5-139, ‘The engine of the helicopter i delivering 800 bp
to the rotor shaft AB when the blade is rotating at
1500 rev/min, Determine to the nearest nthe diameter of
the shaft AB if the allowable shear stress is Tajtow = 8 ksi
and the vibrations limit the angle of twist of the shaft to
0.05 rad. The shaft is 2 ft long and made of L2 tool steel.
Insarnal Forge
sey (ane in
= 1s (222) 8 son eral
550s
Ponte S282) un enon ms Angi of Tris Asef ews iin
nm
1h aM ca. 8
22 13)212
“Allow oble Shear Siress: Assume flare due w shear sess F(P*a10)010,
te
wt a=1966i0
cud = 2218008) Shea ses ar cono ei.
a ‘1
ied 225 damsersiae Ane
d=2716in Ans‘he wocircula rod segments, one of aluminum and
‘of copper, are fixed to the rigid walls such that
4 gap of 0008 in. between them when Ty = 60°F.
temperature T is required in order to just
fap? Each rod has, a diameter of 125 in,
sy \/°F, Ey = 10(10") ksi, ae, = 9.4(10°)/°F,
0) ksi Determine the average normal stress in
fT; = 200°F.
ot Exposion To cts Be 86
Gyn oaT Lyra 8T hy
oun = 110°), 6018) +9.4( 10) -VeH
Reuse Ane
ony:
0018 = By}a.~ (Seda, + (Sr
‘9.018 =34( 104) (200-60) ~
(Da
Ra)
TABU
ra)
413(10°*) (200-6090)
kip
reage Normal Stress +
F_ tass
oan i= HS cites Ane
er eer)‘The stress-strain diagram for a polyester resin Is
Inthe figure. Ifthe rigid beam is supported by a strut
‘and post CD, both made from this material, and
cid 10 a load of P = SOKN, determine the angle of
the beam wien the load is applied. The diameter of
{is q0) mm and the diameter of the post is 89 mm.
dea _ 195810)
te = TSH) gone mim
= cual = 0.009885(2000) = 19.77 mm
= cealen = 0.002471(500) = 1.236:mm
a= 070" An
‘ | fomin
0 001 0.02 003 004 oenine
ssenm