Está en la página 1de 4

Glamox Fluorescent fixtures

Aqua Signal Fluorescent Fixtures


Aqua Signal / Glamox 0673 LED

Glamox Fluo fixture type MIR-Z 67 IP66/67


Watertight fixture for marine and offshore.
Certified by accredited certifications according to relevant EU norms
Available in 230V 50 or 60 Hz, and 110V 60Hz
Body of deep Aluzink , Stove enamelled white epoxy/polyster powder finish.
Diffuser made of impact resisting polycarbonate (PK) or optionally chemical resistant (Kembest) material.
A white plate of Aluzink covers the electrical gear.
Two T8 lamps with spring loaded lamp holders.
Optionally with an electronic ballast possible.
Both sides one M20 gland and blind plug. Trough wiring (TW) 5x2.5 mm² is standard.
Emergency lights possible (E1) one hour (E3) three hour. In 58W only one hour possible.

Number Description Watt Volt/Hz L in mm C in mm

89GL1030 MIR-Z 67 218F TW PK 2x18W 230/50 724 704


89GL1031 MIR-Z 67 236F TW PK 2x36W 230/50 1334 1314
89GL1032 MIR-Z 67 258F TW PK 2x58W 230/50 1634 1614
89GL1033 MIR-Z 67 218F E3 TW PK 2x18W 230/50 858 838
89GL1034 MIR-Z 67 236F E3 TW PK 2x36W 230/50 1468 1448
89GL1035 MIR-Z 67 258F E1 TW PK 2x58W 230/50 1768 1748
89GL1036 MIR-Z 67 218F 3/6 TW PK 2x18W 230/60 724 704
89GL1037 MIR-Z 67 236F 3/6 TW PK 2x36W 230/60 1334 1314
89GL1038 MIR-Z 67 218F E3 3/6 TW PK 2x18W 230/60 858 838
89GL1039 MIR-Z 67 236F E3 3/6 TW PK 2x36W 230/60 1468 1448

Types with a high frequency electronic ballast

89GL1030B MIR-Z 67 218HF TW PK 2x18W 240/50-60 724 704


89GL1031B MIR-Z 67 236HF TW PK 2x36W 240/50-60 1334 1314
89GL1032B MIR-Z 67 258HF TW PK 2x58W 240/50-60 1634 1614

E3/E1 battery emergency


fixtures.

Dimensions in mm.
Pag. 77/06
Glamox Fluo fixture type MIR-S 67 IP66/67
Watertight fixture for marine and offshore.
Certified by accredited certifications according to relevant EU norms
Available in 230V 50 or 60 Hz, and 110V 60Hz
Body of acid proof stainless steel , Stove enamelled white epoxy/polyster powder finish.
Diffuser made of impact resisting polycarbonate (PK) or optionally chemical resistant (Kembest) material.
A white plate of Aluzink covers the electrical gear.
Two T8 lamps with spring loaded lamp holders.
Optionally with an electronic ballast possible.
Both sides one M20 gland and blind plug. Trough wiring (TW) 5x2.5 mm² is standard.
Emergency lights possible (E1) one hour (E3) three hour. In 58W only one hour possible.

Number Description Watt Volt/Hz L in mm C in mm

89GL1130 MIR-S 67 218F TW PK 2x18W 230/50 724 704


89GL1131 MIR-S 67 236F TW PK 2x36W 230/50 1334 1314
89GL1132 MIR-S 67 258F TW PK 2x58W 230/50 1634 1614
89GL1133 MIR-S 67 218F E3 TW PK 2x18W 230/50 858 838
89GL1134 MIR-S 67 236F E3 TW PK 2x36W 230/50 1468 1448
89GL1135 MIR-S 67 258F E1 TW PK 2x58W 230/50 1768 1748
89GL1136 MIR-S 67 218F 3/6 TW PK 2x18W 230/60 724 704
89GL1137 MIR-S 67 236F 3/6 TW PK 2x36W 230/60 1334 1314
89GL1138 MIR-S 67 218F E3 3/6 TW PK 2x18W 230/60 858 838
89GL1139 MIR-S 67 236F E3 3/6 TW PK 2x36W 230/60 1468 1448

