Documentos de Académico
Documentos de Profesional
Documentos de Cultura
1
TABLE OF CONTENTS
Threadlocking 3
Locking of Threaded Fasteners
Thread Sealing 7
Sealing Threaded Components
Retaining 9
Securing Cylindrical Assemblies
Gasketing 11
Sealing of Flanges
Lubricants 15
Greases
Anti-Seize Lubricants 17
Cleaners, Degreasers 19
& Rust Treatment
Application Q&As 29
General, Gasketing,
Threadlocking & Bonding
Engine applications 33
loctite® Product
description Index 43
Caterpillar Product
Number Index 46
solutions guide for cat dealers 2
Threadlocking Loctite® 222™ Threadlocker
Medium Strength
Locking of Threaded Fasteners Ideal for fastener diameters of ¼" (6 mm)
and smaller, long engagement length
fasteners, and components requiring
• Prevent loosening from occasional adjustment. Apply to threaded
shock and vibration parts before assembly. Controlled
lubricity for accurate clamp loads. Parts
• Single component – clean and can be disassembled with hand tools.
easy to apply Approved for use in or around food
processing areas.
• Can be used on various sizes of
Typical Use: Small screws under ¼".
fasteners – reduce inventory costs
Color/Viscosity: Blue, Liquid
• Seal threads Item Container Size Pack
• Stop rust and corrosion 22221 10 ml bottle 10
22231 50 ml bottle 10
see page 35
3
Loctite® 271™ Threadlocker
High Strength
A high strength, low viscosity threadlocker
for fasteners up to 1" (25.4 mm) in diameter.
Typical Use: For fasteners up to 1"
(25.4 mm).
Color/Viscosity: Red, Liquid
Item Container Size Pack
27121 (Cat # 154-9731) 10 ml bottle 10
27131 (Cat # 155-0695) 50 ml bottle 10
see page 35
5
Tech
Inactive Metals* ACTIVE METALS
(PRIMERS RECOMMENDED) (PRIMERS OPTIONAL)
Plated Parts Silver Iron
WHEN SHOULD I USE A LOCTITE® PRIMER?
Anodized Aluminum Gold Plain Steel
Speed up cure – Significantly speed up the cure time of Loctite® threadlockers when (Alodine, Irridite) Copper
Zinc
assembling metal parts that are cold, have large gaps or deep threads. Titanium Brass
Pure Aluminum
Inactive metal assemblies* – When assembling metal parts with inactive Stainless Steel
Cadmium
Bronze
surfaces, Loctite® primers are recommended to ensure proper performance of Galvanized Steel Nickel
Magnesium
Loctite® threadlockers. Magnetite Steel Manganese
Natural or Chemical Monel™
Please note: Loctite® Anaerobic Machinery Adhesives cure in the absence of air and presence of metal Inconel™ Black Oxide
ions. When assembling inactive metal parts, which are low in metal ions, the use of Loctite® Primers Kovar™
are recommended to ensure proper performance of Loctite® Anaerobic Machinery Adhesives.
Loctite® Anaerobic Machinery Adhesives cure in the absence of air and presence of metal ions. When assembling inactive metal parts, which are low in metal ions, the
use of Loctite® primers is recommended to ensure proper performance of Loctite® Anaerobic Machinery Adhesives.
Breakaway/
Loctite® Item Package Size Fastener Strength/ Cure Time Temperature
Prevail Torque Agency Approvals
PRODUCT Number & Type Size Use (Fixture/Full Strength) Resistance
(lb./in.)
¼" to ¾"
Bolts with
1329837 10 ml bottle (6 mm to -65°F to 300°F
243 ™
1329467 50 ml bottle 20 mm)
light oil 5 min. / 24 hrs. 180/62
(-54°C to 150°C)
NSF/ANSI 61, CFIA
contamination
diameter
¼" to ¾"
High
(6 mm to -65°F to 450°F
272™ 27240 50 ml bottle
20 mm)
temperature 30 min. / 24 hrs. 325/320
(-54°C to 232°C)
CFIA
applications
diameter
¼" to ¾"
QuickStix® 37684 9 g stick (6 mm to Medium 10 min. (3 min. -65°F to 300°F
110/43 NSF/ANSI 61, CFIA
248™ 37087 19 g stick 20 mm) strength with primer) / 24 hrs. (-54°C to 150˚C)
diameter
up to 1"
QuickStix® 37685 9 g stick 20 min. (5 min. -65°F to 300°F
(25 mm) High strength 220/4 CFIA
268™ 37686PR 19 g stick with primer) / 24 hrs. (-54°C to 150°C)
diameter
7091™
18109 1 liter bottle Blue 1.03 Monomer 1 hour None Anaerobics N/A
Primer, Activator
4.5 oz. net MIL-S-22473E for existing designs,
30 to 70
7649™ Primer N™ 21348 wt. aerosol Clear / Green 2 Acetone 30 days
seconds
Anaerobics ASTM D-5363 for new designs,
can NSF/ANSI 61, NSF P1, CFIA
7
Loctite® QuickStix® 561™ PST® Loctite® Thread Seal Tape
Pipe Sealant with PTFE Controlled Strength
Semisolid stick form is convenient, Tape (½" x 520") with plastic spool
portable and less messy. Formulated for and shell. Can be used in applications
fast, reliable curing on metal, tapered pipe with temperatures up to 500°F. Oxygen
threads and fittings. Loctite® QuickStix® service compatible.
561™ PST® Pipe Sealant provides Typical Use: General purpose oxygen
high pressure sealing and withstands service compatible.
continuous operating temperatures of
Item Container Size Pack
-65°F to 300°F (-54°C to 150°C).
39904 ½" x 520" 144
Typical Use: General purpose, Overhead x 0.003"
applications.
Item Container Size Pack Loctite® 7649™ Primer N™
37127 19 g stick 5 A solvent-based primer that features very
long on-part life. Use to speed the cure of
Loctite® 592™ PST® all Loctite® anaerobic products and ensure
Thread Sealant proper cure on inactive metals. Ideal for
Controlled Strength cure conditions below room temperature.
Locks and seals threaded fittings. Parts Item Container Size Pack
may be repositioned up to 24 hours 21348 (Cat # 169-5464) 4.5 oz. net wt. 10
after application. aerosol
Typical Use: Medium strength.
