Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Specification
F req.
824 ~849 880~915 171 0~1785 185 0~1910
Band[ MHz] 925~960
869 ~894 180 5~1880 193 0~1990
Uplink/Downlink
0~1 24 &
ARFCN r ange 128 ~251 975 ~1023 51 2~885 51 2~810
Mod. Bit rat e/ 270. 833kbp s 270. 833kbp s 270. 833kbp s 270. 833kbp s
Bit Period 3. 692us 3. 692us 3. 692us 3. 692us
T im e Sl ot
576 .9us 576 .9us 57 6.9us 57 6.9us
Period/F rame
4.61 5ms 4.61 5ms 4.6 15ms 4.6 15ms
Period
Power Cla ss 5pcl ~ 19pcl 5pcl ~ 19pcl 0pcl ~ 15pcl 0pcl ~ 15pcl
T DM A Mu x 8 8 8 8
2-1
2-2
Main Function
- Quad Band (GSM850+EGSM900+DCS1800+PCS1900)
- GPRS Rx/Tx, EDGE Rx
- FM Radio
- Bluetooth v2.0 + EDR
- TFT LCD 2." 256K Color
- VGA 1/10" CMOS Camera
- MP3 Player
- Micro SD Card (Up to 8GB)
3-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
4. Array course control
4-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
Software Downloading
4-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
Additionally you can select the maximum transfer speed OptiFlash will use to
communicate with the phone. However, OptiFlash will use a slower speed if
either the PC's or the phone's serial hardware is incapable of handling the
selected speed
4-4
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
Downloader will upload the binary file as below for the downloading.
4-5
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Array course control
4-6
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10. Reference data
Reference Abbreviate
10-1
― Be careful to use a kind of magnetic object or tool, because performance of parts is damaged by
the influence of magnetic force.
― Surely use a standard screwdriver when you disassemble this product, otherwise screw will be
worn away.
― Repair after separate Test Pack and Set because for short danger (for example an overcurrent
and furious flames of parts etc) when you repair board in condition of connecting Test Pack and
tuning on.
― Take specially care of soldering, because Land of PCB is small and weak in heat.
― Surely tune on/off while using AC power plug, because a repair of battery charger is dangerous
when tuning ON/OFF PBA and Connector after disassembling charger.
― Don't use as you pleases after change other material than replacement registered on SEC System.
Otherwise engineer in charge isn't charged with problem that you don't keep this rules.
1-1
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Safety Precautions
Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD
(Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below.
You can prevent from ESD damage by static electricity.
― Remove static electricity remained your body before you touch semiconductor or parts with
semiconductor. There are ways that you touch an earthed place or wear static electricity prevention
string on wrist.
― Use soldering removing tool to break static electricity. Otherwise ESD will be damaged by static
electricity.
― Don't unpack until you set up ESD on product. Because most of ESD are packed by box and
aluminum plate to have conductive power,they are prevented from static electricity.
― You must maintain electric contact between ESD and place due to be set up until ESD is
connected completely to the proper place or a circuit board.
1-2
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization