Está en la página 1de 101

Release Note

Version

v9.1724.25

Document

v9.1724.20
v9.1724.18

v9.1724.17

v9.1724.16
v9.1724.14

v9.1724.12
v9.1724.11
v9.1724.5

v9.1724.0
v9.1720.0
v9.1716.0

v9.1712.2
v9.1708.4

v9.1604.20

v9.1604.18
v9.1604.13

v9.1604.12

v9.1604.11
v9.1604.10

v9.1604.2
v9.1548.0

v9.1536.1
v9.1536.0
v8.1520.1
v8.1516.0

v8.1512.0
v7.1504.0

v7.1452.0

v7.1448.0
v7.1444.0

v7.1440.2

v7.1436.1

v7.1432.0
v7.1428.1

v7.1424.5

v7.1420.1
v7.1416.2

v7.1412.1
v7.1408.1

v7.1404.0

v6.1352.2
v6.1348.0

v6.1344.2

v6.1344.1
v6.1340.0

v6.1336.1

v6.1332.1
v6.1328.1

v6.1324.1
v6.1320.1

v6.1316.1
v6.1312.0

v6.1308.0
v6.1304.0
v6.1252.0
v6.1248.0
v6.1244.1

v6.1240.0
v6.1236.0

v6.1232.0

v6.1228.0
v6.1224.0

v6.1220.0

v6.1216.0
v6.1212.0

v6.1208.4
v6.1204.0

v6.1152.0

v6.1148.0
v6.1144.0

v6.1140.0
v6.1136.0

v6.1132.0
v6.1128.0

v6.1124.0

v6.1120.0

v6.1116.0
v6.1112.0

v6.1108.0

v6.1104.0

v6.1052.0

v6.1051.0
v6.1048.0

6.1044.0

6.1032.0

6.1028.0

6.1024.0
6.1020.0

6.1016.4

6.1016.3

6.1016.2
6.1016.0

6.1012.0

6.1004.0

6.0952.0
6.0948.0

6.0944.0

6.0940.0
6.0932.0

5.0924.0

5.0920.0
5.0916.0

5.0912.0

5.0908.0
5.0904.0

5.0852.0

5.0848.1
5.0848.0

5.0844.0

5.0836.1
5.0836.0

5.0828.1

5.0828.0
5.0820.0

5.0816.0
5.0808.0

5.0752.0
Description

Summary:
• For General/91/91/92/93 smart phone users, we strongly recommend that you upgrade as soon as possible.

New features:
Gen93
1. Support C2K DPD PA factory calibration and update parameter.
2. Support C2K NSFT list mode RXD RSSI & FER test.
- You can enable/disable list mode RXD test by the following cfg setting
- C2K NSFT Common Settings: DRX RSSI Test=Y //Y: enable, N: disable
3. Support GSM RXD calibration, NSFT, RF tool and update parameter

Enhancements:
N/A

Bug fixes:
General
1. Fixed update parameter C2K AFC item enable/disable feature when MMRF AFC is available
2. Fixed the structure of META_Connect_EX_Req for C Compiler which caused memory size issue

Gen90
1. Removed the middle UARFCN check when arranging RX path loss frequency stepped in FHC

Gen91
1. Fixed the problem of frequence range checking when you enabled the CA feature in the LTE RF tool RX page
2. Removed the middle UARFCN check when arranging RX path loss frequency stepped in FHC

Gen92
1. Removed the middle UARFCN check when arranging RX path loss frequency stepped in FHC

API Add/Remove:
N/A

Details:
N/A

Summary:
• For General smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

Enhancements:
N/A

Bug fixes:
1. Fixed memory dump related issues.
2. Fixed the memory issue of META_Connect_Ex_Req. Changed the new member,
META_COMM_TRACE_PARA_T, from middle position to the last position.

Details:
N/A
Summary:
• For M21 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

Enhancements:
[M21]
1. Support LTE/WCDMA DPD

Bug fixes:
1. Avoid Gen91 ca config commnad overflow
2. Added version info of MT8870 LTE TRX LM Waveform
3. Fixed CMW500 wrong and useless array arrangement for FHC and NSFT-LM
4. Changed CMW TDS LM CLPC RX Power to -105
5. Fixed CMW 2G DTS FHC array index problem
6. Fixed Gen90 C2K update parameter TPC profile PA gain frequency compensation value error when loaded
from files and saved to files
7. Fix Gen93 C2K update parameter upload self calibration data modem crash when after reconnected phone
8. Changed Gen93 C2K NSFT list mode TX power occupied frames from 2 to 5
9. Fixed Gen93 WCDMA DPCH TX fix gain start test assert issue

Details:
N/A

Summary:
• For M30 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

Enhancements:
N/A

Bug fixes:
[M30]
1. Fixed the issue that WCDMA DPD calibrated with error band adter one iteration

Details:
N/A

Summary:
• For M21 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

Enhancements:
N/A

Bug fixes:
[M21]
1. Fixed GSM/TDSCDMA RF tool RX path loss no show issue

Details:
N/A
Summary:
• For General/M21 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

Enhancements:
[General]
1. Updated SP_BROM for Zion security test

Bug fixes:
[General]
1. Fixed CMW GGE NSFT Pcl to Enpower mapping
2. Fixed MT8820 Bugs
- GSM FHC Tx Rx Steps
- LTE NSFT Cableloss
- TDSCDMA NSFT
- C2K FHC
- C2K AFC

[M21]
1. Fixed unexpected drop call issue
- Updated GSM DCXO LPM data.
2. Fixed CMW500 FHC bug for Tx Rx mismatch
3. Fixed MT8870 FHC bug for Tx Rx mismatch

Details:
N/A

Summary:
• For General/M21 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

New features:
[General]
1. Support MT8870 LTE traditional NSFT

Bug fixes:
[General]
1. Fix C2K NSFT list mode fail when retry run
[M21]
1. Fix AFC DAC value for GPS co-clock calibration

Details:
N/A
META_3Grf_NSFT_Start
META_3Grf_NSFT_Start_r
META_3Grf_NSFT_GetBitCountForSingleEndedBER
META_3Grf_NSFT_GetBitCountForSingleEndedBER_r
META_3Grf_NSFT_SetILPCStep
META_3Grf_NSFT_SetILPCStep_r
META_3Grf_NSFT_StartEx
META_3Grf_NSFT_StartEx_r
META_3Grf_HsdpaNsftStart
META_3Grf_HsdpaNsftStart_
META_3Grf_HsupaNsftStart
META_3Grf_HsupaNsftStart_r
META_3Grf_NSFT_List_Mode_Start
META_3Grf_NSFT_List_Mode_Start_r
META_3Grf_FHC_StartEx_r
META_3Grf_QueryFHCExResult
META_3Grf_QueryFHCExResult_r
META_3Grf_QueryCurrentLnaMode
META_3Grf_QueryCurrentLnaMode_r
META_3Grf_FHC_ELNA
META_3Grf_FHC_ELNA_r
META_3Grf_ELNA_Rssi
META_3Grf_ELNA_Rssi_r
META_3Grf_ELNA_ContinuousRssi
META_3Grf_ELNA_ContinuousRssi_r
META_3Grf_Set_Initial_Cellpower
META_3Grf_Set_Initial_Cellpower_r
META_3Grf_QueryCurrentRxDLnaMode
META_3Grf_QueryCurrentRxDLnaMode_r
META_3Grf_SetCapId(unsigned int ms_timeout, unsigned int capId);
META_3Grf_SetCapId_r
META_3Grf_GetMaxCapId
META_3Grf_GetMaxCapId_r
META_3Grf_AFC_Ex
META_3Grf_AFC_Ex_r
META_3Grf_SetRxBandwidth
META_3Grf_SetRxBandwidth_r
META_3Grf_SetRxAntenna
META_3Grf_SetRxAntenna_r
META_3Grf_SetTxPaDriftCompEnable
META_3Grf_SetTxPaDriftCompEnable_r
META_3Grf_GetRfTemperature
META_3Grf_QueryFHCExResult
META_3Grf_QueryFHCExResult_r
META_3Grf_QueryCurrentLnaMode
META_3Grf_QueryCurrentLnaMode_r
META_3Grf_FHC_ELNA
META_3Grf_FHC_ELNA_r
META_3Grf_ELNA_Rssi
META_3Grf_ELNA_Rssi_r
META_3Grf_ELNA_ContinuousRssi
META_3Grf_ELNA_ContinuousRssi_r
META_3Grf_Set_Initial_Cellpower
META_3Grf_Set_Initial_Cellpower_r
META_3Grf_QueryCurrentRxDLnaMode
META_3Grf_QueryCurrentRxDLnaMode_r
META_3Grf_SetCapId(unsigned int ms_timeout, unsigned int capId);
META_3Grf_SetCapId_r
META_3Grf_GetMaxCapId
META_3Grf_GetMaxCapId_r
META_3Grf_AFC_Ex
META_3Grf_AFC_Ex_r
META_3Grf_SetRxBandwidth
META_3Grf_SetRxBandwidth_r
META_3Grf_SetRxAntenna
META_3Grf_SetRxAntenna_r
META_3Grf_SetTxPaDriftCompEnable
META_3Grf_SetTxPaDriftCompEnable_r
META_3Grf_GetRfTemperature
META_3Grf_GetRfTemperature_r
META_3Grf_GetRfCapability
META_3Grf_GetRfCapability_r
META_3Grf_SetMIPICodeWord
META_3Grf_SetMIPICodeWord_r
META_3Grf_GetMIPICodeWord
META_3Grf_GetMIPICodeWord_r
META_3Grf_GetTemperatureInfo
META_3Grf_GetTemperatureInfo_r
META_3Grf_RxGainSweep
META_3Grf_RxGainSweep_r
META_3Grf_UbinModeSetup
META_3Grf_UbinModeSetup_r
META_3Grf_GetRfChipIdName

Summary:
• For General/ Gen91/Gen92 smart phone users, we strongly recommend that you upgrade as soon as
possible.

API Add/Remove:
N/A

Bug fixes:
[General]
• Fixed hang problem of META console mode when downloading the calibration data.
[Gen91]
• Enhanced CMW TDSCDMA NSFT Max Power from Carrier Power to UE Power.
• Fixed the problem that NVRAM Editor data is empty in some of the cases.
[Gen92]
• Enhanced CMW TDSCDMA NSFT Max Power from Carrier Power to UE Power.
• Fixed the problem that NVRAM Editor data is empty in some of the cases.

Details:
N/A
Summary:
• For General/Gen92 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
N/A

Bug fixes:
[Gen92]
1. Fixed WCDMA A/B gain traditional calibration issue.
New features/Enhancements:
[General]
1. Updated Parameter supports 2/3/4G RF RAT indicator.
• User manual: http://teams.mediatek.inc/WCT/SE2_ST/Global%20Tools%20Group%20Projects/META/META
%20tool%20document%20library/%5bHow%20To%5dUpdate%20Calibration%20Data%20Via%20META
%20tool(New_UpdateparameterPage_Usage).pptx
• Green light : support
• Grey light: no support
• Red light: an error occurred
2. Updated Parameter supports runtime execution status.
• User manual: http://teams.mediatek.inc/WCT/SE2_ST/Global%20Tools%20Group%20Projects/META/META
%20tool%20document%20library/%5bHow%20To%5dUpdate%20Calibration%20Data%20Via%20META
%20tool(New_UpdateparameterPage_Usage).pptx
• Ex: General Case:
• Ex: After finishing all operation, it will pop up error message box if there is any error.
3. Updated Parameter begins to support C2K Item.
• To download C2K MEID from *.cal(or *.ini) file, please add the following section into *.cal file manually.
[C2K MEID]
MEID=1234567890ABCD
4. Support C2K DRX without RX second path calibration.

Details:
N/A
Summary:
Notice: We will not provide the share library and META tool GUI source code with release package from
this version. If still needed, please contact with us.
• For General/Gen92 smart phone users, we strongly recommend that you upgrade as soon as possible.

API Add/Remove:
Notice : Add new “V3” APIs, these APIs are pre-release for new platform, and that was not final version.

[General]
New features:
N/A
Enhancement:
1. META Speeds up the file read and write operation in the Updateparameter.
2. Support non-English file path name in the Updateparameter.
Bug fixes:
1. Fixed the Updateparameter random crash problem.
Details:
N/A

[Gen92]
New features:
N/A
Enhancement:
N/A
Bug fixes:
1. Fixed WCMDA PGA A/B gain calculation.
2. Fixed the unexpected failure in GSM calibration when GSM band was partially calibrated.
3. Fixed WCDMA RF tool MIPI control download to flash failed & incorrect issue.
Details:
N/A

Summary:
Notice: We will not provide the share library and META tool GUI source code with release package from
this version. If still needed, please contact with us.
• For Gen91 smart phone user, it’s recommended to update META tool to this version to :
1. Correct WCDMA low power mode rx pathloss calculation formula.
Bug fixes:
• Correct WCDMA low power mode rx pathloss calculation formula.
a. The original low power mode pathloss offset is wrong due to the formula will consider about the initial ini
value.
API Add/Remove:
Notice : Add new “V3” APIs, these APIs are pre-release for new platform, and that was not final version.
New features:
N/A
Enhancement:
N/A
Details:
N/A
Summary:
• For New Generation MT6292 smart phone user, it’s mandatory to update META tool to this version to :
1. Support LTE calibration/NSFT test flow.
2. Support LTE ET Lab Tuning.
3. Support WCDMA DPD Calibration.
• For All Platform smart phone user, it’s mandatory to update META tool to this version to :
1. New setting format for factory mode cable loss.
2. New UI of Meta Update Parameter.
Bug fixes:
N/A
API Add/Remove:
• Please refer to the release note word file.
New features:
• LTE V2 FHC and NSFT V2 support.
• LTE ET calibration and lab tuning support.
• WCDMA DPD calibration support.
• New setting format for factory mode cable loss.
- please refer to the file on left column for new cable loss introduction.
• New UI of Meta Update Parameter

Summary:
• For General smart phone user, it’s recommended to update META tool to this version to :
1. Fix calibration/NFST report file(.csv) disorder issue.
Bug fixes:
• Fix calibration/NFST report file(.csv) disorder issue.
• Fix LTE NSFT modem exception issue when band number over than 10.
API Add/Remove:
N/A
New features:
• TDSCDMA eLNA calibration flow support.
Enhancement:
N/A
Details:
N/A  

