic printout
information from digital cameras. X
1
This prints the image with the
TIME
Display the [SETUP] menu. shooting time.
“Using the Menu” (p. 4)
2
PRINT ORDER
From the playback menu q, select
[PRINT ORDER] and then press the 1 ( 1)
A button.
SET
PRINT ORDER CANCEL
6
U
Use FG to select [SET], and press
the A button.
EXIT MENU SET OK
56 EN
Reserving one print each of all Resetting the print reservation
images on the card [U] data for selected images
1 Follow Steps 1 and 2 in [<] (p. 56). 1 Follow Steps 1 and 2 in [<] (p. 56).
2 Use FG to select [U], and press 2 Use FG to select [<], and press
the A button. the A button.
2 Select either [<] or [U], and press 5 If necessary, repeat Step 4, and then
the A button. press the A button when finished.
PRINT ORDER SETTING 6 Use FG to select the [X] (date
PRINT ORDERED print) screen option, and press the
A button.
RESET ● The settings are applied to the remaining images
KEEP with the print reservation data.
EN 57
Usage Tips
“The camera does not work even when “Vertical lines appear on the screen”.
batteries are installed”.
● This condition may occur when the camera is
● Insert recharged batteries in the correct direction. pointed at an extremely bright subject under a
“Inserting the battery” (p. 11), “Battery charge and clear sky and so on. The lines do not appear,
camera setup” (p. 11), “Charging the battery with however, in the final image.
the included USB-AC adapter” (p. 13)
“The light is caught in the picture”.
● Battery performance may have been reduced
temporarily due to low temperature. Take the ● Shooting with flash in dark situations results in
batteries out of the camera, and warm them by an image with many flash reflections on dust in
putting them in your pocket for a while. the air.
58 EN
Error message Error message Corrective action
SET OK
select [YES], and press the
A button.*2
Internal memory/Card problem
Take pictures before viewing
NO PICTURE them.
Problem with selected image
Use photo retouch software,
etc. to view the image on a
PICTURE computer. If the image still
ERROR cannot be viewed, the image file
is corrupted.
Battery problem
BATTERY Charge the battery.
EMPTY
Connection problem
Connect the camera and
NO computer or printer correctly.
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
EN 59
Shooting tips
When you are unsure of how to take a picture Fast-moving object
that you envision, refer to the information below.
Focusing
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
60 EN
Exposure (brightness) Image quality
Color hue
EN 61
Playback/Editing tips
Playback
Editing
62 EN
Appendix
EN 63
• STYLUS TOUGH-8010/μ TOUGH-8010, Using a separately sold
STYLUS TOUGH-6020/μ TOUGH-6020: When charger
the included USB-AC adapter (F-2AC) is used,
charging usually takes approximately 3 hours A charger* (sold separately) can be used to
(varies on usage). charge the battery. In this case, remove the
STYLUS TOUGH-3000/μ TOUGH-3000: battery from the camera and set the battery to
When the included USB-AC adapter (F-2AC) the charger.
is used, charging usually takes approximately * STYLUS TOUGH-8010/μ TOUGH-8010,
2.5 hours (varies on usage). STYLUS TOUGH-6020/μ TOUGH-6020: LI-50C
• The included USB-AC adapter (F-2AC) has STYLUS TOUGH-3000/μ TOUGH-3000:
been designed to be used for charging and LI-41C/LI-40C
playback. Make sure that shooting is not being
used while the USB-AC adapter is connected
to the camera. Using your charger and
• The included USB-AC adapter (F-2AC) is USB-AC adapter abroad
designed to be used only with this camera.
• The charger and USB-AC adapter can be
Other cameras cannot be charged with this
used in most home electrical sources within
USB-AC adapter.
the range of 100 V to 240 V AC (50/60Hz)
• Do not connect the included USB-AC adapter
around the world. However, depending on the
(F-2AC) to equipment other than this camera.
country or area you are in, the AC wall outlet
• For plug-in type USB-AC adapter:
may be shaped differently and the charger and
The included USB-AC adapter (F-2AC) is
USB-AC adapter may require a plug adapter to
intended to be correctly orientated in a vertical
match the wall outlet. For details, ask at your
or floor mount position.
local electrical shop or travel agent.
• Do not use travel voltage converters as they
Charging the battery by could damage your charger and USB-AC
connecting the camera to a adapter.
computer
Using a SD/SDHC memory card
The battery can be charged by connecting the
camera to a computer. A card (and internal memory) also corresponds
to the film that records images in a film camera.
Using a separately sold AC Otherwise, the recorded images (data) can be
erased, and retouching is also available with
adapter the use of a computer. Cards can be removed
An AC adapter (D-7AC/sold separately) is useful from the camera and exchanged, but this is
for time-consuming tasks such as when running not possible with the internal memory. Use of
a slideshow for a long period of time. To use larger capacity cards enables you to take more
a separately sold AC adapter for this camera, pictures.
the multi-adapter (CB-MA3/sold separately) is
required. SD/SDHC memory card write-protect
Do not use any other AC adapter with this switch
camera. The SD/SDHC memory card body has a
write-protect switch. If you set the switch to
the “LOCK” side, you will not be able to write
to the card, delete data or format. Return the
switch to enable writing.
LOCK
64 EN
Cards compatible with this camera Readout/recording process of the card
SD/SDHC memory cards (for more During shooting, the current memory
information, visit the Olympus website) indicator lights in red while the camera is
writing data. Never open the battery/card/
connector cover or unplug the USB cable.
This can not only damage the image data
but also render the internal memory or card
unusable.
0.0
WB
AUTO
ISO
AUTO
00:34
4 14M 4/30
Shooting mode
’10/02/26 12:30
Playback mode
EN 65
Number of storable pictures (still images)/Continuous recording length (movies) in the
internal memory and SD/SDHC memory cards
The figures in the following tables are quoted only as a rough guideline. The actual number of
storable pictures or continuous recording lengths will differ according to the shooting conditions and
memory cards used.
The figures in the table below are the number of the storable pictures when using the internal
memory formatted. [MEMORY FORMAT]/[FORMAT] (p. 44)
The maximum file size of a single movie is 4 GB, regardless of the capacity of the card.
