Documentos de Académico
Documentos de Profesional
Documentos de Cultura
UNIT - I
1 INTRODUCTION
1.1 INTRODUCTION
Research is a systematic and objective process of gathering, recording and analyzing data for aid in making
business decisions. Business research is a systematic and organized effort to investigate a specific problem
encountered in the work setting that needs a solution
SIGNIFICANCE OF RESEARCH
Research inculcates scientific thinking: Research inculcates scientific and inductive thinking and it
promotes the development of logical habits of thinking and organization.
Increasing role of research: The role of research in several fields of applied economics, whether related
to business or to the economy as a whole, has greatly increased in modern times. The increasingly complex
nature of business and government focused attention on the use of research in solving operational
problems.
1
PPG INSTITUTE OF TECHNOLOGY
Research provides the basis for nearly all government policies in economic system.
Solving operational and planning problems: Research has its special significance in solving various
operational and planning problems of business and industry. Operations research and market research,
along with motivational research, are considered crucial and their results assist, in more than one way in
taking business decisions.
Important for social scientists: Research is equally important for social scientists in studying social
relationships and in seeking answers to various social problems. It provides the intellectual satisfaction
knowing a few things just for sake of knowledge and also has practical utility for the social scientists to
know the sake of being able to do something better or in a more efficient manner.
Significance of research can also be understood keeping in view the following points:
1) To those students who are write to master’s or ph. D thesis, research, may mean a careerism
or a way to attain a high position in the social structure;
2) To professionals in research methodology, research may mean a source of livelihood;
3) To philosophers and thinkers, research may mean the outlet for new ideas and insights;
4) To literary men and women, research may mean the development of new styles and creative
work;
5) To analysis and intellectuals, research may mean the generalization of new theories
The formulation of a general topic into a specific research problem thus constitutes the first step in a
scientific enquiry. Essentially two steps are involved in formulating the research problem, viz.,
understanding the problem thoroughly, and rephrasing the same into meaningful terms from an analytical
point of view.
2
PPG INSTITUTE OF TECHNOLOGY
After extensive literature survey, researcher should state in clear terms the working hypothesis. It is
tentative assumption made in order to draw out and test its logical or empirical consequences.
Research design includes the means of obtaining the information, explanation of the way in which selected
means of obtaining information will be organized and the reasoning leading to the selection.
A sample design is a definite plan determined before nay data are actually collected for obtaining a sample
from a given population.
Data are two types – Primary data and Secondary data. Primary data can be collected by observation,
through personal interview, through telephone interviews, by mailing of questionnaires, through
schedules.
Analysis of data
The analysis of data requires a number of closely related operations such as establishment of categories,
the application of these categories to raw data through coding, tabulation and then drawing statistical
inferences.
Finally, the researcher has to prepare the report of what has been done by him. The main text of the report
should have the following parts
1. Introduction
2. Summary of findings
3. Main report
4. Conclusion
3
PPG INSTITUTE OF TECHNOLOGY
RESEARCH PROCESS
Review the FF
literature FF
Review
Concepts Analyse
Design
And Collect Data
Research Interpret
Define theories Formulate Data (Test
(Including and
Research hypothesis (Execution) Hypothesis
Sample report
Problem if any)
Review Design)
Previous
F F
I Research III IV V
findings VI VII
II
F
F Feed Back
FF Feed Forward
Pure Research is undertaken for the sake of knowledge without any intention to apply it in
practice
Applied research is carried on to find solution to a real life problem requiring an action or policy
decision.
Problem oriented
Action directed
4
PPG INSTITUTE OF TECHNOLOGY
Exploratory Research analyses the data and explores the possibility of obtaining as many
relationships as possible.
It is a preliminary study of an unfamiliar problem about which the researcher has little or
no knowledge.
“ To see what is there rather than to predict the relationships that will be founded”
Descriptive research
Diagnostic study
– It aims in identifying the cause of the problem and the possible solution for it
Evaluation studies
Action Research
• It is a concurrent evaluation study of an action programme launched for solving a problem for
improving existing situation
5
PPG INSTITUTE OF TECHNOLOGY
Experimental Research
• It is to assess the effects of particular variables on a phenomenon by keeping the other variables
constant or controlled
– To determine whether and in what manner variables are related to each other
– The factor , which is influenced , by other factors is called a dependent variable, and the
other factors , which influence it are known as independent variables
– EX: agricultural productivity (i.e) is a dependent variable and the factors such as soil
fertility, irrigation, quality of seed etc. which influences the yield are independent
variables.
Analytical studies
• Used to measure variables, comparing groups and examining association with factors
Historical research
• Its main objective is to draw explanations and generalizations from the past trends in order to
understand the present and to anticipate the future.
Surveys
6
PPG INSTITUTE OF TECHNOLOGY
• It requires expert and imaginative planning, careful analysis and rational interpretation of the
findings
Case Study
Field studies
It is a scientific enquiries aimed at discovering the relations and interactions among sociological,
psychological and educational variables in social institutions and actual life situations like communities,
school, factories etc
• A social or institutional situation is selected and the relations among the attitudes, values,
perceptions and behaviors of individuals and groups in the selected situation are studied.
Theoretical Research
Empirical Research
Theoretical research: Theoretical research generally uses the findings from existing works to develop
new ideas through analyzing existing theory and explanations. These new ideas are not tested through
collecting evidence in the form of primary data. Theoretical research is held to be a classical way of adding
something to the value of the body of knowledge.
In the business and management studies world theoretical research is not always well received. In fact
some academic researchers would argue that the process described as theoretical research should not be
regarded as “proper” academic research. The basis of such a claim is that this type of theoretical research
does not have a test component. This fact is used by those who are not enthusiastic about theoretical
7
PPG INSTITUTE OF TECHNOLOGY
research, to imply that theories can postulated without any “proof”. However this type of thinking is a
misunderstanding of the nature of research. All research processes requires conceptualization. One of the
primary roles of theoretical research is to rework already established ideas in order to improve insights
into the subject matter. Such improvements could well-constitute adding something of value to the body
of knowledge.
Evaluating theoretical research: theoretical research does not rely on data or evidence, collection, analysis
and synthesis it is sometimes often said to be more difficult. Theoretical research relies heavily on
creativity and imagination. Al though these attributes are still required for empirical research they are
often required to a greater extent in theoretical research.
Empirical research: empirical means based upon observation or measurement rather than theoretical
reasoning. It supports the development of new ideas through the collection of data. The researcher who
develops a theory of spot fan violence through visiting a library and developing their own explanation
through reading existing work will be undertaking theoretical research. The researcher to take this one
step further and collects data test their explanation will be undertaking empirical research. For example,
computer simulations generate scores from random number routines. The cases and measures are not
involved. Analytical researchers use mathematical operations to work from initial assumptions to
conclusions there are no cases, measures, or scores.
Measurement: it involves activities associated with measuring the factors that from the expected
relationship. In other situations, a researcher may begin with measures already developed and assess their
suitability for a study at hand.
Research design: it establishes procedures to obtain cases for study and to determine how scores will be
obtained from those cases.
