Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Production risers
PetroWiki
Large integrated drilling and production facilities employ Dedicated Drilling Risers which have been part of the industries practice for
decades.[1] In 1984 Conoco Hutton facility in the North Sea was the first facility to use the top-tension riser system. In the Gulf of
Mexico there are several facilities using the dedicated drilling risers. The drilling risers’ work as an extension from the wellbore to the
drilling rig which is located on the floating production system. The typical riser configuration considered consists of the subsea
wellhead connector assembly, tapered stress joint, drilling riser, tensioning joint, riser landing joint, hydro-pneumatic tensioning system
and a surface blow-out preventer.[1] Risers systems have to sustain surface floater induced wave motions and direct environmental in
addition to functional loadings.[2]
Contents
1 Top tension risers
2 Flexible risers
3 Steel catenary risers
4 Hybrid risers
5 Free standing flexible riser (FSFR)
6 Multi-Lines free standing riser
7 Deep steep riser
8 References
9 Noteworthy paper in OnePetro
10 External links
11 See also
12 Category
Top tension risers are suitable for only floater applications with limited lateral excursions.[1] These should not be used for semi-
submersibles or on ship shaped floaters. These risers are supported by hydraulic heave compensator system or individual buoyancy
tanks as the vertical risers must always have tension throughout their length.
Flexible risers
In shallow conditions the unbound flexible pipes are the original technology for the
floating production system and are the main riser system used in production. With
additional buoyancy modules which are used to form loops which uncouple the riser
bottom section from the floating unit motions. The result of the configurations allows
risers to be more suitable to the different field conditions by allowing different flexibility
such as the “Lazy Wave”, “Steep Wave”, “Lazy-S”, “Steep-S”, “Pliant Wave”, etc.
Flexible riser systems are appropriate for shallow water and cyclonic conditions and are
used in a number of fields located in West Africa, Gulf of Mexico, Asia Pacific regions,
Flexible pipe with multi-layered structures
Brazil and in the North Sea. The recent development of composite materials that resist
and riser configurations
corrosive fluids, combined with high temperature and high pressure limits, the flexible
risers are now qualified for 3,000m water depth. [2]
Hybrid risers
The development of the “Hybrid Riser” was brought about by the need of to compliment the conventional top tensioned risers, flexible
or catenary risers. Hybrid Riser incorporated steel and flexible pipe technologies this allows the flexible pipe to absorb most of the
dynamic motions of the riser while the Steel Catenary Riser or vertical leg is connected to a sub-surface buoy for support. These Hybrid
https://petrowiki.org/Production_risers#Top_tension_risers 2/6
9/18/2019 Production risers - PetroWiki
Risers systems have been developed mainly for the reduction of the decoupling effect between the floating production unit and the
risers.
The hybrid systems would bring about a more cost effective, technical solutions, and higher productivity providing access to deeper
field developments. “The most common used Hybrid Risers are the Free Standing Hybrid Riser with a single leg configuration or
several bundled in a Hybrid Tower Riser”. [2]
1. A vertical leg of the riser system for seabed to the subsurface buoy is a flexible
pipe for a low bending radius of the pipe for the double-catenary installation
2. The traditional slender buoyancy tank is replaced by a flat buoy
3. The flat buoy minimizes the Vortex Induced Motions and Rotations.
The FSFR buoy can be fabricated offshore, lifted into the sea and towed to the site at sea
surface where it is ballasted to its final sub-surface location. In most cases a lower Free standing flexible riser
capacity flexible pipe installation adding to lower cost for the project.[2]
https://petrowiki.org/Production_risers#Top_tension_risers 3/6
9/18/2019 Production risers - PetroWiki
The Multi-Line Free Standing Riser system is currently developed to provide the
functional requirements as a combined assembly in a single standing riser system. The
functional requirements are a production line combined service line for round-trip
rigging, a water ejection line to maintain reservoir pressure, and a gas-lift at the
production riser base for produced fluid.[2] The Multi-Line Free Standing Riser features
many of the following components: a single buoyancy tank, a stem pipe-in-pip riser
fitted with top and lower assemblies, a Top Riser Assembly allowing for the connection
of several flexible jumper in double-catenary shape, a Lower Riser Assembly performing
the connection of the riser foundation, two lateral risers for water injection and service, a
foundation system, and three Riser Based Jumpers for production, service, and water
injection.
References
Multi-Lines free standing riser
1. Hull, M. E., Rees, J., Deegan, F. J., Botto, A., & Whooley, A. 2011. Risk-Based
Case Study of Floating Facility Drilling Riser Design Concepts in Deepwater Gulf
of Mexico. Offshore Technology Conference. http://dx.doi.org/10.4043/21873-MS.
2. Luppi, A., Cousin, G., & O’Sullivan, R. 2014. Deepwater Hybrid Riser Systems. Offshore Technology Conference.
http://dx.doi.org/10.4043/24802-MS
https://petrowiki.org/Production_risers#Top_tension_risers 4/6
9/18/2019 Production risers - PetroWiki
Jung, D., Kim, H., & Moon, D. (2010, January 1). Dynamics of Large Diameter Riser. International Society of Offshore and Polar
Engineers. https://www.onepetro.org/conference-paper/ISOPE-I-10-042
Ng, D. J. T., Teng, Y. J., Magee, A. R., Ahmad Zukni, N. B., Aramanadka, S. B., Abdul Malik, A. M., … Abdul Ghani, M. P. 2014.
Riser VIV Suppression Device Test. Offshore Technology Conference. http://dx.doi.org/10.4043/24874-MS
Whitfield, S. (2015, April 1). Current Developments in the World of Risers. Society of Petroleum Engineers.
http://dx.doi.org/10.2118/0415-0034-OGF
External links
Drilling riser (https://en.wikipedia.org/wiki/Drilling_riser)
See also
Offshore and subsea facilities
(http://petrowiki.org/Offshore_and_subsea_facilities%20http://petrowiki.org/Offshore_and_subsea_facilities)
https://petrowiki.org/Production_risers#Top_tension_risers 5/6
9/18/2019 Production risers - PetroWiki
Category
Categories: 1.10.5 Offshore drilling units 4.2 Pipelines, flowlines, and risers 4.2.4 Risers DW All Pages DW Complete
Benchmark POST DW
https://petrowiki.org/Production_risers#Top_tension_risers 6/6