Still pictures
Number of storable still pictures
IMAGE SIZE COMPRESSION Internal memory SD/SDHC memory card (1GB)
With sound Without sound With sound Without sound
L 225 237 133 140
6 4288×3216
M 423 466 251 276
L 373 406 220 240
4 3264×2448
M 677 793 400 469
L 570 651 337 385
n 2560×1920
M 1,036 1,337 613 790
L 819 996 484 589
3 2048×1536
M 1,411 2,032 846 1,226
L 1,239 1,693 732 1,001
2 1600×1200
M 1,881 3,175 1,133 1,938
L 1,639 2,540 984 1,540
1 1280×960
M 2,419 5,080 1,430 3,004
L 2,988 8,468 1,820 5,461
7 640×480
M 3,629 16,936 2,145 10,013
L 295 315 175 187
K 4288×2416
M 546 619 324 368
L 1,154 1,539 690 924
0 1920×1080
M 1,814 2,988 1,092 1,820
Movies
Continuous recording length
IMAGE
IMAGE SIZE Internal memory SD/SDHC memory card (1GB)
QUALITY
With sound Without sound With sound Without sound
L 23 min. 13 sec. 23 min. 34 sec. 13 min. 18 sec. 13 min. 29 sec.
L 1280×720
M 29 min. 29 min. 19 min. 48 sec. 20 min. 13 sec.
L 34 min. 35 sec. 35 min. 20 sec. 19 min. 48 sec. 20 min. 13 sec.
8 640×480
M 67 min. 40 sec. 70 min. 36 sec. 38 min. 44 sec. 40 min. 25 sec.
9 320×240 L 70 min. 8 sec. 73 min. 17 sec. 40 min. 8 sec. 41 min. 57 sec.
66 EN
STYLUS TOUGH-6020
Still pictures
Number of storable still pictures
IMAGE SIZE COMPRESSION Internal memory SD/SDHC memory card (1GB)
With sound Without sound With sound Without sound
L 89 94 133 140
6 4288×3216
M 168 185 251 276
L 148 161 220 240
4 3264×2448
M 269 315 400 469
L 227 259 337 385
n 2560×1920
M 412 532 613 790
L 326 396 484 589
3 2048×1536
M 561 808 846 1,226
L 493 674 732 1,001
2 1600×1200
M 749 1,263 1,133 1,938
L 652 1,011 984 1,540
1 1280×960
M 963 2,022 1,430 3,004
L 1,189 3,370 1,820 5,461
7 640×480
M 1,444 6,741 2,145 10,013
L 117 125 175 187
K 4288×2416
M 217 246 324 368
L 459 612 690 924
0 1920×1080
M 722 1,189 1,092 1,820
Movies
Continuous recording length
IMAGE
IMAGE SIZE Internal memory SD/SDHC memory card (1GB)
QUALITY
With sound Without sound With sound Without sound
L 8 min. 36 sec. 8 min. 43 sec. 13 min. 18 sec. 13 min. 29 sec.
L 1280×720
M 12 min. 48 sec. 13 min. 5 sec. 19 min. 48 sec. 20 min. 13 sec.
L 12 min. 48 sec. 13 min. 5 sec. 19 min. 48 sec. 20 min. 13 sec.
8 640×480
M 25 min. 3 sec. 26 min. 8 sec. 38 min. 44 sec. 40 min. 25 sec.
9 320×240 L 25 min. 58 sec. 27 min. 8 sec. 40 min. 8 sec. 41 min. 57 sec.
EN 67
STYLUS TOUGH-3000/μ TOUGH-3000
Still pictures
Number of storable still pictures
IMAGE SIZE COMPRESSION Internal memory SD/SDHC memory card (1GB)
With sound Without sound With sound Without sound
L 103 109 154 163
5 3968×2976
M 194 217 288 323
L 148 161 220 240
4 3264×2448
M 269 315 400 469
L 227 259 337 385
n 2560×1920
M 412 532 613 790
L 326 396 484 589
3 2048×1536
M 561 808 846 1,226
L 493 674 732 1,001
2 1600×1200
M 749 1,263 1,133 1,938
L 652 1,011 984 1,540
1 1280×960
M 963 2,022 1,430 3,004
L 1,189 3,370 1,820 5,461
7 640×480
M 1,444 6,741 2,145 10,013
L 135 146 202 218
K 3968×2232
M 249 288 370 429
L 459 612 690 924
0 1920×1080
M 722 1,189 1,092 1,820
Movies
Continuous recording length
IMAGE
IMAGE SIZE Internal memory SD/SDHC memory card (1GB)
QUALITY
With sound Without sound With sound Without sound
L 8 min. 36 sec. 8 min. 43 sec. 13 min. 18 sec. 13 min. 29 sec.
L 1280×720
M 12 min. 48 sec. 13 min. 5 sec. 19 min. 48 sec. 20 min. 13 sec.
L 12 min. 48 sec. 13 min. 5 sec. 19 min. 48 sec. 20 min. 13 sec.
8 640×480
M 25 min. 3 sec. 26 min. 8 sec. 38 min. 44 sec. 40 min. 25 sec.
9 320×240 L 25 min. 58 sec. 27 min. 8 sec. 40 min. 8 sec. 41 min. 57 sec.
68 EN
Taking pictures with the 5 Select the flash mode.
Olympus Wireless RC Flash “Using the flash” (p. 28)
System
6 Take a test shot to check the
STYLUS TOUGH-8010/μ TOUGH-8010 only
operation of the flash and the
You can take pictures with a wireless flash resulting image.
when using a flash compatible with the Olympus Be sure to check the charge level of the
Wireless RC Flash System. This enables camera and wireless flash before taking
multi-flash photography using multiple flash pictures.
units compatible with this system. The camera’s
Although there is no limit on the number of
built-in flash is used for communication between wireless flash units that are set up, usage of
the camera and flash. a maximum of three units is recommended
For details about operation of a wireless to prevent malfunction due to interference
flash, refer to the instruction manual for the with each other.
special external flash. When the camera flash is set to [#RC],
1
the camera built-in flash is used for
Set the wireless flash based on the communication with the wireless flash. It
guidelines below. cannot used for taking pictures.
2
the camera is subject to substantial or excessive
Turn on the wireless flash. impact.
Shock resistance: The anti-shock feature
3 Use the MODE button on the warrants*2 the operation of the camera against
wireless flash to set to RC mode, accidental impact incurred from everyday use
of your digital compact camera. The anti-shock
and make the channel and group feature does not unconditionally warrant all
settings. (Channel: CH1, Group: A) defective operation or cosmetic damage.
