Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Fig. 2
Las obturaciones incorporadas son de caucho acrilonitrilo- The seals are made of Nitrile-Butadiene-Rubber (NBR),
butadieno (NBR), material resistente al aceite y al desgaste y están which is resistant to oil and wear and are reinforced with sheet
reforzadas con una chapa de acero. La temperatura de servicio va steel, The operational temperature range is -40°C to +100°C, and
de -40°C a +100°C y, sólo por breves intervalos, puede alcanzar los up to +120°C just for short periods. The seal lip applies a slight
+120°C. El labio de la obturación ejerce una ligera presión contra pressure on a special smooth groove on the inner ring. Likewise
104
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
un chaflán liso en el aro interior. Como para aquellos de diseño for the basic design version, these bearings have a cylindrical
básico, estos rodamientos se fabrican tanto con agujero cilíndrico bore and a tapered bore (taper 1:12). Before mounting, the se-
como también cónico (conicidad 1:12). Los rodamientos obturados, aled bearings should not be washed or heated to temperatures
antes del montaje, no se deberán lavar ni calentar a temperaturas above +80°C; the designation suffix is 2RS.
superiores a los +80°C; el sufijo de la designación es 2RS.
RODAMIENTO CON ARO INTERIOR MÁS ANCHO BEARINGS WITH WIDER INNER RING
Son rodamientos específicos para ejes realizados por They are specific drawn bearings for shafts; the ease of
trefilado. La facilidad en el montaje y en el desmontaje constituyen assembly and disassembly are guaranteed by the special to-
una garantía de las particulares tolerancias del agujero. Se fijan lerances of the bore, They are fitted axially on the shaft thanks
axialmente en el eje gracias a un pasador o un tornillo (Fig. 3) que to a pin or screw (Fig. 3), which in turn fits in the recess on one
a su vez se introduce dentro de la cavidad prevista en un lado del side of the ring so that the latter does not turn on the shaft.
aro, en modo tal que esté último no gire en el eje.
Fig. 3
Fig. 4
DIMENSIONES DIMENSIONS
Las dimensiones generales de los rodamientos ISB® de bolas The overall dimensions of ISB® self-aligning ball bearings
a rótula respetan la norma ISO 15:1998. comply with standard ISO 15:1998.
TOLERANCIAS TOLERANCES
Los rodamientos ISB® de bolas a rótula se fabrican ISB® self-aligning ball bearings are usually manufactured
generalmente con tolerancias normales de conformidad con la norma with Normal tolerances pursuant to ISO 492:2002. The versions
ISO 492:2002. Constituyen una excepción las versiones con aro más with wider inner ring are an exception and their bore belongs
ancho, que cuentan con un agujero realizado con tolerancia JS7. to tolerance class JS7.
DESALINEACIÓN MISALIGNMENT
Pueden verificarse desalineaciones entre el aro interior y el Misalignments could occur between the inner ring and
exterior; las mismas sin embargo no inciden negativamente sobre the outer ring, but they do not have a detrimental effect on
las prestaciones, en virtud de la forma constructiva que caracteriza performance thanks to their constructional design, which
estos rodamientos. characterises such bearings.
105
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
JAULAS CAGES
Los rodamientos ISB® de bolas a rótula, en base a las ISB® self-aligning ball bearings, based on the size and
dimensiones y a las series, se suministran con las siguientes jaulas: series, are supplied with the following cages:
t Jaula de chapa monobloque de acero (Fig. 5a), t Single-piece pressed sheet steel cage (Fig. 5a),
t Jaula de chapa de acero en dos partes (Fig. 5b), t Two-piece sheet steel cage (Fig. 5b),
t Jaula moldeada por inyección en poliamida 6,6 reforzada con t Injection moulded cage made of polyamide 6,6 with fibre-
fibra de vidrio, sufijo TN9 (Fig. 5c), glass reinforcement, centred on the balls, with suffix TN9
(Fig. 5c),
t Jaula mecanizada de latón (Fig. 5d). t Solid machined brass cage (Fig. 5d).