Analysis: empirical research also involves analysis of scores. Analyses are performed to describe crosses
on single measures and, especially, to identify relationships that may exist between scores across different
measures.
8
PPG INSTITUTE OF TECHNOLOGY
1) Time: Since empirical research requires soliciting participation and “data gathering”
from various off campus of researchers.
2) Cost: Field research requires on-sites visits by researchers may be require cash outlays
for travel, lodging, and other expenses not required in conceptual research, which can
usually be accomplished in the local academic setting.
3) Access to firms: they cannot gain access to the types of the firms necessary for their
studies.
4) Access to data: even if they gain access to business firms, such firms may be reluctant
to release any or all the data necessary for the studies.
5) Skills: they do not possess the requisite skills necessary to design such empirically
based studies, to gather and analyze the oftentimes huge data efficiently, or two
interpret the results in a manner meaningful to and rewarded by both the business and
academic worlds.
Two types:
Cross-sectional Research
Longitudinal Research
9
PPG INSTITUTE OF TECHNOLOGY
Cross-sectional research: in this research, researchers observe at one point in time. Cross-sectional
research is usually the simplest and least costly alternative. A cross- sectional designs a snapshot of the
variables included in the study, at one particular point in time. It may reveal how those variables are
related.
Longitudinal Research: Researchers using longitudinal research examine features of people or other
units at more than one time it is usually more complex and costly than cross sectional research, but it is
also more powerful, especially where researchers seek answers to questions about social change. Three
types of longitudinal research which as follows;
1) Time-series research
2) Panel study
3) Cohort study
Time series research: the time design collects data on the same variable at regular intervals (weeks,
months, year) etc
Panel study: it is a powerful type of longitudinal research. It is more difficult to conduct than time series
research. In panel study, researchers observe exactly the same people, group, or organization across time
period. Participants who are examined over repeated time points may be affected by having previously
completed the measure being used. (This is known as sensitization)
Cohort study: it is similar to the panel study, but rather than observing the exact same people, a category
of people who share a similar life experienced in a specified time period is studied.
10
PPG INSTITUTE OF TECHNOLOGY
Research Problem refers to some difficulty /need which a researcher experiences in the context of
either theoretical or practical situation and wants to obtain a solution for the same.
The first step in the research process – definition of the problem involves two activities:
This step involves identification of a few problems and selection of one out of them, after
evaluating the alternatives against certain selection criteria.
Formulation is the process of refining the research ideas into research questions and objectives.
Formulation means translating and transforming the selected research problem/topic/idea into a
scientifically researchable question. It is concerned with specifying exactly what the research
problem is.
CRITERIA OF SELECTION
The selection of one appropriate researchable problem out of the identified problems requires
evaluation of those alternatives against certain criteria. They are:
External Criteria or Factors – Researchability of the problem, Importance and Urgency, Novelty
of the Problem, Feasibility, Facilities, Usefulness and Social Relevance, Research Personnel.
SOURCES OF PROBLEMS
Reading
11
PPG INSTITUTE OF TECHNOLOGY
Academic Experience
Daily Experience
Consultations
Brainstorming
Research
Intuition
• Problem Formulation
For a researcher, the problem formulation means converting the management problem to a research
problem.
Examples
To increase the sales or does it means it has improved the knowledge of the audience.
12
PPG INSTITUTE OF TECHNOLOGY
If the advertisement by the company was indeed ineffective, what course of action does the
company intend to take?
Go to a new agency.
Presently, who are the competitors in the market with similar product?
What is the perception of the people about other products of the company?
Initial investigation could be carried by using a focus group of consumers or sales representatives
Did the customer ever include this company’s product in his mental map?
The researcher would be better served by generating as many alternatives as possible during the
problem formulation.
13
PPG INSTITUTE OF TECHNOLOGY
For every alternative, a hypothesis has to be developed and data to be collected and to be proved
whether it is best alternative or not.
It’s not long term goal, but is the step towards the long term goal.
It defines the purpose of the proposed research. It should be phrased in such a way that central
hypothesis clearly grows out of it
-Hypothesis driven
-Innovative
Hypothesis is defined as the proposition or a set of proposition set forth as an explanation for the
occurrence of some specified group of phenomena, either asserted merely as a provisional conjecture to
guide some investigation or accepted as highly probable in the right of established facts.
Characteristics of hypothesis
14
PPG INSTITUTE OF TECHNOLOGY
Eg: Companies manufacturing washing machines spend at least 10% of their annual profits on
advertising.
Testing Hypothesis: This is a statement or proposition that we would like to verify whether it is true
or not.
A Null hypothesis is a statement about a population parameter (such as mu) and the test is used to
decide whether or not to accept the hypothesis.
Eg: Suppose a person is facing a legal trial for committing a crime. The judge look into all the
evidence for and against it listens very carefully the prosecutions and defendants arguments and
then decides the case and gives his verdict.
15
PPG INSTITUTE OF TECHNOLOGY
Type I error: it occurs when one rejects the null hypothesis and accepts the alternative, when
it fact the null hypothesis is true.
Type II error: it occurs when one accepts the null hypothesis when in fact the null hypothesis
is false.
16
PPG INSTITUTE OF TECHNOLOGY
UNIT -II
2.1 RESEARCH DESIGN MEANING AND TYPES
A research project conducted scientifically has a specific framework of research from the problems
identification to the presentation of the research report. This framework of conducting research is known
as the research design.
A research designs simply the framework or plan for a study that is used as a guide in collecting and
analyzing the data. It is blueprint that is followed in completing study”.
1) Exploratory Research
v) Two-Stage Design
17
PPG INSTITUTE OF TECHNOLOGY
2) Conclusive Research
i) Descriptive
a) Longitudinal Study
b) Cross-sectional Study
Exploratory research studies are also termed as formulative research studies. The main purpose of such
studies is that of formulating a problem for more precise investigation or of developing the working
hypotheses from an operational point of view. The major emphasis in such studies is on the discovery of
ideas and insights. As such the research design appropriate for such studies must be flexible enough to
provide opportunity for considering different aspects of a problem under study.
1. Study of Secondary Data: The quickest and most economical way is to find possible hypotheses from
the available literature. The past researches may be suitable sources of information to develop new
hypotheses. The findings of marketing research are generally published in trade and professional journals,
which can be fruitful sources of information.
18
PPG INSTITUTE OF TECHNOLOGY
2) Depth Interview: Experience survey means the survey of people who have had practical experience
with the problem to be studied. These individuals can be top executives, sales managers/executives,
wholesalers and retailers possessing valuable knowledge and information about the problem environment.
3) Case Study: The third general type of exploratory research is the case method. This research method
has long been considered “soft” or nonscientific, but with the modern surge in qualitative research the
case method has received more attention. Indeed, the case method might be considered one variation of
the survey of individuals with ideas. It involves the comprehensive study of one, or a few, specific
situations and lends itself particularly to the study of complex situations in which the interrelations of
several individuals are import – for example, the effective management of distributor relations or what
constitutes good marketing management.
4) Focus Group: Focus group originates from sociology studies. They have been extensively used in
marketing research. Focus groups studied are generally conducted to evaluate the potential of a new
product idea or concept. A focus group comprises several persons, who are led by a trained moderator.
The moderator’s task is to lead the team in generating and exchanging ideas on a particular issue. The
process starts by issuing a topic for discussion among participants by the moderator. In such discussions,
the moderator’s role will be to silently watch the proceedings and ensure that the discussion is going on
as expected. However, the moderator needs to intervene to ensure that all individuals in the group
participate. Once the focus group’s observations and recommendations are obtains, the information is
evaluated by the moderator,. This forms the basis for further research.
5) Two-Stage Design: A two-stage design is beneficial approach for designing research. In this method,
the exploration is conducted in two stages. The first stage consists of clearly defining the research problem,
while the second stage comprises developing the research design. A two-stage design is beneficial, when
the problem is vaguely defined and the researcher is not clear about the particular topic that has to be
studied.
19
PPG INSTITUTE OF TECHNOLOGY
Conclusive research provides information, which helps the executive to make a rational decision. The
marketing executive has to arrive at a suitable decision from the various alternative decisions. The various
alternative conclusions and selecting the most suitable conclusion may be done by descriptive research
design or experimental research design.
i. Descriptive Research
Descriptive studies, as their name implies, are designed to describe something – for example, the
characteristics of users of a given product; the degree to which product use varies with income, age, sex,
or other characteristics, or the number who saw a specific television commercial. A majority of marketing
studies are of this type.
1) Case Method: Case studies are more appropriate to exploratory research than descriptive research.
They are not widely used in descriptive research, but they are worth some comment in the descriptive
context and perhaps should be used more than they have been in the past.
2) Statistical Method: The statistical method is the most widely used method in marketing research
and is the method usually implied when a “survey” is referred to. The name comes from the statistical
techniques that are used in analyzing the data collected – techniques that vary from simple means and
percentage to very sophisticated techniques that require computers to manipulate the data.
20
PPG INSTITUTE OF TECHNOLOGY
1) Consumer profiles
4) Attitude surveys
5) Sales analysis
6) Media research
7) Price surveys
1) Longitudinal Design/Panel Analysis: Longitudinal studies are based on panel data and panel
methods. A panel is a sample of respondents who are interviewed and then re-interviewed from
time to time. Generally panel data relate to the repeated measurements of the same variables. Each
family included in the panel, records its purchases of a number of product at regular intervals, say,
weekly, monthly or quarterly. Over a period of time, such data will reflect changes in the buying
behavior or families.
21
PPG INSTITUTE OF TECHNOLOGY
Although descriptive research in identifying co-variation between variables (e.g., blue packages
outsell red ones, consumption rate varies by education level) it cannot truly indicate causality (e.g., color
causes sales, education causes consumption). When we are in need of determining whether two or more
variables are causally related we must turn to casual research procedures. While there might be a tendency
to see many research objectives from a casual perspective (“We really want to know what causes
consumers to act that way”), there is a difference between causality in the vernacular and how it is defined
by scientists.
Informal
Formal
Informal design
22
PPG INSTITUTE OF TECHNOLOGY
In such a design a design a single test group or area is selected and the dependent variable is measured
before the introduction of the treatment. The treatment is then introduced and the dependent variable is
measured again after the treatment has been introduced.
In this design two groups or areas (test are and control area) are selected and the treatment is introduced
into the test area only. Treatment impact is assessed by subtracting the dependent variable in the control
area from its value in the test area.
In this design two areas are selected and the dependent variable is measured in the both the area for an
identical time period before the treatment. The treatment is then introduced into the test area only, and the
dependent variable is measured in both for an identical time period after the introduction of the treatment.
One variable of the “after only “design is called the ex post facto design. This differs from the “after only”
design because the experimental and control groups are selected after the experimental variable is
introduced instead of before. One advantage is that the test subject cannot be influenced, pro or con, toward
the subject by knowing they are being tested, since they are exposed to the experimental variable before
being selected for the sample.
Panel design
A permanent set of experimental units used in market research investigation is known as a ‘panel’. Panel
can be used both for exploratory and conclusive research. In such an experimental observation are
recorded at some pre d determined intervals of time and experimental variables can be introduced if and
when desired. Here any two set of successive measurements between which some experimental variable
is introduced can be considered as before and after experimental measurements.
23
PPG INSTITUTE OF TECHNOLOGY
Some dealers or retailers are selected for recording observation over certain period of time. Eg: to study
the impact of some advertising policy on sales, one may select some dealer or retailers. the sales during a
certain period before the advertisement and after the advertisement are recorded.
Here the advertising policy is introduced, removed and introduced over different period of time and sales
over these periods are recorded.
Formal design
The main feature of this design is that the experimental treatments are assigned to the test units completely
at random. No prior precaution is needed to some extraneous variable before the assignment is randomly
made.
It is an improvement over the CR design. In this design the principal of local control can be applied along
with the other two principles of experimental design. In this design subjects are first divided into groups,
known as blocks, such that within that group the subjects are relatively homogeneous in respect to some
selected variables
This design suggest that test will from a square because there will be as many tests units are treatments.
This design is used to control important extraneous influence. It is assumed that each treatment occurs
once with each store on a block. There are several stores in a block, there must be as many blocks as there
are treatments. It may be three, four and so on.
24
PPG INSTITUTE OF TECHNOLOGY
An independent variable is the presumed cause of the dependent variable- the presumed effect. When it
can say A cause B , it means A is independent variable and B is dependent variable. The independent
variable thus is one which explains or accounts variation in the dependent variable.
The experimental variable spell out the detail of the investigator’s manipulation while the measured
variable refer to measurement. For example, rural development(measured variable) may be assessed in
terms of increase in income, literacy, infrastructure......
The Quantitative variable is one whose values or categories consist of number and differences between
it’s categories can be expressed numerically. Eg: age, income, size......The qualitative variable is one
which consist of discreet categories rather than numerical units
Numerical variables are broken down into units in which the numbers used carry mathematical meaning.
The numbers may be either discrete (1,2,3,4..)which cannot be broken down into smaller fractional
quantities(no. Of children)or continuous.
By measurement we mean the process of assigning numbers to objects or observations, the level of
measurement being a function of the rules under which the numbers are assigned.
According to kenneth D. Bailey: “Measurement is the process of determining the value or level, either
qualitative or quantitative, of a particular attribute for a particular unit of analysis”.
II. Developing a set of mapping rules- a scheme for assigning numbers or symbols to represent aspect
of the event being measured.
Mapping rules
25
PPG INSTITUTE OF TECHNOLOGY
In measuring, one devices some mapping rule and then translate the observation of property indicants
using this rule. For each concept or construct, several types of measurement are possible; the appropriate
choice depends on what you assume about the mapping rules. Each one has its own set of underlying
assumption about how the numerical symbols correspond to real world observation.
Importance of measurement
2) The level of statistical sophistication used to analyze data derived from a study is directly
dependent on the scale of measurement used to quantify the variables of interest.