Types with a high frequency electronic ballast

89GL1130B MIR-S 67 218HF TW PK 2x18W 240/50-60 724 704


89GL1131B MIR-S 67 236HF TW PK 2x36W 240/50-60 1334 1314

Glamox Fluo fixture type MIX-Z 67 ATEX ZONE 2, II 3GD Eex nA T3


Watertight fixture for marine and offshore.
Certified by accredited certifications according to Ex n norms IEC-79-15
MIX67: 3GD Eex nA T3, IP 66/67 Ta=30°C/45°C.
Mechanical impact (EN 50 102): IK 10
Available in 230V 50 or 60 Hz, and 110V 60Hz
Body of deep Aluzink, Stove enamelled white epoxy/polyster powder finish.
Diffuser made of impact resisting polycarbonate (PK) or optionally chemical resistant (Kembest) material.
A white plate of Aluzink covers the electrical gear.
Two T8 lamps with spring loaded lamp holders.
HF electronic ballast for emergency versions (HF-E3)
Both sides one M20 gland and blind plug. Trough wiring (TW) 5x2.5 mm² is standard.
Emergency lights possible (E1) one hour (E3) three hour. In 58W only one hour possible.

Number Description Watt Volt/Hz L in mm C in mm

89GL1141 MIX-Z 67 218F TW PK 2x18W 230/50 724 704


89GL1142 MIX-Z 67 236F TW PK 2x36W 230/50 1334 1314
89GL1143 MIX-Z 67 258F TW PK 2x58W 230/50 1634 1614
89GL1144 MIX-Z 67 218F E3 TW PK 2x18W 230/50 858 838
89GL1145 MIX-Z 67 236F E3 TW PK 2x36W 230/50 1468 1448
89GL1146 MIX-Z 67 258F E1 TW PK 2x58W 230/50 1768 1748
89GL1147 MIX-Z 67 218F 3/6 TW PK 2x18W 230/60 724 704
89GL1148 MIX-Z 67 236F 3/6 TW PK 2x36W 230/60 1334 1314

77-06.1
Glamox Fluo fixture type MAX-Z 67 Hazardous area, zone 1 Ex edms IIC T4, IP66/67
Watertight fixture for marine and offshore.
NEMKO certificate no EX 97D184
MAX: IP66/67 Ta=45°C, Zone 1 Ex edms IIC T4
Mechanical impact (EN 50 102): IK 10
Available in 230V 50 or 60 Hz, and 110V 60Hz
Body of deep drawn Aluzink, Stove enamelled white epoxy/polyster powder finish.
Diffuser made of impact resisting polycarbonate (PK) or optionally chemical resistant (Kembest) material.
A white plate of Aluzink covers the electrical gear.
Two T8 lamps with Glamox zone 1 lamp holders.
Standard luminaire is delivered with electronic ballast (HF)
Both sides one M20 gland and blind plug. Trough wiring (TW) 6x2.5 mm² is standard.
Emergency lights possible (E1) one hour (E3) three hour. In 58W only one hour possible.

Number Description Watt Volt/Hz L in mm C in mm

89GL1151 MAX-Z 67 218HF TW PK 2x18W 230/50 724 704


89GL1152 MAX-Z 67 236HF TW PK 2x36W 230/50 1334 1314
89GL1153 MAX-Z 67 258HF TW PK 2x58W 230/50 1634 1614
89GL1154 MAX-Z 67 218HF E3 TW PK 2x18W 230/50 858 838
89GL1155 MAX-Z 67 236HF E3 TW PK 2x36W 230/50 1468 1448
89GL1156 MAX-Z 67 258HF E1 TW PK 2x58W 230/50 1768 1748

Aqua Signal pressure watertight luminaire series 0673


Save down to 20 meter water depth. Removable gear tray. Wash resistant.
For deck and deck rails. Zinc coated steel sheet gear tray, powder coated RAL 9016
Clear polycarbonate cover tube, 4 mm thickness and polycarbonate end caps.
G13 lamp base for T8 (T26) fluo lamps of 18 or 36 Watt. (not included)
Fixing by means of 2 clamps (not included) to order separately.
Through wiring on request available.
Cable glands M20x1,5 (cable Ø 6-12mm) M25x1,5 (cable Ø 13-18mm)
Available in 220V/60Hz l.p.f., 220V/60Hz h.p.f.c., 230V/50Hz l.p.f. en 230V/50Hz h.p.f.c.
l.p.f. = low power factor, h.p.f.c. = high power factor corrected l.p.f. with M20 gland = most common

Number Description

89AQ0673005 1x18W M20 230V/50Hz l.p.f.