Summary:
• For General smart phone user, it’s recommended to update META tool to this version to :
1. Separate each handle log by handle.
Bug fixes:
• Fix self calibration random exception issue due to use un-initial buffer.
API Add/Remove:
N/A
New features:
• Separate each handle log by handle.
Enhancement:
N/A
Details:
N/A  
Summary:
• For General smart phone user, it’s recommended to update META tool to this version to :
1. Support multi-thread calibration with Multi-ATE tool.
Bug fixes:
• Fix the factory mode page NVRAM database read failure issue. User may encounter read database failure
situation while NVRAM path exists in factory mode’s field.
API Add/Remove:
N/A
New features:
• Support multi-thread calibration with Multi-ATE tool
Enhancement:
N/A
Details:
N/A  

Summary:
• For General smart phone user, it’s recommended to update META tool to this version to :
1. Support External LNA calibration flow. (Include 2G/WCDMA/LTE)
Bug fixes:
• Fix the return value when the test procedure loaded WCDMA list mode waveform failure.
API Add/Remove:
N/A
New features:
N/A
Enhancement:
N/A
Details:
N/A  

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. LTE NSFT error message enhancement.
Bug fixes:
• Fix WCDMA list mode timeout issue. When the number of test cases over 15, user may encounter command
always timeout situation.
• Fix 2G w-coefficient calibration flow retry issue.
API Add/Remove:
N/A
New features:
N/A
Enhancement:
• LTE NSFT error message enhancement. Users can find out the root cause by error message which reported
from DUT.
Details:
N/A  
Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Support multi-port calibration/NSFT.
Bug fixes:
• Fix EXT LTE CA calibration cell power arrangement step. Or the stack might be overflowed due to step index =
-1.
• Fix WCDMA report pwr_det_value type (unsigned short to short).
API Add/Remove:
• LTE APIs removed
o META_ERf_SetEtMode / META_ERf_SetEtMode_r
o META_ERf_StartEtCal / META_ERf_StartEtCal_r
o META_ERf_GetEtCalSetting / META_ERf_GetEtCalSetting_r
o META_ERf_SetEtCalSetting / META_ERf_SetEtCalSetting_r
o META_ERf_SetToolUsage / META_ERf_SetToolUsage_r
o META_ERf_GetEtPathDelayCheckResult / META_ERf_GetEtPathDelayCheckResult_r
o META_ERf_StartEtPathDelaySearch / META_ERf_StartEtPathDelaySearch_r
New features:
• Support multi-port calibration/NSFT.
Enhancement:
N/A
Details:
N/A

1. Extend test steps for GGE TX subband calibration to 100 steps.


• For WCDMA users, it’s recommended to update new version META tool.
1. Support new WCDMA prf selection method.
• For 3G TDD tool users, it’s recommended to update new version META tool.
1. Modify 3G TDD RF tool DPCH/RSSI default value.
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Support band number of LTE FHC calibration over 10.
2. Fix LTE-TDD or LTE-FDD only self calibration execution failure issue.
3. Solve LTE NSFT EVM failure issue.
• For DPD users, it’s recommended to update new version META tool.
1. Support path delay
2. Support update path delay parameter in UpdateParameter
• For ET users, it’s recommended to update new version META tool.
1. Support LTE ET calibration flow.
2. Support LTE RF tool and Update Parameter ET setting flow
Bug fixes:
• Fix LTE NSFT EVM failure issue.
• Fix L1 command timeout randomly problem during RF tool initialization stage.
• Fix loading Nvram’s database of C2K failed with console mode.
• Fix display UI with console mode.
• Fix connect to C2K failed issue of C2K projects, Jade, Everest, Jade minus and Denali.
• Fix backup NVRAM file to BackupPartition failure of C2K project.
API Add/Remove:
• WCDMA
o META_3Grf_QueryNsftRssi / META_3Grf_QueryNsftRssi_r
o META_3Grf_NSFT_Reset_BER_Result / META_3Grf_NSFT_Reset_BER_Result_r
• MMRF
o META_MMRf_EtModeSetting / META_MMRf_EtModeSetting_r
o META_MMRf_SetToolUsage / META_MMRf_SetToolUsage_r
o META_MMRf_StartEtCal / META_MMRf_StartEtCal_r
o META_MMRf_GetEtCalSetting / META_MMRf_GetEtCalSetting_r
o META_MMRf_SetEtCalSetting / META_MMRf_SetEtCalSetting_r
o META_MMRf_GetEtPathDelayCheckResult / META_MMRf_GetEtPathDelayCheckResult_r
o META_MMRf_StartEtPathDelaySearch / META_MMRf_StartEtPathDelaySearch_r
New features:
• Support LTE ET calibration.
• EXT/EXM LTE TDD 10Mhz NSFT support.
• Support new WCDMA prf selection method.
• Support loading Nvram’s database from Target side if smart phone support this function.
Enhancement:
• Support LTE DPD calibration with path delay.
Details:
Summary:
• For General platform users, it’s recommended to update update META tool to this version to :
1. Extend test steps for GGE TX subband calibration to 100 steps.
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Support LTE rx bypass NCCA path loss check function
2. Support LTE HRM/filter mode NSFT.
3. Support LTE RF tool HRM/filter mode
Bug fixes:
• Fix non-ansi file path led Meta tool thread error.
• Fix show blank message when version of Nvram’s database doesn’t match version of sw
API Add/Remove:
• LTE
o META_ERf_Start_TxNsftWithSignalPath / META_ERf_Start_TxNsftWithSignalPath_r
o META_ERf_ForceTasSwitch / META_ERf_ForceTasSwitch_r
• MMRF
o META_MMRf_StartDpdPaProfileFacCal / META_MMRf_StartDpdPaProfileFacCal_r
o META_MMRf_GetDpdPaProfileFacCalParam / META_MMRf_GetDpdPaProfileFacCalParam_r
o META_MMRf_SetDpdPaProfileFacCalParam / META_MMRf_SetDpdPaProfileFacCalParam_r
o META_MMRf_ForceTasSwitch / META_MMRf_ForceTasSwitch_r
New features:
• Support LTE HRM/filter mode NSFT.
• Support LTE RF tool HRM/filter mode
• Support new options for connection type, smart phone, feature phone, dongle, MT6280 RNDDIS dongle/WIFI
router, dummy AP, modem only.
• Support keeping user’s connection setting.
Enhancement:
• Support LTE rx bypass NCCA path loss check function. The path loss of NCCA which need to be bypassed will
be set as zero.
• Extend test steps for GGE TX subband calibration to 100 steps.
Details:
N/A 

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Fix LTE low power mode offset calculation problem.
2. Support LTE filter mode FHC
3. Support DPD and CIM3 in Multi-Mode Tuning Tool
Bug fixes:
• WCDMA & LTE low power mode offset calculation bug fix. Calibration data for low power mode should be a
offset with normal mode pathloss.
• Get WCDMA band by UARFCN problem (for band6)
• LTE Band 30-32 frequency range definition.
• Fix bug about LTE RX only band (29,32) cannot be executed.
API Add/Remove:
1. LTE
a. META_ERf_GetFilterModeTpcSetting/ META_ERf_GetFilterModeTpcSetting_r
b. META_ERf_SetFilterModeTpcSetting/ META_ERf_SetFilterModeTpcSetting_r
c. META_ERf_SetHrmFlag/ META_ERf_SetHrmFlag_r
d. META_ERf_GetHrmTpcSetting/ META_ERf_GetHrmTpcSetting_r
e. META_ERf_SetHrmTpcSetting/ META_ERf_SetHrmTpcSetting_r
New features:
1. Support LTE filter mode FHC
2. EDGE subband PGA A/B gain calibration. Use high/low PCL to calibration UE.
Enhancement:
1. GMSK subband TX dac check limit. default: 0 – 1023
2. Reset the barcode & calibration statis caption on Factory mode GUI when dut reconnect.
Details:
N/A 
b. META_GetTargetVerInfoEx2 / META_GetTargetVerInfoEx2_r
c. META_GetReadBytesEx / META_GetReadBytesEx_r
2. WCDMA
a. META_3Grf_Lpm_Rssi / META_3Grf_Lpm_Rssi_r
b. META_3Grf_Lpm_RxDRssi / META_3Grf_Lpm_RxDRssi_r
c. META_3Grf_Lpm_ContinuousRX / META_3Grf_Lpm_ContinuousRX_r
d. META_3Grf_SetRxPathLoss / META_3Grf_SetRxPathLoss_r
e. META_3Grf_GetRxPathLoss / META_3Grf_GetRxPathLoss_r
3. LTE
a. META_ERf_StartMixRx_CaMode / META_ERf_StartMixRx_CaMode_r
b. META_ERf_GetMixRxReport_CaMode / META_ERf_GetMixRxReport_CaMode_r
c. META_ERf_Rssi_CaMode / META_ERf_Rssi_CaMode_r
d. META_ERf_SetPathLossSettingEx / META_ERf_SetPathLossSettingEx_r
e. META_ERf_GetPathLossSettingEx / META_ERf_GetPathLossSettingEx_r
f. META_ERf_ContRx_CaMode / META_ERf_ContRx_CaMode_r
g. META_ERf_SetLnaSrx / META_ERf_SetLnaSrx_r
h. META_ERf_QueryCaConfigTable / META_ERf_QueryCaConfigTable_r
i. META_ERf_FHC_CaMode / META_ERf_FHC_CaMode_r
4. MMRF
a. META_MMRf_GetRfCapability / META_MMRf_GetRfCapability_r
b. META_MMRf_StartDpdFacCal / META_MMRf_StartDpdFacCal_r
c. META_MMRf_GetDpdFacCalParam / META_MMRf_GetDpdFacCalParam_r
d. META_MMRf_SetDpdFacCalParam / META_MMRf_SetDpdFacCalParam_r
e. META_MMRf_DpdEnable / META_MMRf_DpdEnable_r
f. META_MMRf_StartDpdPaGainFacCal / META_MMRf_StartDpdPaGainFacCal_r
g. META_MMRf_GetDpdPaGainFacCalParam / META_MMRf_GetDpdPaGainFacCalParam_r
h. META_MMRf_SetDpdPaGainFacCalParam / META_MMRf_SetDpdPaGainFacCalParam_r
i. META_MMRf_StartCim3FacCal / META_MMRf_StartCim3FacCal_r
j. META_MMRf_GetCim3FacCalParam / META_MMRf_GetCim3FacCalParam_r
k. META_MMRf_SetCim3FacCalParam / META_MMRf_SetCim3FacCalParam_r
l. META_MMRf_Cim3Enable / META_MMRf_Cim3Enable_r
m. META_MMRf_StartSelfCal / META_MMRf_StartSelfCal_r
n. META_MMRf_GetSelfCalData / META_MMRf_GetSelfCalData_r
o. META_MMRf_SetSelfCalData / META_MMRf_SetSelfCalData_r
p. META_MMRf_GetSelfCalDataLen / META_MMRf_GetSelfCalDataLen_r
q. META_MMRf_GetSelfCalDataString / META_MMRf_GetSelfCalDataString_r
r. META_MMRf_GetSelfCalDebugInfo / META_MMRf_GetSelfCalDebugInfo_r
s. META_MMRf_GetDpdCim3LUTConfig / META_MMRf_GetDpdCim3LUTConfig_r
New features:
1. RF self calibration (2G/WCDMA/TDSCDMA/LTE).
2. DPD/CIM3 support.
3. LTE carrier aggregation support.
Summary:
• For LWTG+C2K smart phone user, it’s recommended to update META tool to this version to :
1. Doesn’t support connect C2K modem by USB bypass mode again, only support connect C2K modem by
USB VCOM port in virtual channel.
2. Support C2K cable loss calibration.

Bug fixes:
1. Share library bug fix
a. Fix C2K and WCDMA FHC PA gain check fail error string.
b. Fix cable loss calibration status code.
c. Fix C2K APC tester presetting multi-thread error.
d. Fix TDD trigger issue for MT8870 LTE NSFT.
e. Fix SP6010 switch port fail.
f. Fix GSM list mode NSFT check result bug.
g. Fix WCDMA 2-port calibration SetPathLoss_RxD issue.

1. META tool bug fix


a. N/A.
API Add/Remove:
1. Add API in C2kAgent.dll.
N/A

New features:
N/A

Enhancement:
1. Support C2K cable loss calibration.
2. SP6010 support list mode.

Details:
N/A 
Summary:
• For LWTG+C2K smart phone user, it’s recommended to update META tool to this version to :
1. Support LTE NSFT TX test by SAW filter mode.
2. Support LWTG + C2K dual modem.
3. Support C2K RF tool, MEID download and C2K factory calibration.
Bug fixes:
1. Share library bug fix
a. Fix multi-thread run fail problem, for multi-thread programming, you must use this library.
b. Change C2K AFC TX power from PA high mode to PA low mode, to reduce the influence of temperature on
AFC.
c. Fix C2K DCXO AFC error status code description string.
d. Fix WCDMA RF tool TADC count parameter issue. User could input TADC count and target will calculate
correct TADC by it.
e. Fix WCDMA RF tool continuous RX mode parameter issue. User could select continuous RX mode and set it
to target.
f. Fix GPS co-clock calibration with multi-image target issue. User could calibrate GPS co-clock successfully
with multi-image target.
1. META tool bug fix
a. N/A.
API Add/Remove:
1. Add API in C2kAgent.dll.
a. a. META_C2K_ReadCurrentTemperature_r(not used now).

New features:
1. META TOOL add C2K TAS(Transmit Antenna Switch) NVRAM data upload/download function in "C2K RF
TOOL" => "RF Custom Data".
2. Support LTE NSFT TX test by SAW filter mode.
a. According to coexistence band bitmap which reported by UE, if test case contained coexistence band, UE
will be switched to SAW filter path before TX NSFT started.
b. How to use.
Add new key under LTE common section.
Ex.
[LTE Common]
; 0 -> bypass mode, 1-> SAW filter mode
CO_EXISTANCE_TEST_MODE = 1

Enhancement:
1. META TOOL add C2K MEID item operation in "update parameter" window.
Details:
N/A 

Summary:
• For LWTG+C2K smart phone user, it’s required to update META tool to this version to :
1. Support LWTG + C2K dual modem.
2. Support C2K RF tool, MEID download and C2K factory calibration.
Bug fixes:
1. Share library bug fix
a. N/A.
1. META tool bug fix
a. N/A.
API Add/Remove:
1. Add C2K APIs by C2kAgent.dll.
a. C2kAgent.dll call sub layer VCC2kAgent.dll for support TST virtual channel.