Functions of measurement
Empirical description: it facilitates empirical description of social and psychological phenomena. Eg:-in
a study of a tribal community, the researcher has to classify and categorize the cultural patterns and
behaviors.
Measurement scales
1) Nominal scale
2) Ordinal scale
3) Interval scale
26
PPG INSTITUTE OF TECHNOLOGY
4) Ratio scale
Nominal scale
It represents the most elementary level of measurement. a nominal scale assigns a value to an object
for identification or classification purposes. The value can be a number because no quantities are being
represented. In this sense, a nominal scale is truly a qualitative scale. Nominal scales are extremely
useful even though they can be considered elementary.
Marketing researchers use this scale quite often. For example, suppose three old drinks were
experimented with taste. The researcher would like the experiment to be blind, so when subject were
asked to taste one of the three cold drink, the drinks were labeled A,B or C.
Ordinal scaling
Ordinal scales have nominal properties, but they also allow things to be arranged based on how much
of some concept they possess. In other words, an ordinal scale is a ranking scale. The ordinal scale
indicates the relative position of two or more objects or some characteristics. The consumers are asked
to rank preference for several brands, flavor or package designs. The measures of such preference are
ordinal in nature.
Interval scale
The interval scale has all characteristics of the ordinal scale and in addition, the units of measures or
intervals between successive positions are equal.
Eg:- a researcher scaled brand A,B and C on an interval scale regarding the buyers ‘ degree of liking
of the brands. Brand A receives the highest liking score 6, B received 3 and C receives 2. First the
liking for brand A is more favorable than that for brand B. second the degree of liking between A and
B is three times greater than the liking between B and C.
Ratio scale
Ratio scale represents the highest form of measurement. They have all the properties of interval scale
with the additional attribute of representing absolute quantities. Interval scale represents only relative
27
PPG INSTITUTE OF TECHNOLOGY
meaning, whereas ratio scale represents absolute meaning. In other words, ratio scale provides iconic
measurement. Zero, therefore, has meaning in that it represents an absence of some concept. An
absolute zero is a defining characteristic in determining between ratio and interval scale.
SCALING TECHNIQUES
Stapel
COMPARATIVE SCALES
NON-COMPARATIVE SCALES
28
PPG INSTITUTE OF TECHNOLOGY
Please indicate which of the following airlines you prefer by circling your more preferred airline in each pair:
• Allocate a total of 100 points among the following soft-drinks depending on how favorable you
feel toward each; the more highly you think of each soft-drink, the more points you should allocate
to it. (Please check that the allocated points add to 100.)
Rank the following soft-drinks from 1 (best) to 5 (worst) according to your taste preference:
Coca-Cola _____
7-Up _____
Fanta _____
Pepsi-Cola _____
29
PPG INSTITUTE OF TECHNOLOGY
Here are a number of statements that could be used to describe Tesco. For each statement tick ( ) the
box that best describes your feelings about Tesco.
Stapel Scale
+5 +5 +5
+4 +4 +4
+3 +3 +3
+2 +2 +2
+1 +1 +1
-1 -1 -1
-2 -2 -2
-3 -3 -3
-4 -4 -4
-5 -5 -5
30
PPG INSTITUTE OF TECHNOLOGY
1. Reliability
• The degree to which a measure accurately captures a true outcome without error
2. Validity
• The degree to which a measure faithfully represents the underlying concept (it asks the
right questions)
3. Sensitivity
The ability to discriminate meaningful differences between attitudes. The more categories the more
sensitive (but less reliable
Scale is perfectly accurate, but is capturing the wrong thing; for example, it measures consumers’
interest in creative writing rather than preference for kinds of stationery.
31
PPG INSTITUTE OF TECHNOLOGY
Scale genuinely measures consumers’ interest in kinds of stationery, but poorly worded items,
sloppy administration, data entry errors lead to random errors in data
2.6 Reliability
• Reliability refers to how consistent a measuring device is. A measurement is said to be reliable or
consistent if the measurement can produce similar results if used again in similar circumstances.
• Validity
This refers to whether a study measures or examines what it claims to measure or examine. Valid
measures will ALWAYS be reliable…but reliable measures are not necessarily valid.
• Reliability' of any research is the degree to which it gives an accurate score across a range of
measurement. It can thus be viewed as being 'repeatability' or 'consistency'. In summary:
• TEST-RETEST RELIABILITY
2 measures yield identical (or similar) results at 2 different times. The test-retest reliability method
is one of the simplest ways of testing the stability and reliability of an instrument overtime. For
example, a group of respondents is tested for IQ scores: each respondent is tested twice - the two
tests are, say, a month apart. Then, the correlation coefficient between two sets of IQ-scores is a
reasonable measure of the test-retest reliability of this test.
32
PPG INSTITUTE OF TECHNOLOGY
Parallel forms reliability is used to assess the consistency of the results of two tests constructed in
the same way using the same content. To create the parallel forms a large pool of test questions
that measure the same quality are created and then randomly divided into two separate tests. Each
test is given to the same sample of people and the correlation between the two parallel forms is
used as an estimate of the reliability.
Is the degree to which a test measures an intended content area, e.g., achievement tests. Example:
to measure knowledge of parenting skills could be obtained by consulting experts such as social
workers, parents. Judgment is dependent upon the knowledge of the experts
Construct validity
Is the degree to which a test measures an intended hypothetical construct? i.e., a non-observable
trait, such as intelligence, which explains behavior
Criterion validity
Describes the extent to which a correlation exists between the measuring instrument & standard
— empirical evidence. E.g., the relationship between College Board examination and student
academic success in college. Two measures need to be taken: the measure of the test itself & the
criterion to which the test is related
Reliability: the degree to which a measurement procedure produces similar outcomes when it is
repeated. E.g., gender, birthplace, mother’s name should be the same always.
Validity: tests for determining whether a measure is measuring the concept that the researcher
thinks is being measured, i.e., “Am I measuring what I think I am measuring”?
33
PPG INSTITUTE OF TECHNOLOGY
UNIT - III
3 INTRODUCTION
2. INTRODUCTION:
3.1 TYPES OF DATA: The task of data collection begins after a research problem has been defined and
researches design/chalked out. While deciding about method of data collection to be used for the study,
the researcher should keep in mind two types of data viz ,primary and secondary data.
The primary data are those data, which are collected afresh and for the first time, and those happen to be
original in character. The secondary data, on the other hand, are those which have already been collected
by someone else and which have already been passed through the statistical process.
1) primary data
2) secondary data
34
PPG INSTITUTE OF TECHNOLOGY
Primary data
Primary data is the one, which is collected by the investigator himself for the purpose of a specific inquiry
or study. Such data is original in character and is generated by survey conducted by individuals or research
institutions or any organization.
The objectives of primary data are formulated on the basis of research objectives. Objectives set the
guidelines and direction research planning. Formulating the objectives offers the best feasible means of
solution.
Reliability
Availability of a wide range of techniques
Addresses specific research issues
Greater control
Efficient spending for information
Limitations
Time consuming
High cost
Not always feasible
Large volume of data
Reluctance of respondents
Secondary data
Secondary data are those data which have been already collected and analyzed by some earlier agency
for its own use; and later the same data are used by a different agency.