4
Cosmetic damage, such as scratches and dents,
Set [REMOTE FLASH] (p. 37) on are not covered under the warranty.
the camera to [#RC], and set the
channel to the same setting as the
wireless flash.
EN 69
As with any electronic device, proper care Notes after use
and maintenance are required to preserve • Foreign materials may be attached to the
the integrity and operation of your camera. To camera when using the camera in conditions
maintain camera performance, please take with foreign materials such as dirt, dust or
your camera to the nearest Olympus Authorized sand. If you continue to use the camera in
Service Center to have it inspected after such conditions, it could cause damage to
any major impact. In the event the camera is the camera. To avoid such damage, wash the
damaged as a result of negligence or misuse, camera using the following method.
the warranty will not cover costs associated
1 Insert the battery and close the battery/
with the service or repair of your camera. For
card/connector cover firmly so that lock
additional information on our warranty, please
makes the clicking sound.
visit to the Olympus website for your local area.
Please observe the following care instructions 2 Fill a bucket with fresh water, immerse
for your camera. the camera in the bucket with the lens
surface downward and shake the camera
*1 As determined by Olympus pressure testing
thoroughly. Or rinse the lens surface by
equipment in accordance with IEC Standard
placing it directly under a strong stream of
Publication 529 IPX8 - This means that the
tap water.
camera can be used normally under water
at a specified water pressure. 3 Press the n button several times in
*2 This anti-shock performance is confirmed by the water and close/open the lens cover
Olympus’ testing conditions in accordance repeatedly.
with MIL-STD-810F, Method 516.5, 4 Furthermore, shake the camera further
Procedure IV (Transit Drop Test). For more with the cover opened.
details of Olympus’ testing conditions,
please refer to the Olympus website for your
local area.
Before Use:
• Check the camera for foreign material
including dirt, dust or sand.
• Be sure to close the battery/card/connector
cover firmly so that lock makes the clicking
sound.
• Do not open the battery/card/connector cover Follow the Steps 1 to 4, then check if the
with wet hands, while under water, or in a lens cover moves smoothly.
damp or dusty environment (e.g. beach). If the lens cover does not move smoothly,
rinse the lens face by placing it directly under
After Use: a strong stream of tap water and pressing the
• Be sure to wipe off any excess water or debris n button repeatedly.
after using the camera under water.
• After the camera is used under seawater, Storage and Maintenance
immerse the camera in a bucket containing • Do not leave the camera in an environment at
fresh water for about 10 minutes (with high temperature (40°C (104°F) or more) or at
the battery/card/connector cover firmly low temperature (-10°C (14°F) or less). Failure
closed). After that, dry the camera in the to do so may break down water resistance.
shade with good ventilation. • Do not use chemicals for cleaning, rust
• Water drops may be observed on the inner prevention, anti-fogging, repairing, etc. Failure
surface of the battery/card/connector cover to do so may break down water resistance.
after you open the cover. If any water drops
are found, be sure to wipe them off before
using the camera.
70 EN
• Do not leave the camera in water for a long SAFETY PRECAUTIONS
time. Prolonged exposure to water will
cause damage to the camera’s appearance
and/or deteriorate water resistance. CAUTION
RISK OF ELECTRIC SHOCK
• In order to preserve the water resistant
DO NOT OPEN
feature, as with any underwater housing,
it is recommended that the waterproof CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
packing (and seals) are replaced annually.
NO USER-SERVICEABLE PARTS INSIDE.
For the Olympus distributors or service REFER SERVICING TO QUALIFIED OLYMPUS
stations where the waterproof packing can SERVICE PERSONNEL.
be replaced, visit Olympus website for your
local area. An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
Closing Battery/card/connector cover documentation provided with the product.
DANGER If the product is used without observing
the information given under this symbol,
serious injury or death may result.
WARNING If the product is used without observing the
information given under this symbol, injury
or death may result.
CAUTION If the product is used without observing the
information given under this symbol, minor
personal injury, damage to the equipment,
or loss of valuable data may result.
Battery/card/
connector cover WARNING!
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO
The included accessories (e.g. USB- WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
AC adapter) do not offer shock or water
resistance.
General Precautions
Read All Instructions — Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
Cleaning — Always unplug this product from the
wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
Water and Moisture — For precautions on
products with weatherproof designs, read the
weatherproofing sections.
Location — To avoid damage to the product, mount
the product securely on a stable tripod, stand,
or bracket.
Power Source — Connect this product only to the
power source described on the product label.
Lightning — If a lightning storm occurs while using
an AC adapter, remove it from the wall outlet
immediately.
Foreign Objects — To avoid personal injury, never
insert a metal object into the product.
Heat — Never use or store this product near any
heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo amplifiers.
EN 71
Handling the Camera • In places subject to extremely cold
temperatures, the temperature of the camera’s
WARNING body may be lower than the environmental
• Do not use the camera near flammable or temperature. If possible, wear gloves when
explosive gases. handling the camera in cold temperatures.
• Do not use the flash and LED on people • Be careful with the strap.
(infants, small children, etc.) at close range. • Be careful with the strap when you carry the
• You must be at least 1 m (3 ft.) away from the camera. It could easily catch on stray objects
faces of your subjects. Firing the flash too close and cause serious damage.
to the subject’s eyes could cause a momentary • Do not touch the metallic parts of the camera
loss of vision. for a long period of time at low temperatures.
• Keep young children and infants away from • This may damage your skin. At low
the camera. temperatures, handle the camera while wearing
• Always use and store the camera out of the gloves.
reach of young children and infants to prevent
the following dangerous situations which could Battery Handling Precautions
cause serious injury:
Follow these important guidelines to prevent
• Becoming entangled in the camera strap, batteries from leaking, overheating, burning,
causing strangulation. exploding, or causing electrical shocks or
• Accidentally swallowing the battery, cards or burns.
other small parts.
• Accidentally firing the flash into their own eyes
or those of another child. DANGER
• Accidentally being injured by the moving parts • The camera uses a lithium ion battery specified
of the camera. by Olympus. Charge the battery with the specified
• Do not look at the sun or strong lights with the AC adapter or charger. Do not use any other AC
camera. adapters or chargers.
• Do not use or store the camera in dusty or • Never heat or incinerate batteries.
humid places. • Take precautions when carrying or storing
• Do not cover the flash with a hand while firing. batteries to prevent them from coming into contact
• Use SD/SDHC memory cards only. Never use with any metal objects such as jewelry, pins,
other types of cards. fasteners, etc.
