Variable Frequency Speed Control
Escalator/Passenger conveyors
EC2133D (2103P-J)
Electric Instruction
December In 2009Safety Precautions:
1, Site connection and parts replacing shall, with power off,
be carried on by professionals. It is forbidden to desert
residual wire or metal in the control cabinet, which may cause
a short circuit, an electrical shock or a fire.
2, The control cabinet must be earthed.
3. During maintenance or inspection, precautionary measures
shall be taken to ensure that escalator or auto pavement remains
off without full-time staff’ s notice or consent.
4, The escalator and auto pavement shall be inspected before
its debut and after a great renovation or a period of running. The
inspection and test shall be carried on by competent personnel or
representative approved by the authorities,
5. It shall be affirmed that the escalator or auto pavement is
vacant before or after its normal start or stop.
6. Do not carry hulk or over-length goods with escalator.
7. Make sure the converter-grounding terminal of frequency
conversion control escalator or auto pavement is earthed. Please
don’t touch the output terminal directly. Do not connect the
converter outlet line, which shall not short out, with crust. Make
sure the protective cover in its position and cut off the power
when disassembling it. Cut-off the main circuit power and make sure
the operation panel indicator is off, and then carry on the work
of inspection and maintenance.Table of Contents
Section 1: Electric Instruction
1.1 Use of Escalator/Auto Pavement
1,2 Control of Escalator/Auto Pavement
Section 2: Control Box Debugging Steps
2,1 Phase Sequence Inspection
2.2 Safety Circuit inspection
2.3 Operating Inspection
2.4 Speed Monitoring Inspection
Section 3: Fault Display
Section 4: Safety Devices and Arrangement.
Section 5: Wiring Diagram
Section 6: Electric Priniple Diagram