Documentos de Académico
Documentos de Profesional
Documentos de Cultura
to the left to decrease. *Note: Please refer to your cell phone’s prod- subject to the following two conditions: (1) this device may not cause
Multi-function Button uct user manual for Voice Dialing, Call & Redial
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
CALL WAITING* - With a call in progress you will hear 2 short tones, then: functionality and settings.
Changes or modification to this device are not approved by the party
responsible for compliance and will void the warranty and user’s
Mini USB 1. Press and hold the 3-Way button to the right for 3 seconds to put the current call on authority to operate this device.
hold and answer the waiting call.
Charging Port Note: To cancel the second call and return to the “call on hold”, press the cancel but-
ICONS
With Cover ton once. When the VRBT300V com- A solid Battery Power Lev-
Visor Clip 2. Press and hold the 3-Way button to the left for 3 seconds to cancel the current call pletes a Bluetooth® con- el Icon will display when
and answer waiting call. nection, the Bluetooth® the battery is full; One line
MUTE - Press and hold for 3 seconds to Mute or Unmute. icon will be on. on Battery Power Level
ENTER CALL LOG BOOK - Press Once icon will display when the
When opening the Call battery is half full; only the
Front of Unit TO CHOOSE A CALL LOG BOOK - Move to Left or Right
Logs, the Call Log Book battery frame will remain
Adjustable LCD Screen CANCEL BUTTON icon will be on. when the battery is dis-
END CALL - Press Once charged.
REJECT CALL - When you are on a previous call, press once to reject an incoming call. When there is an incoming When entering the Re-
EXIT CALL LOG BOOK - Press Once call, the Incoming Call icon ceived Call Log, the Re-
will be on while the backlit ceived Call icon on the
Earbud PAIRING WITH A BLUETOOTH® ENABLED CELL PHONE LCD and the Call Log Book
LCD flashes
1. The VRBT300V and the Bluetooth® enabled cell phone should be within a distance icon will be on.
of 3 feet (1 meter). The Missed Call icon
2. With the VRBT300V OFF, press and hold the Multi-Function button until you hear 2 will be on when a call is When entering the Dialed
Mini USB
beeps. The Red & Blue LEDs will flash indicating the unit is ready to be paired. missed and until that call is phone numbers in the
Charging Port
3. The Bluetooth® cell phone will search for nearby Bluetooth® devices. The cell phone acknowledged. Phonebook, the Outgoing
With Cover will display the “VRBT300V” in the list of Bluetooth® devices. If you are using a “dongle”
12 Volt Adaptor With Mini Usb Plug Side of Unit Call icon on the LCD and
type Bluetooth® adaptor, follow the manufacturer’s instructions for that device. the Call Log Book icon will
When checking a phone
4. Select “VRBT300V” to add this Bluetooth® device into the list of paired devices. be on.
number in the Missed Call
5. Enter in the PIN Code “0000” and your mobile phone will show that pairing is com-
IMPORTANT INFORMATION & PRODUCT MAINTENANCE Log, the Missed Call icon
plete.
• Store in a cool, dry place; use clean soft cloth to clean the surface of Bluetooth® car kit. and the Phonebook icon
• Do not expose to high or extremely low temperatures, or to dust. 6. If pairing is successful, user will hear a long BEEP and the Blue LED(cancel) will flash
will be on.
• Do not open VRBT300V. Non-professional maintenance may cause damage, and will void the warranty. about every 3 seconds.
• Do not operate the VRBT300V roughly, e.g knocking, bumping.
• Do not short circuit the charging port of the VRBT300V; a short circuit will cause damage to the battery. CALLER ID DISPLAY
• Use original accessories only; any damage caused by using other accessories will void the warranty. ©2008 Intellectual Solutions Inc., All rights reserved. The Bluetooth® word mark and logo are owned by the Bluetooth SIG, Inc. and any use
The LCD will flash ON & OFF while displaying the phone number of the incoming call.
• If the VRBT300V does not turn on, please recharge the battery. of such marks is under license. Other trademarks and trade names are those of their respective owners. All designs, logos and images are the
The phone number of the incoming call will be displayed on the LCD. exclusive property of Intellectual Solutions Inc. and/or its affiliates. U.S and Foreign Patents Pending. 041008 Printed in China 00000