Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Part Name:
A) Dimensional Aspects
S.No. Parameter
1 Overall length
2 Overall width
3 Inner length
4 Inner width
5 Inner height
10 ROH
11 pivot length
12 Tipping angle
1 EOL testing
3 Paint adhesion
S.No. Parameter
a) Painting Thickness
Salt Spray Test (attch
b)
report)
c) Special Packing Instruction
d) Visual Inspection
S.No. Parameter
Summary:-
Remarks:
Inspected by
Automotive Coaches and Com
Gummidipoondi - 601 20
Customer Specification R
7203487
12 cum FC - load body Assembly
Tolerance
Specification
Min Max
90 90° 91°
5 0 5
864 863 865
1664 x
1667 x 125 1670 x 125
125
195Nm - -
0/100 - -
Coating, If applicable
Specification
Actual Measured Values
70 microns 60 80
- - -
Specific Requirement, If any
Model
Actual
Special Method of Measured
Characteristic Inspection Samples
s (CC / SC) (Instrument) S1
- Measuring tape
- Measuring tape
- Measuring tape
- Measuring tape
- Measuring tape
- Bevel productor
- Measuring tape
- Measuring tape
- Measuring tape
- Measuring tape
- Measuring tape
- Inclinometer
ntinuity check,etc)
- Torque wrench
cross hatch
-
cutter
- DFT gauge
- SSRT
- -
If any
s Visual
w Holes Visual
ges Visual
Remarks
ns
Approved by