106
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
107
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
55 100 21 27,05 10,39 6885 8100 0,71 1211 TN9 1211 KTN9
100 25 38,22 13,13 6502,5 7650 0,81 2211 TN9 2211 KTN9
120 29 49,69 17,64 5737,5 6750 1,6 1311 TN9 1311 KTN9
120 43 74,58 23,52 5737,5 6750 2,1 2311 2311 K
60 110 22 30,58 11,96 6502,5 7650 0,9 1212 TN9 1212 KTN9
110 28 47,82 16,66 6120 7200 1,1 2212 TN9 2212 KTN9
130 31 57,33 21,56 4819,5 5670 1,95 1312 TN9 1312 KTN9
130 46 85,36 27,93 5355 6300 2,6 2312 2312 K
65 120 23 34,40 13,72 5355 6300 1,15 1213 TN9 1213 KTN9
120 31 56,06 19,60 5355 6300 1,45 2213 TN9 2213 KTN9
140 33 63,70 24,99 4590 5400 2,45 1313 TN9 1313 KTN9
140 48 93,69 31,85 4819,5 5670 3,25 2313 2313 K
70 125 24 35,08 14,31 5355 6300 1,25 1214 TN9 1214 KTN9
125 31 43,32 16,66 5125,5 6030 1,5 2214 2214 K
150 35 72,62 26,95 4590 5400 3 1314 1314 K
150 51 108,78 36,75 4590 5400 3,9 2314 2314 K
108
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
109
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
110
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
111
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
112
RODAMIENTOS DE BOLAS A RÓTULA SELF ALIGNING BALL BEARINGS
113
Rodamientos rígidos de bolas
RODAMIENTOS RÍGIDOS DE UNA HILERA DE BOLAS SINGLE ROW DEEP GROOVE RADIAL BALL BEARINGS
ISB® produce diversos tipos de rodamientos rígidos de ISB® produces various types of single row deep groove
una hilera de bolas, identificados por especificas características radial ball bearings, which differ in terms of specific technical
técnicas y peculiares aplicaciones mecánicas. En virtud de las characteristics and of peculiar mechanical applications. In view
amplias posibilidades propuestas al comprador, los rodamientos of the assortment offered to purchasers, the single row deep
rígidos de una hilera de bolas se pueden subdividir en tres grupos: groove radial ball bearings can be split-up into three groups:
t Rodamientos estándar t Standard bearings
t Rodamientos con juntas t Sealed bearings
t Rodamientos ranurados para el aro de fijación (con o sin aro t Bearings with snap ring grooves (with or without snap ring).
de fijación).
Los rodamientos rígidos de una hilera de bolas, siendo Seeing as the single row deep groove radial ball bearings
estructuralmente simples y no desmontables, no presentan are structurally simple and not separable, they do not involve any
exigencias específicas de mantenimiento, además, se presentan maintenance requirements in particular. They are resistant and
resistentes y particularmente idóneos para prestaciones de particularly suited for high speed outputs and are consequently
velocidad elevada, resultando por este motivo fiables y versátiles reliable and versatile in their possible mechanical applications.
en sus posibles aplicaciones mecánicas. Due to the fact that the single row deep groove radial ball
Los rodamientos rígidos de una hilera de bolas producidos bearings produced by ISB® have deep grooves and very close
por ISB®, contando con ranuras profundas y un elevado contacto, es conformity, or rather a high ratio between the radius of the
decir un elevado coeficiente entre el radio del camino de rodadura y raceway and the diameter of the balls, they are able not only to
el diámetro de las bolas, pueden resistir, además de cargas radiales, withstand radial loads but also axial loads in both directions.
requerimientos axiales en ambos sentidos. For special applications of the single row deep groove
En caso de aplicaciones especiales de rodamientos rígidos de radial ball bearings, please contact the engineering depart-
una hilera, contactar con el servicio técnico ISB®. Para informaciones ment of ISB®. For information concerning the bearings with
inherentes a rodamientos, en lo relativo a las dimensiones o regard to sizes or morphologic specifications, please contact
características morfológicas, contactar con la oficina técnica ISB®. the application engineering department of ISB®.
