Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Sample calculation: annual saving from power generation with the Vitovalor PT2
If put to best use, one fuel cell can generate 18 kWh of power per
4200 kWh
day (6200 kWh/year). Power generation of 4000 to 4500 kWh is (max. 6200 kWh
possible)
assumed in a "typical" detached house
From exporting power, we get: 1680 kWh x €0.05 per kWh = €84 €84
Generate power and store it efficiently. Viessmann offers perfectly matched systems for this. So that you can
then use the power you generate when you need it – such as for your electric car.
The ideal combination for greater The benefits for new builds
independence and lower energy costs
Lower your future energy bills
1. Vitovalor PT2 Save up to €714 in energy costs each year
With up to 30.8 kW, this fuel cell heating Achieve up to 85 % independence with a CHP system,
appliance delivers sufficient thermal output to small photovoltaic system and power storage system
cover the heat demand of a detached house.
And the electrical energy generated each
day (up to 18 kWh) is enough to satisfy the
demands of an average household.
Comprehensive and clear: subsidy and on completing the electronic registration form
Public subsidies application guidelines for the Federal Office for Economic Affairs and
and subsidies for your power-generating Benefits year after year: electricity
heating system. You will also find information subsidy and energy tax rebate
about which applications must be lodged The total amount of electricity must be
and by when, in order to meet all necessary reported to the utility by 31 December each
requirements for the subsidy. The guide is year. It is worthwhile as the subsidy according
available online at www.viessmann.de. to the German CHP Act is 8 cents/kWh for
power exported to the grid and 4 cent/kWh
Fully prepared and ready to go: for power consumed on site. Furthermore,
applications to power supply utilities under the energy tax law (EnergieStG),
and BAFA your energy tax payments are refunded to
The CHP bonus is deducted directly from you at the end of the year. You'll find all the
your electricity bill, so applications need to necessary information and forms in the guide.
be sent to your power supply utility before Germany's state governments and power
and after commissioning. All applications, supply utilities also offer numerous subsidy
required evidence and the maintenance log programmes.
in the Viessmann guide are valid throughout
Germany and have been completed for you, A complete overview and detailed information
so all you need to do is send them off. The can be found on the internet at
guide also contains step-by-step instructions www.viessmann.de or by asking your
Viessmann trade partner.
Practical tips
As a power generator,
you can register as
a small business.
Discuss this with
your tax adviser.
Count on it:
the online Viessmann subsidy
database shows you which
subsidies are available for your
location.
6/7
Advice and access to sales, installation and customer service support: Viessmann trade partners receive
regular training and have in-depth knowledge of our products. Expertise that you can benefit from, too.
With our trade partners, you're in good Services from your trade partner
hands
Viessmann is the only manufacturer to supply Free, no-obligation and individual consultation, even on site
all products from a single source, so that Calculation of the actual power, heating and DHW demand in your household or
users can make effective and economical use property
of the power they generate. Your Viessmann Clear calculation of savings on heating costs and power
trade partner will be happy to advise you in Calculation of the payback period, after which the new Vitovalor PT2 will have
more detail, and not just on the technical paid for itself through energy savings
options. They will also calculate the subsidies Support with applying for subsidies
according to your particular setup and help
you research funding options and complete Ask your Viessmann trade partner about our service packs as well.
application forms.
Fuel cell Vitovalor PT2
heating appliance 0.75 kWel, 0.9 to 30.8 kW th
8/9
)'")"%?#'
A fuel cell heating appliance generates both heat and sufficient power for your home.
This form of dual energy efficiency is achieved without the use of fossil fuels and so
protects the environment and natural resources.
Fuel cells convert natural gas into power Innovative heating system for modern
and heat. However unlike with conventional residential buildings
systems, this does not involve the burning The Vitovalor PT2 is perfect for well insulated
of fossil fuels. Instead, a chemical process detached and two-family houses with a low
known as "cold combustion" is used, in which heat demand. The fuel cell heating appliance
hydrogen reacts with oxygen to produce works particularly efficiently at low return
power and heat. temperatures, for example, when used with
underfloor heating. However, even radiators
Proven, reliable, durable: technology with return temperatures of up to 50 °C are
from Viessmann and Panasonic suitable.
As with all innovations from Viessmann,
reliability and durability are also top priorities Natural gas: perfect for fuel cells
when it comes to the fuel cell heating The fuel cell uses hydrogen as its energy
appliance. This is why a proven fuel cell source. Hydrogen is sourced from natural
module from Panasonic is used. Viessmann gas, which is available almost everywhere in
has integrated this fuel cell, proven in tens our infrastructure. E or LL gas can be used
of thousands of applications in Japan, into as required. An upstream reformer converts
a perfectly matched heating system with the natural gas into the essential hydrogen. Energy efficiency label A++
gas condensing boiler, DHW cylinder and The heat generated as a by-product of power for the Vitovalor PT2
control unit. generation is utilised efficiently for both DHW
and central heating.