If you accidently insert another type of card into • Never store batteries where they will be
the camera, contact an authorized distributor or exposed to direct sunlight, or subjected to high
service center. Do not try to remove the card by temperatures in a hot vehicle, near a heat source,
force. etc.
• To prevent causing battery leaks or damaging their
terminals, carefully follow all instructions regarding
CAUTION the use of batteries. Never attempt to disassemble
• Stop using the camera immediately if you a battery or modify it in any way, solder, etc.
notice any unusual odors, noise, or smoke • If battery fluid gets into your eyes, flush your eyes
around it. immediately with clear, cold running water and
• Never remove the batteries with bare hands, seek medical attention immediately.
which may cause a fire or burn your hands. • Always store batteries out of the reach of small
• Do not leave the camera in places where it may children. If a child accidentally swallows a battery,
be subject to extremely high temperatures. seek medical attention immediately.
• Doing so may cause parts to deteriorate and, in
some circumstances, cause the camera to catch WARNING
fire. Do not use the charger or AC adapter if it is • Keep batteries dry at all times.
covered (such as a blanket). This could cause • To prevent batteries from leaking, overheating,
overheating, resulting in fire. or causing a fire or explosion, use only batteries
• Handle the camera with care to avoid getting a recommended for use with this product.
low-temperature burn. • Insert the battery carefully as described in the
• When the camera contains metal parts, operating instructions.
overheating can result in a low-temperature • If rechargeable batteries have not been recharged
burn. Pay attention to the following: within the specified time, stop charging them and
• When used for a long period, the camera will do not use them.
get hot. If you hold on to the camera in this • Do not use a battery if it is cracked or broken.
state, a low-temperature burn may be caused.
72 EN
• If a battery leaks, becomes discolored or • The camera may malfunction if it is used in
deformed, or becomes abnormal in any other way a location where it is subject to a magnetic/
during operation, stop using the camera. electromagnetic field, radio waves, or high voltage,
• If a battery leaks fluid onto your clothing or skin, such as near a TV set, microwave, video game,
remove the clothing and flush the affected area loud speakers, large monitor unit, TV/radio tower,
with clean, running cold water immediately. If or transmission towers. In such cases, turn the
the fluid burns your skin, seek medical attention camera off and on again before further operation.
immediately. • Always observe the operating environment
• Never subject batteries to strong shocks or restrictions described in the camera’s manual.
continuous vibration.
Battery Handling Precautions
CAUTION
• Before loading, always inspect the battery carefully • This camera uses a lithium ion battery specified by
for leaks, discoloration, warping, or any other Olympus. Do not use any other type of battery.
abnormality. • If the battery’s terminals get wet or greasy, camera
• The battery may become hot during prolonged contact failure may result. Wipe the battery well
use. To avoid minor burns, do not remove it with a dry cloth before use.
immediately after using the camera. • Always charge a battery when using it for the first
• Always unload the battery from the camera before time, or if it has not been used for a long period.
storing the camera for a long period. • When operating the camera with battery power
at low temperatures, try to keep the camera and
spare battery as warm as possible. A battery that
Caution for Usage Environment has run down at low temperatures may be restored
• To protect the high-precision technology contained after it is warmed at room temperature.
in this product, never leave the camera in the • The number of pictures you can take may vary
places listed below, no matter if in use or storage: depending on the shooting conditions or battery.
• Places where temperatures and/or humidity • Before going on a long trip, and especially before
are high or go through extreme changes. traveling abroad, purchase extra batteries. A
Direct sunlight, beaches, locked cars, or near recommended battery may be difficult to obtain
other heat sources (stove, radiator, etc.) or while traveling.
humidifiers. • Please recycle batteries to help save our planet’s
• In sandy or dusty environments. resources. When you throw away dead batteries,
be sure to cover their terminals and always
• Near flammable items or explosives.
observe local laws and regulations.
• In wet places, such as bathrooms or in the rain.
When using products with weatherproof designs,
read their manuals as well. LCD Monitor
• In places prone to strong vibrations. • Do not push the monitor forcibly; otherwise the
• Never drop the camera or subject it to severe image may become vague, resulting in a playback
shocks or vibrations. mode failure or damage to the monitor.
• When mounted on a tripod, adjust the position of • A strip of light may appear on the top/bottom of the
the camera with the tripod head. Do not twist the monitor, but this is not a malfunction.
camera. • When a subject is viewed diagonally in the
• Do not touch electric contacts on cameras. camera, the edges may appear zigzagged on the
• Do not leave the camera pointed directly at the monitor. This is not a malfunction; it will be less
sun. This may cause lens or shutter curtain noticeable in playback mode.
damage, color failure, ghosting on the CCD, or • In places subject to low temperatures, the LCD
may possibly cause fires. monitor may take a long time to turn on or its
• Do not push or pull severely on the lens. color may change temporarily. When using the
• Before storing the camera for a long period, camera in extremely cold places, it is a good idea
remove the batteries. Select a cool, dry location to occasionally place it in a warm place. An LCD
for storage to prevent condensation or mold from monitor exhibiting poor performance due to low
forming inside the camera. After storage, test the temperatures will recover in normal temperatures.
camera by turning it on and pressing the shutter • The LCD used for the monitor is made with
button to make sure that it is operating normally. high-precision technology. However, black spots
or bright spots of light may appear constantly on
the LCD Monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the
spot may not be uniform in color and brightness.
This is not a malfunction.
EN 73
Legal and Other Notices FCC Notice
• Olympus makes no representations or warranties • Radio and Television Interference
regarding any damages, or benefit expected by • Changes or modifications not expressly approved
using this unit lawfully, or any request from a third by the manufacturer may void the user’s authority
person, which are caused by the inappropriate use to operate this equipment. This equipment has
of this product. been tested and found to comply with the limits for
• Olympus makes no representations or warranties a Class B digital device, pursuant to Part 15 of the
regarding any damages or any benefit expected FCC Rules. These limits are designed to provide
by using this unit lawfully which are caused by reasonable protection against harmful interference
erasing picture data. in a residential installation.