Fig. 1
28
RODAMIENTOS RÍGIDOS DE BOLAS RADIAL DEEP GROOVE BALL BEARINGS
Fig. 2
Fig. 3
Fig. 4
RODAMIENTOS CON UN RANURADO PARA ARO DE FIJACIÓN BEARINGS WITH ONE SNAP RING GROOVE
Los rodamientos ISB® rígidos de una hilera de bolas con ISB® single row deep groove radial ball bearings with
ranurado para aro de fijación se suministran en las siguientes one snap ring groove are supplied in the following versions:
versiones:
t Abiertos, N es el sufijo en el nombre (Fig. 5a); t Open, N being the designation suffix (Fig. 5a);
t Abiertos con aro de fijación, NR es el sufijo en el nombre (Fig. t Open with snap ring, NR being the designation
5b); suffix (Fig. 5b);
t Con junta Z en el lado opuesto al ranurado y aro de fijación, t With Z shield on the side opposite the groove and with snap
ZNR es el sufijo en el nombre (Fig. 5c); ring, ZNR being the designation suffix (Fig. 5c);
t Con juntas Z en ambos lados y aro de fijación, 2ZNR es el sufijo t With Z shield on both sides and with snap ring, 2ZNR being
en el nombre (Fig. 5d). the designation suffix (Fig. 5d).
Estos tipos de rodamientos simplifican el proyecto ya que These types of bearings simplify the project because
permiten la retención en sentido axial en el alojamiento mediante they can be detained axially in the housing by a snap ring or
un aro de fijación o de retención (Fig. 6), garantizando al mismo retaining ring (Fig. 6), which also saves space. In the product
tiempo un ahorro en términos de espacio. En la tabla de los table, together with the bearings, the designations and the
productos se expone, ademas de los rodamientos, los nombres dimensions of the snap rings are also given, because they may
y las dimensiones de los aros de fijación, porque los mismos se be supplied separately or already fitted on the bearing.
podrán suministrar por separado o bien ya montados.
Fig. 6
30
RODAMIENTOS RÍGIDOS DE BOLAS RADIAL DEEP GROOVE BALL BEARINGS
Fig. 7
Presentan una superficie de rotacion convexa y cuentan, They have a crowned rolling surface and have sliding
en ambos lados, con juntas deslizantes de goma acrilonitrilo- shields in Nitrile-Butadiene-Rubber (NBR) with sheet steel
butadieno (NBR) reforzadas con chapa. reinforcement on both sides.
Se suministran listos para el montaje y pre-engrasados. They are supplied ready for assembly and pre-greased.
Gracias a su superficie de rotación convexa pueden ser utilizados Thanks to their crowned rolling surface they can be used in
en aplicaciones en las cuales resulte probable una desalineación applications where there is a probable angular misalignment
angular respecto al camino de rodadura, y en aquellas donde sea compared to the raceway and where peripheral strain must
necesario reducir al mínimo las solicitaciones periféricas. be minimised.
DIMENSIONES DIMENSIONS
Las dimensiones generales de los rodamientos ISB® rígidos The overall dimensions of ISB® single row deep groove
de una hilera de bolas respetan la norma ISO 15:1998. radial ball bearings comply with standard ISO 15:1998.
TOLERANCIAS TOLERANCES
Los rodamientos rígidos de una hilera de bolas ISB® se ISB® single row deep groove radial ball bearings are
fabrican de conformidad con las tolerancias normales. Los valores manufactured pursuant to Normal tolerances. The tolerance
de las tolerancias respetan la norma ISO 492:2002. values comply with standard ISO 492:2002.
ISB® , específicamente para los sistemas de rodamientos For bearing arrangements where precision is the key
en los cuales la precisión resulta un factor determinante, produce factor, ISB® produces some specific bearings with precision
algunos con grados de precisión conforme a las clases P6 o P5. Si pursuant to class P6 or P5. If you wish to order these special
Usted desea solicitar estos rodamientos rígidos de bolas particulares types of deep groove radial ball bearings, please contact the
contacte con la oficina técnica. application engineering department.
