Está en la página 1de 1

TRANSPORTE HÍDRICO A FLUJO LIBRE. – DISEÑO Y WATER TRANSPORTATION TO FREE FLOW.

- DESIGN AND
CALCULO DE LA LÍNEA DE ADUCCIÓN EN INGENIERÍA DE CALCULATION OF THE LINE OF ADDUCTION IN AQUEDUCT
ACUEDUCTOS ENGINEERING

CHAPTER 1
CAPÍTULO 1
In the design of an aqueduct system, the water transport depends
En el de un Sistema de Acueducto, el transporte del agua
depende del tipo de agua que se mueve y de las condiciones on the type of water that moves and the hydraulic conditions in
en que se realiza el movimiento de la masa de agua. which the movement of the water body takes place. Depending on
el tipo de caudal a circular se transportar o bien agua the type of flow to be circulated, it will be possible to transport raw
cruda, es decir, agua sin tratamiento y con un porcentaje de water, that is to say, untreated water with a percentage of
suspendidos y sedimentables, o bien agua potable, que es un tipo suspended and sedimentable solids, or potable water, which is a
de agua ya tratada. Para cada uno de los casos de type of water already treated. For each of the cases of water
de agua, sea agua cruda o agua potabilizada, en de transportation, whether raw water or water purification, in Aqueduct
Acueductos se tienen requerimientos de diferentes. con Engineering there are different design requirements. Thus, in order
el fin de distinguir claramente el tipo de agua transportada en el to clearly distinguish the type of water transported in the Aqueduct
Sistema de Acueducto se suele denominar al transporte System it is usually called adduction to the transport of raw water,
de agua cruda, es decir, todo transporte de agua que antecede la that is, all water transport that precedes the Water Treatment Plant
Planta de Tratamiento de agua de suministro o de exceso supply or excess pipes and cleaning; while the transport of treated
y limpieza; mientras que se denomina el transporte de water is called conduction after its sedimentation process. The
agua tratada de su proceso de El water transport, from the hydraulic reference point, can be carried
transporte de agua, desde el punto de referencia puede out either in free flow in open or closed channels or in flow under
realizarse bien sea a flujo libre en canales abiertos o cerrados o pressure. In the case of free-flowing transport, the sheet of water is
bien sea a flujo a En el caso de transporte a flujo libre, la at atmospheric pressure and transport can be done through
de agua se encuentra a la y el hydraulic works built in situ (open or closed channels) or by
transporte puede hacerse a de obras construidas prefabricated structures (pipes). In the case of transportation of
en situ (canales abiertos o cerrados) o por estructuras pressurized water, it can be done through ducts that work under
prefabricadas En el caso de de agua a pressure by gravity or by pumping, which is normally done through
se hacer mediante conductos que funcionen a pipes. In general terms
por gravedad o por bombeo, que normalmente se realiza a

NOMBRE ALUMNO: NOMBRE DOCENTE: FECHA:


FACULTAD DE INGENIERIA 27-Abril-2018
Omar Hernan Rodriguez Espitia Ing.Carlos Arturo Carvajal Castañeda

SUB-TEMA:
PROGRAMA: CODIGO: TEMA:
Ingenieria Civil. 1310340 ACUEDUCTOS Y ALCANTARILLADOS 5 CAPITULO 1

También podría gustarte