Item Container Size Pack
59231 50 ml tube 10
Pressure
Loctite® Item Package Size Color & Viscosity Temperature Recommended
Resistance Agency Approvals
PRODUCT Number & Type Appearance (cP) Range Primer
(PSI)
-65°F to 300°F
545™ 54531 50 ml bottle Purple 14,000
(-54°C to 150°C)
10,000 7088™ N™ or T™ Agriculture Canada, ABS
-65°F to 400°F
592™ PST® 59231 50 ml tube White 350,000
(-54°C to 204°C)
10,000 NF™ CFIA
9
Loctite® 648™ Retaining Compound Loctite® QuickStix® 668™
Press Fit/High Strength/ Retaining Compound
Rapid Cure General Purpose
A retaining compound recommended for A high temperature retaining compound in
continuous working temperatures up to 300°F a revolutionary semisolid formula. Patented,
(150°C). Fills gaps up to 0.006" (0.152 mm) no-mess package offers added convenience
diametral clearance. Fixtures in 5 minutes. and portability. Ideal for gaps up to 0.005"
Typical Use: Fast fixturing for close fitting (0.127 mm) on the diameter. Withstands
parts. High strength for temperatures to 400°F (204°C).
stainless steel. Typical Use: General purpose,
Item Container Size Pack High temperature.
21444 50 ml bottle 10 Item Container Size Pack
39148 19 g stick 5
Loctite® 660™ Quick Metal®
Retaining Compound
Press Fit Repair
A creamy, non-running gel that is applied onto
cylindrical parts to fill surface imperfections
and repair worn areas. It contains no metal,
but once assembled, it hardens to a strength
that often doubles that of a press fit. Use to
300°F (150°C).
Typical Use: Salvage worn metallic parts.
Item Container Size Pack
Tech
66040 (Cat # 269-1943) 50 ml tube 10
see page 38
Max.
Loctite® Item Package Size Viscosity Temperature Recommended Specific
Gap Fill Cure Speed Agency Approvals
PRODUCT Number & Type (cP) Range Primer Gravity
(Diameter)
540™ 54041 250 ml tube N/A 7,000-12,000 -65°F to 300°F N/A N™ or T™ N/A N/A
MIL-R-46082B for
60921 10 ml bottle -65°F to 300°F Fixture – 10 min. existing designs,
609™ 60931 50 ml bottle
0.005" 125
(-54°C to 150°C) Full – 24 hrs.
N™ or T™ 1.10
ASTM D-5363 for new
designs, CFIA
MIL-R-46082B for
64031 50 ml bottle -65°F to 400°F Fixture – 30 min. 7088™,
640™ 34041 250 ml bottle
0.007" 600
(-54ºC to 204ºC) Full – 24 hrs. N™ or T™
1.2 existing designs,
ASTM D-5363
250,000/
660™ -65°F to 300°F Fixture – 20 min.
66040 50 ml tube 0.020" 1,500,000 N™ or T™ 1.13 CFIA
Quick Metal® Thixotropic
(-54°C to 150°C) Full – 24 hrs.
Fixture –
-65°F to 400°F
QuickStix® 668™ 39148 19 g stick 0.005" Semisolid
(-54°C to 204°C)
30 min. N™ or T™ 1.1228 N/A
Full – 24 hrs.
11
Loctite® 598™ Black, High Loctite® 518™ Gasket Eliminator®
Performance RTV Silicone Flange Sealant
Gasket Maker Forms a flexible, solvent-resistant seal that
Fast-curing formula. Sensor-safe, low will not tear or decay. Seals to 300˚F (149˚C)
odor, noncorrosive. Meets performance and and fills gaps to 0.050" (1.27 mm). Can be
specs of OE silicone gaskets. Retains used on flexible metal assemblies, including
high flexibility, oil resistance properties. aluminum surfaces. Easy disassembly and
Temperature range: -75°F to 625°F cleaning.
(-59°C to 329°C) intermittent; resists auto Typical Use: Ideal for on-the-spot and
and shop fluids and vibration. emergency repairs, or when
Typical Use: Oil pans, Valve covers, a conventional gasket is out
Timing gear covers. of stock.
Item Container Size Pack Tech Item Container Size Pack
59830 70 ml tube 12 51831 50 ml tube 1
see page 39
Loctite® Superflex®
Red High Temp RTV Silicone
Adhesive Sealant
Makes gaskets that resist temperatures to
600°F (315°C) intermittent. Resists aging,
weather, and thermal cycling without
shrinking, cracking or hardening. Fills gaps
to 0.25" (6.35 mm).
Typical Use: Automotive gasketing
applications.
Item Container Size Pack
59630 (Cat # 4C-9614) 80 ml tube 12
59675 (Cat # 8T-9013) 300 ml cartridge 10
40465 190 ml power can 6
Loctite® Hi-Tack
Gasket Sealant
Red-colored, liquid sealant that holds gaskets
in place during assembly. Seals and bonds
rubber, cork, paper, felt, metal, and asbestos
gaskets. Sets quickly to a very tacky film.
Suitable to 500°F (260°C). Contains no ozone-
depleting chemicals.
Typical Use: Improved heat transfer,
Repositionable.
Item Container Size Pack
1540591 (Cat # 138-8436) 1 pint brush-top 12
(formerly 30525) can
30524 0.25 pt. brush-top 12
can
13 30526 9 oz. aerosol 12
Loctite® Item Temperature Oil Fixture/
Package Size & Type Color Agency Approvals
PRODUCT Number Range Resistance Cure Time
38657 50 ml tube -65°F to 300°F Primed – 1 to 24 hrs.
5127™ 17430 300 ml tube
Blue
(-54°C to 150°C)
Excellent
Unprimed – 4 to 24 hrs.
N/A
Oil/water
-75°F to 625°F Tack Free – 10 min.
5999™ 21744 300 ml cartridge Grey
(-59°C to 329°C)
resistant,
Full Strength – 24 hrs.
N/A
instant seal
-65°F to 400°F Unprimed – 4 to 24 hours
510™ 51031 50 ml tube Red
(-54˚C to 204˚C)
Oil resistant
Primed – 30 minutes to 4 hours
N/A
-65°F to 400°F
Gasket Sealant 1 30511 3 oz. tube Reddish-Brown
(-54°C to 204°C)
Oil resistant Full Strength – 24 hrs. CFIA
-65°F to 400°F
Gasket Sealant 2 30514 3 oz. tube Black
(-54°C to 204°C)
Oil resistant Remains Tacky N/A
American Bureau of
RTV 587™ -75°F to 500°F Tack Free – 30 min.
