Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Push-in/threaded L-fitting
QSML-M5-4
Quick Star
Mini series
Specially adapted accessories for Festo’s miniature
pneumatics series
Tubing ODs of 3, 4 and 6 mm, as well as M3, M5, M7, R1/8
and G1/8 connecting threads are included in the mini-series.
Standard series
A large selection of push-in fittings for tubing ODs of 4, 6, 8,
10, 12 and 16 mm and connecting threads from R1/8 to
R1/2, and G1/8 to
G1/2.
Special series
:- Flame retardant per UL 94 V0
- Corrosion and acid resistant
t- Temperature range to max. 150° C with excellent corrosion
protection
- Antistatic
:Metric thread
- With sealing ring
R thread
G thread
In accordance with DIN ISO 228-1
- With sealing ring
- The sealing ring better compensates for thread tolerances.
- Shorter thread
- Uniform installation depth
- Interchangeable sealing ring
- Sealing outside of the thread with captive sealing ring at
front made of PBT
- All internal threads from G1/8 to G1/2 are incompliance
with DIN ISO 228-1.
Several Quick Star push-in fittings can also be installed with
an Allen key. Make sure that the Allen key is not inserted too
far into the
fittings to prevent the risk of damage to components behind
the fitting.
Note
Interference may be caused at function fittings when
screwed too far into connection threads. The insertion depth
and the recommended
tightening torque must be observed. Damage may otherwise
occur if the recommended tightening torque is exceeded by
more than 50%.
Barbed fitting series
These connectors make tubing connection easier, especially
for mounting to control cabinets, for mounting frames and for
the M5
compact system.
- With barbed fitting
- For standard ID compressed air tubing
- For 2, 3, 4 and 6 mm tubing IDs
- M3 and M5 metric thread
- G1/8, G1/4 and G3/8 G thread
- Corrosion and acid-resistant variants
Accessories
Connecting pliers ZMS
Disconnecting pliers ZDS
Page:1
Feature Data/description