• This equipment generates, uses, and can radiate
Disclaimer of Warranty radio frequency energy and, if not installed
and used in accordance with the instructions,
• Olympus makes no representations or warranties, may cause harmful interference to radio
either expressed or implied, by or concerning any communications.
content of these written materials or software, and • However, there is no guarantee that interference
in no event shall be liable for any implied warranty will not occur in a particular installation. If this
of merchantability or fitness for any particular equipment does cause harmful interference
purpose or for any consequential, incidental or to radio or television reception, which can be
indirect damages (including but not limited to determined by turning the equipment off and
damages for loss of business profits, business on, the user is encouraged to try to correct the
interruption and loss of business information) interference by one or more of the following
arising from the use or inability to use these measures:
written materials or software or equipment. Some • Adjust or relocate the receiving antenna.
countries do not allow the exclusion or limitation • Increase the distance between the camera and
of liability for consequential or incidental damages receiver.
or of the implied warranty, so the above limitations
• Connect the equipment to an outlet on a circuit
may not apply to you.
different from that to which the receiver is
• Olympus reserves all rights to this manual.
connected.
• Consult your dealer or an experienced radio/TV
Warning technician for help. Only the OLYMPUS-supplied
Unauthorized photographing or use of USB cable should be used to connect the
copyrighted material may violate applicable camera to USB enabled personal computers
copyright laws. Olympus assumes no (PC).
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of Any unauthorized changes or modifications to
copyright owners. this equipment would void the user’s authority
to operate it.
Copyright Notice
Use Only Dedicated Rechargeable
All rights reserved. No part of these written Battery, Battery Charger and
materials or this software may be reproduced
AC adapter
or used in any form or by any means, electronic
or mechanical, including photocopying and We strongly recommend that you use only
recording or the use of any type of information the genuine Olympus dedicated rechargeable
storage and retrieval system, without the prior battery, battery charger and AC adapter with
written permission of Olympus. No liability this camera. Using a non-genuine rechargeable
is assumed with respect to the use of the battery, battery charger and/or AC adapter
information contained in these written materials may result in fire or personal injury due to
or software, or for damages resulting from leakage, heating, ignition or damage to the
the use of the information contained therein. battery. Olympus does not assume any liability
Olympus reserves the right to alter the features for accidents or damage that may result from
and contents of this publication or software the use of a battery, battery charger and/or
without obligation or advance notice. AC adapter that are not genuine Olympus
accessories.
74 EN
For customers in North and South Repair, replacement, or adjustment of defective
America Products shall be Olympus’s sole obligation and
the customer’s sole remedy hereunder.
For customers in USA The customer is liable and shall pay for shipment
Declaration of Conformity of the Products to the Olympus Service Center.
Model Number : STYLUS TOUGH-8010/ Olympus shall not be obligated to perform
μ TOUGH-8010 preventive maintenance, installation,
STYLUS TOUGH-6020/ deinstallation, or maintenance.
μ TOUGH-6020 Olympus reserves the right to (i) use
STYLUS TOUGH-3000/ reconditioned, refurbished, and/or serviceable
μ TOUGH-3000 used parts (that meet Olympus’s quality
Trade Name : OLYMPUS assurance standards) for warranty or any other
Responsible Party : repairs and (ii) make any internal or external
design and/or feature changes on or to its
Address : 3500 Corporate products without any liability to incorporate such
Parkway, P.O. Box changes on or to the Products.
610, Center Valley, PA
18034-0610, U.S.A. WHAT IS NOT COVERED BY THIS
Telephone Number : 484-896-5000 LIMITED WARRANTY
Excluded from this limited warranty and not
Tested To Comply With FCC Standards warranted by Olympus in any fashion, either
FOR HOME OR OFFICE USE express, implied, or by statute, are:
This device complies with Part 15 of the FCC rules. (a) products and accessories not manufactured by
Operation is subject to the following two conditions: Olympus and/or not bearing the “OLYMPUS” brand
(1) This device may not cause harmful interference. label (the warranty coverage for products and
(2) This device must accept any interference accessories of other manufacturers, which may be
received, including interference that may cause distributed by Olympus, is the responsibility of the
undesired operation. manufacturers of such products and accessories
in accordance with the terms and duration of such
For customers in Canada manufacturers’ warranties);
(b) any Product which has been disassembled,
This Class B digital apparatus meets all
repaired, tampered with, altered, changed, or
requirements of the Canadian Interference-
modified by persons other than Olympus’s own
Causing Equipment Regulations. authorized service personnel unless repair by
others is made with the written consent of Olympus;
OLYMPUS WORLDWIDE LIMITED (c) defects or damage to the Products resulting
WARRANTY - IMAGING PRODUCTS from wear, tear, misuse, abuse, negligence,
Olympus warrants that the enclosed Olympus® sand, liquids, impact, improper storage,
imaging product(s) and related Olympus® nonperformance of scheduled operator and
maintenance items, battery leakage, use of non-
accessories (individually a “Product” and
“OLYMPUS” brand accessories, consumables, or
collectively the “Products”) will be free from
supplies, or use of the Products in combination
defects in materials and workmanship under with non-compatible devices;
normal use and service for a period of one (1) (d) software programs;
year from the date of purchase. (e) supplies and consumables (including but not
If any Product proves to be defective within the limited to lamps, ink, paper, film, prints, negatives,
one-year warranty period, the customer must cables and batteries); and/or
return the defective Product to any of Olympus (f) Products which do not contain a validly placed
Service Centers, following the procedure and recorded Olympus serial number, unless they
set forth below (See “WHAT TO DO WHEN are a model on which Olympus does not place
SERVICE IS NEEDED”). and record serial numbers.
Olympus, at its sole discretion, will repair,
replace, or adjust the defective Product, provided EXCEPT FOR THE LIMITED WARRANTY SET
that Olympus investigation and factory inspection FORTH ABOVE, OLYMPUS MAKES NO AND
disclose that (a) such defect developed under DISCLAIMS ALL OTHER REPRESENTATIONS,
normal and proper use and (b) the Product is GUARANTIES, CONDITIONS, AND
covered under this limited warranty. WARRANTIES CONCERNING THE
PRODUCTS, WHETHER DIRECT OR INDIRECT,
EN 75
EXPRESS OR IMPLIED, OR ARISING UNDER This limited warranty is the complete and
ANY STATUTE, ORDINANCE, COMMERCIAL exclusive statement of warranty which
USAGE OR OTHERWISE, INCLUDING BUT Olympus agrees to provide with respect to the
NOT LIMITED TO ANY WARRANTY OR Products and it shall supersede all prior and
REPRESENTATION AS TO THE SUITABILITY, contemporaneous oral or written agreements,
DURABILITY, DESIGN, OPERATION, OR understandings, proposals, and communications
CONDITON OF THE PRODUCTS (OR ANY pertaining to the subject matter hereof.