40462 190 ml can Blue Excellent Shipping, UL® Classified
Blue Silicone (-59°C to 260°C) Full Strength – 24 hrs.
for U.S., CFIA, NSF P1
RTV 598™ -75°F to 625°F Excellent oil Tack Free – 30 min. American Bureau
59830 70 ml tube Black
Black Silicone (-59°C to 329°C) resistance Full Strength – 24 hrs. of Shipping, CFIA
59330 80 ml tube
Black
40464 190 ml can
59530 80 ml tube
Clear
59575 300 ml cartridge
-65°F to 450°F Tack Free – 30 min. UL® Listed for U.S.,
Superflex RTV
®
59430 80 ml tube White (-54°C to 232°C)
N/A
Full Strength – 24 hrs. NSF/ANSI 51, CFIA
Clear
51388 300 ml cartridge
Non-Corrosive
15
Loctite® Silicone Lubricant Loctite® Freeze & Release
Multipurpose lubricant stops sticking, Instantly chills seized and rusted parts
friction, squeaking and binding of moving (bolts, nuts, studs) down to -45°F (-43°C).
parts. Non-gumming. Will not mar paint, The exceptional shock-freeze action causes
rubber or plastic surfaces. Waterproofs microscopic cracks in the layer of rust,
and electrically insulates. CFIA approved. allowing the lubricating ingredient to wick
Typical Use: Chain-driven equipment. directly into the rust by capillary action.
Item Container Size Pack Typical Use: Removing rusty nuts, bolts
51360 5.3 oz. tube 12 and assemblies.
Item Container Size Pack
Loctite® Solvo-Rust® Super 996456 13.52 oz. net wt. 12
Penetrating Oil aerosol
Frees rusted parts and keeps them
lubricated and protected from rust after Loctite® Moly Dry
use. May be applied on or near moving Film Lubricant
parts. Will not harm painted surfaces. Solid film lubricant for sliding surfaces and
Contains no ozone-depleting compounds. slow moving parts. Temperature resistant
CFIA approved. up to 750°F (400°C) as a dry film lubricant,
2400°F (1315°C) as an anti-seize. Won’t
Typical Use: Break the bond of oxidized
metal and release rusted or squeeze out, burn off, or pick up dirt.
frozen parts. Typical Use: Heavy-duty lubricant for plant
Item Container Size Pack and machine maintenance.
81252 (Cat # 222-3115) 12.25 oz. aerosol 12 Item Container Size Pack
can 39895 (Cat # 242-6990) 12 oz. aerosol 12
can
Loctite® Penetrating Oil
Heavy-duty penetrant for rusted and Loctite® Gear, Chain and
frozen assemblies. Works quickly to Cable Lubricant
penetrate and loosen rust, tar, grease, dirt, Protects and prolongs the life of gears,
carbon deposits and corrosion from metal chains, wire rope, and cable. Repels dirt,
parts. Frees frozen nuts, bolts and fittings sand, and dust with minimal “throw-off ”
in all types of assemblies. from centrifugal force. Contains no ozone-
Typical Use: Lubricates to free any depleting compounds.
corroded or seized part. Typical Use: Lubricant for any chain-driven
Penetrates rust, scale, paint, tool or vehicle.
varnish, carbon or gum. Item Container Size Pack
Item Container Size Pack 81251 (Cat # 222-3110) 12 oz. aerosol 12
51221 (Cat # 222-3123) 12 oz. aerosol 12 can
can
Nickel 2400°F
77164 1 lb. brush-top can 0.13 Silver General Purpose ABS
Anti-Seize (1315°C)
Loctite® NonFlammable
Electrical Contact Cleaner
Removes grease, oil and other
contaminates from electrical parts to
prevent contact failure. Dries residue-
free in seconds. Contains no HCFCs
or CFCs.
Typical Use: Cleans motorized
instruments.
Item Container Size Pack
1174633 15 oz. net wt. 12
(Cat # 222-3124) aerosol
mc-free chisel®
gasket cleaner
Free of Methylene Chloride has a foaming
action that lifts off gaskets from any type
of assembly in minutes. Performs better
than Methylene Chloride formulations
on silicone gaskets and removes most
spray paints from steel panels in less
than 30 seconds. Convenient spray
liquid penetrates and cleans intricate
shapes and will not run off, even on
vertical surfaces.
Typical Use: Removes pre-cut
conventional gasket cements
as well as formed-in-place
chemical gaskets. Suitable
for wood and plaster. Not for
use on plastics, linoleum or
synthetic fibers.
Item Container Size Pack
1317781 15.25 oz. net wt. 12
aerosol
19
Loctite® Non-Chlorinated Loctite® Maxi-Coat™
Parts Cleaner Rust Inhibitor
Penetrates, dissolves, and removes Heavy-duty coating provides long-term
dirt and oil from metal parts. Leaves protection for metal parts, equipment and
no residue. Does not contain machinery. Forms a protective, waxy film
1,1,1-trichlorethane; helps manage that seals out moisture, air, acid and other
EPA halide limits. corrosive elements. Great for protecting
Typical Use: Removes dirt and oil from parts in storage. Removable with Loctite®
metal parts; helps manage Electrical Contact Cleaner.
EPA halide limits. Typical Use: Non-splattering chain lube,
Item Container Size Pack acting as a rust inhibitor for
30545 14.75 oz. aerosol 12 machinery.
(Cat # 222-3117 & 222-3118) can Item Container Size Pack
51211 (Cat # 222-3121) 12 oz. aerosol 12
Loctite® chisel® can
gasket remover
Removes gaskets from any type of Loctite® Extend®
assembly in 10 to 15 minutes. Prepares Rust Treatment
metal parts for new gaskets, eliminating Converts existing rust (rust required) into a
scraping and sanding. Not for use on stable base. Cured product acts as a primer
plastics, linoleum or synthetic fibers. ready for painting with oil- or solvent-based
CFIA approved. paint. Protects surface from corrosion.
Typical Use: Removes pre-cut Typical Use: Metal pipes, Valves, Fittings,
conventional gasket cements Outside surfaces of storage
as well as formed-in-place tanks, Fences, Guardrails,
chemical gaskets. Suitable Wrought iron furniture,
for wood and plaster. Not for Conveyors, and Construction
use on plastics, linoleum or and agricultural equipment.
synthetic fibers. Tech Item Container Size Pack
Item Container Size Pack 30539 10.25 net wt. 12
see page 39
79040 18 oz. net wt. 10 aerosol
aerosol 75430 1 quart bottle 10
75448 1 gallon bottle 4
75465 5 gallon pail 1
Loctite® Fixmaster®
Superior Metal
Non-rusting, ferro-silicone-filled epoxy.
Extremely high compressive strength and
wear resistance. Ideal for rebuilding worn
surfaces exposed to harsh environments.
