Documentos de Académico
Documentos de Profesional
Documentos de Cultura
• SIGTRAN Overview
• SCTP Overview
• Comunicación SGP – ASP
• Comunicación IPSP – IPSP
• Pasos de configuración
• Troubleshoot Básico
SIGTRAN
SIGTRAN OVERVIEW
SIGTRAN Overview
•SIGTRAN o SIGnaling TRANsport más que un protocolo es un
stack de varios protocolos, es un conjunto de adaptaciones
definido por la IETF para interoperabilidad entre SS7 e IP.
• Soporta transmisión de mensajes de Switch Core Network
tradicional a través de la red IP.
• Soporta todas las primitivas de comunicación entre capas
de la señalización SCN.
• Garantiza que los mensajes de señalización del SCN sean
usados sin modificaciones.
• Cumple con requerimientos especiales de transmisión
incluyendo funciones basadas en protocolos de transmisión
IP.
Stack de SIGTRAN
SIGTRAN
SCTP OVERVIEW
SCTP Overview
•SCTP es un protocolo de transporte confiable que opera sobre redes
de paquetes potencialmente poco confiables como IP.
• SCTP esta diseñado para transferir señalización narrowband SCN
sobre las redes IP.
• Comparado con TCP, SCTP ofrece mas alta confiabilidad, tiempo real
y funcionalidades de multi-homing.
• Soporte para transmisión ordenada y desordenada de información
de señalización.
• Varios streams pueden ser establecidos en una asociación y los
streams no interfieren entre si.
• La asociación debe pasar la autenticación a través de COOKIE antes
del establecimiento para garantizar la seguridad.
SCTP Association
•Una asociación SCTP es una relación entre dos puntos de
comunicación. La aplicación de SCTP es el
establecimiento y mantenimiento de una asociación. Una
asociación SCTP usa los siguientes parámetros: puerto de
origen, dirección IP de origen, puerto de destino y
dirección IP de destino. Si uno de estos parámetros es
diferente, significa que una nueva asociación debe ser
establecida. Una asociación puede tener varios caminos
lógicos; este tipo de conexión se llama una conexión con
multi-homing, este tipo de funcionalidad no existe en
TCP. Por esto, una asociación SCTP es menos susceptible a
fallas que TCP.
SCTP Association
SCTP multi-homing
•En la terminología IP, un host esta en multi-homing si puede
dirigirse a varias direcciones IP. Para aprovecharse de esta
funcionalidad el host también debe soportar múltiples
interfaces de red, cada una de estas debe configurarse para
trabajar en una subred diferente. El multi-homing SCTP es
utilizado solo para recuperar fallas de red, no se utilizad por
ejemplo para balanceo de carga. La implementación de SCTP
soporta dos caminos por asociación. Normalmente la
información es enviada a través del camino primario. Si ocurre
una falla de red en el camino primario, SCTP reenvía la
información que no pudo ser procesada por el camino
secundario automáticamente. Todo este procedimiento se
hace a nivel de transporte siendo transparente a nivel de
aplicación.
SCTP stream
•SCTP proporciona la funcionalidad de tener
múltiples streams en una asociación SCTP. SCTP usa
el método de streaming para el ordenamiento de
mensajes donde cada secuencia de mensajes
ordenada independientemente se llama un stream.
La razón principal para el uso de streams es evitar el
llamado HOL (Head of Line Blocking).
INFORMACIÓN ADICIONAL
M3UA message example
Transición de estados de un link M3UA
Asp Active/Asp Active Ack
M3UA_LINK_ M3UA_LINK_ACTIVE
INACTIVE Asp Inactive/Asp Inactive Ack/
Asp Up or
SCTP-RI Asp Up Ack Asp Down or SCTP
Asp Down Ack CDI
or SCTP-RI
SCTP-CDI
PASOS DE CONFIGURACIÓN
Pasos de configuración
Pasos de configuración
• Crear el Association Set
• ZOYC:MGW123:C;
•
• Crear las Asociaones para ese Association Set
• ZOYA:MGW123:SIGU,0,:SCTP:;
• ZOYA:MGW123:SIGU,1,:SCTP:;
• ZOYA:MGW123:SIGU,2,:SCTP:;
•
• Agregar las direcciones IP de transporte a las asociaciones SCTP
• ZOYP:M3UA:MGW123,0:" 172.18.21.18"," 172.18.21.82":"131.228.45.4",24,"132.228.46.4",24,;
• ZOYP:M3UA:MGW123,1:" 172.18.21.4 ","172.18.21.68":"131.228.45.5",24,"132.228.46.5",24,;
• ZOYP:M3UA:MGW123,2:" 172.18.21.12","172.18.21.76":"131.228.45.6",24,"132.228.46.6",24,;
•
• Verificar los datos en el Association Set:
• ZOYI:NAME=MGW123:A;
•
Pasos de configuración
• Crear el SS7 Signaling Link Set a la Asociación IP llamada MGW123.
