Está en la página 1de 2

Product Information

Specialty
Lubricants
Molykote® 1000 Solid Lubricant
Paste
FEATURES & BENEFITS Solid lubricant paste for bolted metal joints; contains no lead or
 Can be used over a wide range of nickel
temperature (-30°C/-22°F to
+650°C/1202°F) APPLICATIONS
 High load-carrying capacity  Suitable for bolted joints that are subjected to high temperatures up to 650°C
 Enables non-destructive (1202°F) and to corrosive effects, and which, after assembling and the initial
dismantling, even after long use at operation, have to be re-tightened or disconnected. In order to ensure constant
high temperatures pre-stressing forces, uniform and steady coefficients of friction of the lubricant
 Coefficient of friction unchanged are necessary.
in the area of oiled bolts, even after  Used successfully for cylinder head bolts, nozzle head screws of plastic
several bolt re-tightening and injection molding machines, bolted joints in the chemical industry, and also
loosening processes for the tension rings of centrifuges.
 Good corrosion protection
TYPICAL PROPERTIES
COMPOSITION Specification Writers: These values are not intended for use in preparing
 Solid lubricants specifications. Please contact your local Dow Corning sales office or your Global
 Mineral oil Dow Corning Connection before writing specifications on this product.
 Thickener
 Powdered metal Test* Property Unit Result
Color Brown
Penetration, density
ISO 2137 Unworked penetration mm/10 280 - 310
ISO 2811 Density at 20C (68F) g/ml 1.26
Temperature
Service temperature range1 C -30 to +650
F -22 to +1202
Load-carrying capacity, wear protection, service life
Four-ball tester
DIN 51 350 pt.4 Weld load N 4800
DIN 51 350 pt.5 Wear scar under 400N load mm 0.65
Almen-Wieland machine
OK load N 20000
Frictional force N 2600
Coefficient of friction
Screw test - thread2 0.13
Screw test -  head 0.08
Initial break-away torque3 Nm 135
DIN 51 802 SKF-Emcor method 1
*
ISO: International Standardisation Organisation.
DIN: Deutsche Industrie Norm.
1
Temperature resistance of solid lubricants.
2
Coefficient of friction in bolted connection, M12, 8.8, on blackened surface.
3
M 12, with starting torque Ma = 62Nm and heat treatment at 540°C (l004°F), 21h,
bolt material: no. 1.7709.
DESCRIPTION PACKAGING DOW CORNING SPECIFICALLY
Molykote® 1000 Solid Lubricant Paste INFORMATION DISCLAIMS ANY OTHER
is a lead and nickel free anti-seize This product is available in different EXPRESS OR IMPLIED
paste used to reduce wear and standard container sizes. Detailed WARRANTY OF FITNESS FOR A
optimize friction of threaded fasteners, container size information should be PARTICULAR PURPOSE OR
or other metal-to-metal joints, obtained from your nearest MERCHANTABILITY.
enabling non-destructive dismantling, Dow Coming sales office or
even after long exposure to high Dow Coming distributor. DOW CORNING DISCLAIMS
temperatures. It offers good corrosion LIABILITY FOR ANY
protection, under high loads, over a INCIDENTAL OR
LIMITATIONS CONSEQUENTIAL DAMAGES.
wide temperature range.
This product is neither tested nor
represented as suitable for medical or
HOW TO USE We help you invent the future.
pharmaceutical uses.
How to Apply
If possible, clean the thread and the molykote.com
HEALTH AND
bolt with a wire brush. Spread an
adequate amount of the paste on the ENVIRONMENTAL
thread, right up to its root in order to INFORMATION
obtain a good seal. In order not to alter To support Customers in their product
the properties, the paste must not be safety needs, Dow Corning has an
mixed with grease or oils. extensive Product Stewardship
organization and a team of Product
To enable this product to be applied Safety and Regulatory Compliance
more quickly and cleanly to larger (PS&RC) specialists available in each
areas, it is advisable to use the spray area.
can.
For further information, please see our
HANDLING website, dowcorning.com or consult
your local Dow Corning
PRECAUTIONS representative.
PRODUCT SAFETY
INFORMATION REQUIRED FOR
SAFE USE IS NOT INCLUDED IN LIMITED WARRANTY
THIS DOCUMENT. BEFORE INFORMATION – PLEASE
HANDLING, READ PRODUCT READ CAREFULLY
AND MATERIAL SAFETY DATA The information contained herein is
SHEETS AND CONTAINER offered in good faith and is believed to
LABELS FOR SAFE USE, be accurate. However, because
PHYSICAL AND HEALTH conditions and methods of use of our
HAZARD INFORMATION. THE products are beyond our control, this
MATERIAL SAFETY DATA information should not be used in
SHEET IS AVAILABLE ON THE substitution for customer’s tests to
DOW CORNING WEBSITE AT ensure that our products are safe,
DOW CORNING.COM, OR FROM effective, and fully satisfactory for the
YOUR DOW CORNING SALES intended end use. Suggestions of use
APPLICATION ENGINEER, OR shall not be taken as inducements to
DISTRIBUTOR, OR BY CALLING infringe any patent.
DOW CORNING CUSTOMER
SERVICE. Dow Corning’s sole warranty is that
our products will meet the sales
USABLE LIFE AND specifications in effect at the time of
shipment.
STORAGE
When stored at or below 20°C (68°F)
Your exclusive remedy for breach of
in the original unopened containers,
such warranty is limited to refund of
Molykote 1000 Solid Lubricant Paste
purchase price or replacement of any
has a usable life of 60 months from
product shown to be other than as
the date of production.
warranted.

Molykote® 1000 Solid Lubricant Paste Dow Corning and Molykote are registered trademarks of Dow Corning Corporation.
2013, September 19 We help you invent the future is a trademark of Dow Corning Corporation.
Form No. 71-0218F-01 © 1997 - 2013 Dow Corning Corporation. All rights reserved.
2

También podría gustarte