Can be machined, drilled and tapped
in 6 to 8 hours. For final finish cuts, let
the product cure for 24 hours and use
carbide tooling. Spreadable putty. Sets in
20 minutes.
Typical Use: Rebuilding, Corrosion
protection, Repairing theaded
parts, Pump repair.
Item Container Size Pack
97473 (Cat # 1U-6136) 1 lb. kit 6
21
Loctite® Fixmaster® Loctite® Black
Flex 80™ Putty Contact Adhesive
A trowelable, two-part urethane for A professional, solvent-based adhesive with
rebuilding and repairing rubber parts and neoprene that blends in with black-colored
linings, providing impact-, abrasion-, and fabrics, rubbers, weather-stripping and other
corrosion-resistant protection. porous materials. Withstands temperature
Typical Use: Belt repair, Rebuilding extremes and is resistant to gasoline, kerosene
and repairing rubber parts and other solvents. Fast drying and waterproof.
and linings. Allows repositioning of the parts after
Item Container Size Pack initial contact.
97423 (Cat # 144-7779) 1 lb. kit 6 Typical Use: Weather-stripping, Vinyl, Rubber,
Wood and Metal.
Loctite® Fixmaster® Wear Item Container Size Pack
Resistant Putty 30540 (Cat # 5H-2471) 5 fl. oz. tube 12
Ceramic fibers give this trowelable putty
excellent wear- and abrasion-resistant Loctite® Maximum Strength
properties. Cures to a smooth, low friction Headliner Adhesive
surface. For surfaces exposed to wear, A high strength, aerosol product designed for
erosion and cavitation. bonding foam, carpet, fabrics, plastics, rubber,
Typical Use: Gap filling. Wear-resistant etc. Loctite® Maximum Strength Headliner
formulation. Adhesive is resistant to extreme seasonal
Item Container Size Pack temperatures, is water resistant and sprays
on clear.
98743 (Cat # 1U-6132) 3 lb. kit 6
Typical Use: Foam, Carpet, Fabrics, Plastics
Loctite® Fixmaster® and Rubber.
Fast Set Steel Putty Item Container Size Pack
Faster setting version of Loctite® Fixmaster® 37312 16.75 oz. net wt 6
Steel Putty. Sets in 3 minutes. aerosol
Typical Use: Repairing pipes and tanks.
Loctite® 330™ Depend® Adhesive
Item Container Size Pack
Loctite® 330™ Depend® Adhesive sets in just
39917 (Cat # 1U-6140) 1 lb. kit 6
minutes to a tough acrylic adhesive with high
Loctite® Fixmaster® peel and impact strength. No-mix kits include
Magna-Crete™ activator and adhesive. Store at 36°F to 46°F.
A two-component, rapid-setting concrete Typical Use: Bonding almost all combinations of
repair and grouting system. Chemically materials, including glass.
resistant to most common liquids and Item Container Size Pack
chemicals, and can be mixed and applied 20251 (Cat # 308-3506) 25 ml kit 5
at temperatures from -15°F to 130°F (-26°C 20252 250 ml kit 5
to 54°C). Ready for service in one hour.
Summer and Winter Additives are also Loctite® 332™
available to aid cure times. Structural Adhesive
Typical Use: General floor repair. An activator-cured, no-mix adhesive that
Item Container Size Pack provides high temperature capability with
thermal durability up to 400°F (204 C). Use with
95551 1 gallon kit 1
Loctite® 7387™ Depend® Activator. Store at 36°F
95555 5 gallon kit 1
to 46°F.
Loctite® Contact Adhesive Typical Use: High temperature, no-mix
A fast drying, solvent-based adhesive with structural adhesive.
neoprene that bonds rubber, insulation, Item Container Size Pack
weather stripping and other porous 33201 25 ml syringe 10
materials. Sets to a tackfree surface
in 3-4 minutes, and the early strength
is enough to hold most parts together.
Allows repositioning of the parts after
initial contact.
Typical Use: Yellow gel for bonding
rubber, insulation and
weather stripping.
Item Container Size Pack
30537 5 fl. oz. tube -
Yellow 1
solutions guide for cat dealers 22
Bonding & Repair Loctite® H3000™ Speedbonder™
Structural Adhesive
Assembling Separate Parts A low viscosity adhesive ideal for bonding
a variety of substrates. Keep at 40°F for
longer shelf life.
Typical Use: Steel, Aluminum,
Stainless steel.
Item Container Size Pack
83001 (Cat # 209-0987) 50 ml dual 10
cartridge
Also required for 50 ml Speedbonder™:
98473 Loctite® Luer/Stepped
Nozzles
98466 Loctite® Caulking Gun
Conversion Kit
23
Loctite® 410™ Prism® Tough Loctite® 480™ Prism®
A black toughened instant adhesive with gap Instant Adhesive
filling capabilities. Low viscosity, elastomer-modified instant
Typical Use: Gap filling. Bonding rubbers, adhesive. Bonds metals and rubbers. Excellent
metals and plastics. peel, impact and shear strength. NSF®/ANSI 61
Item Container Size Pack certified for potable water.
41045 20 g bottle 10 Typical Use: General filling.
Item Container Size Pack
48040 20 g bottle 1
Loctite® 411™ Prism®
Instant Adhesive
An adhesive formulated for excellent impact Loctite® 3034™
and peel strength in gap-filling applications. Structural Adhesive
Typical Use: Clear gap filling. Extended open time allows for adjustment of
Item Container Size Pack parts. Excellent peel and shear strength on
polyethylene plastics.
41104 3 g tube 10
Typical Use: Porous surfaces.
Item Container Size Pack
Loctite® 414™ Super Bonder® 1051330 50 ml cartridge 1
Loctite 414™ Super Bonder® is a general 960973 490 ml dual 1
purpose instant adhesive that works well for cartridge
bonding plastic, rubber and metal.
Typical Use: Plastic bonder.
Item Container Size Pack
Loctite® 454™ Prism®
41404 (Cat # 157-7228) 3 g tube 10
Instant Adhesive
The ideal adhesive for porous substrates,
Loctite® 454™ Prism® Instant Adhesive is a clear
Loctite® 426™ Prism® gel. As a surface insensitive cyanoacrylate, it is
Instant Adhesive ideal for difficult-to-bond substrates, including
Designed for porous surfaces and vertical rough, porous and acidic surfaces. Need to
or overhead applications with the added bond something on a vertical surface? This
benefits provided by an elastomer-modified gel formulation won’t run off before you put
instant adhesive. substrates together. ABS Approved.
Typical Use: Porous surfaces, Typical Use: Porous surfaces.
