Documentos de Académico
Documentos de Profesional
Documentos de Cultura
aspx
Instead, follow the instructions in this document to manually join a computer running
Windows Server 2008 to the Windows SBS network.
System Requirements
Before you can join a computer running Windows Server 2008 to the Windows SBS
network, the computer running Windows SBS must meet the following requirements:
Installed update: "Windows Vista and Outlook 2007 compatibility update" (KB
926505). For information about this update, see the Microsoft Web site
(http://go.microsoft.com/fwlink/?LinkId=75111).
Deployment Scenarios
When you join an additional server to your Windows SBS domain, you can configure
the server either as a "member server" or as an additional domain controller. Member
servers are distinguished from domain controllers by the following:
1 of 6 05/01/2011 14:11
Adding a Server Running Windows Server 2008 to a Windows Small B... http://technet.microsoft.com/en-us/library/cc708131(WS.10).aspx
Note
2. Log on to the computer that is running Windows Server 2008 by using the
local administrator account.
3. Click Start, right-click Computer, and then click Properties. The System
control panel appears.
5. If the User Account Control dialog box appears, confirm that the action it
displays is what you want, and then click Continue.
7. Select Domain, type the name of your Windows SBS domain name, and then
click OK.
8. Type the user name and password for the Windows SBS domain administrator
account, and then click OK.
Note
Note
The autorun feature may attempt to run the server installation program.
If you insert the DVD for the 64-bit version of Windows Server 2008,
an error message appears. Click OK to acknowledge the message, and
then continue with the instructions that appear on the screen.
If you insert the DVD for the 32-bit version of Windows Server 2008,
the installation wizard opens. Close the wizard, and then proceed with
the instructions that appear on the screen.
2. Open a Command Prompt window. To do this, Click Start, click Run, type cmd,
2 of 6 05/01/2011 14:11
Adding a Server Running Windows Server 2008 to a Windows Small B... http://technet.microsoft.com/en-us/library/cc708131(WS.10).aspx
Note
Note
For information about this option, see "AD DS: Read-Only Domain
Controllers" at the Microsoft Web site (http://go.microsoft.com
/fwlink/?LinkId=108239).
4. Install Service Pack 2 for Exchange Server 2003 (SP2 for Exchange Server).
Note
SP2 for Exchange Server is included on the media for Windows SBS 2003
R2. If you are running Windows SBS 2003 with Service Pack 1, you can
download SP2 for Exchange Server from the Microsoft Web site
(http://go.microsoft.com/fwlink/?LinkId=65119).
6. Log on to the computer that is running Windows Server 2008 by using the
local administrator account.
Note
7. Click Start, type dcpromo, right-click dcpromo, and then click Run as
administrator. The Microsoft Active Directory® Domain Services Installation
Wizard appears.
8. Click Next to advance through the wizard until you arrive at the Choose a
Deployment Configuration page.
10. On the Network Credentials page, type the name of your Windows SBS
domain (e.g., contoso.local), and then click Set. The Windows Security dialog
box appears.
11. Type the user name and password for the Windows SBS domain administrator,
click OK, and then click Next.
12. On the Select a Domain page, ensure that the domain name you typed in
3 of 6 05/01/2011 14:11
Adding a Server Running Windows Server 2008 to a Windows Small B... http://technet.microsoft.com/en-us/library/cc708131(WS.10).aspx
13. Click Next to advance through the wizard until you arrive at the Additional
Domain Controller Options page.
14. On the Additional Domain Controller Options page, clear the DNS server
check box, and then click Next until you arrive at the Directory Services
Restore Mode Administrator Password page.
16. Continue through the wizard and accept all remaining default settings.
Post-deployment tasks
After joining a computer running Windows Server 2008 to the Windows SBS network,
you can log on to the server and run the Add Roles Wizard to define the roles that the
server plays in your organization.
For information about how to assign server roles to your server running Windows
Server 2008, go to the Windows Server 2008 online Help, and then search for "Adding
Server Roles and Features."
When you manually join a server to the Windows SBS network, Remote Desktop
Protocol (RDP) is disabled by default.
2. Click Start, right-click Computer, and then click Properties. The System
control panel appears.
4. If the User Account Control dialog box appears, confirm that the action it
displays is what you want, and then click Continue.
Troubleshooting
Your server running Windows Server 2008 does not appear in the list
of servers in the Update Services Management Console.
Important
You can safely ignore this issue. It does not impact the functionality of your
servers or your network.
After joining a computer that is running Windows Server 2008 to the Windows SBS
network, the server might not appear in the list of servers that is displayed in the
Update Services Management Console. Instead, you might see a listing for the
Windows Vista® operating system.
If you want to correct this issue, install Windows Server Update Services (WSUS) 3.0
with Service Pack 1 on the computer that is running Windows SBS.
4 of 6 05/01/2011 14:11
Adding a Server Running Windows Server 2008 to a Windows Small B... http://technet.microsoft.com/en-us/library/cc708131(WS.10).aspx
For more information about running WSUS 3.0 on Windows SBS, see "Installing
Windows Server Update Services 3.0 on Windows Small Business Server 2003" at the
Microsoft Web site (http://go.microsoft.com/fwlink/?LinkId=92399).
2. In the console tree, expand the node for your server, expand the Server node,
expand the All Computers node, and then click Update Services Server
Computers.
3. Your server should appear in the details pane as Windows Server 2008. If it
does not appear, or if you see a listing for Windows Vista, install WSUS 3.0
with Service Pack 1.
You cannot log on to Outlook Web Access from your server that is
running Windows Server 2008.
If you log on to a server that is running Windows Server 2008 by using an account
that is based on the Windows SBS Admin template and then you try to access your
organization's Outlook® Web Access site, the following error message may appear:
"Your Web browser is configured not to run script or doesn't support script in Web
pages. Check your browser settings, or use a browser that can run script."
The Outlook Web Access site opens, but it does not display your e-mail and calendar
information as expected. Additionally, the user interface does not function properly.
This error occurs because the server blocks access to unknown and untrusted users.
To resolve this issue, add the Outlook Web Access site to the list of sites that the
Microsoft Internet Explorer® browser trusts on the Windows Server 2008 server.
3. On the Security tab, select the Trusted sites zone, and then click Sites.
6. Navigate to the Outlook Web Access site, and then log in. Your e-mail and
calendar items are now accessible, and the site functions properly.
Tags :
5 of 6 05/01/2011 14:11
Adding a Server Running Windows Server 2008 to a Windows Small B... http://technet.microsoft.com/en-us/library/cc708131(WS.10).aspx
Tags : contentbug
© 2011 Microsoft Corporation. All rights reserved. Terms of Use | Trademarks | Privacy Statement
6 of 6 05/01/2011 14:11