• ZNSP:NA0,<signalling link set point code>, <signalling link set name>,<signalling link
number>,:MGW123;
•
• Crear el Signaling Route Set:
• ZNRC:NA0:<signalling point code>, <signalling route set name>;
•
• Activar las Asociaciones SCTP:
• ZOYS:M3UA:MGW123,0:ACT;
• ZOYS:M3UA:MGW123,1:ACT;
• ZOYS:M3UA:MGW123,2:ACT;
•
• Activar los Signaling Links:
• ZNLA:<signalling link number>;
• ZNLC:<signalling link number>, ACT;
•
• Activar los Signaling Route Sets:
• ZNVA:NA0,>signalling point code>:,;
• ZNVC:NA0,<signalling point code>:,:ACT;
Parámetros de M3UA
•Los parámetros de M3UA se pueden modificar con el comando ZOYN de ser
necesario en caso de incompatibilidades con equipos de otros vendor.
TROUBLESHOOT BÁSICO
Troubleshoot Básico
• 1273 ASP ACTIVATION FAILED
• 3156 ASSOCIATION ROUTING FAILURE
• 3155 ERRONEOUS M3UA MESSAGE
• 3159 SCTP ASSOCIATION LOST
• 3379 SCTP PATH FAILURE
Troubleshoot Básico
• SCTP association fails
• Steps
• Check the alarms (AHO).
Check the following alarm with the AHO command: 3159.
If there are any alarms, follow the alarm instructions.
• Check the state of association and association set.
• Check the SCTP error counters and SCTP statistics (QRS).
• Check the static IP route configuration.
• Check the static IP route configuration with the QKB command.
• Check the availability of the peer IP address with PING (QRX).
• Use the QRX command for IPv4
• Check the LAN cables.
• Check the LAN cables and their connections.
• Check the IP network configuration.
• Check the router configuration and the site level LAN switch
configuration.
Troubleshoot Básico
•3159 SCTP ASSOCIATION LOST
•Meaning
•A SCTP association has terminated abnormally, that is, not by a normal abort
or shutdown procedure of the SCTP. The SCTP has terminated the association due to
the lack of the SACK chunks or HEARTBEAT ACK chunks from the peer endpoint, so the
reason for the termination is either in the underlying IP network or in
the peer endpoint (for example, reset). If this association is used for the M3UA
protocol, this association is included in an association set specified in the 2nd
supplementary information field. If this association is the only available in the
association set, the system sets also alarm 2070, LINK SET UNAVAILABLE. If there
remains available associations in the association set, the signaling traffic to the
network element reachable via the association set is distributed to the remaining
associations in the set. In this case the signal transmission capacity may
be somewhat decreased. If this association is used for the IUA protocol, this alarm
means that the D channels using this association are out of use.
Troubleshoot Básico
• Path of SCTP association fails
• Steps
• Check the alarms (AHO).
• Check the following alarm with the AHO command: (3379).
• Check the state of association or association set.
• Check the SCTP error counters and SCTP statistics (QRS).
• Check the static IP route configuration.
• Check the availability of the peer IP address via failed path with PING (QRX).
• Check the LAN cables.
• Check the LAN cables and their connections.
• Check the IP network configuration.
• Check the router configuration and the site level LAN switch
configuration.
Troubleshoot Básico
•3379 SCTP PATH FAILURE
•Meaning
•
Two path to each SCTP association are normally created in the SCTP association
establishment. If the primary path fails then the traffic is automatically transferred via
a secondary path. The traffic is not affected. If the secondary path fails then the traffic
is transferred via the primary path normally and only the redundant connection is lost.
If both path of association are lost then the alarm is set twice; first time for the
primary path and second time for the secondary path.
•The alarm indicates a failure in the SCTP association. The system possibly takes into
use an alternative path or the alternative path is lost.