Documentos de Académico
Documentos de Profesional
Documentos de Cultura
solutions for
• Efficiency
• Economy
• Environment
Range of products
ADERCO 2055G : heavy fuel oil highly concentrated sludge dispersant with
vegetal based composition – newly introduced
ADERCO B5500 : combined sludge dispersent and biocide for Diesel / MGO
The characteristics of Aderco products are highly advanced and
corresponds to the highest standards and offer the highest performance.
This molecule is used for ADERCO L1050 – Low Sulphur MGO lubricity
improver
The molecule is also used for ADERCO V25 and V35 – combined with
vegetal based surfactant for Diesel / Petrol / MGO
Characteristics of ADERCO products (3)
3) Biocide molecule
This highly advanced molecule has been developed and introduced to cure
or prevent the Marine Gas Oil and Diesel contamination by bacteria,
yeasts, funghi. This need is growing each year due to the presence of
biodiesels in a lot of fuels and the Fatty Acid Methyl Esther degradation
issue. The product offer
- A high concentration (dosage ratio)
- A stable and easy to disperse molecule
- An acceptable toxicity and hazard characteristics
- A potent molecule for curing preventively or after critical
contamination, the fuel oil tanks
The molecule is also used for ADERCO B5500 – combined with surfactant
for Diesel / Petrol / MGO – offering both virtues at the same time.
ADERCO products short specifications
ADERCO 2050:
available in 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 50 Metric Ton
ADERCO 2055G:
available in 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 55 Metric Ton
ADERCO L1050:
available in 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 30 Metric Ton – if high friction is
expected the dosage rate must be increased.
ADERCO V25:
available in 1Ltr bottle - 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 10 Metric Ton – 10.000 Ltr
ADERCO products short specifications (2)
ADERCO V35:
available in 1Ltr bottle - 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 20 Metric Ton – 20.000 Ltr
ADERCO B2200:
available in 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 20 Metric Ton – preventive action
dosage ratio: 1Ltr per 2 Metric Ton – curative action
ADERCO B5500:
available in 1Ltr bottle - 20Ltr pails or 200 Ltr drums
dosage ratio: 1Ltr per 5 Metric Ton – preventive action
dosage ratio: 1Ltr per 0,5 Metric Ton – curative action
WHAT ARE THE REASONS FOR USING ADERCO
ADDITIVES ?
Heavy Fuel Oil – RMG 180 – 380 Cst
Marine Gas Oil – DMA + Marine Diesel Oil RMA -10/30 Cst
• The cost per liter / Metric ton of fuel is kept at a minimum (due to very
high concentration). ADERCO products compare positively with other
additive solutions
• ADERCO is present since long in large fuel consumption markets like the
shipping, diesel powered power plants
• ADERCO products have a low toxicity and low risk flashpoint which
enables the products to be flown by airplanes in case of urgency