Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Assembly/Disassembly
Installation of Operating System(Windows 7,8,10)
Installation of Device Drivers
Installation of Software and other Utilities
NETWORKING
Cabling
Setting up Router
Setting Up Access Point
SERVERS
Installation of Servers
Configuring servers
Adding Roles
Creating Users
Joining Client PC’s to the Server
Remote Desktop Connection
Folder Redirection
Printer Deployment
2)Initial Configuration
Open Server Manager
Make sure that the LAN is connected not x
1. Change Computer Name
Click Local Service>Locate Computer>System Properties>change
2. Enable Remote Desktop
Disable>Allow>Ok
3. Configure Ethernet
Click IPV4>Right click> Properties>IPV4 CTCP/IPv4> Use the
following
IP Address: 143.44.0.1
Subnet Mask: 255.255.0.0
Default Gateway: 143.44.0.2 (Routers IP address)
DNS: 143.44.0.1
Back to Local Server
4. Set Date and Time
Time Zone:+8
5. Restart the PC to Apply the following.
4) Add Roles
Server Manager Dashboard
Add Roles and Features
>next >next>next (Look for your IP address if it is connect)
Check the ff:
Active Directory Domain Services
DHCP Server
Print and Document and Services
Remote Desktop Services
>Add features all next next next
Remote Desktop Connection Broker
>Install
>Close
9)Configuring Route
Make sure to turn on your route
Reset your router( Hold up to loses)
Create wire from client to keystone
PC----------L-A-N—C-A-B-L-E-----------Router
>Go to Client PC
>Open Google Chrome and Type the IP address of the router on the bar
D-LINK will appear
2. Configure Wifi
SSID = [ Your Name]
Passkey = P@ssw0rd
Save and Connect
Changing IP address
IP Address: 143.44.0.2
Subnet Mask: 255.255.0.0
*Do it first in your Client PC then do the same procedure to your client2(Laptop). Then
after that do it vise versa the client will be your controller or the one will be connect .
*Always use Administrator Account
12)Folder Redirection
>On your server
>Create a folder in Drive D: > Name it Redirection>Right click share with specific
people or everyone>Add client1 and client2>Read/Rewrite>Click Shared
*Creating GPO
>Server Manager>Tools>Group Policy Management>Expand forest>Expand Domain
name>Right click organizational unit and create a GPO
In this domain and link >”Name”>Redirection>Ok
>Right click GPO that you created and edit
>Group Policy Management Editor
>User configuration
-expand policies
-expand windows settings
-select folder redirection
-DESKTOP >right click >basic
-Root Path
How to know the root path
Go to the drive D right click > properties >copy network path then balik sa
(Root Path) then paste
Go to the setting (Desktop Properties)
Uncheck the grant…….user then apply
START MENU (same procedure )
Update the new policy on the client
On client PC>CMD>GPupdate/ force tne enter>yes
Other user >click client 1
Check kung pumasok ung file sa server
-Go to server >folder redirection>double click client 1
-Go to client1 PC >create a folder on your desktop the folder automatically appear on
the server
-Go to your client 2 -same procedure simula sa CMD GPupdate and so on……
14.PRINTER DEPLOYMENT
On your server
*SERVER MANAGER->tools >print management
-print server >expand computer name
-right click print >select add printer
-add new printer using an existing port >add new existing port >next
Add new existing ….select brand and select model >next >share this printer next next
finish
*Create policy
Tools>Group policy management >