Documentos de Académico
Documentos de Profesional
Documentos de Cultura
By removing these four screws it can also be used without its tilting
functionality in order to drill straight holes.
Right now you can see me drill a hole on an edge at a 45 degree
angle.
It will also be useful for milling on my 3D Router. I've designed a
fast clamping system with adjustable depth.
Let's take a look at how I built it. First, we cut all the pieces
according to the cutting list.
We make a rebate with the 3D Router.
Now I'm preparing the piece that will slide along the rebate I just
made. Although this piece must fit in tightly, it should also be able to
slide easily. I'll sand this side to prevent friction when sliding it.
I'll machine these pieces to place the threaded insert. First I'll
screw in a couple of screws so that the pieces won't move when
pressuring them with the clamps due to the viscosity of the glue.
Using an angle grinder, I'll make a little rebate on this threaded rod
and machine a washer to insert in said rebate.
Although it has to fit tightly on the rebate, it should be able to rotate
once it's in.
Fasteners:
2xM6 50mm Allen Flat Head Screw
2xM6 Threaded Insert
1xM10 Threaded Insert
1xM8 Washer (24mm diameter, 2mm Thickness)
1xM10 200mm Threaded Rod
2x Flat Hinges
Angle Drill Press Vise ISO
8 2
10
3
5
Top 1/2 Scale
Top X Ray 1/2 Scale
240,0 mm
15,0 mm
90,0 mm
200,0 mm
250,0 mm
150,0 mm
200,0 mm
Front Full Scale 9,0 mm
150,0 mm
156,2 mm
18,0 mm 100,0 mm
30,0 mm
25,0 mm
250,0 mm
Front X Ray Full Scale
Right
Threaded Insert
Stop Washer
M6 Threaded Insert
100,0 mm
24,0 mm
32,0 mm
9,0 mm
Detail1
Detail2
Detail3
Detail4
M8 Washer
Hard Wood
Stop Washer
120,0 mm
10,0 mm
240,0 mm
25,0 mm Holes for Clamps
156,2 mm
156,2 mm
6,0 6,0
mm mm
46,0 mm 46,0 mm
Printable Template2
200,0 mm
36,0 mm
5,0 mm
128,0 mm
150,0 mm
40,0 mm
55,0 mm
50,0 mm
Printable Template3
M8 Washer Front
~ 26,0 mm
Front 100,0 mm
8,0 mm
10,0 mm
30,0 mm
30,0 mm
24,0 mm
20,0 mm 6,5 mm
Left
Top
2,0 mm
40,0 mm
12,0 mm
18,0 mm
90,0 mm
Printable Template4
40,0 mm
18mm Hard Plywood x2
25,0 mm
Front
10,0 mm
100,0 mm
24,0 mm
30,0 mm
20,0 mm
10,0 mm
Front
30,0 mm
36,0 mm
18mm Hard Plywood
18,0 mm
5,0 mm
2,0 mm
9,0 mm
9,0 mm
Top 40,0 mm
5,0 mm
50,0 mm