35
PPG INSTITUTE OF TECHNOLOGY
Internal secondary data is a part of the company's record, for which research is already conducted.
Eg: Daily production report, monthly collection report.
External Secondary data
The data collected by the researcher from outside the company.
This can be divided into four parts:
Census data
Census of the whole sale trade
Census of the retail trade
Population Census
Census of manufacturing industries
Individual project report being published
Encyclopedia of business information sources
Syndicated data is an important form of secondary data which may be
classified into
Consumer purchase data
Retailer and whole sale data
Advertising data
Advantages of secondary data
Economy
Quickness
Quality
No need of measuring instruments
Availability
Bases for comparison
Useful in exploratory research
Generates feasible alternatives
36
PPG INSTITUTE OF TECHNOLOGY
37
PPG INSTITUTE OF TECHNOLOGY
Survey techniques
Survey techniques can be divided into three broad categories as in figure below.
Survey
techniques
Interview method
Interviewing is one of the prominent methods of collection. It may be defined as a two-way systematic
conversation between an investigator and an informant, initiated for obtaining information relevant to a
Specific study.
Interviewing requires face to face contact over telephone and calls for interviewing skills. It is done by
using a structured schedule or an unstructured guide.
38
PPG INSTITUTE OF TECHNOLOGY
Types of interview
Personal interview
Unstructured and direct interview
Structured and direct interviews
Unstructured and indirect interviews
Telephone interview
Panel interview
Electronic interview
Expensive
Subject to bias and personal traits
Ineffective in some areas
Recording complexities
demands skilled interviewers
subjective
Questionnaire method
The questionnaire is the list of questions to be asked from the respondents. It also contains a suitable
space where the answers can be recorded.
39
PPG INSTITUTE OF TECHNOLOGY
A questionnaire is a method of obtaining specific information about a defined problem so that the data,
after analysis and interpretation, results in a better appreciation of the problem. a questionnaire form
,which has to be completed by an interviewer, is often referred as schedule
Types of questionnaire
Validation of questionnaire
To achieve high quality survey result, a critical component is validating the instrument (questionnaire)
reliability and validity. The validity of questionnaire is assessed by three components
1. Content validation: It often refers face validity. Face validity is determined by comparing the
questionnaire with other similar questionnaire surveys.
2. Sampling validity: It is another component of validation. A large sample size can ensure low
sampling errors and high sampling validity.
3. Empirical validity: It examines the survey result by comparison with other studies. The aim is to
check consistency with previous results. Empirical validation of questionnaire reliability often
involves two techniques:
40
PPG INSTITUTE OF TECHNOLOGY
Schedule
It is a device in social research, which is most frequently used in collecting field data especially where the
survey method is employed. It is used in indirect interview. It contains questions and blank tables, which
are to be filled in by the investigators themselves after getting information from the respondents.
41
PPG INSTITUTE OF TECHNOLOGY
Observation Method
• Structured or unstructured method
• Disguised or undisguised method
• Direct-indirect observation
42
PPG INSTITUTE OF TECHNOLOGY
• Human-mechanical observation
Structured-Unstructured Observation
Structured Observation
How many of his customers visit the hotel with their families and how many come as single
customers.
Unstructured Observation
How single customers and those with families behave and their attitude
Disguised-Undisguised Observation
In disguised observation, the respondents do not know that they are being observed
In non-disguised observation, the respondents are well aware that they are being observed.
Direct-Indirect Observation
In direct observation, the actual behavior or phenomenon of interest is observed.
In in-direct observation, the results of the consequences of the phenomenon are observed.
Eg: Inorder to know the soft drinks consumption, he may like to observe empty bottles dropped
into the bin.
3.4 Survey Vs observation method
43
PPG INSTITUTE OF TECHNOLOGY
Depth Interview
Delphi Technique
Focus Group
Projective Technique
Depth interview
Unstructured, direct interview is known as a depth interview. It is free from restrictions imposed
by a formal list of questions.
Eg: What did you mean by that statement? Why did you feel this way? What other reasons do you
have
Advantages
Limitations
o Longer duration
44
PPG INSTITUTE OF TECHNOLOGY
o Difficult to find the qualified and trained people for conducting depth interview
o No quantifiable data is obtained in the depth interviewing process
Delphi technique
This is a process where a group of experts in the field gather together. The group members are asked to
make individual judgments about a particular subject, these judgments are compiled and returned to the
group members, so that they can compare with those of others and revise, then reach conclusion after 5 to
6 rounds.
Projective techniques
In projective techniques, respondents are asked to interpret the behavior of users, rather than describe their
own behavior. In interpreting the behavior of others, respondents indirectly project their own motivation
and feelings into the situation.
The general categories of projective techniques are:
1. Word association test
2. Completion technique
3. TAT and
4. Cartoon test
Word Association Test
This is consists of presenting a series of stimulus words to the respondent.
For eg: What brand of detergent comes to your mind first, when I mention washing of an expensive cloth?
Completion techniques
Sentence Completion
Eg: Earnings of software professional
Story Completion: A situation is described to a respondent who is asked to complete the story based on
his opinion and attitude.
Thematic Apperception Test
TAT is a projective technique. It is used to measure the attitude and perception of the individual.
Some picture cards are shown to respondents. The respondent is required to tell the story by looking at
the picture. When the subjects start telling the story, the researcher notices the respondents’ expression,
pauses and emotions to draw the inference.
45
PPG INSTITUTE OF TECHNOLOGY
3.5 Sampling
A sample is a part of a target population, which is carefully selected to represent the population.
Sample Frame
Sampling frame is the list of elements from wh ich the sample is actually drawn. Actually, sampling frame
is nothing but the correct list of population.
Eg: Telephone directory, Product finder, Yellow pages
Distinction between Census and Sampling
Census refers to complete inclusion of all elements in the population. A sample is a sub-group of the
population
Sampling Process:
1. Define the population
2. Identify the sampling frame.
3. Specify the sampling unit
4. Selection of sampling method
5. Determination of sample size
6. Specify sampling plan
Define the population
Telephone Directory
Localities of a city using the municipal corporation listing
Any other list consisting of all sampling units.
46
PPG INSTITUTE OF TECHNOLOGY
Multi-stage sampling
Random Sampling
Simple random sample is a process in which every item of the population has an equal probability
of being chosen.
Lottery method:
We can now write down all the combination, put them in a box. Mix them and pull one at random.
47
PPG INSTITUTE OF TECHNOLOGY
Area Sampling
If clusters happen to be some geographic subdivisions, in that case cluster sampling is better known
as area sampling.
48
PPG INSTITUTE OF TECHNOLOGY
Eg: If someone wants to measure the sales of toffee in retail stores, one might choose a city locality and
then audit toffee sales in retail outlets in those localities
Non-Probability Sampling
Judgment Sampling
The investigator uses his discretion in selecting sample observations from the universe.
Eg: Test market cities are being selected, based on the judgment sampling, because these cities are viewed
as typical cities matching with certain demographical characteristics.
