Honeywell
CERTIFICATE OF INSPECTION & TEST
Honeywell Analytics is committed to providing proven, tested and reliable products.
Each instrument is manufactured and tested according to 1S09001 documented
Procedures and calibrated prior to final inspection.
Product name: [Sensor
Saarepaine co (Ut/Enmetro
‘Serial No:
|K0254714140048
Product, 3 No:
| SPXCDULNRX
TTEMS TESTED
[Magnetic key operation — Pass
|LCD operation - Pass [current output at fault (10.3mA) — Pass
|Back Light Operation — Pass (Current output at inhibit condition (2mA) — Pass
|Software version ~ F/W_6M, SRS_1, EEP_15 _ |Visual inspection — Pass
Relay Operation ~ Pass [Standard accessories ~ Pass
IRS485 Operation — W/A
[Gas(or Current) Applied: Fresh Air
mA Output: (iF applicable)
|3.993 mA / 4.00 mA
[Concentration Display
JO YoLEL / O96LEL
"SPAN ADJUSTMENT.
a Current) Appli
[Concentration Display: (if applicable)
|51 %LEL / 50 %LEL
FULL ADJUSTMENT
[Gas(or Current) Applied: [Concentration: [Acceptable Range:
N/A N/A
Jma Output: (if applicable) [Concentration Display: (if applicable)
N/A w/a
It is hereby confirmed that the above unit has been inspected and found free from
manufacturing defects and to operate correctly prior to despatch from the factory.
[inspected & Tested by = (Date : Mar- 31-2014
Users are reminded that all instruments should be calibrated as part of the on site
commissioning procedure to prove the operation of the overall gas detection system.
Refer to product manual for details.
Honeywell Analytics HAA100036 3001T1106_4