Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Description
The Models “GPR-6” and “GPR-24” Shear-Out
Safety Joint are upstrain-type releasing tools with a
heavy-duty rotational lock mechanism that allows high
torque ratings to be transmitted to the lower gravel pack
screen assembly. They are designed for use between
the gravel pack extension and the sand screen to pro-
vide a means of releasing and retrieving the packer and
gravel pack extension. They can also be used in any ap-
plication where an upstrain-type releasing tool is re-
quired. The “GPR-6” provides 6 inches of seal surface
after the tool is sheared; the “GPR-24” provides 24 inch-
es.
Features / Benefits
• Non-welded key/lug design allows for high torque
ratings, ideally suited for horizontal or highly
deviated wells
• The torque rating in ft-lbs is approximately equal to
the OD in inches x 1,000 ft-lbs/in. (eg, the 3-3/4 inch
tool has a rating of 3,500 ft-lbs)
Ordering Instructions
Specify the Product Family Number, model, size,
threads, and shear value desired. In determining the de-
sired shear-out force, the weight of the pipe and equip-
ment suspended below the tool should be considered.
Shear Values
Shear Value (lbs)
Shear Screws Required X
(±20%)
28,920O 6
44,800 5
53,760 6
62,720 7
71,680 8
80,640 9
XTools are assembled with all shear screws. Remove screws as required
to obtain the desired shear value.
6 shear screws maximum for size 2-3/8.
8 shear screws maximum for size 2-7/8.
OSize 1.900 with 3/8" shear screws.
Drawing No. 662-093
This document is and contains unpublished, copyrighted and confidential information of Baker Hughes, and is revealed for limited purposes only. This document
is the property of Baker Hughes and is to be returned to Baker Hughes on request and may not be reproduced, used or disclosed to persons not having a need to
know consistent with the purpose of the document, without the written consent of Baker Hughes. This document is not rented, loaned or sold, either alone or in
conjunction with equipment or product. © 6/26/01 Baker Hughes Incorporated.
Rev. New
Unit No. 5597
WARNING
Use of Baker equipment contrary to
manufacturer’s specification may result in
property damage, serious injury or fatality.
Page 2 of 4
Assembly And Dimensional Data Drawing No. 662-093
10-1-03
Model s “GPR-6” And “GPR-24” Shear-Out Safety
Joint
Model “GPR-6” Shear-Out Safety Joint
Joint
Model s “GPR-6” And “GPR-24” Shear-Out Safety
Dimensional Data, All Sizes
Refer to Drawing No. 662-093.
Size
Dim
1.900" 2-3/8" 2-7/8" 3-1/2" 4" 4-1/2" 5" 5-1/2" 6-5/8" 7"
A 2.345 2.910 3.460 4.180 4.600 5.000 5.560 6.060 7.430 7.625
B 1.610 2.000 2.440 3.000 3.550 4.000 4.410 4.950 5.940 6.365
C 6.6
D 14.0 14.9 15.2 15.4 15.5 15.6 15.8 16.0 16.2
E 17.44 18.8 19.2 19.6 19.7 20.6 21.2 21.7 22.1 22.2
Y 4-1/2" lg 5" lg 5-1/2" lg 6-5/8" lg 7" lg
1.900 NU 2-3/8" NU 2-7/8" NU 3-1/2" NU 4" NU
Z 4-1/2" Sht 5" Sht 5-1/2" Sht 6-5/8" Sht 7" Sht
Rev. New
Unit No. 5597
H06-62055-00 H06-62057-00 H06-62059-00 H06-62061-00 H06-62063-00
1 Top SubO 1
(4-1/2 lg) (5 lg) (5-1/2 lg) (6-5/8 lg) (7 lg)
H06-62056-00 H06-62058-00 H06-62060-00 H06-62062-00 H06-62064-00
2 Bottom SubO 1
(4-1/2 Sht) (5 Sht) (5-1/2 Sht) (6-5/8 Sht) (7 Sht)
3 O-RingQ 2 HWW-B245-H40 HWW-B249-H40 HWW-B253-H40 HWW-B261-H40 HWW-B262-H40
Annealed Steel
4 X 1/2-13 x 5/16 lg 1/2-13 x 3/8 lg 1/2-13 x 7/16 lg
Shear Screw
Page 3 of 4
OMaterial number shown is for part with thread indicated. For different threads, specify first 7 digits of Material number shown and indicate thread desired.
QV40 O-rings required for H2S service.
10-1-03
XRefer to Shear Values chart for number required.
Model “GPR-24” Shear-Out Safety Joint
Rev. New
Unit No. 5597
Dimensional Data, All Sizes
Refer to Drawing No. 662-093.
Size
Dim
2-3/8" 2-7/8" 3-1/2" 4" 4-1/2" 5" 5-1/2" 6-5/8" 7"
A 2.910 3.460 4.180 4.600 5.000 5.560 6.060 7.430 7.625
Page 4 of 4
B 2.000 2.440 3.000 3.550 4.000 4.410 4.950 5.940 6.365
10-1-03
C 24.6
D 32.9 33.2 33.4 33.5 33.6 33.8 34.0 34.2
E 36.4 37.2 37.6 37.7 38.6 39.2 39.7 40.1 40.2
Y 4-1/2" lg 5" lg 5-1/2" lg 6-5/8" lg 7" lg
2-3/8" NU 2-7/8" NU 3-1/2" NU 4" NU
Z 4-1/2" Sht 5" Sht 5-1/2" Sht 6-5/8" Sht 7" Sht
Joint