Está en la página 1de 38

is known as compressible flow.

If the pressure drop due to the flow of a gas through a system is


large enough to cause a 10% or greater decrease in , then the flow is considered to be
compressible. Manual de Historia Medieval. Siglos III al XVManual de Historia Medieval. Siglos III
al XVManual de Historia Medieval. Siglos III al XVManual de Historia Medieval. Siglos III al
XVManual de Historia Mpuertos, depósitos, factorías) destinada a controlar el tráfico
marítimo. España, en cambio, optó por puertos, depósitos, factorías) destinada a controlar el
tráficodel vínculo entre las partes del sistema: lodel vínculo entre las partes del sistema: lo
económico y lo político se relacionaban llegando a constituir estructuras confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al mercado de ultramar, producidas a

través de trabajo doméstico y rural. Así, desde mediados delObjetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.
Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica


conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Muestra de cálculos
tabla resumen

correlación con gráfica

conclusiones.

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

correlación con gráfica

conclusiones.

Objetivos

Procedimiento

Datos tomados (formatos)

Muestra de cálculos

tabla resumen

correlación con gráfica

conclusiones.

siglo XV y durante el siglo


XVI la industria rural a domicilio terminó por transformar la estructura
económico y lo político se relacionaban llegando a del víncul

NTC 3674

NTC 3674

NTC 3674

NTC 3674

NTC 3674

NTC 3674

NTC 3674

NTC 3674

NTC 3674

NTC 3674
o entre las partes del sistema: lo
económico y lo político se relacionaban llegando a constituir estructuras confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al mercado de ultramar, producidas a
través de trabajo doméstico y rural. Así, desde mediados del siglo XV y durante el siglo
XVI la industria rural a domicilio terminó por transformar la estructuraconstituir estructuras
confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al m

NTC 3674

NTC 3674

NTC 3674
ercado de ultramar, producidas a
través de trabajo doméstico y rural. Así, desde mediados del siglo XV y durante el siglo
XVI la industria rural a domicilio terminó por transformar la estructuradel vínculo entre las partes
del sistema: lo
económico y lo político se relacionaban llegando a constituir estructuras confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al mercado de ultramar, producidas a
través de trabajo doméstico y rural. Así, desde mediados del siglo XV y durante el siglo
XVI la industria rural a domicilio terminó por transformar la estructuradel vínculo entre las partes
del sistema: lo
económico y lo político se relacionaban llegando a constituir estructuras confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al mercado de ultramar, producidas a
través de trabajo doméstico y rural. Así, desde mediados del siglo XV y durante el siglo
XVI la industria rural a domicilio terminó por transformar la estructuradel vínculo entre las partes
del sistema: lo
económico y lo político se relacionaban llegando a constituir estructuras confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al mercado de ultramar, producidas a
través de trabajo doméstico y rural. Así, desde mediados d

NTC 3674

NTC 3674

NTC 3674

NTC 3674
el siglo XV y durante el siglo
XVI la industria rural a domicilio terminó por transformar la estructuradel vínculo entre las partes
del sistema: lo
económico y lo político se relacionaban llegando a constituir estructuras confederales. La
conformación de la economía mundo se asentó sobre la expansión ultramarina y sobre
todo, sobre la producción de manufacturas con vistas al mercado de ultramar, producidas a
través de trabajo doméstico y rural. Así, desde mediad

NTC 3674

de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.


DATOS

de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.


DATOS
de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.
DATOS

de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.


DATOS

de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.


DATOS

de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.


DATOS

de los datos obtenidos en el laboratorio respecto a los diferentes ensayos realizados.


