Corrosion is the destruction of a metal by a chemical or electro-
chemical reaction within its environment. It is a costly and severe
problem in the dling industry. Because tubular goods are mostly
iron and most driling fluids are water-based, corrosion is inevitable.
‘To aid in providing corrosion protection, special chemicals may be
adved to the fluid system. Pre-weighed corrosion rings are the
most effective way of measuring the corrosivty of the driling fluid
‘ana the benefits of any treatment, Corrosion rings, made from
‘metal similar to that used to make dril pipe, are sized to fit into the
relief groove in the tool joint box. After exposure in the system (usu
ally for a minimum of 80 hours), the rings are retrieved, cleaned,
and re-weighed to within .1 milligram, The weight loss is altriouted
to corrosion and is calculated and reported as Ibityr or mils per
year (MPY). For best results, rings should be re-weighed as soon
as possible after removal from the system and may be returned 10
OFITE for weighing and analysis. OFITE inventories a complete
selection of drill pipe corrosion rings to fit most sizes of drill pipe,
land each ring size is listed in order of best fit
Corrosion coupons (fiat and rod shaped) are mounted on the
appropriate coupan holder and usually placed inside an aging cel
bout sometimes directly inthe flow line at the rig site. Testing is,
bbased upon the same principles as tne corrosion rings. A simple
formula gives a corrosion rate per year.
Because OFITE is an independent
manufacturer, you never have to
worry about how your orders are pri-
oritized. When we receive your order,
wo move fast.
Corrosion Rings and Coupons
Corrosion Coupons:
180-08
180-10
180-12
180-34
Holders:
180-00
180-02
180-08
180-04
%" Diameter
x % (with Holes)
‘Coupon Holder for Flat Coupon, 1" NPT
‘Goupon Holder for Flat Coupon, 2° NPT
‘Coupon Holder for Round Coupon, 2° NPT
Grommets for Coupon Holder, Package of 10
Corrosion Rings:
Part # | Drill Pipe Size and Type Dimensions
2.425" OD
2.125" 1D
2% Internal Flush and
18014 Jy Sim Hole
Sy X-Hole and
31" Full Hole
2.685" OD
180-16 Babs 1D
[ay Internal Flush and
'3¥ Full Hole
2.965" 0D
#180-18 aa
3.156" OD
#180-20 | 4" Full Hole
[4° Internal Flush and
#18022 aye X-Hole 3.227"1D
4 Full Hole and
47 X-Hole and
4" Internal Flush
3,500" 0D
180-24 oun"
Ye Inarnal Flush and
5° X-Hole
4,185" OD
180-26 rea
5%, 54" API Flegular or
Full Hole and 674" APL
Regular
4.590" 0D
180-28 acne)
3.805" OD
#180-30 } 4%" X-Hole
160-32 |5* X-Hole Too! JointoRROSION TEST CELL WITH COUPON
HOLDER, 500 ML, 303 STAINLESS STEEL
4175-40
at x4" x8" (10 10 x 20m)
Sant: 11 Tb 3.02 (5.1 kg)
components:
$175.30 Aging Cell with Valve Stem, 500 mL, 303 Stainless
Stoo!
917545 Inner Cap with Coupon Holder
419004 Grommet, Nylon
(Optional
I7175-40-SP_Spare Parts for Corrosion Test Cell
#175-40 Corrosion Test Cell
TEFLOW® LINER FOR 500 ML AGING CELLS (U.S.
Patent No. 5,152,184)
4175-60
4175-601 Liner, Teflon?
§175.60-2 Piston, Teflon?
4175-608 Plug, Tellor®
175-605 TSerew
#17562 Owing for Plug, Viton®
(O-ring for Lid (Piston), Viton®
175-60.
‘SP Spare Parts for Teflon® Liner
HTHP CORROSION TESTER
#120-700
‘The OFITE HTHP Corrosion Tester is designed to perform corro-
sion tests under elevated temperature and pressure. The device is
‘capable of heating the sample up to 400°F (204.4°C) and applying
up to 5,000 PSI (34.5 MPa). Four specimen can be tested simul-
taneously. All wetted components are made of 316 stainless steel
Size: 25" x 16" x 26" (64 x 41 x 66 cm)
Weight: 215 Ib (97-6 kg)
Crated Size: x 20" x 30" (76 x 51 x 76 em)
Grated Weight: 255 Ib (115.8 kg)
4¥120-700 Corrosion Tester
OFITE offers a variety of payment
‘options, including most major credit
cards. If you are interested in a Net-
80 day account, a credit application is
available in the index.