New features:
1. Share library add C2K calibration functions and C2K instrument support for Agilent 8960/EXT/EXM, CMW500,
IQXstream, MT8870 etc.
2. META tool add C2K RF tool, MEID download and C2K factory calibration features.
3. Support C2K USB bypass channel and TST virtual channel.

Enhancement:
N/A
Details:
N/A 
Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Fix EXT LTE wrong downlink frequency mapping.
Bug fixes:
1. Share library bug fix
a. EXT LTE Instrument - Fix wrong downlink frequency mapping in traditional LTE NSFT test. User may
encounter LTE traditional NSFT failure due to the wrong downlink frequency setting.
1. META tool bug fix
a. Fix TDSCDMA RF tool temperature issue. Get temperature from RF chip instead of BB chip.
API Add/Remove:
1. Add NVRAM operation API.
a. META_NVRAM_GetLIDEnumbyName
b. META_NVRAM_GetLIDEnumbyName_r
New features:
1. Support factory calibration GUI read only mode.
a. Lock all calibration items on factory GUI.
Enhancement:
1. Remove unnecessary calibration log to improve logging performance.
a. Remove the LTE cable loss debug logs to reduce file IO times.
Details:
N/A 

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Support LTE NSFT check power range by test case setting.
Bug fixes:
1. 2G list mode skip RX check flow in TX only case.
2. 2G List mode NSFT Avg RMS PErr item check skipped.
3. Fix TDSCDMA TADC get temperature fail when second time TADC calibration flow.
4. Fix TDSCDMA RF tool get TADC value from RF chip instead of baseband.
API Add/Remove:
N/A
New features:
N/A
Enhancement:
N/A
Details:
N/A 

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Support LTE NSFT check power range by band setting.
2. Support configurable RX path LTE NSFT.
3. Support LTE RF PUSCH TX Carrier Search in meta tool.
Bug fixes:
1. Fix the LTE FHC EXT command to avoid error message.
2. Fix 2G NSFT result check function be skipped issue.
API Add/Remove:
N/A
New features:
1. Support LTE RF PUSCH TX Carrier Search in meta tool.
a. DL frequency/Enable Carrier Search will be visible when RF capability [enable_csr] turns on.
Enhancement:
N/A
Details:
N/A 
Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. LTE calibration data download check.
2. Add LTE FHC calibration result output report.
3. LTE 2 port calibration support (Traditional calibration).
Bug fixes:
1. Fix read WCDMA PA drift compensation bug.
New features:
1. Set modem log filter to target support.
Enhancement:
N/A
Details:
N/A

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Support LTE ET calibration.
2. Support external temperature sensor.
Bug fixes:
1. Add WCDMA get capability check to avoid set wrong parameter to dut during calibration.
New features:
2. Support external temperature sensor.
3. Support LTE ET calibration.
Enhancement:
N/A
Details:
N/A

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Fix inaccuracy LTE cable loss setting when TX/RX in different antenna port.
Bug fixes:
1. Fix EXT wrong band index. User may encounter take wrong cable loss when LTE FHC calibration.
2. Fix LTE TADC calibration flag has been skipped issue.
New features:
N/A
Enhancement:
N/A
Details:
N/A

Summary:
• Start to support LTE multi port cable loss setting and cable loss calibration.
• For K2 (MT6752) users, it’s mandatory to update META tool to this version
1. Support LTE multi port cable loss calibration functions.
Bug fixes:
1. Fix wrong AFC slope calculation on LTE RF tool.
2. Fix LTE phase error fetch wrong field issue.
New features:
N/A
Enhancement:
N/A
Details:
N/A
Summary:
• Start to support K2 (MT6752) calibration.
• For general platform users, it’s recommended to update META tool to this version to fix:
1. Fine tune stack size (1M --> 16M) to avoid DLL stack overflow.
• For LTE smart phone user, it’s recommended to update META tool to this version to fix:
1. LTE NSFT phase error issue.
Bug fixes:
1. Fix backup/restore NVRAM crashed issue
2. Fix WCDMA RXD 2 port cal flow will be executed in LTG’s modem sw.
3. Resolve GSM APC variable initialization issue.
4. Fix skip value check when skip RXD flag is on.
New features:
N/A
Enhancement:
N/A
Details:
N/A

Summary:
• For LTE smart phone user, it’s recommended to update META tool to this version to fix:
1. MT8820 traditional NSFT support.(Not list mode).
Bug fixes:
1. Fix ROME DSDA external MODEM shutdown issue.
2. Fix DSDA external modem one station calibration unexpected stop issue.
3. Fix LTE calibration log buffer overflow caused META crash issue.
4. Fix backup/restore NVRAM crashed issue.
5. Fix skip value check when skip RXD flag is on.
New features:
N/A
Enhancement:
N/A
Details:
N/A

Summary:
• GGE NSFT Rx level tolerance check.
• For LTE smart phone user, it’s recommended to update META tool to this version to fix:
1. LTE H/M/L cable loss support.
2. Modify LTE temperature coefficients pa gain selection method.
Bug fixes:
1. GGE FHC Rx sync failure issue while measurement step = 50.
2. TDSCDMA CLPC RF Tool GUI display issue.
3. Fix feature phone connection causes META tool access violation.
New features:
1. Add LTE RF tool temperature coefficients page.
Enhancement:
N/A
Details:
N/A

Summary:
• Dynamic computing LTE cable loss by frequency in LTE calibration flow.
• LTE cable loss calibration.
• For general platform users, it’s recommended to update META tool to this version to fix:
1. WCDMA FHC fetch result fail issue.
• For LTE smart phone user, it’s recommended to update META tool to this version to fix:
1. LTE NSFT BER test failure issue.
2. LTE TX FHC failure when subband count is more than 15.
Bug fixes:
1. Throw exception while WCDMA FHC query result over 50 times.
2. Fix LTE NSFT BER test while loop condition no effect.
3. Fix LTE FHC TX fill dummy step to align TRX same frequency number (when subband > 15) issue.
4. Fix GSM RX FHC failure due to the arranged steps for calibration exceeds the maximum of Agilent 8960.
New features:
1. Support MT6595 security chip.
Enhancement:
N/A
Details:
N/A

Summary:
• Supprot MT6261 connection/calibration.
• New feature for TDSCDMA CLPC FHC calibration flow.
• For general platform users, it’s recommended to update META tool to this version to fix:
1. WCDM AGC RXD calibration write NVRAM fail issue.
2. GSM tx subband low weighting calibration fail issue.
3. MT6261 RF chip id display issue.
4. Fix update parameter check RF chip ID consistency.
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Fix LTE re-calibration issue in world phone 1-station RF calibration flow.
• For worldphone platform users, it’s recommended to update META tool to this version to fix:
1. Fix multiple software switch support for META GUI main form.
Bug fixes:
1. Fix TDSCDMA RF tool display issue. User may encounter GUI operating problem.
2. Fix update parameter issue about TDSCDMA CLPC calibration data can’t be loaded from update parameter
tool. User may encounter the CLPC calibration data erased after importing .cal file.
3. Fix 1 modem 1 sw re-calibration issue.
4. Fix 2G crystal AFC dynamic range erroneous judgment.
New features:
1. MT6261 connection/calibration
2. TDSCDMA CLPC FHC calibration flow
3. Audio compensation headset tuning
Enhancement:
N/A
Summary:
• New feature for TDSCDMA CLPC rf tool and calibration flow(TC/FHC).
• For general platform users, it’s recommended to update META tool to this version to fix:
1. Fix GSM AGC band combine with reduce LNA mode capability will skip AGC calibration flow issue
• For LTE smart phone user, it’s recommended to update META tool to this version to :
1. Add LTE temperature compensation flow for AGC/APC calibration
Bug fixes:
1. Fix GSM AGC band combine with reduce LNA mode capability will skip AGC calibration flow issue.
2. Fix 2G FHC tx subband calibration overflow crashed issue.
3. Fix LTE re-calibration issue in world phone 1-station RF calibration flow.
4. Fix LTE TPC temp compensation flow.
5. Fix GSM subband low weighting calibration fail issue.
New features:
1. TDSCDMA CLPC RF tool and traditional calibration flow.
Enhancement:
1. Add temperature compensation flow in 2G APC/3G AGC/4G AGC/4G APC calibration

Summary:
• Start to support LTE smart phone
• For general platform users, it’s recommended to update META tool to this version to fix:
1. Fixed write file to FAT failed in FAT Editor
Bug fixes:
1. Fixed write file to FAT failed in FAT Editor.
2. Fixed LTE AFC group box visible issue. User may not see AFC related option in factory mode calibration form.
3. Fixed GSM NSFT Tx check result issue. User may see the wrong NSFT result in log.
4. Fixed EPSK data download to NVRAM fail issue. Use may encounter GUI hanged problem when download
data to NVRAM.
5. Fixed 8960 instrument BER test hanged problem. User may encounter instrument no response problem when
BER testing.
New features:
1. Support LTE/WCDMA MIPI PA control profile.
Enhancement:
N/A

Summary:
• For MT6571 platform users, it’s mandatory to update META tool to this version to fix:
a. Write NVRAM data no response issue.
• For general platform users, it’s recommended to update META tool to this version to fix:
1. Share library unsupported Chinese path of INI/CFG file issue.
2. Multi-language file path of NVRAM database load fail on WIN7 issue.
3. META connection issue on WIN7
Bug fixes:
1. Fixed share library unsupported Chinese path of INI/CFG file issue. Users may encounter the initial values
incorrect in NVRAM and calibration flow is not expected.
2. Fixed multi-language file path of NVRAM database load fail on WIN7 issue. Users will encounter NVRAM
database loaded fail on WIN7 platform.
3. Fix META connection issue on some PCs using WIN7.
4. Fix MT6571 target no response problem when downloading RF data into NVRAM.
5. Fix instrument hang on BER test with Agilent8960 issue. User may encounter META tool GUI no response
when stress test.
6. Fix NVRAM lock down and reset to factory default error.
New features:
N/A
Enhancement:
N/A
Summary:
1. Start to support MT6571.
2. For MT6572/MT6582/MT6592 GPS Co-Clock platform users, it’s mandatory to update META tool to this version
to fix GPS Co-Clock stored incorrect C0 & C1 value into AP NVRAM issue.
3. For WCDMA platform users, it’s mandatory to update META tool to this version to fix WCDMA BAND 19 FHC
fail issue.
4. For GSM/GPRS/EDGE platform users, it’s recommended to update META tool to this version to fix FHCv2 UTS
fail on UART connection issue.
5. For general platform users, it’s recommended to update META tool to this version to
a. Fixed Chinese CFG/INI file path not supported in share library issue.
b. NVRAM editor union display incorrect issue.
Bug fixes:
1. [META_APP & Share library] Fix WCDMA Band19 DL/UL converting channel from URFCN to MHz incorrect
issue. Users will encounter WCDMA Band 19 FHC calibration fail, and the calibration log shows that the WCDMA
BAND 19 subband channels are incorrect on MHz unit.
2. [META_APP & Share library] Fixed share library Chinese path unsupported issue. Users will encounter the
calibration fail due to the ini/cfg file are not loaded, and the initial values are all default values.
3. [META_APP & Share library] Fixed GPS coclock C0&C1 values incorrect in AP NVRAM issue due to variable
converting to incorrect type. Users will encounter the C0&C1 values are mismatch with calibration result.
4. [META_APP & Share library] Fixed 2G FHCv2 UTS fail due to max ctrl buffer size incorrect on UART
connection. Users will encounter 2G FHCv2 UTS fail when connecting target with UART.
5. [META_APP] Fix NVRAM editor union display incorrect issue. Users will encounter the variable cannot be
changed to another structure format in union type.
New features:
N/A
Enhancement:
1. Re-shaping the factory GUI. Please find the re-shaped GUI from the detail part.

Summary:
1. For MT6572/MT6582/MT6592 GPS Co-Clock platform users, it’s mandatory to update META tool to this version
to fix GPS Co-Clock write incorrect C0 & C1 value into AP NVRAM issue.
Bug fixes:
1. [META_APP & Share library] Fixed GPS Co-Clock write incorrect C0 & C1 value into AP NVRAM issue. User
may encounter GPS tracking fail.
New features:
N/A
Enhancement:
N/A

Summary:
1. For GSM/GPRS platform users, it’s mandatory to update META tool to this version to fix GPRS inter-slot ramp
table update fail in calibration flow issue.
2. For general platform users, it’s recommended to update META tool to this version to:
a. Support multi-RATs temperature calibration auto selection feature.
b. Fixed Chinese NVRAM database path not supported issue.
Bug fixes:
1. [META_APP & Share library] Fixed GPRS inter-slot ramp table update fail in calibration flow issue. Users will
encounter the GPRS inter-slot ramp table which won’t be changed after calibration on GSM/GPRS only platform.
2. [META_DLL] Fixed Chinese NVRAM database path not supported issue. Users will encounter the NVRAM
database loading failed when the database file path is contained Chinese.
New features:
1. Start to support multi-RATs temperature calibration auto selection feature. Please read the details part for more
information.
Enhancement:
1. Extended 2G RF query time-out from 300ms to 1000ms due to META mode logging may causes functions time-
out.
Summary:
1. For WCDMA platform and CMW200/CMW500/CTP3110 users, it’s recommended to update META tool to this
version to fix:
a. WCDMA ILPC random failed issue
b. Cable loss setting useless issue
Bug fixes:
1. [META_APP & Share library] Fixed WCDMA ILPC failed on CMW200/CMW500 due to checking the invalid step
which is lower than -55 dBm.
2. [META_APP & Share library] Fixed WCDMA cable loss configure setting useless on CTP3110 issue due to
reading configure of cable loss setting code missing.
New features:
N/A
Enhancement:
N/A