PART THEREOF) OR THE MERCHANTABILITY This limited warranty is exclusively for the
OF THE PRODUCTS OR THEIR FITNESS FOR benefit of the original customer and cannot be
A PARTICULAR PURPOSE, OR RELATING transferred or assigned.
TO THE INFRINGEMENT OF ANY PATENT,
COPYRIGHT, OR OTHER PROPRIETARY WHAT TO DO WHEN SERVICE IS NEEDED
RIGHT USED OR INCLUDED THEREIN. The customer must transfer any image or other
IF ANY IMPLIED WARRANTIES APPLY AS data saved on a Product to another image or
A MATTER OF LAW, THEY ARE LIMITED data storage medium and/or remove any film
IN DURATION TO THE LENGTH OF THIS from the Product prior to sending the Product to
LIMITED WARRANTY. Olympus for service.
SOME STATES MAY NOT RECOGNIZE
A DISCLAIMER OR LIMITATION OF IN NO EVENT SHALL OLYMPUS BE
WARRANTIES AND/OR LIMITATION OF RESPONSIBLE FOR SAVING, KEEPING OR
LIABILITY SO THE ABOVE DISCLAIMERS AND MAINTAINING ANY IMAGE OR DATA SAVED
EXCLUSIONS MAY NOT APPLY. ON A PRODUCT RECEIVED BY IT FOR
THE CUSTOMER MAY ALSO HAVE DIFFERENT SERVICE, OR ON ANY FILM CONTAINED
AND/OR ADDITIONAL RIGHTS AND REMEDIES WITHIN A PRODUCT RECEIVED BY IT
THAT VARY FROM STATE TO STATE. FOR SERVICE, NOR SHALL OLYMPUS BE
THE CUSTOMER ACKNOWLEDGES AND RESPONSIBLE FOR ANY DAMAGES IN
AGREES THAT OLYMPUS SHALL NOT THE EVENT ANY IMAGE OR DATA IS LOST
BE RESPONSIBLE FOR ANY DAMAGES OR IMPAIRED WHILE SERVICE IS BEING
THAT THE CUSTOMER MAY INCUR FROM PERFORMED (INCLUDING, WITHOUT
DELAYED SHIPMENT, PRODUCT FAILURE, LIMITATION, DIRECT, INDIRECT, INCIDENTAL,
PRODUCT DESIGN, SELECTION, OR CONSEQUENTIAL OR SPECIAL DAMAGES,
PRODUCTION, IMAGE OR DATA LOSS OR LOSS OF PROFITS OR LOSS OF USE),
IMPAIRMENT OR FROM ANY OTHER CAUSE, WHETHER OR NOT OLYMPUS SHALL BE OR
WHETHER LIABILITY IS ASSERTED IN SHOULD BE AWARE OF THE POSSIBILITY OF
CONTRACT, TORT (INCLUDING NEGLIGENCE SUCH POTENTIAL LOSS OR IMPAIRMENT.
AND STRICT PRODUCT LIABILITY) OR
OTHERWISE. IN NO EVENT SHALL OLYMPUS Package the Product carefully using ample
BE LIABLE FOR ANY INDIRECT, INCIDENTAL, padding material to prevent damage in transit
CONSEQUENTIAL OR SPECIAL DAMAGES OF and either deliver it to the Authorized Olympus
ANY KIND (INCLUDING WITHOUT LIMITATION Dealer that sold you the Product or ship it
LOSS OF PROFITS OR LOSS OF USE), postage prepaid and insured to any of our
WHETHER OR NOT OLYMPUS SHALL BE OR Olympus Service Centers.
SHOULD BE AWARE OF THE POSSIBILITY OF When returning Products for service, your
SUCH POTENTIAL LOSS OR DAMAGE. package should include the following:
1 Sales receipt showing date and place of
Representations and warranties made by any purchase.
person, including but not limited to dealers, 2 Copy of this limited warranty bearing the
representatives, salespersons, or agents of Product serial number corresponding to the
Olympus, which are inconsistent or in conflict serial number on the Product (unless it is a
with or in addition to the terms of this limited model on which Olympus does not place and
warranty, shall not be binding upon Olympus record serial numbers).
3 A detailed description of the problem.
unless reduced to writing and approved by an
4 Sample prints, negatives, digital prints (or files on
expressly authorized officer of Olympus. disk) if available and related to the problem.
When service is completed, the Product will be
returned to you postage prepaid.
76 EN
WHERE TO SEND PRODUCT FOR Provisions of Guarantee
SERVICE 1 “OLYMPUS IMAGING CORP., Shinjuku
See “WORLDWIDE WARRANTY” for the Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,
Tokyo 163-0914, Japan grants a one year World
nearest service center.
Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized
INTERNATIONAL WARRANTY SERVICE repair service station before any repair can
International warranty service is available under be made under conditions of this Guarantee.
this warranty. This Guarantee is valid only if the Guarantee
Certificate and proof of purchase are presented
For customers in Europe at the Olympus repair service station. Please note
that this Guarantee is in addition to and does not
“CE” mark indicates that this product complies
with the European requirements for safety, affect the customer’s legal warranty rights under
health, environment and customer protection. the applicable national legislation governing the
“CE” mark cameras are intended for sales in sale of consumer goods mentioned above.
Europe. 2 This Guarantee does not cover the following
and the customer will be required to pay repair
This symbol [crossed-out wheeled bin WEEE charge, even for defects occurring within the
Annex IV] indicates separate collection of waste Guarantee period referred to above.
electrical and electronic equipment in the EU
a. Any defect that occurs due to mishandling
countries.
(such as an operation performed that is not
Please do not throw the equipment into the
domestic refuse.
mentioned in the Handling Care or other
Please use the return and collection systems sections of the instructions, etc.)
available in your country for the disposal of this b. Any defect that occurs due to repair,
product. modification, cleaning, etc. performed by
anyone other than Olympus or an Olympus
This symbol [crossed-out wheeled bin Directive authorized service station.
2006/66/EC Annex II] indicates separate c. Any defect or damage that occurs due to
collection of waste batteries in the EU countries.
transport, a fall, shock, etc. after purchase of
Please do not throw the batteries into the
the product.
domestic refuse. Please use the return and
collection systems available in your country for
d. Any defect or damage that occurs due to fire,
the disposal of the waste batteries. earthquake, flood damage, thunderbolt, other
natural disasters, environmental pollution and
Provisions of warranty irregular voltage sources.