DATOS

NTC 3674

NTC 3674

NTC 3674
os del siglo XV y durante el siglo
XVI la industria rural a domicilio terminó por transformar la estructura
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía quela conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía queedieval. Siglos III al XV
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
Manual de HistoriManual de Historia Medieval. Siglos III al XVa Medieval. Siglos III al XVManual de
Historia Medieval. Siglos III al XVManual de Historia Medieval. Siglos III al XVManual de Historia
Medieval. Siglos III al XVThe discharge
coefficient is near unity, and theVenturi (1746Manual de Historia Medieval. Siglos III al XVManual
de Historia Medieval. Siglos III al XVManual dAún no nos llega la Lexus polaripuertos, depósitos,
factorías) destinada a controlar el tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía quezae Historia Medieval. Siglos III al XVManual de Historia
Medieval. Siglos III al XVManual de Historia Medieval. Aún no nos llega la Lexus polarizaAún no
nos llega la Lexus polarizaSiglos III al XVManual de Historia Medieval. Siglos III al XVManual de
Historia Medieval. Siglos III al XVManual de Historia Medieval. Siglos III al XVManual de Historia
Medieval. Siglos III al XV–1822), an Italian physicist who first tested conical
¿No desea cargar archivos?
Manual de Historia Medieval. Aún no nos llega la Lexus polarizaAún no nos llega la Lexus
polarizaAún no nos llega la Lexus polarizaAún no nos llega la Lexus polarizaAún no nos llega la
Lexus polarizaAún no nos llega la Lexus polarizaAún no nos llega la Lexus polariza
puertos, depósitos, factorías) destinada a controlar el tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía que
La Otra y Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el
primer Especial "El Tercero puertos, depósitos, factorías) destinada a controlar el tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía quepuertos, depósitos, factorías) destinada a controlar el
tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía quepuertos, depósitos, factorías) destinada a controlar el
tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía quepuertos, depósitos, factorías) destinada a controlar el
tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía queStudios" eLa Otra y Ketekalles interpretan Pa' fuera y
pa' dentro para Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" eLa Otra
y Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el primer
Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro para
Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" eLa Otra y Ketekalles
interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el primer Especial "El
Tercero Studios" eAún no nos llega la Lexus polarizaAún no nos llega la Lexus polarizaAún no
nos llega la Lexus polarizaAún npuertos, depósitos, factorías) destinada a controlar el tráfico
marítimo. España, en cambio, optó por la conquista de territorios y poblaciones. No
obstante, la organización imperial era producto de su tiempo ya que sendos imperios se
guiaron por el precepto que establecía queo nos llega la Lexus polarizaAún no nos llega la Lexus
polarizaAún no nos llega la Lexus polariza
La Otra y Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el
primer Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro
para Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" eLa Otra y
Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el primer
Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro para
Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" eLa Otra y Ketekalles
interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el primer Especial "El
Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de
Micros Abiertos en el primer Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan
Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el primer Especial "El Tercero
Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros
Abiertos en el primer Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera
y pa' dentro para Sesión de Micgs: El canal de los cantautores, Escucha Temazos Sesión de
Micros Abiertos, Escucha SdMA 2016, Rozalén, Road Ramos, Muerdo, Pedro Pastor, Blue
Caravan, El Kanka, Antílopez, Luis Carrillo, ros Abiertos en el primer Especial "El Tercero
Studios" e
gs: El canal de los cantautores, Escucha Temazos Sesión de Micros Abiertos, Escucha SdMA
2016, Rozalén, Road Ramos, Muerdo, Pedro Pastor, Blue Caravan, El Kanka, Antílopez, Luis
Carrillo,
gs: El canal de los cantautores, Escucha Temazos Sesión de Micros Abiertos, Escucha SdMA
2016, Rozalén, Road Ramos, Muerdo, Pedro Pastor, Blue Caravan, El Kanka, Antílopez, Luis
Carrillo, gs: El canal de los cantautores, Escucha Temazos Sesión de Micros Abiertos,
Escucha SdMA 2016, Rozalén, Road Ramos, Muerdo, Pedro Pastor, Blue Caravan, El Kanka,
Antílopez, Luis Carrillo, gs: El canal de los cantautores, Escucha Temazos Sesión de Micros
Abiertos, Escucha SdMA 2016, Rozalén, Road Ramos, Muerdo, Pedro Pastor, Blue Caravan,
El Kanka, Antílopez, Luis Carrillo, gs: El canal de los cantautores, Escucha Temazos Sesión
de Micros Abiertos, Escucha SdMA 2016, Rozalén, Road Ramos, Muerdo, Pedro Pastor, Blue
Caravan, El Kanka, Antílopez, Luis Carrillo, La Otra y Ketekalles interpretan Pa' fuera y pa'
dentro para Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" e
La Otra y Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el
primer Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro
para Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" eLa Otra y
Ketekalles interpretan Pa' fuera y pa' dentro para Sesión de Micros Abiertos en el primer
Especial "El Tercero Studios" eLa Otra y Ketekalles interpretan Pa' fuera y pa' dentro para
Sesión de Micros Abiertos en el primer Especial "El Tercero Studios" e
KJDSBKASGDASHDASHJJDSAD
SADBASHDGASJD
SADBASJDKJASHKDJA
SADKJASDKJASDBKJ
¿No desea cargar archivos?
Obtenga descargas ilimita
¿No desea cargar archivos?
Obtenga descargas ilimita
¿No desea cargar archivos?
Obtenga descargas ilimita
¿No desea cargar archivos?
Obtenga descargas ilimita¿No desea cargar archivos?
Obtenga descargas ilimita¿No desea cargar archivos?
Obtenga descargas ilimita
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Hero desea cargar archivos?
Obtenga descargas ilimitadas como miembro
Registrarse Ahorao desea cargar archivos?
Obtenga descargas ilimitadas como miembro
Registrarse Ahorao desea cargar archivos?
Obtenga descargas ilimitadas como miembro
Registrarse Ahorao desea cargar archivos?
Obtenga descargas ilimitadas como miembro
Registrarse Ahora
o desea cargar archivos?
Obtenga descargas ilimitadas como miembro
Registrarse Ahora
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: not
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: not
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: not
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: not
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: not

Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: not
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: notvv

Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: notv
Lo sentimos, ba.docx ya existe en Scribd. Suba nuevo contenido que otros usuarios de
Scribd encuentren valioso. Ej.: notsdñksjadlkashkdjshakdjasmnw ebmnwbkdaw

o desea cargar archivos?


Obtenga descargas ilimitadas como miembro
Registrarse Ahorao desea cargar archivos?
Obtenga descargas ilimitadas como miembro
Registrarse Ahora
schel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and thenturi (1746–1822), an Itadrology by David R.
Maidment gratis.

Cargue Ahora drology by David R. Maidment gratis.


Cargue Ahora drology by David R. Maidment gratis.
Cargue Ahora drology by David R. Maidment gratis.
Cargue Ahora drology by David R. Maidment gratis.
Cargue Ahora drology by David R. Maidment gratis.
Cargue Ahora drology by David R. Maidment gratis.
Cargue Ahora drology by David R. Maidment gratis.
Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora drology by David R. Maidment gratis.


Cargue Ahora
drology by David R. Maidment gratis.

Cargue Ahora
lian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo d V
Substituting,
(820 kg/m )((1 0.75 )
2
0.0011 m / (1.767 10 m )(0.96)
34
342

Venturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. TVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and thehe original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and theP
s
which gives the pressure drop across the meterCo d V
Substituting,
(820 kg/m )((1 0.75 )
2
0.0011 m / (1.767 10 m )(0.96)
34
342


P
s
which gives the pressure drop across the meterCo d V
Substituting, unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
v
v
v
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
v
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo unity, and theVenturi (1746–1822), an
Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo unity, and theVenturi (1746–1822), an
Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo unity, and theVenturi (1746–1822), an
Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo unity, and theVenturi (1746–1822), an
Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo
unity, and theVenturi (1746–1822), an Italian physicist who first tested conical
expansions and contractions. The original, or classical, venturi was invented by a U.S.
engineer, Clemens Herschel, in 1898. It consisted of a 21° conical contraction, a
straight throat of diameter d and length d, then a 7 to 15° conical expansion. The discharge
coefficient is near unity, and they must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to tCo (820 kg/m )((1 0.75 )
2
0.0011 m / (1.767 10 m )(0.96)
34
342


P
s
which gives the pressure drop across the meterCo d V
Substituting,
(820 kg/m )((1 0.75 )
2
0.0011 m / (1.767 10 m )(0.96)
34
342


P
s
which gives the pressure drop across the meterCo d V
Substituting,
(820 kg/m )((1 0.75 )
2
0.0011 m / (1.767 10 m )(0.96)
34
342


P
s
which gives the pressure drop across the meterhe flow of a gas through a system is large enough to
cause a 10% or greater decrease in , then the flow is considered to be compressible. In this case,
appropriate formulas that take into consideration changes in both density and velocity must be
used to describe the flow. The terms The flow is steady and incompressible. 2 The discharge coefficient
of the nozzle meter is Cd = 0.96.
Properties The density of kerosene is given to be = 820 kg/m3.
Analysis The diameter ratio and the throat area of the meter are
2242
0/ 4 (0.015 m) / 4 1.767 10 m
/ 1.5 / 2 0.75




Ad
dD
To fill a 16-L tank in 20 s, the flow rate mustThe flow is steady and incompressible. 2 The discharge
coefficient of the nozzle meter is Cd = 0.96.
Properties The density of kerosene is given to be = 820 kg/m3.
Analysis The diameter ratio and the throat area of the meter are
2242
0/ 4 (0.015 m) / 4 1.767 10 m
/ 1.5 / 2 0.75




Ad
dD
To fill a 16-L tank in 20 s, the flow rate mustThe flow is steady and incompressible. 2 The discharge
coefficient of the nozzle meter is Cd = 0.96.
Properties The density of kerosene is given to be = 820 kg/m3.
Analysis The diameter ratio and the throat area of the meter are
2242
0/ 4 (0.015 m) / 4 1.767 10 m
/ 1.5 / 2 0.75




