Documentos de Académico
Documentos de Profesional
Documentos de Cultura
ELBOW GRS
PRODUCT FEATURES
Epoxy Cable Base Double Mechanical Seals
An epoxy resin seal cable base prevents Superior abrasion resistant mechanical seal
moisture from entering the motor through manufactured with silicon carbide to ensure
the core wires. the best seal effect.
www.hcppump.com.tw
● ● ●
Distributor:
AL 50Hz & 60Hz
SERIES
SUBMERSIBLE WASTEWATER
We reserve the right to alter specifications of product at any time without giving prior notice.
DALEN0-1611 / EFFLUENT PUMPS
50AL21.5
50AL22.2
80AL21.5
80AL22.2
80(100)AL25.5
80(100)AL27.5 PERFORMANCE CURVES
m 100 200
80AL23.7A 80(100)AL211 m
50Hz 60Hz
50A 50
20 20 AL
FEATURES SPECIFICATIONS L22 22
.2 .2 60
50A 50
L21 AL
80A 21
.5 .5 80A
Pump body is made of casting iron which Item Description 80AL
L22
.2 L22
40
10
21.5 10 80A .2
make pump firm, and reliable. L21
Liquid Temp. 0~40°C (32~104°F) .5
Limits 20
The thickness of High Solids Epoxy Coating Of Use Applications Wastewater Sewage and Drainage water
can be greater than 100 μm. This heavy Frequency 0 0
50/60Hz 0
coating provides good resistance to salty 0 0.2 0.4 0.6 0.8 1.0 m ³/m in 0 0.2 0.4 0.6 0.8 1.0 m ³/m in
sea water, industry wastewater and chemical Motor 2P (50Hz 3000rpm.60Hz 3600rpm).Dry Motor 0 10 20 30 40 50 60 m ³/h 0 10 20 30 40 50 60 m ³/h
fluid.The coating can be firmly attached Insulation Class B (2~3HP) • Class F (5~15HP) 200 400
to metals, such as iron and steel, and form
an anti- corrosion layer on metal surface Protection IP68 80(1
00)A 50Hz 50 80(
100 60Hz 160
L21 )AL
for preventing corrosion. Type 1 211 140
Protector Auot-cut • MTS/MS(15HP) 40
80( 80(
100 100 120
Bearing Ball Type )AL )AL
HCP-designed high head and high efficient 80( 27.5 80( 27.5
100 30 100 100
)AL )AL
impeller which is particularly suitable for M.seal Double M.seals 80A
L23
25.
5
80A
L23
25.
5 80
high-rise building and deep basement. Impeller Semi-open
.7A 20 .7A
60
3" 3" 40
Fully equipped including, epoxy resin Upper Cover FC200 10 4"
3"
sealed water-tight cable base, auto-cut Motor Frame FC200
4" 4" 20
motor protector and double set mechanical 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 m ³/m in
0
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 m ³/m in
0
seal, All components are produced with Shaft SUS403 (2~10HP) • SUS420J2 (15HP)
0 20 40 60 80 100 120 m ³/h
0 20 40 60 80 100 120 m ³/h
strict quality control.
Upper : Carbon/ceramic
M.seal
Material Lower : Silicon/Silicon
50Hz
1 Capacitor
80AL22.2 3(2.2) 3"(80) 12.5 0.6 36 20 39 35 391 249 214 602 520
3 Direct
Handle Cable 80AL23.7A 5(3.7) 3"(80) 3 Direct 20.5 0.6 36 20 - 49 470 278 242 - 578
PRODUCT 80(100)AL25.5 7.5(5.5)
3"(80)
3 Direct
28 0.6 36
20 - 75
534
342 290 - 689
4"(100) 21.5 1.0 60 565
NOMENCLATURE Upper cover
Bearing Cable base 80(100)AL27.5 10(7.5)
3"(80)
4"(100)
3 Direct
34.5
27
0.6
1.0
36
60
20 - 81
534
565
342 290 - 689
C
3 Direct
Oil seal 1 Capacitor
80AL21.5 2(1.5) 3"(80) 8-0.6 26-158 20(3/4") 37(82) 32(71) 391 249 214 575 520
3 Direct
60Hz
1 Capacitor
Casing 80AL22.2 3(2.2) 3"(80) 12-0.6 39-158 20(3/4") 39(86) 35(77) 391 249 214 602 520
Air vent bolt 3 Direct
80AL23.7A 5(3.7) 3"(80) 3 Direct 20.5-0.6 67-158 20(3/4") - 49(108) 470 278 242 - 578
Lubricant
Impeller 3"(80) 26.5-0.6 87-158 534
80(100)AL25.5 7.5(5.5) 3 Direct 20(3/4") - 74(163) 342 290 - 689
D
Strainer 4"(100) 20-1.0 66-265 565
50AL21.5 3"(80) 34.5-0.6 113-160 534
80AL21.5 / 80AL22.2 80(100)AL27.5 10(7.5) 3 Direct 20(3/4") - 80(176) 342 290 - 689
4"(100) 27-1.0 89-265 565
3"(80) 46-0.6 151-158 20(3/4") 534
80(100)AL211 15(11) 3 S-D/Direct - 90(198) 342 290 - 729
4"(100) 39.5-1.0 130-265 565