1 If this product proves to be defective, although it e. Any defect that occurs due to careless or
has been used properly (in accordance with the improper storage (such as keeping the
written Handling Care and Operating instructions product under conditions of high temperature
supplied with it), during the applicable national and humidity, near insect repellents such as
warranty period and has been purchased from naphthalene or harmful drugs, etc.), improper
an authorized Olympus distributor within the maintenance, etc.
business area of Olympus Europa Holding GmbH f. Any defect that occurs due to exhausted
as stipulated on the website: http://www.olympus. batteries, etc.
com this product will be repaired, or at Olympus’s g. Any defect that occurs due to sand, mud, etc.
option replaced, free of charge. To claim under entering the inside of the product casing.
this warranty the customer must take the product h. When the Guarantee Certificate is not
before the end of the applicable national warranty returned with the product.
period to the dealer where the product was i. When any alterations whatsoever are made to
purchased or any other Olympus service station the Guarantee Certificate regarding the year,
within the business area of Olympus Europa month and date of purchase, the customer’s
Holding GmbH as stipulated on the website: name, the dealer’s name, and the serial
http://www.olympus.com. During the one year number.
period of the World Wide Guarantee the customer j. When proof of purchase is not presented with
may turn the product in at any Olympus service this Guarantee Certificate.
station. Please notice that not in all countries 3 This Guarantee applies to the product only; the
such Olympus service station exists. Guarantee does not apply to any other accessory
2 The customer shall transport the product to the equipment, such as the case, strap, lens cap and
dealer or Olympus authorized service station batteries.
at his own risk and shall be responsible for any
costs incurred in transporting the product.
EN 77
4 Olympus’s sole liability under this Guarantee shall a. Any defect that occurs due to mishandling
be limited to repairing or replacing the product. (such as an operation performed that is not
Any liability under the Guarantee for indirect mentioned in the Handling Care or other
or consequential loss or damage of any kind sections of the instructions, etc.)
incurred or suffered by the customer due to a b. Any defect that occurs due to repair,
defect of the product, and in particular any loss modification, cleaning, etc. performed by
or damage caused to any lenses, films, other anyone other than Olympus or an Olympus
equipment or accessories used with the product authorized service station.
or for any loss resulting from a delay in repair or c. Any defect or damage that occurs due to
loss of data, is excluded. Compelling regulations transport, a fall, shock, etc. after purchase of
by law remain unaffected by this. the product.
d. Any defect or damage that occurs due to fire,
Notes regarding Guarantee maintenance earthquake, flood damage, thunderbolt, other
1 This Guarantee will only be valid if the Guarantee natural disasters, environmental pollution and
Certificate is duly completed by Olympus or an irregular voltage sources.
authorized dealer or other documents contain e. Any defect that occurs due to careless or
sufficient proof. Therefore, please make sure improper storage (such as keeping the
that your name, the name of the dealer, the product under conditions of high temperature
serial number and the year, month and date of and humidity, near insect repellents such as
purchase are all completed or the original invoice naphthalene or harmful drugs, etc.), improper
or the sales receipt (indicating the dealer’s maintenance, etc.
name, the date of purchase and product type) is f. Any defect that occurs due to exhausted
attached to this Guarantee Certificate. Olympus batteries, etc.
reserves the right to refuse free-of-charge service g. Any defect that occurs due to sand, mud, etc.
if neither Guarantee Certificate is completed entering the inside of the product casing.
nor the above document is attached or if the h. When this Warranty Certificate is not returned
information contained in it is incomplete or with the product.
illegible. i. When any alterations whatsoever are made
2 Since this Guarantee Certificate will not be re- to the Warranty Certificate regarding the year,
issued, keep it in a safe place. month and date of purchase, the customer’s
* Please refer to the list on the web site: http:// name, the dealer’s name, and the serial
www.olympus.com for the authorized international number.
Olympus service network. j. When proof of purchase is not presented with
this Warranty Certificate.
4 This Warranty applies to the product only; the
For customers in Asia Warranty does not apply to any other accessory
equipment, such as the case, strap, lens cap and
Provisions of warranty batteries.
1 lf this product proves to be defective, although it
5 Olympus’ sole liability under this warranty shall be
has been used properly (in accordance with the
limited to repairing or replacing the product and
written Handling Care and Operating instructions
any liability for indirect or consequential loss or
supplied with it), during a period of up to one
damage of any kind incurred or suffered by the
year from the date of purchase this product will
customer due to a defect in the product, and in
be repaired, or at Olympus’s option replaced,
particular any loss or damage caused to any film
free of charge. To claim under warranty the
or lenses or other equipment or accessories used
customer must take the product and this Warranty
with the product or for any loss resulting from
certificate before the end of the one year warranty
delay in repair, is excluded.
period to the dealer where the product was
purchased or any Olympus authorized service Notes;
station listed in the instructions and request the 1 This Warranty is in addition to and does not affect
necessary repairs. the customer’s statutory right.
2 The customer shall transport the product to the 2 lf you have any queries regarding this Warranty,
dealer or Olympus authorized service station call any of the Olympus authorized service
at his own risk and shall be responsible for any stations listed in the instructions.
costs incurred in transporting the product.
3 This warranty does not cover the following
and the customer will be required to pay repair
charge, even for defects occurring within the one
year period referred to above.
78 EN
Notes regarding warranty maintenance THIS PRODUCT IS LICENSED UNDER THE
1 This Warranty will only be valid if the Warranty AVC PATENT PORTFOLIO LICENSE FOR THE
Certificate is duly completed by Olympus or the PERSONAL AND NONCOMMERCIAL USE
dealer. Make sure that your name, the name of OF A CONSUMER TO (i) ENCODE VIDEO IN
the dealer, the serial number and the year, month COMPLIANCE WITH THE AVC STANDARD (“AVC
and date of purchase are all completed. VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT
2 Since this Warranty Certificate will not be WAS ENCODED BY A CONSUMER ENGAGED
re-issued, keep it in a safe place. IN A PERSONAL AND NON-COMMERCIAL
3 Any request for repair by a customer in same ACTIVITY AND/OR WAS OBTAINED FROM A
country where the product was purchased shall VIDEO PROVIDER LICENSED TO PROVIDE AVC
be subject to the terms of the warranty issued by VIDEO. NO LICENSE IS GRANTED OR SHALL
the Olympus distributor in that country. Where BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
the local Olympus distributor does not issue a INFORMATION MAY BE OBTAINED FROM MPEG
separate warranty or where the customer is not in
LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
the country where the product was purchased the
terms of this worldwide warranty shall apply.