Summary:
1. For GSM/GPRS/EDGE platform users, it’s mandatory to update META tool to this version to fix FHC path loss
result of GSM900/PCS1900 incorrect issue.
2. For MT6582/MT6589 platform users, it’s mandatory to update META tool to this version to fix MT6582/MT6589
platform modem switching issue.
3. For GPS co-clock platform users, it’s recommended to update META tool to this version to fix GPS co-clock s-
curve c0 & c1 evaluation CSV file check result reverse issue.
4. For GSM/GPRS/EDGE platform users, it’s recommended to update META tool to this version to fix barcode
initial state as “NONE” in META factory.
Bug fixes:
1. [META_APP & Share library] Fixed GPS co-clock s-curve c0 & c1 evaluation CSV file result reverse issue.
Users will encounter the evaluation success, but the check result fails in the CSV file.
2. [META_APP & Share library] Fixed GSM900 and PCS1900 FHC path loss result incorrect issue due to new
FHCv2 feature's side effect. Users will encounter the path loss result of FHC of GSM900/PCS1900 are same with
ini file.
3. [META_APP & Share library] Fixed MT6582/MT6589 platform modem switching issue.
a. Fixed reconnection between different target platform while not close META tool. Fixed platform changing while
not close META tool. Some initial values need to be set default. For example, after connecting and using MT6589,
connection and operation of MT6582 need to be successful.
b. Fixed modem switching on MT6589 based on MT6582 side effect. Check initial values need to be set in detail.
4. Fixed barcode initial state as “NONE” in META factory. Set barcode default is read from "NONE." And in
MF_setup.txt, we add “Enter META Factory Read barcode from enter” in section of [META factory].
a. Enter META Factory Read barcode from enter=2
b. Enter META Factory Read barcode from enter[0,1]=2
i. value of “Read barcode from enter “ = 0: means read from file
ii. value of “Read barcode from enter “ = 1: means read from flash
New features:
N/A
Enhancement:
N/A

Summary:
1. For MT6572/MT6582 GPS co-clock platform users, it mandatory to update META tool to this version to fix GPS
co-clock evaluation fail on Agilent EXT, R&S CMW500, and Star Point 6010 tissue.
Bug fixes:
1. [META_APP & Share library] Fixed GPS co-clock s-curve c0 & c1 evaluation fail on Star Point 6010, R&S
CMW500 and Agilent EXT issue. Users may encounter GPS co-clock evaluation fail and calibration log shows the
frequency error is incorrect.
2. [META_DLL] Fix META_Init_r backward compatibility.
New features:
N/A
Enhancement:
1. [Calibration library] Fixed error code of calibration library for customized tools to define error messages.
Summary:
1. For GSM/GPRS/EDGE platform users, it mandatory to update META tool to this version for fix
GSM/GPRS/EDGE TX power calibration fail issue.
2. For MT6572/MT6582 GPS co-clock platform users, it mandatory to update META tool to this version to fix GPS
co-clock evaluation fail issue.
3. For MT6582 platform users, it’s recommended to update META tool to this version for supporting MT6582
World Phone modem software hot swapping feature.
• In MT6582 world phone. Meta Tool main form GUI started to support switching multiple MD type for one MD.
(Without reset target.)
• In MT6582 world phone. Meta Factory started to support one-switching multiple MD type for one Modem.
(Without reset target.)
Bug fixes:
1. [META_APP & Share library] Fixed GSM/GPRS/EDGE calibration fail on cmu200 due to change band setting
incorrect, users will encounter the log shows instrument power fetching error occurs.
2. [META_APP & Share library] Fixed GPS co-clock s-curve c0 & c1 evaluation fail issue due to the META DLL
multi-slot TX with AUXADC read API has the potential fail risk. Users may encounter GPS co-clock evaluation fail
and calibration log shows GPSCOCLOCK_DUT_TX_FAILED.
New features:
1. MT6582 World Phone is supported for META Tool
2. MT6582 World Phone is supported for META Factory
3. Support four devices parallel calibration and measurement on EXT-C E6607C
Enhancement:
N/A

Summary:
1. For MT6572 platform users, it’s mandatory to update META tool to this version to fix:
• TDSCDMA TX subband power non-accurately issue
2. For GSM/GPRS/EDGE platform users, it’s mandatory to update META tool to this version to fix:
• EDGE TX power check fail issue in traditional calibration
• GSM/EDGE NSFT modulation spectrum test fail issue.
Bug fixes:
1. [META_APP & Share library] Fixed EDGE TX power traditional calibration result varies based on CMU200 due
to set the data compensation setting to the wrong band. Users may encounter the EDGE TX power check fail
issue.
2. [META_APP & Share library] Fixed MT6572 TDSCDMA platform TX subband power inaccurately issue due to
subband compensation start to work in calibration process. Users may encounter the TX power is not accurately
in NSFT when the TX power subband compensation is non-zero values.
3. [META_APP & Share library] Fixed GSM/EDGE NSFT absolute modulation spectrum inaccurately issue due to
use wrong reference power to calculate absolute value. Users may encounter the GSM/EDGE NSFT modulation
spectrum test fail issue.
New features:
1. GPS co-clock initial step and total step generation tool
Enhancement:
N/A
Summary:
1.Start to support MT6572.
2. For MT6280/MT6589/MT6272 platform users, it’s mandatory to update META tool to this version for supporting
GSM/GPRS/EDGE NSFT single-end BER, RX level, and RX Quality.
3. For GSM/GPRS/EDGE platform users, it’s recommended to update META tool to this version to fix:
• EDGE PA TX/RX and L1 software capability consistent check fail issue
4. For GSM/GPRS/EDGE platform users, , it’s recommended to update META tool to this version for supporting
EDGE battery compensation Tool.
• EDGE battery compensation Tool can support users to tune battery compensation with dBm unit.
Bug fixes:
1. [META_APP & Share library] Fixed EDGE PA TX/RX and L1 software capability consistent check fail issue due
to PS turned off EDGE. Users may encounter EDGE TX power test fail problem on calibration when the target is
using EDGE RX only PA and turned off EDGE from PS.
New features:
1. Start to support MT6572
2. Start to support GSM/GPRS/EDGE NSFT single-end BER, RX level, and RX Quality in share library
3. Start to support EDGE battery compensation in META Tool
Enhancement:
N/A

Summary:
1. For GSM/GPRS/EDGE platform users, it’s mandatory to update META tool to this version to fix:
• TX power not very accurately when calibrating without sub-band issue
2. For GSM/GPRS/EDGE platform users, it’s recommended to update META tool to this version to fix:
• W coefficient calibration 1+1 mode result not correct issue
3. For general TDSCDMA platform users, it’s recommended to update META tool to this version to fix:
• NSFT single-end BER failed issue
• TPC calibration data update fail issue
4. For general users, it’s recommended to update META tool to this version to fix:
• Dual talk switch tool connection failed issue
• Audio FIR tuning alignment in wide band mode
Bug fixes:
1. [META_APP & Share library] Fix TDSCDMA single-end BER fail issue due to waiting time not enough to
receive all patterns. The calibration log shows that the single-end BER achieve max iteration (100) and report
error.
2. [META_APP & Share library] Fixed GMSK/EPSK reference temperature not updated issue in temperature
calibration, but in TX power sub-band calibration. User may encounter the power is not very accurately, if TX
power calibration is calibrated without sub-band.
3. [META_APP & Share library] Fixed W coefficient calibration 1+1 mode result not correct issue due to the result
of +IF band had been clean to zero.
4. [META APP][Audio tool] Fix audio FIR tuning alignment in wide band mode.
5. [META APP] Fix Dual talk switch tool connection fail issue due to the working path had been changed after
choosing NVRAM data path. Therefore, the Dual talk switch tool execution file cannot be found because of
relative path.
6. [META APP] Fix TPC calibration data update fail issue due to buffer un-initial after reconnect. Users encounter
this issue after reconnect the target.
New features:
1. RX path loss calibration by two port instrument feature
2. Support 2G & TD co-temperature ADC calibration
3. Start to support single port EXT-C in instrument library
Enhancement:
1. Support warning message when target suffers assert failed or fatal error.
2. Change “PASS/FAIL” field to “Check Result” in CSV file for searching FAIL field more convenient.
Summary:
1. Support META mode logging.
2. For WCDMA platform users, it’s mandatory to update META tool to this version to fix WCDMA band 19 setup
fail in configure file issue.
3. For GMSK, GPRS, and EDGE platform users, it’s mandatory to update META tool to this version to fix 2G
NSFT fail on CMU200 issue.
4. For TDSCDMA two or three PA mode platform users, it’s mandatory to update META tool to this version to fix
TDSCDMA ILPC fail issue and NSFT single-end BER fail issue.
5. For general TDSCDMA platform users, it’s recommended to update META tool to this version to fix NSFT
single-end BER fail issue.
Bug fixes:
1. [META_APP & Share library] Fixed WCDMA band19 set fail in configure file due to the band support variable
overflow. Users will find out that WCDMA band 19 won’t be calibrated even the configure file had set it in the
calibration band candidate.
2. [META_APP & Share library] Fixed 2G NSFT fail due to the signaling option decision lack of B21 in CMU200.
Therefore, it causes signaling GPIB command failed.
3. [META_APP & Share library] Fixed TDSCDMA FHC two PA modes or three PA modes FHC fail issue due to the
turning points of hysteresis were not correct. It issue will cause the ILPC fail when NSFT.
4. [META_APP & Share library] Fixed TDSCDMA single-end BER fail issue due to waiting time not enough to
receive all patterns. The calibration log shows that the single-end BER achieve max iteration (100) and report
error.
New features:
1. [META_APP & share library] Full EDGE SW + EDGE RX only HW check flow
2. [META_APP] Support META mode logging
Enhancement:
1. [META_APP & share library] Renamed the ambiguous naming of high speed PCL calibration to prevent users
from confusing with FHC

Summary:
1. For MT6250, MT6260, MT6280 users, it’s mandatory to update META tool to this version to fix 32K-less LPM
calibration cload frequency overflow on CMU200 issue.
2. For MT6260 GSM only platform, it’s mandatory to update META tool to this version to fix AGC calibration fail
issue.
3. For MT6268 users, it’s mandatory to update META tool to this version to fix META tool connection fail issue.
4. For META DLL users, it’s recommended to update META tool to this version to fix META DLL init fail issue by
META_Init() API.
Bug fixes:
1. [META_APP & Share library] Fixed 32K-less LPM calibration check fail issue due to frequency error may
exceed the maximum tolerance frequency of CMU200. The result of cload frequency became negative in cal file
when fail.
2. [META_APP & Share library] Fixed path loss calibration fail due to the sample number per frame is not correct
issue. The DUT will assert in GSM only platform.
3. [META_DLL] Fixed META_Init() function init fail issue due to the default META handler was set to -1. The issue
will cause invalid META handler problem when using others META DLL API(s).
4. [META_APP] Fixed MT6268 connection issue due to the catcher tran cache mechanism causes 2G/3G
primitive format changing fail. The META DLL log shows that 2G/3G primitive format change successfully, but
following logs show that the size of 3G primitive format is not correct.
New features:
N/A
Enhancement:
1. [META_APP & share library] Add new configure settings as the criteria in LPM cload frequency calibration flow
2. [META_APP & share library] Add new configure setting of WCDMA AFC
Summary:
1 Start to support MT6260.
2 For general users, it’s mandatory to update META tool to this version to fix:
2.1 Download EPSK APC setting to flash fail issue
2.2 META tool crash whenusing PMIC read/write register function in baseband tool
2.3 start buttons of factory tool enable again after calibration in progress
3 For GSM/GPRS/EDGE platform users, it’s recommended to update META tool to this version to fix:
3.1 CAP ID binary search flow over max/min of configure file settings issue
3.2 RxD check box visible issue
4 For WCDMA platform users, it’s recommended to update META tool to this version to fix coupler loss check fail
issue
Bug fixes:
1. [META_APP & share library] Fixed CAP ID binary search flow over max/min range issue due to binary search
algorithm set the initial low bound as fixed value, 0, not configured value.
2. [META_APP & share library] Fixed WCDMA subband coupler loss result not match with log issue due to check
the wrong field of NVRAM item
3. [META_APP][Update Parameter]Fixed download EPSK APC setting to flash failed due to download EPSK APC
setting of unsupported band to nvram.
4. [META_APP][Baseband tool] Fixed PMIC ini file was gone which causes memory violation issue due to access
a null pointer
5. [META_APP][factory] Fixed META factory start buttons enable again after the calibration flow is starting
6. [META_APP][factory] Fixed META factory RxD check box visible in 2G only platform
New features:
1. [META_APP] Start to support MT6260
Enhancement:
1. [META_APP] Integrate connection option with traditional dongle and RNDIS dongle/MIFI router
2. [META_APP & share library] Add new configure setting of WCDMA AFC
3. [META_APP & share library] Changed switching spectrum ambiguous log formats of GSM and Edge
Summary:
1. Start to support MT6589.
2. For EDGE platform and Agilent8960 users, it’s mandatory to update META tool to this version to fix EDGE
NSFT phase peak randomly error issue.
3. For CMU200 users, it’s mandatory to update META tool to this version to fix WCDMA TX power fetch fail issue
and 2G UTS exceed the maximum tolerance power issue.
4. For dual band GGE platform users, it’s mandatory to update META tool to this version to fix APC calibration fail
issue.
5. For TDSCDMA platform users, it’s mandatory to update META tool to this version to fix TD CLPC fail issue
6. For WCDMA platform users, it’s recommended to update META tool to this version to avoid meeting the
WCDMA NSFT start fail issue.
7. For update parameter/nvram editor function users, it’s recommended to update META tool to this version to fix
"Back up to backup partition/SDS" fail issue.
Bug fixes:
1. [META_APP & Share library]Fixed EPSK phase peak randomly error issue due to the phase changed from 000
to 111 based on Agilent8960.
2. [META_APP & Share library] Fixed WCDMA NSFT start fail after FHC or AGC issue due to the initial gain is too
far away to the target gain.
3. [META_APP & Share library] Fixed WCDM traditional TX power calibration randomly fetch power fail issue
based on CMU200 issue due to the CMU200 power measurement was not triggered by MS.
4. [META_APP & Share library] Fixed the issue of the expected power in 2G UTS may exceed the maximum
tolerance power of CMU200.
5. [META_APP & Share library] Fixed APC calibration fail issue due to the inter slot ramp is written on
unsupported band.
6. [META_APP & Share library] Fixed TD CLPC fail issue due to TD max power offset affected hysteresis region.
7. [META_APP]Fixed Back up to backup parition/SDS fail issue due to the smart phone connection state flag not
correct.
New features:
1. [META_APP] Start to support MT6589
2. [META_APP & Share library] TDSCDMA NSFT RSCP test
1. [META_APP] Start to support RNDIS dongle and MIFI router
Enhancement:
1. [META_APP] Limit WCDMA RF tool switch pages after start RF command to fix Maui META tool crash after
start Continuous RX,RSSI and AFC Control but without stop command
2. [META_APP & Share library] Add Absolute spectrum spec for GSM & Edge
Summary:
1. Start to support Agilent EXT wireless communication tester in share library.
2. For MT6280 users, it’s mandatory to update META tool to this version to fix EPSK TX sub-band calibrated band
not matching with configure file issue and TX FHC fail on CMU200 issue.
3. For EPSK RX only platform, it’s mandatory to update META tool to this version to fix updateparameter function
crash issue.
4. For 2G dual band platform, it’s mandatory to update META tool to this version to fix inter-slot ramp table upload
fail issue.
5. For barcode download function users, it’s recommend to update META tool to this version to fix META tool
crash issue
6. For WCDMA platform users, it’s recommend to update META tool and share library to this version to fix the
resolution conversion not correct in check stage issue.
Bug fixes:
1. [META_APP] Fixed power measurement failed but the calibration may pass issue due to measurement report
power is zero and the target power is also zero.
1. [META_APP] Fixed the updateparameter function crash when download EPSK inter-slot ramp table due to
EPSK inter-slot ramp pointer not initialized on EPSK RX only platform.
2. [META_APP] Fixed the inter-slot ramp table upload from target’s NVRAM fail issue due to this function was not
support 2G dual band platform.
3. [META_APP] Fixed the updateparameter function cannot read TX open loop power control data from initial file
or calibration file issue
4. [META_APP] Fixed the barcode download function causing META tool assert issue due to the NVRAM
database initial procedure running in the background
5. [META_APP & Share Library] Fixed MT6280 EPSK TX sub-band calibration not followed the band configure
setting.
6. [META_APP & Share Library] Fixed MT6280 TX FHC fail due to the wideband TX power was over the max
power setting in CMU200.
7. [META_APP & Share Library] Fixed the resolution conversion not correct issue in WCDMA AGC check stage.
8. [META_APP & Share Library] Fixed GGE TX sub-band FHC not supported central channel in the list of initial
file issue due to index the index of sub-band weighting not correct.
9. [Share Library] Fixed GGE TADC cannot calibrate in FHC mode issue
New features:
1. [Share Library] Start to support Agilent EXT wireless communication tester
Enhancement:
1. [META_APP & Share Library] Changed Agilent8960 TDSCDMA minimum power offset from 0.5 to 1 for
skipping the false alarm in the first slot in ILPC test.
Summary:
1. For TDSCDMA platform users, it’s mandatory to update META tool to this version to fix AFC calibration fail on
SP6010 and FHC calibration fail issues.
2. For CMU200 users, it’s mandatory to update META tool to this version or you may encounter WCDMA NSFT
MAX power test randomly fail issue.
3. For WCDMA platform users, it’s mandatory to update META tool to this version to fix NSFT on/off power test
check fail and ILPC report not correct issues.
Bug fixes:
1. [META_APP] Fixed TDSCDMA platform AFC calibration fail on SP6010, due to the cable loss selection fail that
causes instrument changed channel fail.
2. [META_APP] Fixed WCDMA NSFT MAX power test fail on CMU200 issue, due to the CMU200 did not setup
close loop power control all up bit.
3. [META_APP] Fixed the “Switch data card USB Port” may not work issue due to USB switch tool was not
working. Therefore, the USB switch tool in META is updated to fix this issue.
4. [META_APP & Calibration library] Fixed WCDMA Prach check fail issue due to cell power not correct after RSSI
sensitivity test
5. [META_APP & Calibration library] Fixed ILPC fail but the report pass issue due to convert flag into Boolean
variable not correct in Agilent 8960 of instrument library.
6. [META_APP & Calibration library] Fixed TDSCDMA FHC calibrated band not correct issue, due to band E and
band F reversed
New features:
1. [META_APP] Start to support MT6280 GMSK PCL high speed calibration
2. [META_APP & Calibration library]Start to generate CSV calibration report from MT6280
3. [META_APP][Audio tool] Support BesLoudness v4 in ACF-LoudSpeaker
4. [META_APP] Start to support CMW500 instrument
Enhancement:
1. [META_APP] [3G FDD Tool] Changed WCDMA TPC profile PA gain and Coupler loss upper bound to 60 dB.
2. [META_APP] [Baseband Tool] Add ADC&RTC module support query.
3. [EMTA_APP & Calibration library] The maximum TX PA gains of WCDMA are changed from fixed 40(dB) to the
maximum PA gain configured values of each band in configure file.

