Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Make sure you have the following: D Connect one end of an A Launch the web browser on E Proceed to the appropriate
Ethernet network cable the PC. instructions for your Internet
• An active Internet connection (included) to the ETHERNET Connection Type: DHCP,
• An active Internet phone service account and its settings port of the Voice Gateway. B Enter 192.168.0.1/ Static IP, or PPPoE.
• cable/DSL modem Connect the other end to advanced in the Address
• One computer for configuration of the Voice Gateway the Ethernet port of your PC. field (192.168.0.1 is the DHCP
• Analog telephone or fax machine with an RJ-11 phone cable D default local IP address of
E Connect one end of a the Voice Gateway). Then 1 Select DHCP for the
different Ethernet network press the Enter key. Connection Type.
cable to the INTERNET port
C
1
of the Voice Gateway. If your Internet Telephony 2 If you use a cable modem,
you may need to configure
Connect the Voice Gateway Connect the other end to
your cable/DSL modem.
Service Provider (ITSP) did
not supply a password, you the MAC Clone Settings.
E will not see a login screen. (Contact your ISP for more E
F Power on the broadband Proceed to step D. information.)
A Power off your network modem.
Enable MAC Clone Service.
devices, including your
G
If your ITSP supplied a C
modem and PC. Connect the included password, you will see a If your service uses a
specific PC MAC address,
MAC Clone Settings
power adapter to the Voice login screen. In the User
B Connect the RJ-11 phone Gateway’s power port, and
then plug the power
Name field, enter user, the then select yes from the
Enable MAC Clone Service
cable (included) to the default user name for user
adapter into an electrical access (this cannot be setting. Then enter the PC’s
Voice Gateway’s LINE port MAC address in the Cloned
Package Contents and your telephone wall outlet. The power LED on the
front panel will light up as
G changed). Then enter the
password supplied by your MAC Address field.
jack.
• Voice Gateway with Router soon as the Voice Gateway ITSP.
• Ethernet Cable
C Connect one end of a B powers on.
3 Click Submit All Changes.
• RJ-11 Phone Cable
different RJ-11 phone cable D The Router - Status screen
• Power Adapter
to the Voice Gateway’s H Power on your PC. will appear. Click the WAN
Static IP
Static IP
• User Guide on CD NOTE: Make sure your PC’s
• Quick Installation PHONE port. Connect the Setup tab. 1 Select Static IP for the
Ethernet adapter is set to obtain an IP
other end to your analog address automatically. For more Connection Type.
telephone or fax machine. information, refer to Windows Help.
field. D Refer to the following table that lists actions, commands, menu interface.
gateway IP address. Use the * (star) key
when entering a decimal point.
choices, and descriptions. After you select an option, press the # * Follow these instructions to enter
Check Network Mask 120 Hear the network or subnet mask
3 Click Submit All Changes. (pound) key. To exit the menu, hang up the telephone. (or Subnet Mask) assigned to the Voice Gateway.
Set Primary DNS 161 First, set the Internet Connection Type to the password.
Server IP Address static IP address; otherwise, you will
hear, “Invalid Option,” if you try to set the
If the Voice Gateway is pre- Using the Interactive Voice Response Menu Check Gateway IP 130 Hear the IP address of the Voice Gateway • A, B, C, a, b, or c — press 2.
IP address of the primary DNS server.
configured by your ITSP, then you
Address (usually the network router).
Use the * (star) key when entering a • D, E, F, d, e, or f — press 3.
do not need to change any of the While entering a value, such as an IP address, you may exit without entering Check MAC Address 140 Hear the MAC address of the Voice decimal point. • G, H, I, g, h, or i — press 4.
default voice settings. Refer to the any changes. Press the * (star) key twice within half a second. Otherwise, Gateway in hexadecimal string format. • J, K, L, j, k, or l — press 5.
Set the Mode 201 Router/NAT If the Voice Gateway acts as the router
documentation supplied by your the * will be treated as a decimal point or dot. • M, N, O, m, n, or o — press 6.
Check Firmware 150 Hear the version number of the firmware Mode - Press 0. for your network, use the router/NAT
service provider for more Version running on the Voice Gateway. Bridge/Switch mode. • P, Q, R, S, o, q, r, or s — press 7.
information. After entering a value, such as an IP address, press the # (pound) key to Mode - Press 1. • T, U, V, t, u, or v — press 8.
indicate you have finished your selection. To save the new setting, press 1. Check Primary DNS 160 Hear the IP address of the primary DNS If your network already has a router, use • W, X, Y, Z, w, x, y, or z — press 9. For additional information or troubleshooting
If you want to change the settings To review the new setting, press 2. To re-enter the new setting, press 3. To
Server IP Address (Domain Name Service) server. the bridge/switch mode. • All Other Characters — press 0. help, refer to the User Guide, which is
for your Internet phone service, cancel your entry and return to the main menu, press * (star). Check Internet Web 170 Hear the port number of the Internet Web Enable/Disable WAN 7932 Enable - Use this setting to enable or disable WAN available on the Linksys website. Contact
refer to the User Guide, which is Server Port server used for the Web-based Utility. Access to the Press 1. access to the Web-based Utility. (This For example, to enter the your Internet Telephony Service Provider for
available on the Linksys website. For example, to enter the IP address 191.168.1.105 by keypad, press these Web-based Utility Disable - Utility lets you configure the Voice password phone@321 by further support.
Check Local IP 210 Hear the local IP address of the Voice
keys: 191*168*1*105. Press the # (pound) key to indicate that you have Address Gateway.
Press 0. Gateway.) keypad, press these keys:
746630321. Then press the # Linksys Website
If you want to configure network finished entering the IP address. Then press 1 to save the IP address or press Manual Reboot 732668 After you hear, “Option successful,” hang
(pound) key to indicate that you http://www.linksys.com or
settings using the Interactive Voice the * (star) key to cancel your entry and return to the main menu. Set Internet 101 DHCP - Press 0. Select the type of Internet connection up the phone. The Voice Gateway will
http://www.linksys.com/support
Response Menu, refer to the next
Connection Type Static IP - you are using. Refer to the automatically reboot. have finished entering the
Press 1. documentation supplied by your Internet
section. If the menu is inactive for more than one minute, the Voice Gateway will PPPoE - Press 2. Service Provider (ISP).
password. To cancel your entry Linksys is a registered trademark or trademark of
time out. You will need to re-enter the menu by pressing ****. and return to the main menu, Cisco Systems, Inc. and/or its affiliates in the U.S.
press * (star). and certain other countries. Copyright © 2006
Cisco Systems, Inc. All rights reserved.
SPA3102-QI-60613A DF