Sequential Sampling
This is a method in which the sample is formed on the basis of a series of successive decisions.
Eg: If the evidence is not conclusive after a small sample, more samples are required. If the position is
still inconclusive, still larger samples are taken.
Quota Sampling
Quota sampling is quite frequently used in marketing research. Suppose, 2,00,000 students are appearing
for a competitive examination. We need to select 1% of them based on quota sampling.
Category Quota
General merit` 1,000
Sport 600
NRI 100
SC/ST 300
Total 2000
In this method, the initial group of respondents is selected randomly. Subsequent respondents are being
selected based on the opinion or referrals provided by the initial respondents
49
PPG INSTITUTE OF TECHNOLOGY
Panel Samples
To give an example, suppose that one is interested in knowing the change in the consumption pattern of
households. A sample of households is drawn. These households are contacted to gather information on
the pattern of consumption. Subsequently, say after a period of six months, the same households are
approached once again and the necessary information on their consumption is collected.
Eg:2
Assume that a bank wants to contact the people belonging to a particular profession over phone to market
a home loan product. The sampling frame in this case is the telephone directory. Reasons may be People
might have migrated, Numbers have changed, Numbers may not be listed. Thus in this case, there will be
a sampling error
Data Error
This occurs during the data collection, analysis or interpretation. Respondents sometimes give
distorted answers unintentionally for questions which are difficult, or if the question is
exceptionally long and the respondent may not have answer.
50
PPG INSTITUTE OF TECHNOLOGY
UNIT - IV
4 INTRODUCTION
1. INTRODUCTION:
4.1 Editing:
Data editing is the activity aimed at detecting and correcting errors (logical inconsistencies) in data.
The customary first step in analysis is to edit the raw data. Editing detects errors and omissions,
corrects them when possible, and certifies that maximum data quality standards are achieved. Alternately,
recorded raw data is normally less than perfect and the first phase through which this data must pass is
editing. The editor’s purpose is to guarantee that data are:
1. Accurate
2. Consistent with the intent of the question and other information in the survey
3. Uniformly entered
4. Complete
5. Arranged to simplify coding and tabulation
52
PPG INSTITUTE OF TECHNOLOGY
1. FIELD EDITING
2. OFFICE EDITING
Field Editing:
The Field editing is a preliminary editing done to detect the glaring omissions and inaccuracies in
the data. It is useful to controlling the field force and removing misunderstanding.
For example:
If interviewers did not follow the correct patterns or if open ended responses reflect a lack of probing.
When poor interview is detected; supervisor may train the interviewer.
Office Editing:
It is another type of editing job of data collection performed by a centralized office staff to
perform. The researcher must set up a centralized office with all facilities for editing and coding purpose
by which coordination can be accomplished.
The office editing is done after the field editing. This implies a complete and thorough scrutiny of the
questionnaire. There should be expert editors in the office to evaluate and examine the completed returns
of the respondents.
53
PPG INSTITUTE OF TECHNOLOGY
“A systematic way in which to condense extensive data sets into smaller analyzable units
through the creation of categories and concepts derived from the data.”
“The process by which verbal data are converted into variables and categories of variables
using numbers, so that the data can be entered into computers for analysis.”
WHEN TO CODE?
When testing a hypothesis (deductive), categories and codes can be developed before data is
collected.
When generating a theory (inductive), categories and codes are generated after examining the
collected data.
o Content analysis
o How will the data be used?
DATA ENTRY
The process transforming data from a research project, such as answers to a survey questionnaire, to
computers is referred to as data entry. The process of entering data into a
computerized database or spreadsheet.
54
PPG INSTITUTE OF TECHNOLOGY
55
PPG INSTITUTE OF TECHNOLOGY
Only one variable (Eg: Blood types) Can calculate percentage (Eg. 30% have A blood group etc.)
4.3 Bivariate analysis is the simultaneous analysis of two variables (attributes). It explores the concept
of relationship between two variables, whether there exists an association and the strength of this
association, or whether there are differences between two variables and the significance of these
differences. There are three types of bivariate analysis.
56
PPG INSTITUTE OF TECHNOLOGY
ANOVA
• Tests with two or more categories only determines that there is a difference between groups, but doesn’t
tell which is different
• eg: Do CAT scores differ for low- middle- and high-income students?
The ANOVA test assesses whether the averages of more than two groups are statistically different from
each other. This analysis is appropriate for comparing the averages of a numerical variable for more than
two categories of a categorical variable.
• Many statistical techniques focus on just one or two variables. Multivariate analysis (MVA)
techniques allow more than two variables to be analysed at once.
• Imagine out of the five senses you only had sight. From your perspective you could see the world
but you would not be able to hear the sounds around you, smell, and taste or feel things. Your
understanding of the world would be more limited. Most of us use all of our senses to understand
the world around us i.e. not just one “measurement” but the combination of several senses working
together. In multivariate analysis we use the information from many sources simultaneously to get
a better picture of our surroundings.
• MANOVA
57
PPG INSTITUTE OF TECHNOLOGY
In this analysis, two or more groups are compared. IN the final analysis, we need to find out whether the
groups differ one from another.
1. Those who buy our brand and those who buy competitors’ brand.
2. Good salesman, poor salesman, medium salesman.
3. Those who go to Food world to buy and those who buy in a kirana shop.
4. Heavy user, medium user and light user of the product.
In purpose of Factor analysis is to group large set of variable factors into fewer factors. Each factor will
account for one or more component. Each factor a combination of many variables.
The MR Manager prepares a questionnaire to study the customer feedback. The researcher has identified
six variables or factors for this purpose. They are as follows:
58
PPG INSTITUTE OF TECHNOLOGY
For future analysis, while conducting a study to obtain customers’ opinion, three factors mentioned above
would be sufficient. One basic purpose of using factor analysis is to reduce the number of independent
variables in the study.
It is used:
Cluster analysis is a technique used for classifying objects into groups. This can be used to sort data (a
number of people, companies, cities, brands or any other objects) into homogeneous groups based on their
characteristics. The result of cluster analysis is a grouping of the data into groups called clusters. The
researcher can analyze the clusters for their characteristics and give the cluster, names based on these.
A housing finance corporation wants to identify and cluster the basic characteristics, lifestyles and mindset
of persons who would be availing housing loans. Clustering can be done based on parameters such as
interest rates, documentation, processing fee, number of installments. Etc.
Process
There are two ways in which Cluster Analysis can be carried out:
1. First, objects/respondents are segmented into a pre-decided number of clusters. In this case, a
method called non-hierarchical method can be used, which partitions data into the specified
number of clusters.
2. The second method is called the hierarchical method.
Process
59
PPG INSTITUTE OF TECHNOLOGY
Design attributes for a product are first identified. For a shirt manufacturer, these could be design such as
designer shirts vs. plain shirts, this price of Rs 400 versus Rs. 800. The outlets can have exclusive
distribution or mass distribution. All possible combinations of these attribute levels are then listed out.
Each design combination will be ranked by customers and used as input data for conjoint analysis. Then
the utility of the products relative to price can be measured.
