Documentos de Académico
Documentos de Profesional
Documentos de Cultura
CARACTERISTICAS DEL EQUIPO: GRÚA HIDRAULICA TELESCOPICA SOBRE NEUMATICOS (75 TON @ 9 ft radio)
MARCA: LINKBELT
CAPACIDAD: 75 TONELADAS
MAX. WLL BLOCK PRINCIPAL: 60 TON
MAX WLL BOLA AUXILIAR: 8.5 TON
MODELO: HTC-8675
NÚMERO DE SERIE: F2J5-7798
NÚMERO ECONÓMICO: GAV-562
Las observaciones en relación a la revisión física, documental y pruebas se encuentran en el reporte de inspección
correspondiente con el número RI-940-/20 emitido por el inspector siempre y cuando cumplan con los mantenimientos
preventivos recomendados por el fabricante.
Specifics Comments:
CARACTERISTICAS DE LA ESTRUCTURA
ESPECIFICACIONES DE SU ESTRUCTURA: BRAZO TELESCOPICO
ARREGLO DE LA ESTRUCTURA: SISTEMA TELESCOPICO DE 3 SECCIONES
LONGITUD DE PLUMA: 127 ft
Aprobó
Ing. Jose Manuel Hernandez Altamirano
2
CABLES:
- PRINCIPAL 3/4” Ø AUX. 3/4” Ø
- SE VERIFICO EL ADECUADO ARREGLO PARA SU OPERACIÓN SEGURA Y EFICIENTE
- SE INSPECCIONARON FISICAMENTE NO ENCONTRANDO DAÑOS EN SU LONGITUD.
DOCUMENTACION
EXISTE BITACORA DE MANTENIMIENTO: SI
FECHA DE ULTIMA INSPECCION: SIN DATO
FECHA DE ULTIMA PRUEBA DE CARGA: SIN DATO
PRUEBAS NO DESTRUCTIVAS: NO
PROGRAMAS DE MANTENIMIENTO: SI
OBSERVACIONES SOBRE EL MANTTO. GRAL: BUENO
3
Página
Aprobó
Ing. Jose Manuel Hernandez Altamirano
Mobile Crane, Overhead/Hoist Rigging and Forklift Inspector
Operational Security in Lifting Equipment
Página 4 de 5
CONDICIONES DE LA PRUEBA
CARACTERISTICAS DEL EQUIPO: GRÚA HIDRAULICA TELESCOPICA SOBRE NEUMATICOS, MARCA LINKBELT, CON
CAPACIDAD DE 75 TONELADAS, MODELO HTC-8675, NUMERO DE SERIE F2J5-7798,
CON NÚMERO ECONÓMICO GAV-562.
RESULTADO: SATISFACTORIO
COMENTARIOS: La prueba de carga fue realizada bajo los parámetros de seguridad de longitud de pluma (radio)/carga
permitidos y establecidos en la tabla de capacidades de carga del fabricante, por lo que se considera que su integridad mecánica fue
probada a la capacidad total de diseño la grúa.
Aprobó
Ing. Jose Manuel Hernandez Altamirano
Mobile Crane, Overhead/Hoist Rigging and Forklift Inspector
4
__________________________
JOSE MANUEL HERNANDEZ ALTAMIRANO
5
Página