Summary:
1. For GPS users, it’s mandatory to update META tool to this version to use GPS tool successfully.
2. For SP6010 users, it’s mandatory to update META tool or Instrument library to this version when you are setting
the difference cable-loss for each TDSCDMA band.
3. For MT6162/6163 Calibration Library users, it’s mandatory to update Calibration library to this version to fix
EPSK TX open loop power control calibration fail issue.
4. For AST3001/2001 users, it’s mandatory to update META_APP or Calibration Library to this version when the
calibrated TX powers are existence offsets.
5. For DATA card users, it’s mandatory to update META_APP to this version to fix switching data card USB port
fail issue.
Bug fixes:
1. [META_APP & Instrument Library]Fixed SP6010 Instrument cable loss of each band not correct issue.
2. [Calibration Library]Fixed MT6162/6163 EPSK TX open loop power control calibration fail issue due to that
each PCL sweep frames number was set not correct. It’s should be changed from sweep 4 frames to 1 frame.
3. [META_APP]Fixed METAAPP crash when reading calibration file by update parameter function on the UE
target which is not supported inter-slot ramp table.
4. [META_APP & Calibration Library] Fixed TDSCDMA TX power calibrated imprecise when the Max Power Offset
(dB) ini setting is not zero issue.
5. [META_APP] Fixed the “Switch data card USB Port” may not work issue due to USB switch tool was not
working. Therefore, the USB switch tool in META is updated to fix this issue.
New features:
1. [META_APP][GPS Tool] Support GPS tool
Enhancement:
N/A
Summary:
1. For AST3001 users, it’s mandatory to META tool to this version for fixing NSFT TX power fail issue.
2. For calibration library users, it’s mandatory to update library to this version for fixing several bugs.
3. For LGE Smart phone users, it’s mandatory to update META tool to this version to connect target into META
mode.
Bug fixes:
1. [Calibration library] Fixed WCDMA FHC LNA mode not matching issue
2. [Calibration library] & [META_APP] Fixed runtime error when WCDMA calibration fail issue
3. [Calibration library] & [META_APP] Fixed TDSCDMA TX power NSFT fail issue, due to use TX power normal
calibration
4. [Calibration library] Fixed instrument control fail issue, due to instrument handler leaking.
New features:
1. [META_APP] Support smart phone connection with composite device.
Enhancement:
1. The cable loss configures of SP6010 has been enhanced for supporting different band with different cable loss.

Summary:
1. Calibration library starts to support 2G and WCDMA calibration.
2. For calibration library users, it’s mandatory to update library to this version for fixing several bugs. (For META
tool users, these bugs won’t affect meta tool)
Bug fixes:
1. [Calibration library] Fixed 2G FHC UTS hanging issue when calibrating triple band, double band, or single band
2. [Calibration library] Fixed 2G FHC TPC power check fail issue
3. [Calibration library] Fixed WCDMA PD offset of TX power subband calibration not correct issue
New features:
1. [Calibration library] Start to support MT6162, MT6163, MT6255, and MT6250 calibration
2. [METAAPP DLL] New API(s) to support GPRS inter-slot ramp table read/write operations of NVRAM/file
Enhancement:
N/A

Summary:
1. For META tool users, it’s recommended to update META tool to this version to fix WCDMA RX path-loss
calibration fail issue.
2. For MT6250 share library users, it’s recommended to update share library to this version to fix 2G W-Coefficient
FHC fail issue.
3. For BT Tool (MT6622) users, it’s mandatory to update META tool to this version to test non-signaling RX.
Bug fixes:
1. [META_APP] Fixed WCDMA RX path-loss calibration fail issue
2. [Share library] Fixed 2G W-Coefficient FHC fail issue
New features:
1. [META_APP][BT Tool] Support MT6622 Non-signaling RX test.
Enhancement:
1. [META_APP][Audio Tool] Add AEC 189 support in Quick Speech Tuning page.
2. [META_APP] Add unload authentication file/certificate file.
Summary:
1. For META tool users, it’s mandatory to update META tool to this version to fix 2G TX subband calibration fail
issue.
2. For Agilent 8960 META tool users, it’s mandatory to update META tool to this version to fix TD NSFT CLPC fail
issue.
3. For Audio tool (LoudSpeaker) users, it’s mandatory to update META tool to this version to fix Download to Flash
issue in Audio compensation – LoudSpeaker.
Bug fixes:
1. [META_APP] Fixed 2G TX subband calibration power diverging issue.
2. [META_APP] Fixed TD NSFT CLPC fail issue.
3. [META_APP] Fixed RF tool get temperature fail issue.
4. [META_APP] Fixed WCDMA NSFT read cable loss from config file fail issue.
5. [META_APP] Fixed 2G TX subband calibration divided by zero issue.
6. [META_APP][Audio tool] Fixed Upload from flash issue in Audio compensation – LoudSpeaker.
New features:
1. [META_APP] Support triggering backup partition.
Enhancement:
1. [META_APP] [Update Parameter] Download IMEI to flash check enhancement.
2. [META_APP] [Factory Calibration] Temperature ADC calibration will return fail and notify user to fill ADC curve
section in INI file.

Summary:
1. [Important Notice] Officially supports MT6250.
2. [Important Notice] Officially supports AST3001
3. For META tool users, it’s mandatory to update META tool to this version to fix inter-slot ramp table mess up
after calibration issue.
4. For Audio tool users, it’s recommended to update META tool to this version to fix “All Pass Filter” wrong display
issue.
Bug fixes:
1. [META_APP] Fixed writing wrong number of inter-slot ramp table when ini file without inter-slot ramp table
settings issue.
2. [META_APP] Fixed RF tool get temperature fail issue.
3. [META_APP] Fixed tool crash issue after tool reconnects target.
4. [META_APP][Audio Tool] Fixed “All Pass Filter” Display after uploading from flash in Quick Speech Tuning
Page.
New features:
1. [META_APP] Support dual talk USB com port switch for smart phone
2. [META_APP] Start to support configurable W calibration from MT6250.
Enhancement:
1. [META_APP] Add option to shut down target including feature phone and smart phone.

Summary:
1. [Important Notice] Officially supports MT6922.
2. For Audio tool users, it’s mandatory to update tool to this version to tune audio equalizer with earphone
frequency respond.
3. For METAAPP multi-thread development users, it’s mandatory to update META DLL to this version to fix
thread-safety issue.
Bug fixes:
1. [META_APP_DLL] Fixed multi-thread development issue of some API(s)
2. [META_DLL] Fixed the rscp results not correct issue of META_3grf_Rscp_r() API
New features:
N/A
Enhancement:
1. [META_APP][Audio Tool] Add earphone frequency respond tuning in audio equalizer.
Summary:
1. [Important Notice 1] From this version, Maui META supports Smart Phone security connection.
2. For v6.1208 meta dll multi-thread developers, it’s mandatory to update the meta dll to this version to fix the
thread-safe issue.
3. For Audio tool(audio tuning) users, it’s mandatory to update tool to this version to use audio equalizer tuning
function.
4. For Audio tool(speech) users, it’s mandatory to update tool to this version to load LR file correctly in FIR
tuning page.
5. For Auxiliary ADC users, it’s mandatory to update tool to this version to fix apply all function can’t work and
slope/offset calculation.
6. For Baseband register access, it’s mandatory to update tool to this version to show HEX value correctly in
Baseband/PMIC Register Read/Write page.
7. For MT6255 TD projects, it’s mandatory to update tool to this version to fix several bugs of META tool NVRAM
access fail on MT6255 TD projects.
Bug fixes:
1. [META_DLL] Fix v6.1208 thread-safe issue, the meta dll may work randomly fail when multiple threads access.
The thread-safe issue only occurs in v6.1208 meta dll, because of un-patched STL build environment.
2. [META_APP][Audio Tool] Fix loading LR file issue in FIR Tuning page.
3. [META_APP][Baseband Tool] Fix baseband and PMIC register HEX value display.
4. [META_APP][Baseband Tool] Fix Auxiliary ADC calculate slope and offset.
5. [META_APP][Factory Calibration] Fix 2G AFC calibration fail.
6. [META_APP][Update Parameters] Fix 2G AFC parameters update fail.
7. [META_APP][RF Tool: Crystal AFC Control] Fix 2G AFC upload from load or download to flash fail.
New features:
1. [META_APP] Support security connection for Smart Phone.
2. [META_APP][Audio Tool] Support audio equalizer.
Enhancement:
1. [META_APP][Audio Tool] Integrate all audio NVRAM items access.
2. [META_APP][Audio Tool] Update uplink Gain mapping in Quick speech tuning page.