DESALINEACIÓN MISALIGNMENT
La desalineación angular admisible, es decir aquella The admitted angular misalignment, being a misalign-
desalineación que no genera ulteriores solicitaciones inaceptables ment that does not produce unacceptable additional strain,
depende de cuatro factores: depends on four factors:
t juego interno radial del rodamiento en las condiciones de t The internal radial clearance of the bearing in the operating
servicio; conditions.
t dimensiones; t The size of the bearing.
t forma constructiva interna; t The internal constructional design.
t cargas y movimientos a los que está sujeto. t The loads and the movements acting on the bearing.
31
RODAMIENTOS RÍGIDOS DE BOLAS RADIAL DEEP GROOVE BALL BEARINGS
Cada desalineación produce pérdida de silenciosidad y Misalignment will result in increased noise of the bearing
reducción de la vida del rodamiento; no es posible hacer una tabla and will reduce its life span. It is impossible to draft a table with
con valores específicos de referencia porque las relaciones que the specific reference values because the relationships between
interesan los citados factores son muy complejas. these four factors just mentioned are too complex.
JAULAS CAGES
En base a las diversas dimensiones, serie y diseños son siete Based on the various sizes, series and versions, ISB® single
las jaulas con las que cuentan los rodamientos ISB® rígidos de una row deep groove radial ball bearings are fitted with one of the
hilera de bolas: following cages:
t obtenidas a partir de cinta, en chapa de acero, centradas en t pressed ribbon-type steel cage, centred on the balls, without
las bolas, ningún sufijo en el nombre (Fig. 8a); any designation suffix (Fig. 8a);
t obtenidas a partir de cinta, en latón, centradas en las bolas, Y t pressed ribbon-type brass cage, centred on the balls, with
es el sufijo en el nombre; designation suffix Y;
t remachadas, en chapa de acero, centradas en las bolas, ningún t riveted pressed steel cage, centred on the balls, without any
sufijo en el nombre (Fig. 8b); designation suffix (Fig. 8b);
t remachadas, en latón, centradas en las bolas, Y es el sufijo en t riveted pressed brass cage, centred on the balls, with desi-
el nombre; gnation suffix Y;
t mecanizadas de latón, centradas en las bolas, M es el sufijo en t Solid machined brass cage, centred on the balls, with desi-
el nombre (Fig. 8c); gnation suffix M (Fig. 8c);
t mecanizadas de latón, centradas en el aro externo, M es el t Solid machined brass cage, centred on the outer ring, with
sufijo en el nombre; designation suffix MA;
t moldeadas por inyección, a presión, en poliamida 6.6 reforzada t injection moulded snap-type cage made of polyamide 6.6
en fibra de vidrio, centradas en las bolas, TN9 es el sufijo en el with fibreglass reinforcement, centred on the balls, with
nombre (Fig. 8d); designation suffix TN9 (Fig. 8d);
Los rodamientos con jaulas de chapa estampada en diseño normal Standard ball bearings with pressed steel cage are also
están disponibles también en las otras versiones con jaulas mecanizadas available in other versions with solid machined brass or injection
de latón o moldeadas por inyección, a presión de poliamida 6.6. moulded snap-type cages made of polyamide 6.6.
Los rodamientos TN9 pueden ser utilizados hasta TN9 bearings can be used for temperatures up to +120°C .
temperaturas que alcanzan los +120°C .
Atención al utilizar aceites sintéticos, grasa a base de aceite Beware when using synthetic oil, synthetic oil-based
sintético y lubricantes con alto porcentaje de adivitos EP si se los grease and lubricants with high percentage of EP additives if
utiliza a altas temperaturas, podrían dañar las jaulas. used at high temperatures, as they could damage the cages.
32
RODAMIENTOS RÍGIDOS DE BOLAS RADIAL DEEP GROOVE BALL BEARINGS
33