Documentos de Académico
Documentos de Profesional
Documentos de Cultura
Hawker perfect plus™ motive power batteries provide a high level of power and reliability for all industrial truck
applications, from simple applications with a low capacity loading up to heavy duty multi-shift applications.
Why Hawker perfect plus ?
Hawker perfect plus cells provide a higher efficiency in discharge to most other brands, achieved by advanced
components used in the construction of the positive plates. The sizing of the positive and negative plates has
been optimised according to the volume available in the cell box. The process of filling the positive plates has
been improved. All these technical enhancements have enabled an increase in the cell capacities while keeping
the same exterior dimensions. The Hawker perfect plus DIN & BS range is at the highest technology level of
European standards DIN/EN 60254 and IEC 254-2.
Cell Construction
All Hawker perfect plus cells
use robust tubular plate vented
technology, ideally suited for high
cyclic use under todays demanding
shift applications.
The tubular positive electrodes are
diecast using the highest technology
equipment available and together
with the advanced components and
materials used in their manufacture,
provide increased efficiency and
longer life than most competitors
product in the market.
The cell box and lid are made from
high impact, temperature resistant
polypropylene and heat-seal welded
to prevent electrolyte leakage.
Hawker perfect plus™ batteries are available in sizes to fit ALL international and local brands of material
handling equipment. The cells are assembled into computer aided design steel trays under strict quality
procedures. This design process ensures the batteries are of the correct size, weight and appearance.
Hawker perfect plus™ batteries have the following options available. These options offer increased
productivity, enhanced safety and detailed monitoring and protection of your valuable asset.
®
Hawker Aquamatic™ Airlift electrolyte circulation Hawker WiIQ
The Aquamatic™ water refill system The Hawker WiIQ® has been
makes it possible to top up all the developed by EnerSys to allow full
individual cells of a battery from one monitoring of your battery operation.
central point using an integrated This small device will record battery
cap and tubing system. This system Stratification of the With Electrolyte voltage, Ah in and out, temperature,
saves you valuable time and electrolyte at different Circulation voltage balance, depth of discharge,
specific gravity levels
money maintaining your fleet. The number of cycles, low water events,
Aquamatic caps automatically ensure The Hawker electrolyte circulation discharge time, idle time and recharge
the optimum filling level, stopping system, using the Airlift principle, time.
the flow of water when the level consists of a pipe system fitted inside The memory allows over 2,500 cycles
is correct, avoiding any damaging each cell. A small air pump option of data which can be downloaded
overfill. Inspection points in the in the Hawker HF charger sends a wirelessly from a PC or laptop using
cap also allow measurement of the low rate airflow into the cell during the WiIQ Reporting Suite software for
electrolyte specific gravity. recharge which creates a circulating comprehensive report generation.
The Aquamatic filling system can be air stream inside the cell box. This This data is valuable to ensure your
expertly fitted at the factory or on site system can prevent electrolyte asset is being utilised and maintained
to existing batteries if required. stratification whilst optimising the correctly for maximum life.
charging process.
• High Level of Power and Reliability - from Light to Heavy Duty multi-shift applications
• Advanced construction using the highest quality components
• High Cycle life - Full 1500 cycles*
• Comprehensive range to suit all makes and models
• Controlled global design and assembly processes ensure EnerSys quality every time
• EnerSys global presence for prompt sales, service and support
• Productivity and Management options available for every application and every budget
PzS-cells Hawker perfect plus™ , with bolt-on connectors, dimensions according to DIN/EN 60254-2 and IEC 254-2 Series L standards
DIN Cell
Type
Nominal
Capacity
Plate
Ah
Nominal Max Cell Dimensions
mm
Weight in Kg
with electrolyte
Ah C5 L W H* +/- 5%
DIN Cell
Type
Nominal
Capacity
Plate
Ah
Nominal Max Cell Dimensions
mm
Weight in Kg
with electrolyte
Ah C5 L W H* +/- 5%
BS Cell
Type
Nominal
Capacity
Plate
Ah
Nominal Max Cell Dimensions
mm
Weight in Kg
with electrolyte
Ah C5 L W H* +/- 5%
BS Cell
Type
Nominal
Capacity
Plate
Ah
Nominal Max Cell Dimensions
mm
Weight in Kg
with electrolyte
Ah C5 L W H* +/- 5%