Vertical, Overhead. Item Container Size Pack
Item Container Size Pack 45404 3 g tube 10
21921 10 g syringe 10
25
Loctite® Item Package Size Temperature
Color Fixture Time* Full Cure* Agency Approvals
PRODUCT Number & Type Resistance
20253 3 ml kit 1**
-65°F to 225°F
330™ Depend® 20251 25 ml kit 2** Pale Yellow 5 min. 24 hrs. CFIA
(-54°C to 107°C)
20252 250 ml kit 3**
Up to 400°F
332™ 33201 25 ml syringe Amber 3 min. 24 hrs. N/A
(204°C)
380™ Black Max® -65°F to 225°F
38004 3 g tube Black 90 sec. 24 hrs. CFIA
Instant Adhesive (-54°C to 107°C)
-65°F to 180°F
401™ Prism® 40104 3 g tube Clear 15 sec. 24 hrs. CFIA
(-54ºC to 82ºC)
-65°F to 180°F Commercial item std.
406™ Prism® 40604 3 g tube Clear 15 sec. 24 hrs.
(-54°C to 82°C) A-A-3097
-65°F to 210°F
411™ Prism® 41104 3 g tube Clear 30 sec. 24 hrs. N/A
(-54°C to 99°C)
-65°F to 180°F CFIA, Commercial item
414™ Super Bonder® 41404 3 g tube Clear 20 sec. 24 hrs.
(-54°C to 82°C) std. A-A-3097
-65°F to 210°F
426™ Prism® 21921 10 g syringe Black 20 sec. 24 hrs. N/A
(-54°C to 99°C)
-65°F to 180°F
454™ Prism® 45404 3 g tube Clear 15 to 90 sec. 24 hrs. ABS, CFIA
(54°C to 82°C)
-65°F to 180°F
480™ Prism® 48040 20 g bottle Black 90 sec. 24 hrs. NSF® / ANSI 61
(54°C to 82°C)
-65°F to 180°F Commercial item std.
495™ Super Bonder® 49550 1 oz. bottle Clear 20 sec. 24 hrs.
(-54°C to 82°C) A-A-3097, ABS
-65°F to 180°F Commercial item std.
496™ Super Bonder® 49650 1 oz. bottle Clear 30 sec. 24 hrs.
(-54°C to 82°C) A-A-3097
-65°F to 180°F
498™ Superbonder® 49850 1 oz. bottle Clear 50 sec. 24 hrs. N/A
(-54°C to 82°C)
3034™ 1051330 50 ml cartridge Up to 350°F
Translucent 75 min. 72 hrs. N/A
Structural Adhesive 960973 490 ml dual cartridge (177°C)
24 hrs. at
All Purpose Clear Drying, Semi- Up to 120°F
30544 10.5 oz. net wt. aerosol 15 to 20 min. ambient N/A
Spray Adhesive translucent Foam (49ºC)
temperature
24 hrs. at
Up to 180°F Let breath 2 to 3 min.;
Black Contact Adhesive 30540 5 fl. oz. tube Black Gel ambient CFIA
(82°C) sets up in 5 to 15 min.
temperature
24 hrs. at
Up to 180°F Let breath 2 to 3 min.;
Contact Adhesive 30537 5 fl. oz. tube Yellow Gel ambient CFIA
(82ºC) sets up in 5 to 15 min.
temperature
21425 10 – 0.12 fl. oz. cups
Fixmaster® Fast Cure Epoxy Grey Up to 180°F
21426 10 – 1 oz. cups 10 min. 12 hrs. CFIA
(Mixer Cups)† (upon curing) (82°C)
39088 4 – 1 oz. cups
H3000™ Speedbonder™ 83001 50 ml dual cartridge Cream N/A 15 min. 24 hrs. N/A
Adhesive and 0.7 fl. oz. ampule of Loctite® 7387™ Depend® Activator. 2 Contains 25 ml syringe of Loctite® 330™ Depend® Adhesive and 25 g aerosol can of Loctite® 7387™ Depend®
Activator. 3 Contains 250 ml tube of Loctite® 330™ Depend® Adhesive and 4.5 fl. oz. aerosol can of Loctite® 7387™ Depend® Activator.
Fixmaster®
Flex 80™ 97423 1 lb. kit Black 277 in.3 180 N/A N/A 87 10 min. 8 min. 100:40 72:28 ABS
Putty*
Fixmaster®
4 oz.
Metal Magic 98853 Grey 7 in.2 250 12,000 2,500 80 3 min. 10 min. N/A N/A NSF 61
stick
Steel™*
Fixmaster®
97473 1 lb. kit Dark 0.25
Superior 250 18,000 5,500 90 20 min. 6 hrs. 4:1 7.25:1 CFIA
40900 4 kg kit Grey 2.2
Metal*
Fixmaster®
1 hr. fixture, ABS, CFIA,
Wear
98743 3 lb. kit Grey 1.11 225 11,600 4,900 89 30 min. 6 hrs. 2:1 2:1 NEHC,
Resistant
full cure NAVSEA
Putty*
* Properties are based on mixing 1 lb. (453.6 g) mass at 77˚F (25°C), 7 days cure. † Ultimate cure. Epoxy properties based on mixing 20 g (.7 oz.) mass at 77°F (25°C).
see page 40
Loctite® Form-A-Thread®
Stripped Thread Repair Kit
Permanently repairs stripped threads and
fasteners in five minutes (up to SAE Grade 5
English and 8.8 metric). Allows up to 1,538 in.
lbs. torque (on 1" bolt) and 300˚F (149˚C)
Resists most shop fluids.
Typical Use: Repairing stripped threads.
Item Container Size Pack
28654 12.9 ml kit 1
27
Loctite® ¼" Stainless Steel Tips Loctite® 50 ML DUAL CARTRIDGE
Helical Thread MANUAL APPLICATORS
High presision dispense needle, 18 guage, stainless Hand held dual cartridge dispenser for 50 ml
steel with vertical thread for secure valve and dual cartridges.
syringe barrel attachment. Typical Use: General purpose.
Typical Use: Dispensing needle. Item Container Size Pack
Item Container Size Pack 1034026 1 applicator 1
98196 50 tips 1
31
Threadlocking Applications Bonding Applications
Q: How can I prevent “rusting in” between linkage pins Q: On what bonding applications can I use the Loctite®
and cartridge pins and the mating bores? Fixmaster® Fast Cure Epoxy?