There are three steps in conjoint analysis
It is a set of related statistical techniques often used in information visualization for exploring
similarities or dissimilarities in data. MDS is a special case of ordination. An MDS algorithm starts with
a matrix of item–item similarities, and then assigns a location to each item in N-dimensional space, where
N is specified a priori. For sufficiently small N, the resulting locations may be displayed in a graph or 3D
visualization.
Types
MDS algorithms fall into a taxonomy, depending on the meaning of the input matrix:
60
PPG INSTITUTE OF TECHNOLOGY
In contrast to metric MDS, non-metric MDS finds both a non-parametric monotonic relationship between
the dissimilarities in the item-item matrix and the Euclidean distances between items, and the location of
each item in the low-dimensional space. The relationship is typically found using isotonic regression.
Louis Guttman's smallest space analysis (SSA) is an example of a non-metric MDS procedure.
61
PPG INSTITUTE OF TECHNOLOGY
1. Open SPSS and import your data. You can import your data set from an Excel file or any other CSV
file. To import your data, click "Open Another Type of File" and choose the file you would like to
import. If you would like to enter new data, simply click "Type in Data". When you have chosen a
data source, click "Ok."
2. Step 2
Edit your raw data in the variable view. There are two views in SPSS, (1) data view and (2) variable
view. Click the "Variable View" tab located on the bottom of the application and edit your raw data.
Here you can edit categories the name of your variable, type of variable and measurement category.
It is important to properly edit your variables, as many statistical tests will rely upon properly
formatted data.
3. Step 3
Choose a statistical test. Once you have entered and formatted your data, you will be ready to run a
statistical test. The most common tests are found in the "Analyze" tab located across the top of the
application.
4. Step 4
Paste your syntax. Before completing a statistical test, you should always paste your syntax by
clicking "Paste" in the dialog box. This will copy your syntax into a separate file. If the application
crashes, or you need to run the same test again, you can use the syntax file to initiate a statistical test.
5. Step 5
View your output. Once your statistical test has been run, you can view the results in an output file
that will open in a separate window
Advantages of SPSS
SPSS is the statistical package most widely used by political scientists. There seem to be several
reasons why:
SPSS has been around since the late 1960s. Statistical Package for the Social Sciences,
Of the major packages, it seems to be the easiest to use for the most widely used statistical
techniques
One can use it with either a Windows point-and-click approach or through syntax (i.e., writing out
of SPSS commands
62
PPG INSTITUTE OF TECHNOLOGY
Many of the widely used social science data sets come with an easy method to translate them into
SPSS; this significantly reduces the preliminary work needed to explore new data.
Disadvantages of SPSS
There are also two important limitations that deserve mention at the outset:
SPSS users have less control over statistical output than, But, once a researcher wants greater
control over the equations or the output, she or he will need to either choose another package
or learn techniques for working around SPSS
Once a researcher begins wanting to significantly alter data sets, he or she will have to either
learn a new package or develop greater skills at manipulating SPSS.
Overall, SPSS is a good first statistical package for people wanting to perform quantitative research in
social science because it is easy to use and because it can be a good starting point to learn more advanced
statistical packages.
UNIT - V
5 INTRODUCTION
63
5.1 RESEARCH REPORT
PPG INSTITUTE OF TECHNOLOGY
1. INTRODUCTION:
Report writing is the final stage of the business research and it is concerned with making the
findings available to the readers with varied interests. It is important to understand as to how to write a
report. Your final report should be in accordance with the writing style used at your university. Whatever
style you adopt, the content of the research report never varies. The final report of a research exercise
takes a variety of forms.
A research report funded by an educational institution may be in the form of written document.
64
PPG INSTITUTE OF TECHNOLOGY
A research report may also take the form of an article in a professional journal.
The purpose of research is to search for knowledge. (It is just to analyze a particular
situation and finding out some solution, that solution/result will be finished in the form
of report.)
Reporting is the process through which a basis ground is prepared for the exchange of
ideas or thoughts.
Reporting helps the researcher to make specific recommendation for a course of action
over, the phenomena, he studied. This is what actually expected in case of any study.
1. Oral report
2. Written report
a) The Popular report
b) The report for the administration
c) The technical report
d) Formal report
ORAL REPORT
The oral reporting is that the oral presentation in meetings. For example: seminars, conferences,
symposia, etc. is mainly oral presentation.
WRITTEN PRESENTATION
When compare to oral report, the preparation and presentation of written is somewhat difficult
because in case of oral report the presenter can talk in their own style, but in case of written they should
be very careful about the alignment, meaning, words, language, etc.
65
PPG INSTITUTE OF TECHNOLOGY
Written reports themselves are different types. In the context of reporting to management of a company,
reports are classified as: external and internal reports; routine and special reports; and operating and
special reports.
A useful classification of research reports seems to be the one based on the audience, i.e., the people to
whom the reports is meant. On this basis, written reports can be categorized as follows:
Popular report: This is the report meant to be read by public in the developments taking place around
them. For example: a researcher has worked on denudation of forest and ecological balance (research on
forest i.e., about cause and effects of cutting and destroying trees in forest).the public in this context would
be interested in such facts as the extent of forests, denudation, impact of denudation on ecology and
specific sectors like agriculture.
The report for the administration: Many of the business reports are of this type. They may be submitted
to any level. Usually, Supervisors submit periodical reports about production, machinery maintenance,
overtime, etc. Similar reports are also submitted by the middle level managers to the top level management
The technical reports: A technical report is written by an expert to be read by another expert. In this
sense, a thesis is a technical report intended to be read by another researcher.
Formal report: A formal report is used to document the results of an experiment, a design, or to pass on
any type of information in a formal style. When writing a formal report it is important to ensure good
English use and to follow the correct format as like as follow:
Abstract or summary
Outline
Introduction
Discussion
66
PPG INSTITUTE OF TECHNOLOGY
Conclusion
Recommendations
appendix
Research report format: The following outline is the suggested format for writing the research report
1. Title page
2. Letter of authorization
3. Summary of findings
4. Table of content
List of tables
List of figures
5. Introduction
Background to the research problem
Objectives
Hypothesis
6. Methodology
7. Data collection
Sample and sampling method
8. Statistical or qualitative methods used for data analysis
9. Sample description
10. Findings
11. Limitations
12. Results, interpretation and conclusions.
13. Recommendation
14. Appendices
15. Bibliography
67
PPG INSTITUTE OF TECHNOLOGY
Problem definition
Research objectives
Background material
Methodology
Sampling design
Research design
Data collection
Data analysis
Limitation
Findings
Conclusions
Recommendations
Appendices
Bibliography
Index
Conclusion
Executive summary is a term used in business for a short document that summarizes a longer report,
in such a way that readers can rapidly become acquainted with a large body of material without having to
read it all.
Step 1: Plan to create a summary each time you write a business report exceeding four pages.
Write the summary after you write the main report, and make sure it is no more than 1/10 the length of
the main report.
Step 2: List the main points the summary will cover in the same order they appear in the main
report.