Summary:
1. [Important Notice] The descriptions in previous TDSCDMA factory calibration CFG band setting is incorrect,
please check the application note or the descriptions in this release note.
2. For MT6255 customers, it’s recommended to update tool to this version for the 32k crystal removal AFC
calibration issue.
3. For users who need multi-languages support in FAT system, please replace original FAT API(s) by new FAT
UTF API(s) and change parameter type from char to wchar.
4. For 2G and TD BB chip co-crystal project, it’s recommended to update tool to this version for supporting co-
crystal AFC calibration.
5. For Audio tool users, it’s recommended to update tool to this version to load LR file correctly in FIR tuning
page.
Bug fixes:
1. [META_APP][Factory Calibration] Fix the 32k crystal removal AFC calibration issue that the META tool did not
output calibration file for later usage and could later loss the calibration data when user later use the *.CAL file for
restoring calibration data.
2. [META_APP][Factory Calibration] Fix Agilent8960 unstable when calibration after full reset issue, that
Agilent8960 is controlled by the META tool may fail in TX level setting command after full reset on some Fast
Switch Lab applications.
3. [META_APP][Factory Calibration] Fix calibration items accident turned on not by user issue that calibration
items may turned on in accident due to the non-initialed variables, and this situation may causes the calibration
fail randomly.
4. [META_APP][Audio Tool] Fix loading LR file issue in FIR Tuning page.
New features:
1. [META_DLL] New FAT UTF API support multi-languages.
2. [META_APP][Share library] Support 2G & TD co-crystal AFC calibration.
Enhancement:
N/A
Summary:
1. Officially supports MT6255.
2. For Audio tool (Speech/Audio) users, this version will disable audio taste function in chip MT6252/MT6251.
3. The booting mode can be changed to normal mode or download mode by
META_MISC_EX_SetCommandToSystem function in 76M datacard chip.
4. For MT6162 2G calibration users, it’s recommended to update to this version to fix the LNA middle/low mode
check fail issue.
Bug fixes:
1. [META_APP][Audio Tool] Disable Audio Taste Function in Chip MT6252 and MT6251
2. [META_APP_DLL] Fix METAAPP_readIMEIfromNVRAM and METAAPP_writeIMEIfromNVRAM API(s) thread-
safe and memory leaking problems.
3. [META_APP][Factory Calibration] Fix the MT6162 2G LNA middle/low mode check fail issue due to path-loss
CFG loading issue.
New features:
1. [META_DLL] Add system control function (META_MISC_EX_SetCommandToSystem) to control booting mode
in 76M data-card chip.
Enhancement:
1. [META_APP][Factory Tool] Add pop-out warning window to notify user that Aux. ADC is calibrated before
shipment. The calibration can be skipped in MT6255 chip.

Summary:
1. [Important Notice] For WCDMA NSFT cable loss setting update, please update the META tool to this version.
2. For smart phone users, it’s recommended to update to this version if your device will enumerate preloader
com port with designate PID&VID or generate composite com port.
3. For Audio tool (DMNR) users, it’s recommended to update to this version to ensure loading ini file correctly.
4. For BT users, it’s recommended to update to this version to stop inquiry function in Connection Test page
successfully.
5. For NFC users, it’s recommended to update to this version to clean information after previous disconnection.
Bug fixes:
1. [META_APP][Audio Tool] Fix DMNR load from ini file incorrectly.
2. [META_APP][BT Tool] Fix tool crash after stop inquiry in Connection Test page.
3. [META_APP][NFC Tool] Clean previous information after card disconnection.
New features:
1. [META_APP][META connection] Support smart phone connection via designate USB com port.
Enhancement:
N/A

Summary:
1. For BT RF testers, it’s recommended to update to this version to facilitate the usage of BT TX/RX test.
2. For Audio tool (FIR Tuning) users, it’s recommended to update to this version to load target file successfully.
3. For Audio tool (DMNR) users, it’s recommended to update to this version to facilitate the usage of audio
DMNR tool.
Bug fixes:
1. [META_APP][Audio Tool] Fix load target file error in Speech FIR page.
New features:
1. [META_APP][BT Tool] Add update access code option and new packet types in BT RF Test Page.
2. [META_APP][Factory Calibration] Add 3G-single mode DCXO calibration support.
3. [META_APP][3G FDD RF Tool] Add 3G-single mode CAP ID manual test support in AFC control tab.
Enhancement:
1. [META_APP][Audio Tool] Enhance the facility of audio DMNR tool.
Summary:
1. For Wide-band DMNR users, it’s mandatory to update to this version.
2. For WIFI MT5931 and 802.11n users, it’s mandatory to update to this version.
3. For NFC users, it’s mandatory to update to this version.
4. For Audio tool (Speech FIR Tuning) users, it’s recommended to update to this version to generate narrow
band FIR parameters automatically.
5. For Audio tool (Audio Compensation) users, it’s recommended to update to this version to facilitate to use
audio compensation tool.
6. For Factory calibration and NSFT in HSPA projects, it’s mandatory to update to this version for fixing Rx
pathloss calibration check procedure and random fail in CMU200 initialization.
7. For 2G GMSK TX PCL calibration, it’s recommended to update to this version to improve throughput of the
GMSK TX PCL calibration.
8. For 2G RF calibration, it’s recommended to update to this version for the calibration item automatic selection
mechanism. (Required target version is 11BW1144MP and later)
Bug fixes:
1. [META_APP][Audio Tool] Fix speech FIR tuning generate parameters in narrow band mode.
2. [META_APP][Calibration Library] Fix the random fail in CMU200 initialization due to asynchronous command
response.
3. [META_APP][Calibration Library] Fix the issue that the RX pathloss check procedure might not be active at
some condition.
New features:
1. [META_APP][Audio Tool] Support wide-band Dual Mic. NR.
2. [META_APP][NFC Tool] Support NFC Tool.
3. [META_APP][WIFI Toll] Support chip MT5931 with 802.11n.
4. [META_APP][Factory Calibration] Add High Speed Calibration for 2G GMSK TX PCL calibration.
5. [META_APP][Factory Calibration] Mandatory 2G RF calibration items are highlighted with bold face.
Enhancement:
1. [META_APP][Audio Tool] Enhance the facility of audio compensation filter tool.

Summary:
1. For Baseband tool users, it's recommended to update to this version to avoid tool crash due to access
baseband registers after abnormal result.
2. For Audio tool users, it's recommended to update to this version to avoid tool crash due to abnormal UI control
after accessing NVRAM in FIR Tuning page.
3. For TDSCDMA project factory calibration, it's recommended to update to this version to correct the status
display problem on factory calibration UI.
Bug fixes:
1. [META_APP][Baseband Tool] Fix tool crash issue when accessing register exceptionally.
2. [META_APP][Audio Tool] Fix tool crash issue after accessing NVRAM in FIR Tuning page.
3. [META_APP][Calibration Library] Fix the status display when calibrating TDSCDMA factory calibration item.
New features:
N/A
Enhancement:
N/A
Summary:
1. For Baseband tool users, it’s recommended to update to this version due to backlight level range is not always
fixed from 0 to 5.
2. For Data Card users, it’s recommended to update to this version due to the library of previous USB switch tool
depends on msvcr90.dll.
3. For Audio tool users, it’s recommended to update to this version to generate c files with wide band speech
input/output and speech enhancement parameters.
4. For Audio tool users, it’s recommended to update to this version to synchronize the order of speech
enhancement parameters of ini file in both narrow band and wide band mode.
5. For META Authentication users, it’s recommended to update to this version to improve the production line
performance.
6. For project with NVRAM_PSEUDO_MERGE is turned on, it’s recommended to update to this version to
resolve the backup & restore calibration data failure when the PACKLID gains bigger.
Bug fixes:
1. [META_APP][Baseband Tool] Remove limitation of both LED light level (keypad and Main/Sub LCD).
2. [META_APP][USB Switch Tool] Update USB switch tool v2.1134.00 for msvcr90.dll dependency removal.
New features:
1. [META_APP][Audio Tool] Generate c file with wide band audio speech parameters.
Enhancement:
1. [META_DLL][NVRAM] Enhance the META authentication feature to avoid reloading database for second or
later connections.
2. [META_DLL][MISC] META DLL skips file size checking for PACKLID.
3. [META_APP][Audio Tool] Synchronize the order of speech enhancement parameter in both narrow band and
wide band when generating ini file.

Summary:
1. For barcode download users, it's recommended to update to this version due to memory corruption issue with
input barcode length more than 63 characters.
2. For NVRAM editor users, it's recommended to update to this version due to race condition at interlocking
read/write operations to NVRAM items.
3. For MT6276, MT6573 3G TDD/FDD RF tool users, it's recommended to update to this version due to the
incorrect limit value for temperature ADC and thus cannot download modified values to NVRAM.
4. For MT6162 2G closed-loop TXPC / open-loop TXPC update parameter users, it's recommended to update to
this version since the load from NVRAM does not correctly interpret the "temperature" field and thus the value
saved to local file is incorrect.
5. For Upload file API users, it's mandatory to update META DLL to this version since the return status code is
incorrect and thus the API caller cannot tell whether the operation is successful or not.
Bug fixes:
1. [META_APP][Barcode Download] Correct warning message when input more than 63 characters.
2. [META_APP][Barcode Download] Load only 63 characters from file when input barcode size is more than 63
characters.
3. [META_APP][Barcode Download] Fix message of status bar when cancel to change database.
4. [META_APP][IMEI Download] Correct warning message when input more than 13 digits.
5. [META_APP][NVRAM Editor] Fix META crash issue when repeating to read and write NVRAM.
6. [META_APP][3G TDD RF tool] Fix the upper limit value check to temperature ADC value fields.
7. [META_APP][3G FDD RF tool] Fix the upper limit value check to temperature ADC value fields.
8. [META_APP][Update parameter] Fix the issue that the user cannot get the temperature value field from
NVRAM while user tries to load from NVRAM and then save to a local file.
9. [META_DLL][Upload File] Fix the issue that the status code for upload file is incorrect.
New features:
N/A
Enhancement:
N/A
Summary:
1. For 3G TDD factory calibration users, it's mandatory to update to this version, since the bug affects the 3G
TDD-only calibration.
2. For 3G FDD FHC users of MT6276/MT6276M/MT6573 + MT6162, it's recommended to update to this version,
since the enhancement to the calibration plan setting will help the user check whether the INI setting follows the
SOP.
3. For 2G users that tests sensitivity with NSFT BER test on Agilent8960, it's recommended to update to this
version, since the enhancement to the BER test delay timing will improve the stability of the test.
4. For 2G factory calibration users, it's recommended to update to this version, since the sub-band flatness of
sub-band calibration is improved.
5. For MT6162 2G open-loop power control users of MT6162, it's mandatory to update to this version.
6. For MT6276M data card users, it's recommended to update to this version.
Bug fixes:
1. [META_APP][Factory Calibration] Fix a 2G instrument initialization failure at 3G TDD calibration only mode.
New features:
1. [META_APP][Factory Calibration] The open-loop power control tracking flag is enabled and reference
temperature is set in this version.
Enhancement:
1. [META_APP][Factory Calibration] Add BER test delay timing configuration to wait for instrument to settle before
fetching BER test samples.
2. [META_APP][Calibration Library] Add search criteria for WCDMA FHC calibration plan setting to check the INI
setting follows the SOP.
3. [META_APP][Factory Calibration] The sub-band flatness is improved by changing the sub-band calibration
target power from target power setting in CFG file to calibrated power after TX PCL calibration.
4. [META_APP][META Connection] Add USB com port filter setting for META connection with specific com ports.

Bug fixes:
1. [META_APP] Create certificate handle failed (Only affects security chip customers)
2. [META_APP] Update parameter may sometimes hang while writing to flash
3. [META_APP_DLL] MT6251 ADC calibration issue
4. [META_DLL] Progress callback for uploaded file volume on download tool
5. [META_DLL] Cannot forced overwrite the uploaded file
6. [META_DLL] Backup/Restore calibration data fail
7. [META_DLL] USB COM port enumeration failed on Smartphone project when there's no COM port on PC
New features:
1. [META_APP] FAT Editor folder copy (For CMCC package folder installation / LGE's folder copy requirements)
2. [META_APP] 2G project temperature ADC calibration (For MT6513+OH project)
Enhancement:
1. [META_APP] Update USBSwitchTool
2. [META_APP] 0.9V limit for MT6573

Bug fixes:
1. [IMEI Download] Fix the tool crash issue while writing IMEI on Smart phone project.
2. [FM Tool] Fix the FM Chip ID decoding error on 11A software.
3. [Factory calibration] TX IQ calibration failed on certain Agilent 8960 TA.
4. [FM Tool] Fix the RDS TA flag decoding error.
5. [Audio Tool] Fix the Narrow-band/Wide-band tuning muted.
New features:
N/A
Enhancement:
N/A

Bug fixes:
1. [META_APP][Audio] Fix wide speech enhancement coefficient type
2. [META_APP][Audio] Fix wide band FIR tuning underflow
3. [META_APP][FM] Fix FM Mono/Stereo status representation
New features:
1. [META_APP]Supports MT6622/MT6626
Enhancement:
1. [META_APP]Tool log path setting (META DLL log/ BROM DLL log / EBOOT DLL log)
2. [META_APP][FM] FM status unit(RSSI, Cap array)
META_Rf_NSFT_StartRxLevel
META_Rf_NSFT_GetRxLevel
META_Rf_NSFT_GetRxQual
9. [META_DLL][RF] Enhanced PM interface
META_Rf_PmEx
META_Rf_IrPm
10. [META_DLL][RF] Closed-loop detector measurement functions
META_Rf_GetTXPCDetectorValueByPCLGMSK
META_Rf_GetTXPCDetectorValueByPCLEPSK
META_Rf_GetTXPCDetectorValueGMSK
META_Rf_GetTXPCDetectorValueEPSK
META_Rf_GetTXPCSubbandCompensationGMSK
META_Rf_GetTXPCSubbandCompensationEPSK
11. [META_DLL][BB] Enhanced ADC measurement interface
META_BB_ADCGetMeaSumData_Ex
12. [META_DLL][NVRAM] Wide-band audio parameter NVRAM buffer compose/decompose function
META_NVRAM_Compose_AudioFIRParam_WB
META_NVRAM_Decompose_AudioFIRParam_WB
META_NVRAM_Compose_AudioSpeechParam_WB
META_NVRAM_Decompose_AudioSpeechParam_WB
13. [META_DLL][NVRAM] Closed-loop detector compensation NVRAM buffer compose/decompose function
META_NVRAM_ClosedLoopTXPC_Len
META_NVRAM_Compose_ClosedLoopTXPC
META_NVRAM_Decompose_ClosedLoopTXPC
14. [META_DLL][NVRAM] 2G RF LNA middle/low mode NVRAM buffer compose/decompose function
META_NVRAM_lnaPathLoss_Len
META_NVRAM_Compose_lnaPathLoss
META_NVRAM_Decompose_lnaPathLoss
15. [META_DLL][NVRAM] Audio compensation filter software feature NVRAM buffer compose/decompose
function
META_NVRAM_Compose_AudioParam_EX2
META_NVRAM_Decompose_AudioParam_EX2
META_NVRAM_Compose_AC_SWFIR_Param
META_NVRAM_Decompose_AC_SWFIR_Param
16. [META_DLL][NVRAM] BT chip NVRAM buffer compose/decompose function for 10AW1108MP or later
software on MT6612, MT6236, MT6276
META_NVRAM_BT_Compose_MediatekBtChip
META_NVRAM_BT_Decompose_MediatekBtChip
17. [META_DLL][Util] Target VPA voltage setting query function
META_Util_QueryVpaVoltageList
18. [META_DLL][General] META connect function for USB connection
META_ConnectInMetaModeByUSB
New Feature
1. [META_APP/META_DLL][General] Support compressed database format after W1108MP software.
2. [META APP][Audio tool] BesLoudness v3.