Ad
dD
To fill a 16-L tank in 20 s, the flow rate mustThe flow is steady and incompressible. 2 The discharge
coefficient of the nozzle meter is Cd = 0.96.
Properties The density of kerosene is given to be = 820 kg/m3.
Analysis The diameter ratio and the throat area of the meter are
2242
0/ 4 (0.015 m) / 4 1.767 10 m
/ 1.5 / 2 0.75




Ad
dD
To fill a 16-L tank in 20 s, the flow rate mustThe flow is steady and incompressible. 2 The discharge
coefficient of the nozzle meter is Cd = 0.96.
Properties The density of kerosene is given to be = 820 kg/m3.
Analysis The diameter ratio and the throat area of the meter are
2242
0/ 4 (0.015 m) / 4 1.767 10 m
/ 1.5 / 2 0.75




Ad
dD
To fill a 16-L tank in 20 s, the flow rate mustspacecraft travel. They are also termsis known as
compressible flow. If the pressure drop due to the flow of a gas through a system is large enough
to cause a 10% or greater decrease in , then the flow is considered to be compressible. In this
case, appropriate formulas that take into consideration changes in both density and velocity must
be used to describe the flow. The terms subsonic, sonic, and supersonic are familiar terms related
to aircraft and spacecraft travel. They are also termsis known as compressible flow. If the pressure
drop due to the flow of a gas through is known as compressible flow. If the pressure drop due to
the flow of a gas through a system is large enough to cause a 10% or greater decrease in , then
the flow is considered to be compressible. In this case, appropriate formulas that take into
consideration changes in both density and velocity must be used to describe the flow. The terms
subsonic, sonic, and supersonic are familiar terms related to aircraft and spacecraft travel. They
are also termsis known as compressible flow. If the pressure drop due to the flow of a gas through
a system is large enough to cause a 10% or greater decrease in , then the flow is considered to be
compressible. In this case, appropriate formulas that take into consideration changes in both
density and velocity must be used to describe the flow. The terms subsonic, sonic, and supersonic
are familiar terms related to aircraft and spacecraft travel. They are also termsis known as
compressible flow. If the pressure drop due to the flow of a gas through a system is large enough
to cause a 10% or greater decrease in , then the flow is considered to be compressible. In this
case, appropriate formulas that take into consideration changes in both density and velocity must
be used to describe the flow. The terms subsonic, sonic, and supersonic are familiar terms related
to aircraft and spacecraft travel. They are also termsis known as compressible flow. If the pressure
drop due to the flow of a gas through a system is large enough to cause a 10% or greater decrease
in , then the flow is considered to be compressible. In this case, appropriate formulas that take
into consideration changes in both density and velocity must be used to describe the flow. The
terms subsonic, sonic, and supersonic are familiar terms related to aircraft and spacecraft travel.
They are also termsis known as compressible flow. If the pressure drop due to the flow of a gas
through a system is large enough to cause a 10% or greater decrease in , then the flow is
considered to be compressible. In this case, appropriate formulas that take into consideration
changes in both density and velocity must be used to describe the flow. The terms subsonic, sonic,
and supersonic are familiar terms related to aircraft and spacecraft travel. They are also termsis
known as compressible flow. If the pressure drop due to the flow of a gas through a system is large
enough to cause a 10% or greater decrease in , then the flow is considered to be compressible. In
this case, appropriate formulas that take into consideration changes in both density and velocity
must be used to describe the flow. The terms subsonic, sonic, and supersonic are familiar terms
related to aircraft and spacecraft travel. They are also termsis known as compressible flow. If the
pressure drop due to the flow of a gas through a system is large enough to cause a 10% or greater
decrease in , then the flow is considered to be compressible. In this case, appropriate formulas
that take into consideration changes in both density and velocity must be used to describe the
flow. The terms subsonic, sonic, and supersonic are familiar terms related to aircraft and
spacecraft travel. They are also termsis known as compressible flow. If the pressure drop due to
the flow of a gas through a system is large enough to cause a 10% or greater decrease in , then
the flow is considered to be compressible. In this case, appropriate formulas that take into
consideration changes in both density and velocity must be used to describe the flow. The terms
subsonic, sonic, and supersonic are familiar terms related to aircraft and spacecraft travel. They
are also termstas de clase, investigacion

tas de clase, investigacion


tas de clase, investigaciontas de clase, investigaciontas de clase, investigaciontas de
clase, investigacion
tas de clase, investigacion
tas de clase, investigaciontas de clase, investigaciontas de clase, investigaciontas de
clase, investigaciontas de clase, investigacion
tas de clase, investigaciontas de clase, investigacion
tas de clase, investigacion
tas de clase, investigaciontas de clase, investigaciontas de clase,
investigacionsdjshakdjhaskjdghaskjda

También podría gustarte