89AQ0673006 1x18W M20 230V/50Hz h.p.f.c.
89AQ0673007 1x18W M20 220V/60Hz l.p.f.
89AQ0673008 1x18W M20 220V/60Hz h.p.f.c.
89AQ0673705 1x18W M25 230V/50Hz l.p.f.
89AQ0673706 1x18W M25 230V/50Hz h.p.f.c.
89AQ0673707 1x18W M25 220V/60Hz l.p.f.
89AQ0673708 1x18W M25 220V/60Hz h.p.f.c.
89AQ0673305 1x36W M20 230V/50Hz l.p.f.
89AQ0673306 1x36W M20 230V/50Hz h.p.f.c.
89AQ0673307 1x36W M20 220V/60Hz l.p.f.
89AQ0673308 1x36W M20 220V/60Hz h.p.f.c.
89AQ0673805 1x36W M25 230V/50Hz l.p.f.
89AQ0673806 1x36W M25 230V/50Hz h.p.f.c.
89AQ0673807 1x36W M25 220V/60Hz l.p.f.
89AQ0673808 1x36W M25 220V/60Hz h.p.f.c.

89AQ0673B Set fixing clamps 0673


polyamide
89AQ0673C Set fixing clamps 0673
Stainless steel Heavy duty
77-06.2
Aqua Signal pressure watertight LED luminaire series 0673
Fully watertight up to 20 meter water depth. IP68
For deck and deck rails. Zinc coated steel sheet gear tray, powder coated RAL 9016
Clear polycarbonate cover tube, 4 mm thickness and polycarbonate end caps.
Fixing by means of 2 clamps (not included) to order separately.
Cable gland M20x1,5 (cable Ø 6-12mm)
Voltage 110/230V +/-10% 50/60Hz +/-5%
Light color 4000K CRI >80

Number Description Dimension

89AQ0673102000 10W 4000K Ø70x780mm


89AQ0673104000 20W 4000K Ø70x1390mm

Mirror light Glamox TL14


Universal luminaire for marine environment for above bed or bathroom.
Approved by GL for marine use (Germanische Lloyd).
The housing comes in electro-galvanized steel with white epoxy/polyester powder finish white RAL 9016.
End caps are moulded from impact resistant and incombustible plastic.
The diffuser is made of polycarbonate.
IP44 for wall mounting in bathrooms as well other applications.
Available without switch or with 2-pole switch integrated (type S).
Also available with transformer and universal razor socket
with selector 110-230V (type U).
Also available with Schuko socket (type SC) and Switch + Schuko socket (type SSC).
One cable gland (grommet) for max. Ø 20,5mm cable.
For fluorescent tube lamps T5 and T8 (not included).

Number Description Dimension Extra

89GLTL14000753 1x8W 220/240V 50/60Hz 316x58x107mm -


89GLTL14000760 1x8W 220/240V 50/60Hz 316x58x107mm S
89GLTL14000777 1x8W 220/240V 50/60Hz 316x58x107mm SSC
89GLTL14000814 1x15W 220/240V 50/60Hz 486x58x107mm -
89GLTL14000845 1x15W 220/240V 50/60Hz 486x58x107mm S
89GLTL14000821 1x15W 220/240V 50/60Hz 486x58x107mm U
89GLTL14000852 1x15W 220/240V 50/60Hz 486x58x107mm SU
89GLTL14000869 1x15W 220/240V 50/60Hz 486x58x107mm SSC
89GLTL14000913 1x18W 220/240V 50/60Hz 637x58x107mm -
89GLTL14000944 1x18W 220/240V 50/60Hz 637x58x107mm S
89GLTL14000920 1x18W 220/240V 50/60Hz 637x58x107mm U
89GLTL14000951 1x18W 220/240V 50/60Hz 637x58x107mm SU
89GLTL14000968 1x18W 220/240V 50/60Hz 637x58x107mm SSC
89GLTL14001019 1x36W 220/240V 50/60Hz 1247x58x107mm -
89GLTL14183852 LED 15W 220/230V 50/60Hz 486x65x107mm SU
89GLTL14183821 LED 15W 230V 50/60Hz 486x65x107mm U
89GLTL14183920 LED 18W 230V 50/60Hz 637x65x107mm U
89GLTL14183951 LED 18W 230V 50/60Hz 637x65x107mm SU
89GLTL14184852 LED 14W 230V 50/60Hz 486x65x107mm SU

77-06.3

También podría gustarte