Bug fixes:
1. [WiFi] Fix the data field mapping issue wifi EEPROM and NVRAM.
2. [Factory calibration] Fix the GMSK Full PCL calibration non-trigger issue in low PCL of low frequency band
calibration.
New features:
1. [Factory calibration] Supports 2G NSFT Rx Qual and Rx Level.
Enhancement:
N/A

Bug fixes:
N/A
New features:
1. [General] Supports MT6252.
Enhancement:
N/A

Bug fixes:
N/A
New features:
1. [META_APP][IMEI Download] Supports writing IMEI value of 3rd IMEI or 4th IMEI when the target supports
Gemini+.
Enhancement:
N/A
Bug fixes:
1. [META_APP][Factory Calibration] Fix the GMSK TX IQ calibration fail isse in v6.1028, v6.1032, v6.1040, and
v6.1044
New features:
N/A
Enhancement:
N/A

Bug fixes:
1. [META_APP][General] Fix the connect smart phone timeout issue caused by the timeout value too short
2. [META_APP][NVRAM Editor] Fix the access violation in NVRAM editor after loading an invalid database
3. [META_APP][Audio Tool] Fix the change database false alarm when the user selet the valid database.
New features:
1. [META_DLL][RF] NSFT single-end BER interface
META_Rf_NSFT_ConfigSBER
META_Rf_NSFT_GetSBER
2. [META_APP][Factory Calibration] NSFT BER test supports single-end BER
3. [META_APP][Audio Tool] Add "Custom Spec" functionality in Speech FIR Tuning to support customer load a
self-defined spec file.
Enhancement:
1. [META_APP][Audio Tool] Display frequency response based on the FIR coefficients uploaded from flash in
“Audio Compensation” page.

Bug fixes:
N/A

New features:
1. [META_APP][Audio Tool] Support Audio Gain Table GUI text display dynamically (sync with gain_table.c).

Enhancement:
1. [META_APP][Factory calibration] Single button error report for collecting factory calibration logs.
2. [META_APP][Factory calibration] 2G NSFT flow initial tracking flow for resolving 1st test channel frequency
error out-of-range.

Bug fixes:
N/A

New features:
N/A

Enhancement:
1. [MATV] MATV tool channel quality index changed to 9 items.

Bug fixes:
1. [META_APP_DLL] Fix memory leak issue while doing NVRAM read/write
2. [META_APP][Factory Calibration] Fix NSFT start fail due to rounding error of CW mode related GPIB
commands for traditional 33-step AFC calibration on Agilent 8960

New features:
1. [META_APP][Audio] Provide MATLAB-like coefficients generation of Audio Compensation filter.

Enhancement:
1. [Factroy Calibration] TX sub-band calibration algorithm revision. Extending sub-band calibration samples from 1
to 4 or more (up to 50) and provide the fexibility to adjust the sub-band sample range.
Bug fixes:
1.[META_APP][Audio] Fix the incompletely loading issue of the function "Load from file" of page "Quick Speech
Tuning".

New features:
1. [META_DLL][MATV] Provide the followin APIs for controlling Mobile Analog TV module
META_MATV_PowerOn
META_MATV_PowerOff
META_MATV_SetRegion
META_MATV_StartScan
META_MATV_StartFullScan
META_MATV_StopScan
META_MATV_GetChannelList
META_MATV_ChangeChannel
META_MATV_SetChannelProperty
META_MATV_GetChannelQuality
META_MATV_GetChannelQualityAll
2. [META_APP][MATV] Provide "MATV Tool" GUI for Mobile Analog TV module evaluation
3. [META_APP][Factory Calibration] Supports Renasas PA RPF88130B, RPF88143B, RPF88144B, RPF88150B,
RPF89007B GMSK TX PCL calibration
4. [META_APP][Factory Calibration] Supports Renasas PA RPF89007B EPSK 4 PCL TX PCL calibration

Enhancement:
1. [META_DLL][NVRAM] Remove META_NVRAM_Reset categories except NVRAM_RESET_FACTORY.
2. [META_APP][General] Main form GUI enhancement for connection indication.

Bug fixes:
N/A

New features:
N/A

Enhancement:
1. [META_APP] Modify Audio Gain Table to change GUI based on NVRAM database file user selected.

Bug fixes:
N/A

New features:
N/A

Enhancement:
1. [META_DLL][General] Retrieve UART cable driver version
2. [META_APP][Factory Calibration] Reset procedure for Agilent 8960 before calibration
3. [META_APP][Factory Calibration] Save factory calibration UI settings after the calibration

Bug fixes:
N/A

New features:
1. [META_APP][Update Parameter] WiFi MAC Address backup.

Enhancement:
N/A
Bug fixes:
1. [META_DLL][FM] Fix RDS block counter related API failure
2. [META_APP][Factory Calibration] Fix TX FB DAC calibration inconsistency

New features:
1. [META_DLL][MISC] Backup Partition API for initialization and verification
META_MISC_EX_InitBPAreaFromNVRAM
META_MISC_EX_VerifyBPArea

Enhancement:
1. [META_APP][Factory Calibration] TX sub-band calibration for AD6546 and MT6253 is supported

Bug fixes:
N/A

New features:
1. [META_DLL][Audio] Target audio DL Gain capability query function.
META_Audio_EX_GetDLGainCapability
2. [META_DLL][FM] FM RDS API for RDS log information and BLER
META_FM_GetRDSLogData
META_FM_GetRDSBLERRatio
3. [META_APP][BT Tool] Supports MT6616.

Enhancement:
1. [META_APP][RF Tool] Multislot-Tx supports TX power rollback settings.
2. [META_APP][RF Tool] GMSK and EPSK level and ramp settings supports battery/temp. compensation
threshold settings.
3. [META_APP][Factory Calibration] Factory calibration UI enhancement, user selectable DC offset calibration (for
SKY 77517/77518/77506/77531 and SKY 77317/77318/77328 series).
4. [META_APP][Audio] Provide DL PGA with adjustable step size in Quick Speech Tuning.

Bug fixes:
N/A

New features:
N/A

Enhancement:
1. [Audio] Support Audio Compensation Coefficients generation for load before w09.52.
2. [Audio] Enable Melody FIR Page for only MT6219, MT6223, MT6225, MT6226, MT6227, MT6228, MT6229,
MT6230, MT6253 chips.

Bug fixes:
1. [META_APP][Factory Calibration] Fix APC DC offset calibration fail to trigger power issue while using CMU200.
2. [META_DLL] Fix backup and restore calibration data possible infinite loop condition while the size of the section
is larger than 2K bytes.
3. [META_DLL] Fix the problem of NVRAM Database initialization procedure fail when the tool is disconnected
with target.

New features:
1. [META_APP][Audio] Provide the runtime tuning functionality of audio compensation parameters.
2. [META_DLL][Util] Reboot META mode into normal mode.
META_Util_RebootToNormalMode
3. [META_DLL][Util] Provide BT/WiFi single antenna sw capability query and antenna path swithcing.
META_Util_QueryBTWiFiSingleAntennaCap
META_Util_SetAntennaPathToBT
META_Util_SetAntennaPathToWiFi

Enhancement:
1. [META_APP][Factory Calibration] NSFT modulation spectrum absolute limit checking.
Bug fixes:
1. [META DLL] Fix ADC calibration information retreiving from EFUSE size mis-matched issue.

New features:
N/A

Enhancement:
N/A
META_MISC_CalDataIntegrity_DelAll
META_MISC_CalDataIntegrity_CheckOne
META_MISC_CalDataIntegrity_CheckAll

3. [META_DLL][MISC] Provide ADC Calibration information retreiving from EFUSE.


META_MISC_GetADCFromEFuse

4. [META_DLL][Util] Provide target NVRAM security checking.


META_Util_CheckIfTargetNVSecOn

5. [META_DLL][Audio] Provide Auio ACF filter operations.


META_Audio_GetACFilterType
META_Audio_SetACFilterCoef

6. [META_DLL][FM] Provide APIs for MT6616 support.


META_FM_SetVolume
META_FM_AutoScan
META_FM_SetRDS
META_FM_GetRXFilterBW
META_FM_GetPAMDLevel
META_FM_GetMR
META_FM_SetDecodeMode
META_FM_SetHCC
META_FM_SetPAMDThreshold
META_FM_SetSoftmute
META_FM_SetDeemphasisLevel
META_FM_SetHLSide
META_FM_SetDemodBW
META_FM_SetDynamicLimiter
META_FM_SetSoftmuteRate
META_FM_GetPI
META_FM_GetPTY
META_FM_GetPS
META_FM_GetAF
META_FM_GetRT
META_FM_GetTP
META_FM_GetTA
META_FM_GetMS
META_FM_GetGoodBlockCounter
META_FM_GetBadBlockCounter
META_FM_ResetBlockCounter

Bug fixes:
N/A

New features:
1. [META_APP][RF Tool] Provide AD6546 Polar APC CAP Sweep/Calibration function.
2. [META_DLL][MISC] Provide API for SIM card module insertion detection.
META_MISC_CheckSIM1Inserted
META_MISC_CheckSIM2Inserted

Enhancement:
N/A
Bug fixes:
N/A

New features:
1. [META_APP][Factory calibration] Supports NSFT, including GMSK TX performance test, BER, EPSK TX
performance test.
2. [META_APP][Audio Tool] Provide the function “Quick speech tuning” for customers to fine tune speech
parameters easily.
Note: the INI file format of “custom volume settings” is changed.
3. [META_DLL][MISC] Provide API for NVRAM folder amount query.
META_MISC_QueryNVRAMFolderAmount
4. [META_DLL][Audio] Provide APIs for wave file playing.
META_Audio_Set_Output_Dev
META_Audio_Set_Output_Vol
META_Audio_Play_Wave_File
META_Audio_PlayCurMemContent
META_Audio_StopPlaying
META_Audio_FreeMemory

Enhancement:
1. [META_DLL][MISC] The NVRAM initial flow changes NVRAM folder structure. The following API will return all
the NVRAM folders on target instead of single folder.
META_QueryNVRAMFolder
2. [META_DLL][Init] Provide API for specifying the META DLL log filepath.
META_DebugOn_With_FilePath

Note:
META APP provides NSFT(non-signaling final test) from this version
so the major version change from 5 to 6.

Bug fixes:
N/A

New features:
1.[META_DLL][RF] Provide API for NSFT (Non-Signaling Final Test)
META_Rf_NSFT_Start
META_Rf_NSFT_ChangeSettings
2.[META_APP] Support BT chip MT6612

Enhancement:
1.[META_APP][Update Parameter] Auto select download parameters for user when load calibration data from file.

Bug fixes:
1.[META_APP][Factory Calibration] Fix the FHC 33-step AFC calibration failure issue when user use traditional
33-step AFC calibration first.

New features:
1.[META_APP][Factory Calibration] Integrate Skyworks PA pedestal calibration before FHC UTS.
2.[META_APP][Factory Calibration] Integrate AD6548 initial AFC DAC pre-calibration before FHC DTS.
3.[META_DLL][BASIC] In APIs related to "backup and restore calibration data", add two INI sections:
[Backup/Restore File Prefix-MORE] and
[Backup/Restore File Prefix-DELETE]
The sections will be processed in the following APIs:
META_BackupCalibrationData
META_RestoreCalibrationData
META_BasicBackupCalibrationData
META_BasicRestoreCalibrationData

Enhancement:
N/A
Bug fixes:
N/A

New features:
1.[META_APP][SmartPhone] Integrate EBoot dll to boot up the smartphone into META mode and connect with the
smartphone.
2.[META_DLL][Common] Provide an API to check version between META DLL and phones.
META_Util_CheckTargetRequiredVersion
3.[META_DLL][Common] Provide an API to modify the version check requirements of phones
META_Util_SetTargetAssertCheckParas
4.[META_DLL][Common] Add the procedures of version check between META DLL and phones in the following
original APIs.
If the phones are enforced to check version and check fail, phones will assert.
META_ConnectWithTarget
META_ConnectWithTargetByUSB
META_ConnectInMetaMode
META_ConnectInMetaModeByUSB

Enhancement:
1.[META_DLL][FAT] Prevent data loss while using the following API.
META_FAT_Find_Start

Bug fixes:
N/A

New features:
1.[META_APP][CMMB] Provide channel settings for auto-scan operation.
2.[META_APP][Factory Calibration] Support MT5921: WiFi Crystal CAP ID and Internal Sensor calibration with
LitePoint IQView.
3.[META_APP][Factory calibration] 33 step AFC slope auto calibration on CMU200.
4.[META_DLL][MISC] Provide the API to get the IMEI record number on the target.
META_MISC_GetIMEIRecNum
5.[META_DLL][CMMB] Provide the API to set frequency range in auto scan operation.
META_CMMB_AutoScanWithFreqRange

Enhancement:
1.[META_DLL][FAT] Extend the default timeout of basic FAT operations to 10 seconds.

Bug fixes:
N/A

New features:
1.[META_APP][RF] Add the check mechanism on EPSK interslot_lowest_dac value. It should not exceed the APC
dac of the power level in both GMSK and EPSK modulation.
2.[META_APP][Common] Remove unnecessary UI display on BT, WIFI, CMMB, TDMB, FM, Audio, ADC
calibration function in META Tool for smartphone project
3.[META_APP][Factory calibration] Support MT5921: WiFi Crystal CAP ID and Internal Sensor calibration with
AgilentN4010A.
4.[META_APP][Update Parameter] Add one new item "WiFi Crystal CAP ID/Internal Sensor" for MT5921.
5.[META_DLL][NVRAM] Provide the following APIs to compose/decompose the NVRAM structure of LID:
NVRAM_EF_WNDRV_EXT_SETTING_TRIMVAL_THERMOVAL_LID for MT5921.
META_NVRAM_TRIM_THERMO_Len
META_NVRAM_WiFi_Compose_TrimThermo
META_NVRAM_WiFi_Decompose_TrimThermo
6.[META_DLL][WCDMA] Provide the following API for AD6551 to turn on/off the internal power detector.
META_3Grf_SetPowerControlMode

Enhancement:
1.[META_APP][Factory calibration]Improve FHC performance on CMU200 by using one-shot GPIB command to
set DTS frequency, burst power level, and burt type.
2.[META_DLL][NVRAM] Provide the following APIs to reduce the NVRAM read/write coding efforts.
META_NVRAM_Read_Ex
META_NVRAM_Write_Ex
Bug fixes:
1.[META_APP][Factory calibration] Fix the problem of 2G AFC calibration fail when users use Agilent8960 to do
RF auto-calibration.

