485 Ch. 5 / Bandpass Communtcaton Systems
21am for the transmitters and receives. What
quadrature carrier mi
cchannel null bandwidth, 8? How docs th
dat
‘channel frequency of 1800 Hz
(a) Design a 2400-bitsec QPSK transmis
Show that the spectrum of this signal
and 6-dB bandwidths
_—. (b) Repeat part (a) forthe case of 4800-
5-17 Assume that a telephone
channel bandwidth is 2700 Hz and the midchanne! f
Design a 16-symt
Ss
appropriate rolloff factor r and indicate the absolute
bandwidth, Discuss why you selected
used.
6-dB QAM signal
re particular value of r that you
5-20 Design a receiver (i.e., determine the block di
«determine the block diagram) that will det
data on a QAM waveform having an Mf = 16 point
Fig. 5-14. Explain how your receiver works. (
ite Study Fig.
5.21 Using MCAD, plo the QPSK and OQPSK
“ in-phase ad quad
modulation waveforms for the data stream " “wee
fol.
5-22 Calculate and plot the PSD for a CCITT V.22bis 2400-bit/sec
‘modem operating in the originate mode and s
Table C-12 for the modem specifications.
5-23 (a) Fig. 5-16 shows the x(1) and y(0) waveforms
these waveforms for the case of Type I MSK
(b) Show that (5-476) is the Fourier transform of (5-474)
‘Type II MSK. Redraw
the overall aggregate ay
lex system as a function of oe
Problems 407
Jing, MathCAD, plot the MSK Type [ modulation waveforms x(0). (0.
the MSK signal s(). Assume thatthe input data stream is,
tht
tL AL
“This data stream i the differentially
we generation of FFSK is equival
ing ofthe data input, FFSK has a one-to-one
between the input data and the mark and space frequencies.
to Type I MSK wi
jonship
5-26 Using MathCAD, plot the MSK Type II modulation waveforms x(9), y().
the MSK signal s). Assume thatthe input data stream is,
‘Assume that T, = 1 and f- has a value such that a good plot of s(t) is
obtained for a reasonable amount of computer time.
5-27 Show that MSK can be generated by the serial method of Fig. 5-18e. That
is, show that the PSD for the sizn iput of the MSK bandpass
is the MSK spectrum as described by (5-48) and
is forall of the signals shown in Table
analog baseband sig
tion system (block diagram) that
sources over the telephone channel using:
(a) FDM with SSB subcarriers.
(b) TDM using PAM with appropriate frequency translation and raised
cosine-rollof filtering.
Show the block diagrams of the complete system, including the transmis-
and reception portions. Include the bandwidths of the sig
nals at the various points in the systems.
5-30 Give more detailed block diagram of a group frequency-