Documentos de Académico
Documentos de Profesional
Documentos de Cultura
AutoCADcreacion PDF
AutoCADcreacion PDF
• Línea (line)
o Coordenadas absolutas
o Coordenadas relativas
o Coordenadas polares
• Rectángulo (rectangle)
• Circulo (circle)
• Arco (arc)
• Polígono
gono (polygon)
• Elipse (ellipse)
• Entrada dinámica (D
Dyn mode)
• Modo ortogonal (Orthogonal
rthogonal mode)
m
• Referencias de Objeto (Object Snaps)
Línea (line)
Permite ubicar puntos según datos indicados por un sistema de coordenadas (absoluto,
relativo, polar) y define el trazo de líneas.
Sintaxis: X, Y.
Command: l<enter>
Command: z<enter>
ZOOM
Specify corner of window, enter a scale factor (nX or nXP), or
[All/Center/Dynamic/Extents/Previous/Scale/Window/Object] <real time>: e<enter>
COORDENADAS RELATIVAS - Le permite introducir puntos referidos al punto previo que
haya introducido. Esto quiere decir que AutoCAD dibujará una línea desde el primer punto que
se indicó hasta otro punto que se encuentra X unidades horizontalmente e Y unidades
verticalmente, relativas al punto previo.
Sintaxis: @X,Y.
Command: l<enter>
Command: l<enter>
Command: l<enter>
Command: rec<enter>
Command: rec<enter>
Command: rec<enter>
Command: rec<enter>
Formas para crear círculos en AutoCAD: especificar diferentes combinaciones de centro, radio,
diámetro, puntos de la circunferencia, y los puntos sobre otros objetos.
Command: c
b) Círculo: diámetro
Command: c<enter>
Command: c<enter>
Command: c<enter>
Command: c<enter>
Paso previo: dibujar un triangulo cualquiera luego ir a menú Draw, Circle, Tan tan tan
Puede crear arcos de varias maneras. Con la excepción del primer método, los arcos se
dibujan a la izquierda desde el punto de inicio para el punto final.
Command: ARC<enter>
Specify start point of arc or [Center]: CLIC P1
Specify second point of arc or [Center/End]: CLIC P2
Specify end point of arc: CLIC P3
Command: ARC<enter>
Specify start point of arc or [Center]: clic P1
Specify second point of arc or [Center/End]: C<enter>
Specify center point of arc: clic P2
Specify end point of arc or [Angle/chord Length]: A
Specify included angle: 90<enter>
Command: ARC<enter>
Specify start point of arc or [Center]: clic P1
Specify second point of arc or [Center/End]: C<enter>
Specify center point of arc: clic P2
Specify end point of arc or [Angle/chord Length]: A<enter>
Specify included angle: -90<enter>
Command: ARC<enter>
Specify start point of arc or [Center]: C<enter>
Specify center point of arc: clic P1
Specify start point of arc: clic P2
Specify end point of arc or [Angle/chord Length]: A<enter>
Specify included angle: 60<enter>
CENTRO, INICIO, FINAL
Command: ARC<enter>
Specify start point of arc or [Center]: C<enter>
Specify center point of arc: clic P1
Specify start point of arc: clic P2
Specify end point of arc or [Angle/chord Length]: clic P3
Puede crear rectángulos y polígonos regulares con rapidez. Creación de polígonos es una
simple manera de llamar la triángulos equiláteros, cuadrados, pentágonos, hexágonos, y así
sucesivamente.
Dos comandos, polígono y rectángulo, proporcionar un método eficaz para crear rectángulos y
polígonos regulares, como triángulos equiláteros, cuadrados, pentágonos, hexágonos, y así
sucesivamente. Si es necesario, puede utilizar explotar para convertir el objeto resultante poli
ínea en las líneas.
Command: pol<enter>
POLYGON Enter number of sides <6>: 6<enter>
Specify center of polygon or [Edge]: clic P1
Enter an option [Inscribed in circle/Circumscribed about circle] <I>:
i<enter>
Specify radius of circle: 5<enter> o clic P2
Command: pol<enter>
POLYGON Enter number of sides <6>: 6<enter>
Specify center of polygon or [Edge]: clic P1
Enter an option [Inscribed in circle/Circumscribed about circle] <I>:
c<enter>
Specify radius of circle: 5<enter> o clic P2
Command: pol<enter>
POLYGON Enter number of sides <3>: 6<enter>
Specify center of polygon or [Edge]: e<enter>
Specify first endpoint of edge: clic P1
Specify second endpoint of edge: 4<enter> o clic P2
Elipse (ellipse)
Command: EL<enter>
Specify axis endpoint of ellipse or [Arc/Center]: C<enter>
Specify center of ellipse: clic P1
Specify endpoint of axis: 6<enter> o clic en P2
Specify distance to other axis or [Rotation]: 3<enter> o clic en P3
Command: EL<enter>
Specify axis endpoint of ellipse or [Arc/Center]: A<enter>
Specify axis endpoint of elliptical arc or [Center]: C<enter>
Specify center of elliptical arc: clic P1
Specify endpoint of axis: 66<enter> o clic P2
Specify distance to other axis or [Rotation]: 33<enter> o clic P3
Specify start angle or [Parameter]: clic P2
Specify end angle or [Parameter/Included angle]: 60<enter> o clic P4
Entrada dinámica (dyn mode)
• Despliega información cerca del cursor que se actualiza dinámicamente a medida que
el cursor se desplaza.
• Clic con el botón derecho y clic en “Parámetros” para controlar lo que muestra la
entrada dinámica.
Modo ortogonal (Ortho mode)
En la ilustración, una línea que se dibuja usando el modo Ortho. El punto P1 es el primer punto
asignado, y en el punto P2 es la posición del cursor cuando el segundo punto es asignado.
Object Snaps (Referencias de Objeto)
• Se abrevia 'Osnaps'
• Ess un método para hacer referencia a puntos específicos de un objeto (atributos
geométricos) de manera rápida y precisa.
• Los
os elementos ya existentes en nuestro dibujo nos dan referencias geométricas para
los objetos nuevos.
• Los
os nuevos objetos suelen crearse y ubicarse siempre en relación a lo ya dibujado
dibujado.
La barra
arra de herramientas con estos Osnaps como se muestra a continuación:
ICONO OPCIÓN TECLADO ICONO OPCIÓN CARACTERISTICA
Command: l<enter>
Command: l<enter>