A: Use Loctite® 242® or QuickStix® 248™ Threadlocker A: Use for bonding broken parts, patching holes and
to coat the pin and bore prior to assembly for a rust- resurfacing corroded areas (can be sanded or painted
free barrier. Applying Loctite® 242® or QuickStix® 248™ after cure). Bonds metal, glass, wood, concrete
Threadlocker eliminates the need for burning out pins and some plastics. Bonds identification, name and
on loader linkage arms, excavator sticks, and booms or information plates. Fills large gaps.
similar assemblies.
Q: How do I use Loctite® 330™ Depend® Adhesive?
Q: Are there any performance differences between A: Unlike epoxies, Loctite® 330™ Depend® Adhesive does
the new Loctite® brand Thread Treatment Sticks not require mixing, measuring or heating. Make sure all
(Loctite® 248™ and Loctite® 268™) and the traditional
parts are cleaned and dry. Spray activator, then apply
Loctite® brand Threadlocker liquids (Loctite® 242®
adhesive to parts that are to be assembled. Please see
and Loctite® 271™)?
the kit box for complete directions. Handling strength
A: No. Both of the new Loctite® brand Thread Treatment
in two minutes. Cures to tough powerful bond. Works
Sticks were designed to maintain the exact
on all metals, wood, cork, ceramic, glass and most
performance characteristics of the liquid alternatives.
plastics. May eliminate drilling, tapping, riveting or
Q: Is a primer, like Loctite® 7649™ Primer N™, necessary welding. Easy syringe application. Oil resistant. Heat
when using threadlockers? resistant to 250°F (121°C).
A: If the parts are contaminated with dirt and grease, they
Q: What are some key applications for Loctite® 330™
should be cleaned with a primer in order to ensure
Depend® Adhesive?
optimal performance. Other alternatives are to utilize
new threadlocking technology such as Loctite® 243™ A: Use to bond name plates and serial plates on
Threadlocker – Oil Resistant. When the metals are equipment. Bonds control knobs that loosen under
inactive, a primer should be used. vibration. Bonds dissimilar materials such as metal,
wood, plastic and concrete. Bonds porous surfaces.
Q: Which Loctite® Threadlocker product is best suited
Bonds glass to steel. Use to bond rear view mirror
for a high shock or vibration application?
brackets to windshields.
A: Loctite® 271™ Threadlocker – High Strength is best
suited for heavy equipment applications where shock Q: How do Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups
or vibration are common, such as suspension bolts, differ from the other Loctite® brand adhesive products
motor, and pump mounts. previously described?
Q: How do I disassemble parts? What is the procedure? A: Loctite® Fixmaster® Fast Cure Epoxy, Mixer Cups have
two parts which must be mixed together. When mixed,
A: Use standard hand tools for disassembly of low and
medium strength threadlockers. For high strength the epoxy will cure in air. Comes in a convenient mixer
threadlockers, apply localized heat to nut or stud for cup for mixing. No mess. No guess. No waste.
5 minutes at 450°F (232°C). Disassemble while hot. Retaining Applications
Q: What about preassembled fasteners? Is there a Q: Can I use Loctite® 609™ Retaining Compound to fill
Loctite® brand Threadlocker I can use to post-apply to the clearance between a bearing and worn housing
the assembly? or shaft?
A: Yes. Loctite® 290™ Threadlocker – Medium Strength is A: Yes. It will fill a clearance up to 0.005" (0.13 mm).
a wicking grade. This means that the Threadlocker can
Holding power is equal to a press fit.
be applied to preassembled fasteners and the liquid
will seep into the assembly to strengthen the fastener. Q: How do I use Loctite® 609™ Retaining Compound to
mount bearings?
A: 1. Spray parts with Loctite® 7649™ Primer N™.
Let dry 2 or 3 minutes.
2. Apply Loctite® 609™ Retaining Compound.
3. Assemble in normal way.
4. Cure 2 hours at room temperature.
Q: How do I install parts with Loctite® 620™ Retaining
Compound, High Strength?
A: 1. Spray parts with Loctite® 7649™ Primer N™.
Let dry 2 or 3 minutes.
2. S pread parts with Loctite® 620™ Retaining Compound
– Slip Fit.
3. Install gear.
4. P ress fits can be used at once. On slip fits,
allow 2 hours.
solutions guide for cat dealers 32
ENGINE
APPLICATIONS
33
Diesel Injectors
Glow plugs • Loctite® 242®
• Loctite® QuickStix® C5-A® Threadlocker
Copper Anti-Seize Lubricant
Water Pump Mounting
Hardware Pulley Bolts
• Loctite® 242® Threadlocker
• Loctite® QuickStix®
248™ Threadlocker
Harmonic
Oil Pan Cover Balance Bolts
• Loctite® High Flex • Loctite® 271™
Form-In-Place Gasket Threadlocker
Tech
Loctite® 290™
Weld Bead
Tank Wall
Weld Porosity
243™ Bead
35
THREAD SEALING THREAD SEALING
STANDARD FITTINGS – PIPES, HYDRAULIC, OR AIR COMPRESSION FITTINGS
PST® Band PST® Band PST® Coating PST® Band PST® Band
1. Clean parts of contamination. If necessary, spray Loctite® 7649™ 1. Slide fitting nut and ferrule back approximately ¾" from end of tubing.
Primer N™ onto threaded parts (male and female). Allow to dry. 2. If necessary, spray the entire assembly with Loctite® 7649™ Primer N™.
Note: Primer is not required for brass parts. Allow to dry.
2. Apply a band of Loctite® PST® Thread Sealant to male threads starting Note: Primer is not required for brass parts.
one to two threads from end of pipe. 3. Apply a thin coating of Loctite® PST® Thread Sealant to tubing where
3. Assemble parts snugly. Do not overtighten. ferrule will be located.
4. If initial pressure exceeds 1000 psi*, wait 30 minutes before pressurizing. 4. Slide ferrule forward over Loctite® PST® Thread Sealant coated
Note: • For stainless steel components, use Loctite QuickStix 561
® ® ™ tubing, then apply a thin bead of Loctite® PST® Thread Sealant
PST® Pipe Sealant. coating to ferrule.
• For general purpose thread sealing, use Loctite® QuickStix® 5. Slide ferrule forward over Loctite® PST® Thread Sealant coated tubing.
561™ PST® Pipe Sealant. 6. Apply a small band of Loctite® PST® Thread Sealant to male threads.
• For fine filtration systems requiring zero contamination, use 7. Assemble and tighten normally.
Loctite® 545™ Thread Sealant for hydraulic/pneumatic fittings. Note: Do not use on plastic fittings or tubing.