68
PPG INSTITUTE OF TECHNOLOGY
Step 3: write a simple declarative sentence for each of the main point
Step 5: Read the summary slowly and critically, making sure it conveys your purpose, message
and key recommendations. You want readers to be able to skim the summary without missing the point
of the main report.
Step 6: Check the errors of style, spelling, grammar and punctuation. Ask a fellow writer to
proofread and edit the document.
Step 7: Ask a nontechnical person- for example, your parents or your spouse – to read the
document. If it confuses or bores them, the summary probably will have the same effect on other
nontechnical readers.
5.5 CHAPTERISATION
Chapterisation means scanning of the entire report taken by the researcher. The subject of the
report is to be divided into different parts, arrange them in a systematic way and mention which aspects
of them in a systematic way and mention which aspects of the research will be studied in which chapter.
It should be planned that one chapter will seems to be a continuation of the previous one.
Introduction
Review of related literature
Design of the study
Analysis and interpretation of data
Main findings and recommendation
Summary
Writing a Report
69
PPG INSTITUTE OF TECHNOLOGY
During your studies you may be required to research a particular area and produce a report. For Instance
depending on your area of study you might be asked to write a report on the performance.
• Inform
• Record progress
Your lecturer or teacher will usually provide you with the following information
Audience Research is an important tool to study the characteristics of target audience for various
media including demographic and psycho-graphic details of the audience, their exposure to various media,
listening/viewing/reading habits, needs and tastes for various media contents and moreover, to estimate
the size of audience for various programmes and programme ratings.
Audience Research on the one hand provides programme feedback to programme produces to
prepare audience friendly programmes and on the others provides audience share for the various media
contents to advertisers and marketers which in turn , helps in fixing rates for the various programmes and
channels. Thus, this gives consumer insight to the stakeholders and works as eyes and ears for the media
organizations.
70
PPG INSTITUTE OF TECHNOLOGY
5.7 READABILITY
Readability is the ease in which text can be read and understood. Various factors to measure
readability have been used, such as "speed of perception," "perceptibility at a distance," "perceptibility in
peripheral vision," "visibility," "the reflex blink technique," "rate of work" (e.g., speed of reading), "eye
movements," and "fatigue in reading."
Readability is distinguished from legibility which is a measure of how easily individual letters or
characters can be distinguished from each other. Readability can determine the ease in which computer
program code can be read by humans, such as through embedded documentation.
COMPREHENSION
In general usage, and more specifically in reference to education and psychology, it has roughly the same
meaning as understanding. Reading comprehension measures the understanding of a passage of text.
Reading comprehension
It is defined as the level of understanding of a text. This understanding comes from the interaction
between the words that are written and how they trigger knowledge outside the text.
TONE IN WRITING: In written composition, tone is often defined as what the author (rather than the
reader) feels about the subject. (What the reader feels about it, by contrast, is referred to as the mood.)
Tone is also sometimes confused with voice, which can be explained as the author’s personality expressed
in writing. Tone is established when the author answers a few basic questions about the purpose of the
writing:
Tone depends on these and other questions. In expository, or informative, writing, tone should be
clear and concise, confident but courteous. The writing level should be sophisticated but not pretentious,
71
PPG INSTITUTE OF TECHNOLOGY
based on the reader’s familiarity with or expertise in the topic, and should carry an undertone of cordiality,
respect, and, especially in business writing, an engagement in cooperation and mutual benefit.
FINAL PROOFREADING
After finishing the documentation, one is ready to proofread the report and to prepare final
manuscript. Proofreading is the process of checking work for errors in spelling, grammar, usage, level of
language, capitalization, punctuation, and documentation. Final editing of the report should be taken-up
after completing the writing of research report. This helps in identifying mistakes, if any, better and
correcting the mistakes.
Double check the spellings of proper names, such as the names of people and places.
Check to see that the quotations you have used fit grammatically into the sentences in which they
appear.
Check to see that your language is not too informal
Check all titles of works to make sure that these rules have been followed.
Check every sentence to make sure that it has an end mark. If the sentence ends with a parenthetical
citation, make sure that the citations appears before the end mark. In the case of a long, indented
quotation , the citation should follow the end mark
Check every quotation in the body of the text to make sure that it begins and ends with quotation
mark.
Check to see that you have used points of ellipsis properly in edited quotations.
Make sure that every citation corresponds to an entry in the works cited list.
Make sure that quotation, summary, or paraphrase is followed by a parenthetical citation.
72
PPG INSTITUTE OF TECHNOLOGY
Although most people acquire their sense of right and wrong during childhood, moral development
occurs throughout life and human beings pass through different stages of growth as they mature. Ethical
norms are so ubiquitous that one might be tempted to regard them as simple commonsense.
The following is a rough and general summary of some ethical principles that various codes address*:
Honest: Strive for honesty in all scientific communications. Honestly report data, results, methods and
procedures, and publication status. Do not fabricate, falsify, or misrepresent data. Do not deceive
colleagues, granting agencies, or the public.
Objectivity: Strive to avoid bias in experimental design, data analysis, data interpretation, peer review,
personnel decisions, grant writing, expert testimony, and other aspects of research where objectivity is
expected or required. Avoid or minimize bias or self-deception. Disclose personal or financial interests
that may affect research.
Integrity: Keep your promises and agreements; act with sincerity; strive for consistency of thought and
action.
Carefulness: Avoid careless errors and negligence; carefully and critically examine your own work and
the work of your peers. Keep good records of research activities, such as data collection, research design,
and correspondence with agencies or journals.
Openness: Share data, results, ideas, tools, resources. Be open to criticism and new ideas.
Respect for Intellectual Property: Honor patents, copyrights, and other forms of intellectual property.
Do not use unpublished data, methods, or results without permission. Give credit where credit is due. Give
proper acknowledgement or credit for all contributions to research.
Confidentiality: Protect confidential communications, such as papers or grants submitted for publication,
personnel records, trade or military secrets, and patient records.
Responsible Publication: Publish in order to advance research and scholarship, not to advance just your
own career. Avoid wasteful and duplicative publication.
73
PPG INSTITUTE OF TECHNOLOGY
Competence: Maintain and improve your own professional competence and expertise through lifelong
education and learning; take steps to promote competence in science as a whole.
Legality: Know and obey relevant laws and institutional and governmental policies.
Human Subjects Protection: When conducting research on human subjects, minimize harms and risks
and maximize benefits; respect human dignity, privacy, and autonomy; take special precautions with
vulnerable populations; and strive to distribute the benefits and burdens of research fairly.
SUBJECTIVITY refers to that the results are researcher -dependent. Different researchers
may reach different conclusions based on same interview. In contrast, when a survey respondent provides
a commitment score on a quantitative scale, it is thought to be more objective because the number will be
the same no matter what researcher is involved in the analysis.
Subjectivity guides everything from the choice of topic that one studies, to formulating hypotheses, to
selecting methodologies, and interpreting data.
Objectivity is the first condition of research. It means willingness and ability to examine
the evidence dispassionately. In other words, objectivity, means basing conclusion on facts without any
bias judgment. This difficulty arises out of the adverse influences of:
74