Documentos de Académico
Documentos de Profesional
Documentos de Cultura
PC210-8M0
PC210LC-8M0
PC
210
HYDRAULIC EXCAVATOR
Photos may include optional equipment.
CIN: L99999MH1946PLC004768
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
Walk-AROUND HORSEPOWER
Gross: 110 kW 147 HP / 2000 min-1
Net: 103 kW 138 HP / 2000 min-1
OPERATING WEIGHT
PC210-8M0: 20,700 kg
PC210LC-8M0: 21,600 kg
Ecology and Economy Features BUCKET CAPACITY
0.85-1.70 m3
• Low fuel consumption by total control of
the engine, hydraulic and electronic system.
Reduces fuel consumption by approx. 7%
Information & Communication Technology —
• Large multi-lingual high resolution LCD monitor
• Supports efficiency improvement
• Low emission engine.
• Equipped with the EMMS monitoring system
A powerful, turbocharged and air-to-air
aftercooled Komatsu SAA6D107E-1 provides See page 8.
103 kW 138 HP.
• EPA Tier 3 and EU Stage 3A emissions Easy Maintenance
equivalent. • Long replacement interval of engine oil, engine oil
• Economy mode improves fuel consumption. filter, and hydraulic filter
• ECO-gauge for energy-saving operations • Remote mounted engine oil filter and fuel drain
valve for easy access
• Extended idling caution for fuel conservation
• Equipped with the fuel pre-filter as standard (with
water separator)
• Low operation noise. • Side-by-side cooling concept enables individual
cooling modules to be serviced.
Using the low-noise engine and methods to cut Large Comfortable Cab See page 9.
noise at source.
• Low vibration with cab damper
mounting
See pages 4 & 5.
• Highly pressurized cab with optional
air conditioner
• Operator seat and console with
armrest that enables operations in the
appropriate operational posture.
See page 6.
Safety Design
• Slip-resistant plates for improved foot grid
• Rear view monitoring system for viewing the work
area to thea rear of the machine (optional)
See page 7.
2 3
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
AECOLOGY
DVANCED&EEQUIPMENT
CONOMY FMEATURES
ONITORING
Low emission engine Working Modes Selectable
Komatsu Technology Komatsu SAA6D107E-1 has low NOx emission, and The PC210-8M0 excavator is equipped with six
is EPA Tier 3 and EU Stage 3A emissions equivalent. working modes (P, E, L, B, ATT/P and ATT/E mode).
Each mode is designed to match engine speed and
pump output to the application. This provides the
flexibility to match equipment performance to the job
at hand.
Working Mode Application Advantage
P Power Mode
• Maximum production/power
• Fast cycle times
• Good cycle times
E Economy Mode
• Better fuel Economy
B Breaker Mode • Optimum engine RPMs and hydraulic flow
L Lifting Mode • Suitable attachment speed
Attachment Power • Optimum engine RPMs
ATT/P
Komatsu develops and produces all major Mode • Hydraulic flow 2 way, Power mode
components, such as engines, electronics Attachment • Optimum engine RPMs
ATT/E
Economy Mode • Hydraulic flow 2 way, Economy mode
and hydraulic components, in house. With this
“Komatsu Technology,” and adding customer
feedback, Komatsu is achieving great Low Operation Noise
advancements in technology. Enables a low noise operation using the low-noise
To achieve both high levels of productivity engine and methods to cut noise at source.
and economical performance, Komatsu has
developed the main components with a total
control system. The result is a new generation Low fuel consumption
of high performance and environment-friendly
The newly-developed Komatsu SAA6D107E-1 engine
excavators.
enables NOx emissions to be significantly reduced Lifting Mode
with the accurate multi-staged fuel injection by the When the Lifting mode is selected, lifting capacity
engine controller. It improves total engine durability is increased 7% by raising hydraulic pressure.
using the high pressure fuel injection system
developed specifically for construction machinery.
This excavator significantly reduces hourly fuel ECO-gauge that Assists Energy-saving
consumption using the highly-efficient matching
1 Reduced fan speed Operations
techniques of the engine and hydraulic unit and
also provides features that promote energy-saving 2 Large capacity radiator Equipped with the ECO-gauge that can be
operations such as the E mode and ECO-gauge. 3 Electronically controlled common rail engine recognized at a glance on the right of the multi-
4 Multi stage injection function color monitor for environment-friendly
5 Sound insulation cover energy-saving operations. Allows focus on
6 Low noise muffler operation in the green range with reduced CO2
emissions and efficient fuel consumption.
Idling caution
To prevent unnecessary
fuel consumption, an
idling caution is displayed
on the monitor, if the
Fuel Consumption 7% reduced engine idles for 5 minutes
vs. PC210-8 or more.
based on typical work pattern collected via KOMTRAX
Fuel consumption varies depending on job conditions
4 5
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
WORKING ENVIRONMENT
Safety Design
Slip-resistant Plates Large Side-view, Rear, and Sidewise Mirrors
Highly durable slip resistant plates maintain superior Enlarged left-side mirror and addition of rear and
traction performance for the long term. side mirror allow the PC210- 8M0 to meet the new
ISO visibility requirements.
6 7
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
Maintenance Function
Eco-guidance Eco-guidance menu
The monitor informs
replacement time of oil and
filters on the LCD when Caution and periodic maintenance Monthly Status Summary
the replacement interval is
reached.
8 9
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
10 11
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
O Machine cab height 2,095 mm 2,095 mm Sand, gravel, clay, trenching and 1.0 m3 1242 mm 1358 mm 810 kg O O
General digging
loading & general construction 1.1 m3 1348 mm 1463 mm 870 kg O c
P Machine cab width 2,710 mm 2,710 mm
Granite Granite/ Marble quarry 0.85 m3 1200 mm - 876 kg O 6
Q Distance, swing center to rear end 2,755 mm 2,755 mm
Rock Blue Metal Quarry 0.95 m3 - 1350 mm 865 kg O 6
Light-Duty digging Dry, loose soil and loading 1.2 m3
1415 mm 1534 mm 910 kg c r
Coal Coal Re-handling 1.7 m3
1575 mm - 865 kg r 6
12 13
PC210-8M0 HYDRAULIC EXCAVATOR PC210-8M0
Hydraulic Excavator
WORKING RANGE
lifting capacity with LIFTING MODE
* Load is limited by hydraulic capacity rather than tipping. Ratings are based on I SAE Standard No. J1097. Rated loads do
not exceed 87% of hydraulic lift capacity or 75% of tipping load.
14 15