Está en la página 1de 26

Mixly for Arduino

Contents
 1 Introduction - 1
 2 Get Started - 3
 3 Blocks - 4
 4 Driver - 17
 5 Example - 22

Introduction
Arduino is a very popular platform since its being Open Source in terms of both software
and hardware. More and more people want to learn Arduino programming. But once they
open the software Arduino IDE to check the samples, the complicated code frustrates
them. For those without programming basics, Arduino programming is definitely a big
obstacle. Fortunately, you have Mixly – a free, open source, graphical visual programming
language software based on Arduino, which will make programming as easy as building
blocks.
The Mixly GUI software is developed based on Blockly and Java8, which can run on OS
Win7 or above. The Arduino IDE installation file, instructional lessons, and sample code
are included in the package.

The main interface of Mixly is concise and clear. Block categories are at left, the coding
area is at the center. You can see the buttons to center, to zoom in or out, and to delete
at the right side. Then the grey bar at the bottom top is the tool bar including all function
menus, and the area at the very bottom, is the message display.

Get Started
Download the Mixly package, get into the folder Mixly0.995_WIN:
Double click the Mixly icon on your desktop:

For convenience, we can right-click and select Send to -> Desktop (create shortcut) to
create a desktop shortcut.

Blocks
The Mixly includes In/Out, Control, SerialPort, and some other block categories. Next,
let’s get through what these categories cover.

Note: Block categories supports Normal and Advanced views. For more functions, just
click Advanced to use after you've mastered much.
. In/Out: DigitalRead, DigitalWrite, AnalogRead, AnalogWrite, attachInterrupt,
detachInterrupt, ShiftOut, etc.
. Control: Delay, if…do…, repeat…do…, System running time, setup, etc.
. Math: Map, Constrain, operations like +/-, sin/cos, random integer from…to… etc.
. Text: text join, number to string, length of string, compareTo, etc.
. Lists: create list, get item at list, set item at list, etc.
. Logic: if conditional statement, logical operations
. SerialPort: set baud rate, print data, read data
. Communicate: IR receive, IR send, I2C read/write device, to SPI, etc.
. Sensor: ultrasonic, DHT11, DS18B20
. Actuator: Tone control, servo and stepper control.
. Monitor: setup LCD pin, LCD print data, set LCD I2C address
. Variables: High/Low, True/False, float, integer, Boolean, string variables, etc.
. Functions: define function, do procedure with, etc.

Driver
When you connect the Arduino or SunFounder board to the computer, it may show
“Unknown Device” or “USB Serial Port” with a yellow exclamation mark.
At that time, you need to install the driver yourself.ight-click on the “Unknown Device” or
the “USB Serial Port” with yellow exclamation mark, and click “Update Driver Software”.

Then click “Browse my computer for driver software”.

Click Browse, and select the path to Mixly-


Rollman\Mixly0.995_WIN\Mixly0.995_WIN\arduino-1.8.2\drivers
Then click Next.
Click "Install this driver software anyway".
The driver will be installed successfully after a while. If it fails, replug the USB cable to try
and repeat the previous operations.

OK. That's all for the basics of the Mixly software. We'll probe into details later in specific
lessons. Get familiar with them and you will find it pretty easy to catch up the following
code tutorials. Good luck!
Example
Let’s start Mixly learning from programming a very simple project, blinking LED. First,
make sure the LED is connected to pin 9. Drag out a digitalWrite block from In/Out.

Set pin 9 to High to light up the LED.


Then drag out a Delay block from Control category

Set the value to 500, i.e. 0.5s.

Then set pin 9 to LOW in the same way, and keep this state for 0.5s. Thus the LED will
be blinking.
Connect the board to computer, and select the board type and port.

Upload the program, then we can see the LED blinking.


http://wiki.sunfounder.cc/index.php?title=Get_started_with_Mixly

También podría gustarte