• Do not use with systems containing oxygen or strong
oxidizers (chlorine). FLARED/SWAGED FITTINGS
* Depending on conditions
PST® Coating (for new or damaged flare or seat)
PIPE UNIONS
PST® Band PST® Band PST® Band
PST® Band
PST® Coating (may be used for new or damaged seat)
1. Disassemble and, if necessary, spray all components with Loctite® 7649™
1. Disassemble and, if necessary, spray all components with Loctite® 7649™ Primer N™. Allow to dry.
Primer N™. Allow to dry.
2. Apply a thin coating of Loctite® PST® Thread Sealant to fitting face.
2. Apply a thin coating of Loctite® PST® Thread Sealant to union face.
3. Apply a band of Loctite® PST® Thread Sealant to male threads.
3. Apply a band of Loctite® PST® Thread Sealant to male threads.
4. Assemble parts snugly.
4. Assemble parts snugly.
Tech
1. If necessary, spray adapter threads with Loctite® 7649™ Primer N™.
Allow to dry. 609™
Housing
2. Insert barbed hose stem into hose I.D. with slight twisting motion.
3. Install appropriate hose clamp. ORIGINAL
4. Apply a band of Loctite® PST® Thread Sealant to male hose stem 1. Select component to fit shaft.
threads upon installation or adding accessory device. Tighten snugly. 2. Machine to reduce component O.D. or increase housing I.D. to permit
Note: Loctite® PST® Thread Sealant may attack synthetic rubber tubing. approximate 0.002"-0.004" diametral slip fit.
3. Clean all parts and spray with Loctite® 7649™ Primer N™.
4. Apply Loctite® 609™ Retaining Compound to component O.D.
5. Install component. Do not rotate.
TANDEM MOUNT
1. Apply retaining compound to bore of inside component.
2. Continue assembly as above.
37
STRENGTHEN KEYED ASSEMBLIES FORM-IN-PLACE SILICONES
STANDARD DUTY STAMPED OR SHEET METAL FLANGES
FIT Dab 660™ Quick Metal® or 243™ here
1. Tap component and key with hammer. 1. Remove old gasketing material and other heavy contaminants with
2. Pull as usual. Loctite® Chisel® Gasket Remover. Use mechanical removal technique
if required.
Note: Avoid grinding.
2. Clean both flanges with parts cleaner.
3. Spray Loctite® 7649™ Primer N™ on both flange faces and both sides of
the precut gasket. Allow 1-2 minutes to dry.
4. Smear Loctite® Gasket Eliminator® Flange Sealant to both sides of
precut gasket with a clean applicator.
5. Place coated gasket on flange surface and assemble parts immediately.
Note: • If cover bolts into blind holes (as above), apply Loctite® 243™
Threadlocker into hole and on threads. Tighten normally.
• If it is a thru hole bolt assembly, apply Loctite® 243™ or
QuickStix® 248™ Threadlocker to bolt threads.
6. Tighten normally.
Tech
-65°F to 300°F
General 515™ Gasket Eliminator® 0.050"
(-54°C to 150°C)
39
HOUSED COMPONENTS THREAD REPAIR
COMPONENT CENTERING STRIPPED THREAD REPAIR
Cleaned Bolt
Release Agent
Shims Threadlocker Cover
Plate
Stripped Release
Threads Agent
Shim FORM-A-
FORM-A-
THREAD® THREAD®
½ Fill Only
Tape Tape New
Threads
EXCESSIVE/EVEN WEAR
1. Position the component in bore. Step 1 Step 2 Step 3
Tech
BONDING BONDING
INTRODUCTION TO BONDING ADHESIVES SURFACE PREPARATION
Within the broad range of Loctite brand adhesives you will always
®
Abrasive Methods
find the solution to your bonding challenge. It is, however, extremely
Rubbing or striking a surface with hard, coarse material.
important to have at least basic knowledge of adhesive methodology in
Abrasive examples:
order to successfully bond two substrates together. The three major
causes of bonding failures are attributed to: • S
anding: Rubbing with abrasive paper or cloth (for small area/superficial
wear-down)
• Poor evaluation of the bonding assembly
• B
lasting: Striking with steel grit, sand, or other abrasive material (for
• Inadequate substrate preparation
large areas/deep wear-down)
• Improper adhesive selection
Chemical Methods
Cleaning process that uses solvents to dissolve contaminants.
BONDING ASSEMBLY Chemical examples:
Bonding assembly has a direct impact in the adhesive performance. Choose
• Solvent Dip: Immersing in solvent
a combination of types of joints or joint stress distribution that maximizes
bonding strength. Below are different types of joints and stress distribution: • Solvent Wipe: Rubbing with solvent-soaked wipe
• Vapor Degreasing: Solvent in vapor form
TYPES OF JOINTS
• U
ltrasonic Cleaning: Solvent dip method with high-frequency sound
waves that vibrate the dirt away
41
TROUBLESHOOTING LIMITATION OF WARRANTY
CHECKLIST The data contained herein are furnished for information only and are
believed to be reliable. We cannot assume responsibility for the results
1. What type of failure is occurring? Has the application worked before?
obtained by others over whose methods we have no control. It is the user’s
2. Was proper and adequate adhesive/sealant used? responsibility to determine suitability for the user’s purpose of any
3. Was proper and adequate primer/activator used? production methods mentioned herein and to adopt such precautions as
may be advisable for the protection of property and of persons against any
4. Do service conditions exceed the capability of the adhesive sealant? hazards that may be involved in the handling and use thereof.
(a) operating temperature (c) fluid compatibility
(b) excessive pressure too soon (d) impact on environment In light of the foregoing, HENKEL CORPORATION SPECIFICALLY DISCLAIMS
ALL WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
5. Were parts adequately cleaned prior to applying adhesive? PURPOSE ARISING FROM SALE OR USE OF HENKEL CORPORATION’S
Note: If adhesive failure, is cured residue on one or both parts? PRODUCTS. HENKEL CORPORATION SPECIFICALLY DISCLAIMS ANY
If one part is bare, check that part for contamination. LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES OF ANY KIND,
INCLUDING LOST PROFITS. The discussion herein of various processes
6. Were proper assembly techniques utilized?
or compositions is not to be interpreted as representation that they are
7. Was adhesive/sealant allowed adequate cure time prior to service? free from domination of patents owned by others or as a license under
any Henkel Corporation patents which may cover such processes or
8. Do assembly/part conditions exceed capability of the adhesive/sealant?
compositions. We recommend that each prospective user test the proposed
(a) excessive gaps (c) improper joint design
application to determine its suitability for the purposes intended prior to
(b) component materials (d) inadequate clamping/fixturing
incorporating any product or application in its manufacturing process using
9. If additional assistance is required, please call our HENKEL TECHNICAL this data as a guide. Some products may be covered by one or more United
INFORMATION LINE. See back cover for the Henkel Technical States or foreign patents or patent applications.