This makes the Vitovalor PT2 fuel cell module
a sustainable investment, ensuring long The compact fuel cell heating appliance
runtimes with a service life of more than provides a household with heat, covers the
80,000 operating hours. entire power demand and, whilst doing so,
saves up to 40 percent energy compared to
the separate generation of heat and power.
The technology creates greater independence
from rising electricity prices and protects the
environment at the same time by reducing
CO2 emissions by up to 50 percent compared
to separate power and heat generation.
Fuel cell Vitovalor PT2
heating appliance Fuel cell module: 0.75 kWel, 1.1 kW th
Total output: 0.9 to 30.8 kW th
10 year guarantee*
on stainless steel heat exchangers for
oil or gas condensing boilers up to 150 kW
1
* For conditions and product
overview, see
www.viessmann.de/garantie
Vitovalor PT2
Modular storage system Large and clearly laid out: the display
Different power generators and varying power The large screen in the programming unit
consumption requirements mean that power displays various symbols that provide
storage units must be available in a range information at a glance on prevailing charging
of sizes. This is why the Vitocharge power and operating conditions. One feature of
storage system is modular in design. A single particular interest to users is the display
unit can accommodate up to four battery that shows when they have achieved self-
modules, each with a storage capacity of sufficiency, i.e. their home is supplied without
3.2 kWh – up to 12.8 kWh in total. They are drawing additional electricity from the public
particularly straightforward to install. The grid. When this occurs, the screen shows
battery modules slot in like drawers and start mains consumption as 0.0 kW.
up automatically.
Perfect team: complement the installation
High capacity with a photovoltaic system
As a single phase power storage system, As less heat is required in summer, less
the Vitocharge is designed to optimise cost electricity is generated as well. In order to
effective on-site consumption. In combination remain as independent of the public power
with the Vitocharge, the Vitovalor PT2 provides grid as possible, the ideal solution is to
backup during power failures. In this scenario, integrate a PV system. This will cover the
the system switches to mains substitution entire power demand in summer.
mode and continues to supply all of the The Vitocharge has a storage
capacity of up to 12.8 kWh.
electrical appliances in the home.
Greater independence from power supply utilities and rising electricity prices
Lower electricity bills thanks to optimised consumption of power generated
on site
Continued supply during power failure with mains substitution mode
(changeover box required as an accessory)
Straightforward installation thanks to preassembled unit
Battery modules are simply slotted into place (Plug & Play)
Individual configuration, ideal supplement to existing energy systems
Charging infrastructure for electric vehicles
Straightforward heat
distribution
Even with a mix of heat transfer
types, such as underfloor
heating, radiators and convectors,
straightforward heat distribution is
still ensured in Dennis Wagner-Noll's
two-family house thanks to the
Vitovalor 300-P.
Vitovalor PT2
Rated heating output (60/40 °C) kW th 0.9 – 11.4 0.9 – 19.0 0.9 – 24.5 0.9 – 30.8
Frequency Hz 50
Weight
– Complete unit kg 326
– Standard unit kg 197
– Tower cylinder kg 129
Photovoltaic system
Power storage
system
"The whole is greater than the sum of its Viessmann system technology includes
parts." In accordance with this philosophy, everything that characterises a reliable and
Viessmann does not simply supply individual economical heating system: the control
heating equipment components that meet unit with wireless remote control, efficient
the high Viessmann standards for quality, Vitocell DHW cylinders for the highest DHW
reliability and effectiveness. In addition, convenience, and radiators.
all products are part of a matching overall
concept, where all components complement
one another. After all, only perfect interaction
between all system parts can draw out the
maximum potential of our innovative leading
technology.
16/17
Connectivity
With Vitoconnect and a smartphone,
controlling Viessmann heating systems
couldn't be easier. Heating systems can be
controlled with the ViCare app. All apps are
available for mobile terminal devices running
under iOS or Android operating systems.
Remote monitoring
With special Viessmann remote monitoring
software, your heating contractor can access
your heating system quickly via the internet.
This saves time and money on maintenance
and service.
Photovoltaic systems
Turn the sun into your energy supplier for
electricity. This is worthwhile, as solar power
can already be generated at significantly lower
cost than drawing domestic power from the
grid.
DHW cylinders
DHW convenience for every demand:
Viessmann offers plenty of choice with its
Vitocell range of cylinders. Here, you will find
exactly the right DHW cylinder to suit your
requirements – depending on water demand
and installation options.
System accessories
In addition to the high quality Viessmann
products, we also offer system components
from other well known manufacturers with
the Vitoset range of accessories.
The company
Viessmann Group
Copyright Viessmann
Duplication and alternative use only with prior written consent.
Subject to technical modifications.