4 Where applicable, this Warranty is valid
worldwide. The Olympus authorized service
stations listed in this Warranty will gladly honor it.
* Please refer to the appended list for the
authorized international Olympus service
network.
Disclaimer of Warranty
Olympus makes no representations or
warranties, either expressed or implied, by or
concerning any content if these written materials
or software, and in no event shall be liable
for any implied warranty of merchantability or
fitness for any particular purpose or for any
consequential, incidental or indirect damages
(including but not limited to damages for loss
of business profits, business interruption and
loss of business information) arising from the
use of inability to use these written materials or
software. Some states do not allow the exclusion
or limitation of liability for consequential or
incidental damages, so the above limitations
may not apply to you.
Trademarks
• IBM is a registered trademark of International
Business Machines Corporation.
• Microsoft and Windows are registered trademarks
of Microsoft Corporation.
• Macintosh is a trademark of Apple Inc.
• The SDHC logo is a trademark.
• All other company and product names are
registered trademarks and/or trademarks of their
respective owners.
• The standards for camera file systems referred to
in this manual are the “Design rule for Camera File
system/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries
Association (JEITA).
EN 79
SPECIFICATIONS
Camera
Product type : Digital camera (for shooting and displaying)
Recording system
Still pictures : Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF))
Applicable standards : Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Sound with still : AAC format
pictures
Movie : MPEG-4AVC/H.264
Memory : Internal memory
SD memory card
SDHC memory card
No. of effective pixels : STYLUS TOUGH-8010/μ TOUGH-8010,
STYLUS TOUGH-6020/μ TOUGH-6020: 14,000,000 pixels
STYLUS TOUGH-3000/μ TOUGH-3000: 12,000,000 pixels
Image pickup device : 1/2.33” CCD (primary color filter)
Lens : STYLUS TOUGH-8010/μ TOUGH-8010, STYLUS TOUGH-6020/
μ TOUGH-6020: Olympus lens 5.0 to 25.0 mm, f3.9 to 5.9 (equivalent to 28 to
140 mm on a 35 mm camera)
STYLUS TOUGH-3000/μ TOUGH-3000: Olympus lens 5.0 to 18.2 mm, f3.5 to
5.1 (equivalent to 28 to 102 mm on a 35 mm camera)
Photometric system : Digital ESP metering system, spot metering system
Shutter speed : 4 to 1/2000 sec.
Shooting range : STYLUS TOUGH-8010/μ TOUGH-8010,
STYLUS TOUGH-6020/μ TOUGH-6020: 0.6 m (2.0 ft.) to (normal)
0.2 m (0.7 ft.) to (W), 0.5 m (1.6 ft.) to (T) (macro mode)
0.03 m (0.1 ft.) to 0.6 m (2.0 ft.) (f=6.7 (fixed)) (super macro mode)
STYLUS TOUGH-3000/μ TOUGH-3000: 0.5 m (1.6 ft.) to (normal)
0.1 m (0.3 ft.) to (W), 0.3 m (1.0 ft.) to (T) (macro mode)
0.02 m (0.07 ft.) to 0.5 m (1.6 ft.) (f=6.5 (fixed)) (super macro mode)
Monitor : 2.7” TFT color LCD display, 230,000 dots
Connector : DC-IN jack, USB connector, A/V OUT jack (Multi-connector)/
HDMI mini connector (type C)
Automatic calendar : 2000 up to 2099
system
Water resistance
Type : Equivalent to IEC Standard publication 529 IPX8 (under OLYMPUS test
conditions), available in the following depths.
STYLUS TOUGH-8010/μ TOUGH-8010: 10 m (32.8 ft.)
STYLUS TOUGH-6020/μ TOUGH-6020: 5 m (16.4 ft.)
STYLUS TOUGH-3000/μ TOUGH-3000: 3 m (9.8 ft.)
Meaning : Camera can normally be used under water at a specified water pressure.
Dust resistance : IEC Standard publication 529 IP6X (under OLYMPUS test conditions)
Operating environment
Temperature : -10 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity : 30 % to 90 % (operation)/10 % to 90 % (storage)
Power supply : One Olympus lithium ion battery* or separately sold AC adapter
*
STYLUS TOUGH-8010/μ TOUGH-8010,
STYLUS TOUGH-6020/μ TOUGH-6020: LI-50B
STYLUS TOUGH-3000/μ TOUGH-3000: LI-42B
80 EN
Dimensions : STYLUS TOUGH-8010/μ TOUGH-8010: 98.3 mm (W) × 63.6 mm (H) ×
23.9 mm (D) (3.9 × 2.5 × 0.9 in.) (excluding protrusions)
STYLUS TOUGH-6020/μ TOUGH-6020: 96.7 mm (W) × 64.4 mm (H) ×
25.8 mm (D) (3.8 × 2.5 × 1.0 in.) (excluding protrusions)
STYLUS TOUGH-3000/μ TOUGH-3000: 95.9 mm (W) × 65.0 mm (H) ×
23.4 mm (D) (3.7 × 2.2 × 0.8 in.) (excluding protrusions)
Weight : STYLUS TOUGH-8010/μ TOUGH-8010: 215 g (7.6 oz)
(including battery and card)
STYLUS TOUGH-6020/μ TOUGH-6020: 178 g (6.3 oz)
(including battery and card)
STYLUS TOUGH-3000/μ TOUGH-3000: 159 g (5.6 oz)
(including battery and card)
EN 81
USB-AC adapter (F-2AC)
Model No. : F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B
Power requirements : AC 100 to 240 V (50/60 Hz)
Output : DC 5 V, 500 mA
Operating environment
Temperature : 0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Dimensions : 50.0 mm (W) × 54.0 mm (H) × 22.0 mm (D) (2.0 × 2.1 × 0.9 in.)
Weight : Approx. 46.0 g (1.6 oz) (F-2AC-1A)/Approx. 42.0 g (1.5 oz) (F-2AC-2A)/
Approx. 44.0 g (1.6 oz) (F-2AC-1B)/Approx. 40.0 g (1.4 oz) (F-2AC-2B)
82 EN
VN678203