Information number in your area.
Note: Reference Materials
(a) Product Selector Slide Rule (LT-776)
(b) Loctite® Fluid Compatibility Chart (LT-836)
43
loctite® Product description Index
Product description page No.
45
Caterpillar Product Number Index
OLD Cat Loctite®
Product description page No.
Part No. Item No.
119-0781 59575 Loctite Superflex 595 Rtv Silicone Adhesive – Clear
® ® ™
14
138-8436 1540591 Loctite® Hi-Tack Gasket Sealant (Fomerly 30525) 13, 14
141-5830 40464 Loctite® Superflex® Rtv Silicone Adhesive Sealant – Black 14
141-5831 40462 Loctite® 587™ Blue, High Performance Rtv Silicone Gasket Maker 11, 14
144-7779 97423 Loctite® Fixmaster® Flex 80™ Putty 22, 26
152-9155 38004 Loctite® 380™ Black Max® Instant Adhesive 25, 26
154-9731 27121 Loctite® 271™ Threadlocker – High Strength 4, 6
155-0695 27131 Loctite® 271™ Threadlocker – High Strength 4, 6
157-7228 41404 Loctite® 414™ Super Bonder® 24, 26
165-2601 20166 Loctite® 5900® Flange Sealant 12, 14
169-5464 21348 Loctite® 7649™ Primer N™ 5, 6, 8, 10
1U-6132 98743 Loctite® Fixmaster® Wear Resistant Putty 22, 26
1U-6136 97473 Loctite® Fixmaster® Superior Metal 21, 26
1U-6140 39917 Loctite® Fixmaster® Fast Set Steel Putty 22, 26
1U-8846 38657 Loctite® High Flex Form-In-Place Gasket 13
209-0987 83001 Loctite® H3000™ Speedbonder™ 23, 26
222-3110 81251 Loctite® Gear, Chain and Cable Lubricant 16
222-3113 30544 Loctite® Spray Adhesive 23, 26
222-3114 51003 Loctite® C5-a® Copper Anti-Seize Lubricant 17, 18
222-3115 81252 Loctite® Solvo-Rust® Super Penetrating Oil 16
222-3117 & 222-3118 30545 Loctite® Non-Chlorinated Parts Cleaner 20
222-3121 51211 Loctite® Maxi-Coat™ Rust Inhibitor 20
222-3123 51221 Loctite® Penetrating Oil 16
222-3124 1174633 Loctite® Nonflammable Electrical Contact Cleaner 19
226-6624 39473 Loctite® Clover® Silicon Carbide Grease Mix – 80 Grit 19
242-6990 39895 Loctite® Moly Dry Film Lubricant 16
266-3144 21427 Loctite® Fixmaster® General Purpose Epoxy Mixer Cups 21
269-1943 66040 Loctite® 660™ Quick Metal® Retaining Compound – Press Fit 10
308-3506 20251 Loctite® 330™ Depend® Adhesive 22, 26
337-7965 77164 Loctite® Nickel Anti Seize Lubricant 18
3S-6252 59330 Loctite® Superflex® 593™ Rtv Silicone Sealer – Black 14
4C-4030 24221 Loctite® 242® Threadlocker – Med Strength 3, 6
4C-4032 60921 Loctite® 609™ Retaining Compound – Press Fit/General Purpose 9, 10
4C-5300 17430 Loctite® 5127™ Flexible Anaerobic Gasket Flange Sealant 12, 14
4C-5592 & 4C5593 51084 Loctite® Graphite-50™ Anti-Seize Lubricant 18
4C-5598 51144 Loctite® C5-a® Copper Anti-Seize Lubricant 17, 18
4C-5599 51147 Loctite® C5-a® Copper Anti-Seize Lubricant 17, 18
4C-9501 30511 Loctite® Gasket Sealant 1 12, 14
4C-9502 30514 Loctite® Gasket Sealant 2 12, 14
4C-9505 30517 Loctite® Aviation Gasket Sealant 13, 14
4C-9506 62015 Loctite® 620™ Retaining Compound – Slip Fit/High Temp. 9, 10
4C-9507 62040 Loctite® 620™ Retaining Compound – Slip Fit/High Temp. 9, 10
4C-9509 29031 Loctite® 290™ Threadlocker – High Strength Wicking Grade 5, 6
4C-9612 59830 Loctite® 598™ Black, High Performance Rtv Silicone Gasket Maker 12, 14
4C-9614 59630 Loctite® Superflex® Red High Temp RTV Silicone Adhesive Sealant 13, 14
5H-2471 30540 Loctite® Black Contact Adhesive 22, 26
5P-3413 38363 Loctite® 536™ Low Breakloose Pst® Pipe Sealant 7, 8
5P-3931 51008 Loctite® C5-a® Copper Anti-Seize Lubricant 17, 18
6V-4876 51084 Loctite® Graphite 50™ Anti-Seize 18
6V-6640 38364 Loctite® Hi-Temp Flange Sealant 12, 14
7M-7456 60931 Loctite® 609™ Retaining Compound – Press Fit/General Purpose 9, 10
8T-0065 59430 Loctite® Superflex® 594™ RTV Silicone – White 14
8T-9013 59675 Loctite® Superflex® Red High Temp RTV Silicone Adhesive Sealant 13, 14
8T-9014 51388 Loctite® Superflex® Rtv Silicone Adhesive, Non Corrosive – Clear 14
8T-9018 & 8T-9019 98853 Loctite® Fixmaster® Metal Magic Steel™ 21, 26
8T-9022 30533 Loctite® Superflex® Rtv Silicone Adhesive Sealant – Blue 14
9S-3263 24231 Loctite® 242® Threadlocker – Med Strength 3, 6
Cover photos and interior photos of heavy equipment courtesy of Caterpillar, Inc.
Except as otherwise noted, all marks used in LT-3820 are trademarks and/or registered trademarks of Henkel and/or its affiliates in the U.S. and elsewhere. ® = registered in the U.S.
Patent and Trademark Office. Cat and Caterpillar are registered trademarks of Caterpillar Inc. Inconel and Monel are trademarks of Huntington Alloys Corporation. Kovar is a trademark of
CRS Holdings, Inc. Magna-Crete is a trademark of Kelly Restoration. UL is a trademark of Underwriters Laboratories Inc. ULC is a trademark of Underwriters Laboratories of Canada. NSF
is a trademark of NSF International. CSA is a trademark of CSA International. © Henkel Corporation, 2011. All rights reserved. 7439/LT-3820 (12/11)