New features:
1.[META_DLL][RF] Provide the following APIs for FHC DTS to get FHC DTS result in an asynchronous way.
META_Rf_StartFdtDLNotWaitResult
META_Rf_GetFdtDL
2.[SmartPhone] Provide the following APIS for runtime detection to see if the target is smartphone-supported and
to decide the provided functionalities.
[Notice]: This function is supported after w09.06 target code base.
META_Check_SmartPhoneModem_support
3.[META_APP][CMMB] Provide CMMB module reset function
4.[META_APP][Factory calibration]Support FHC(Fast handset calibration) on CMU200.

Enhancement:
N/A

Bug fixes:
N/A

New features:
1.[META_APP][CMMB] Modify the UI about displaying signal strength information.
2.[META_DLL][CMMB] Modify the API: META_CMMB_GetSignalStrength for providing more detailed signal
information.
3.[META_DLL][WCDMA] Provide the following APIs for runtime setting TX DAC data by band and getting the TX
power measured by target's power detector.
META_3Grf_SetTxDacData_B
META_3Grf_GetPwrDtMeasureResult

Enhancement:
N/A

Bug fixes:
N/A

New features:
N/A

Enhancement:
1. [METAAPP]Provide an adaptive AFC DAC pre-search mechanism for RF chip: AD6548 and the corresponding
CFG file. (AD6548_AFC_Enhancement.cfg)
Bug fixes:

New features:
1.[META_APP][RF] Support BBTXCfg ver 6 data structure format.
2.[META_APP][Factory calibration] Provide FHC(fast handset calibration) with Agilent8960 for "AFC, RX Path
loss, and TX PCL".
3.[META_APP][RF] Provide FHC(fast handset calibration) UTS Pre-Scan mechanism to calculate the log-space
offset required for log-space DAC samples with Agilent8960.
4.[META_APP][WiFi] Support MT5921 EEPROM's format.
5.[META_DLL][RF] Provide the following APIs for setting/getting BBTXCfg6.
META_Rf_SetBBTxCfg6
META_Rf_GetBBTxCfg6
6.[META_DLL][FAT][ULC] The APIs below are no longer supported in ULC(Ultra low cost) projects and will return
error code FT_FAT_ERR_ACTION_NOT_SUPPORT -503).
META_FAT_RemoveDir
META_FAT_GetDriveType
META_FAT_Move
The API below can query if the phone is the ULC project.
META_Check_ULC_FAT_support
7.[META_DLL][CMMB] Expand the API: META_CMMB_GetSignalStrength for new CMMB chips.
8.[META_DLL][WiFi] Add new WiFi chip support: MT5921.

Enhancement:
N/A

Bug fixes:
1.[META_APP][Baseband] Change ADC channel number of MT6239 from 9 to 7
2.[META_APP][RF Tool] Fix the problem of downloading EPSK APC Profile to target's flash.

New features:
1.[META_APP][Update Parameter] Support BT chip MT6611 CAP ID read/write operation.
2.[META_APP][Factory calibration] Add new cfg/ini files for OthelloE transceiver.
3.[META_APP][Factory calibration] Remove PA: Skyworks77340 support.
4.[META_DLL][RF] Change the API interface: META_Rf_StartFdtDL to get DTSParam info of target
5.[META_DLL][RF] The API: META_Rf_QueryMSCapabilityEx2 is used to replace the following two APIs:
META_Rf_QueryMSCapability and
META_Rf_QueryMSCapabilityEx.
Please query if target support the API: META_Rf_QueryMSCapabilityEx2 before invoking these two APIs.
6.[META_DLL][CMMB] Provide the following APIs for controlling target's CMMB module.
META_CMMB_TurnOn
META_CMMB_TurnOff
META_CMMB_SetBand
META_CMMB_AutoScanGetFreq
META_CMMB_AutoScan
META_CMMB_StopAutoScan
META_CMMB_SetFreq
META_CMMB_SelServOnly
META_CMMB_PauseServ
META_CMMB_GetSignalStrength
Enhancement:
N/A

Bug fixes:
1.[META_APP][Update Parameter] Fixed the problem of saving ADC parameters into ini file.

New features:
N/A
Enhancement:
N/A
Bug fixes:
1.[META_DLL][USB] Fix the problem of GetDynamicUSBComPort() might fail in dual-core computers.

New features:
1.[META_APP][Factory calibration] BT auto calibration reduce BT module power on time 2~3 secs.
2.[META_APP][Factory calibration] BT CAP ID auto calibration without BT tester for MT6611.
3.[META_APP][Factory calibration] 33 step AFC slope auto calibration.
4.[META_APP][Audio] Acoustic FIR tuning support to load target frequency response from file.
5.[META_DLL][RF] Add RF ID definition: RF_ID_MTKSOC1, and change the RF_ID_A60111A to
RF_ID_CMOSEDGE
6.[META_DLL][BT] Provide the APIs to support BT power on/off with wait operation settings.
META_BT_POWERON_EX
META_BT_POWEROFF_EX
Note: The API: META_BTPowerOn will not work in 08A W0836 later loads (including W0836),
Please use META_QueryIfFunctionSupportedByTarget_r to query if target support
META_BT_POWERON_EX_r. If yes, please use new APIs to do BT power on/off.
7.[META_DLL][BASIC] Provide APIs to support upload files to target with INI settings mechanism.
META_UploadFilesToTarget
8.[META_DLL][BASIC] Change the L1 RF NVRAM LID checking rules based on target's compile options
(__GSM850__,__EGSM900__,_DCS1800__,__PCS1900__)
when we try to backup and restore calibration

Enhancement:
1.[META_APP][Audio] Display last time FIR tuning settings to support engineers continuously fine tune in case
they did not finish it last time.
2.[META_APP][BASIC] Enhance COM port enumerate procedure when computers have no COM port by default.

Bug fixes:
[BROM_DLL] Fixed can not enter mode issue on MT6229E4 platform.

New features:
N/A

Enhancement:
N/A

Bug fixes:
N/A

New features:
1.[META_DLL][WCDMA] Provides an API for continuous RX test
META_3Grf_ContinuousRX
META_3Grf_ContinuousRX_r
2.[META_DLL][RF] Provide APIs for fast device tuning
META_Rf_StartFdtDL
META_Rf_StartFdtDL_r
META_Rf_StartFdtUL
META_Rf_StartFdtUL_r
META_Rf_QueryMSCapabilityEx2
META_Rf_QueryMSCapabilityEx2_r
3.[META_DLL][NVRAM] Provides composing/decomposing methods for the new structure: ul1cal_txdacData_T_B

META_NVRAM_3G_Compose_txdacData_B
META_NVRAM_3G_Decompose_txdacData_B
4.[META_APP][Factory calibration] APC auto-calibration supports Skyworks 77344 PA.
5.[META_APP][Update parameter] Supports EPSK interslot ramp profile INI file and NVRAM read/write.

Enhancement:
N/A
Bug fixes:
N/A

New features:
Supports MT6239

Enhancement:
N/A

Bug fixes:
N/A

New features:
1.[META_APP][Factory calibration] Supports slope skew and FB DAC auto-calibration for OthelloE transceiver.
2.[META_APP][Factory calibration] APC auto-calibration supports TriQuint TQM7M5008 PA for OthelloE
transceiver.
3.[META_APP][Update parameter] Supports slope skew and FB DAC calibration data update for OthelloE
transceiver.
4.[META_APP][TDMB] Supports Frontier Silicon.
5.[META_APP][TDMB] Supports China band.
6.[META_APP][IMEI] Supports an additional IMEI NVRAM and INI file read/write functions for the Gemini project.
7.[META_DLL][RF] Provides an API for RF special coefficients runtime settings of chip AD6546
META_Rf_AD6546_SetSpecialCoef
8.[META_DLL][TDMB] Provides an API to stop auto-scan and modify the interface for a new chip.(Note: for
W0816 load and later)
META_TDMB_StopAutoScan
9.[META_DLL][FAT] Provides an API to query target drive type.(4 types: NOR, NAND, CARD, EXTERNAL)
META_FAT_GetDriveType
10.[META_DLL][WCDMA] Provides an API to read/write registers.
META_3Grf_SetImmediateBSI
META_3Grf_GetImmediateBSI
11.[META_DLL][Basic] Provides 3 APIs for upper applications to evaluate target performance
META_StartTimer
META_StopTimer
META_GetProcessTime

Enhancement:
N/A
Bug fixes:
1. [META_DLL] Moved some parameter checking codes to appropriate places for the API:
META_ConnectInMetaMode

New features:
1.[META_APP][Audio] Acoustic FIR coefficient runtime setting.
2.[META_APP][Audio] Custom volume runtime setting.
3.[META_APP][Audio] Supports new acoustic FIR coefficient data structure for 08A
4.[META_APP][Factory calibration] APC auto-calibration supports the EDGE CMOS A60111A transceiver.
5.[META_APP][EDGE] Supports EDGE CMOS A60111A transceiver register read/write functions
6.[META_APP] Supports the connection to the target in the META mode for TK6516.
7.[META_DLL][Audio] Provides APIs for online get/set profile and parameter settings.
META_Audio_Get_Audio_Profile_Settings
META_Audio_Set_Audio_Profile_Settings
META_Audio_Get_Audio_Param_Settings_0809
META_Audio_Set_Audio_Param_Settings_0809
8.[META_DLL][NVRAM] Provides composing/decomposing methods for the struct
nvram_ef_btradio_mt6611_struct
and the struct ad6546tx
META_NVRAM_BT_Compose_MT6611Radio
META_NVRAM_BT_Decompose_MT6611Radio
META_NVRAM_Compose_ad6546tx
META_NVRAM_Decompose_ad6546tx
9.[META_DLL][BT] Provides APIs to enable/disable the PCM clock synchronization signal for BT calibration,
which allows users to remove their BT-related callbacks.
META_BT_EnablePcmClockSyncSignal
META_BT_DisablePcmClockSyncSignal
META_BT_RemoveAutoCallback
META_BT_RemoveReceiveHCIDataCallback
10. [META_DLL][NVRAM]Rename
META_NVRAM_Compose_AudioParam_W0748
META_NVRAM_Decompose_AudioParam_W748
to
META_NVRAM_Compose_AudioParam_W0809
META_NVRAM_Decompose_AudioParam_W809

Enhancement:
N/A

Bug fixes:
N/A
New features:
1.[META_APP][Audio] Acoustic FIR tuning support R&S UPV file format.
2.[META_APP][RF] Support ADI AD6548 transceiver.
3.[META_DLL][NVRAM] provide compose/decompose methods for new audio parameter structure.
META_NVRAM_Compose_AudioParam_W0748
META_NVRAM_Decompose_AudioParam_W0748
4.[META_DLL][BT] provide enable/disable online update BT-related parameters from nvram to BT task.
META_BT_EnableNvramOnlineUpdate
META_BT_DisableNvramOnlineUpdate

Enhancements:
N/A
Modem generation Helio Family Chip ID
P10 MT6755
P15 MT6755T
P20 MT6757
P25 MT6757
M20
X20 MT6797
MT6797
X23 D
X25 MT6797T
X27 MT6797X
P35 MT6759
M30
X30 MT6799
M21 N/A MT6763
BB
6223 6223C 6225 6226 6226M 6227 6235 6236 6238
(BT)
Y Y Y Y Y Y Y Y Y
BB Chip Capability
6239 6253 6268 6252 6251 6276 6276M 6921 6255
(FM) (BT, FM) (BT,FM)
Y Y Y Y Y Y Y Y Y
6256 6250 6280 6260 6261
(BT,FM) (BT,FM) (BT,FM) (BT,FM)
Y Y Y Y Y
BB Chip Capability
6516 6573 6575 6577 6589 6572 6582 6571
Y Y Y Y Y Y Y Y
BlueTooth Wi-Fi Mobile TV (TDMB) FM radio
6601 6611 6612 6622 5921 5931 Frontier Telechips 6188BR/C
Silicon TCC3110 R
Paradiso1
T
Y Y Y Y Y Y Y Y Y

Combo Chip
6616 6620 6626
(BT, FM) (BT, FM, (BT, FM)
WIFI)
Y Y Y
Instrument Firmware requirement
Agilent 8960 No special firmware version requirement
Agilent EXT A12.75
Agilent EXM E15.07
R&S CMU200 V5.08
CMW_BASE V3.0.11
CMW_GPRF_Gen,V3.0.11
CMW_GPRF_Meas,V3.0.11
CMW_GSM_Meas,V3.0.10
CMW_TDSCDMA_Meas,V3.0.11
CMW_WCDMA_Gen,V3.0.10
CMW_WCDMA_Meas,V3.0.10
CMW_LTE_Meas,V3.2.50
or
R&S CMW280/500 Setup_CMW_BASE(Release)_3.2.20
Setup_CMW_GPRF(Release)_3.2.21.1
Setup_CMW_GSM(Release)_3.2.20
Setup_CMW_TDSCDMA(Release)_3.2.20.3
Setup_CMW_WCDMA(Release)_3.2.15.12
CMW_LTE_Meas,V3.2.50

WCDMA ListMode NSFT Verified by FW


CMW_BASE,V3.2.51/V3.2.70,CMW_GPRF_Gen,V3.2.40&CMW_GPRF_Meas,V3.2.40&CMW_
WCDMA_Meas,V3.2.70

IQXstream 1.29.0
StarPoint 6010 V2.3.9.4.1_45144_Alpha
StarPoint SP8011 L.1.3.2.0_Plus_0429 以上
Anristu 8820C 22.50 and higher

Anristu 8870 01.00.28:01.08.53a

CTP 3110 No special firmware version requirement

También podría gustarte