Documentos de Académico
Documentos de Profesional
Documentos de Cultura
1 B2B 1875 - Requerimiento Ayuntamiento Gestall
1 B2B 1875 - Requerimiento Ayuntamiento Gestall
Estudio en tres dimensiones en un radio de 100m que justifique que la orientación y situación de
los paneles de antenas es la mejor posible desde el punto de vista de reducir al máximo la
exposición a campos electromagnéticos.
Estudio acústico sin mediciones e identificando las fuentes de ruido y los niveles de dba que
emiten. (Se adjunta informe)
ERICSSON - GESTALL
XFERA
1-B2B-1875 – C/ Inmaculada, 9. Mataró, Barcelona. enero 2007
REQUERIMIENTO DEL AYUNTAMIENTO DE MATARÓ
ERICSSON - GESTALL
XFERA
1-B2B-1875 – C/ Inmaculada, 9. Mataró, Barcelona. enero 2007
REQUERIMIENTO DEL AYUNTAMIENTO DE MATARÓ
ERICSSON - GESTALL
XFERA
1-B2B-1875 – C/ Inmaculada, 9. Mataró, Barcelona. enero 2007
REQUERIMIENTO DEL AYUNTAMIENTO DE MATARÓ
SERVEI DE CIUTAT SOSTENIBLE
SECCIÓ LLICENCIES D’ACTIVITATS
Xfera Moviles S.A está instalando la mejor tecnología disponible del mercado,
técnica y económicamente viable, en cuanto a la tipología y características de los
equipos a implantar para conseguir la máxima reducción del impacto visual y
ambiental, como en este caso antenas mimetizadas tipo “shut” y equipos de
exterior de dimensiones reducidas.
ERICSSON - GESTALL
XFERA
1-B2B-1875 – C/ Inmaculada, 9. Mataró, Barcelona. enero 2007
REQUERIMIENTO DEL AYUNTAMIENTO DE MATARÓ
SERVEI DE CIUTAT SOSTENIBLE
SECCIÓ LLICENCIES D’ACTIVITATS
En el caso del presente estudio, se garantiza que no existe riesgo para las
personas de tránsito dada la altura de las antenas a emplazar, siendo la distancia
más desfavorable de los paralelepípedos de seguridad a la cubierta de 2,82
metros.
En cuanto a los edificios colindantes se confirma que no están afectados por las
emisiones electromagnéticas dado que su cota respecto a las antenas es inferior
al nivel de la cubierta del emplazamiento en cuestión.
ERICSSON - GESTALL
XFERA
1-B2B-1875 – C/ Inmaculada, 9. Mataró, Barcelona. enero 2007
REQUERIMIENTO DEL AYUNTAMIENTO DE MATARÓ
SERVEI DE CIUTAT SOSTENIBLE
SECCIÓ LLICENCIES D’ACTIVITATS
ERICSSON - GESTALL
XFERA
1-B2B-1875 – C/ Inmaculada, 9. Mataró, Barcelona. enero 2007
9. CARACTERÍSTICAS DE EQUIPO.
ESTUDIO ACÚSTICO
1-B2B-1875
C/ INMACULADA, 9
MATARÓ, BARCELONA
El Técnico,
1. OBJETIVO.
2. DESCRIPCIÓN ACTIVIDAD.
4. NORMATIVA.
5. ENTORNO.
7. DESARROLLO DE RESULTADOS.
8. CONCLUSIONES Y RECOMENDACIONES.
9. CARACTERÍSTICAS DE EQUIPO.
El objetivo del presente informe es la determinación del nivel ambiental exterior debido a la
actividad de una estación base de Telefonía Móvil situada en la C/ Inmaculada, 9, de Mataro,
Barcelona.
Concretamente, se refiere al cumplimiento de lo que establece la Ordenanza de
Reglamento de Actividades de Mataró.
2. DESCRIPCIÓN ACTIVIDAD.
La Estación Base objeto de este estudio está ubicada en la cubierta del edificio de
viviendas situada en la C/ Inmaculada, 9, de Mataró, Barcelona. El edificio adyacente supera
escasamente la altura del edificio donde se encuentra la Estación Base y en ningún caso se
encuentran viviendas en la misma cota que la instalación. Hay que resaltar que la instalación
se encuentra en una cubierta transitable de uso no continuado.
4. NORMATIVA.
Ruido:
Los niveles de evaluación de la inmisión sonora máxima admitida serán los indicados en
los anexos de la Ley 16/2002, de protección de la contaminación acústica, según la tabla
siguiente:
Niveles de vibraciones máximos admisibles en el interior del edificio serán los indicados en
el anexo 7 de la Ley 16/2002, de protección contra la contaminación acústica, según la tabla
siguiente:
Valores límite de inmisión
Zona de
LAw en dB(A)
sensibilidad
Dia Noche
A,alta 60 50
B, moderada 65 55
C, baja 70 60
5. ENTORNO.
Ruido:
Por lo tanto, al tratarse la zona de objeto del presente estudio de una zona de viviendas
con locales, la consideraremos una zona de sensibilidad B, la actividad en estudio se realiza
durante todo el día (24h) y se encuentra en el exterior, nuestros valores límite serán:
Ambiente exterior
Zona de Valores límite de inmisión
sensibilidad LAr en dB(A)
Día Noche
B, moderada 65 55
Vibración:
Por lo tanto, al tratarse la zona de objeto del presente estudio de una zona de viviendas
con locales, la consideraremos una zona de sensibilidad B, nuestros valores límite serán:
Vibración.
Los ventiladores de las RRU, según sus especificaciones técnicas, garantizan una presión
sonora nula, mientras para el RBS3518 garantizan una presión de 5 Bel, lo que equivale a 50
dB, trabajando a una frecuencia de 65 Hz. A continuación las especificaciones técnicas
aportadas por el fabricante:
Acoustic Noise
The acoustic noise power levels at full output power and measured according to ISO
3744 are:
Main Unit sound power level during operation: < 4.5 Bel LwA (at +25º C)
< 5.0 Bel LwA (at +40º C)
No acoustic noise from any of the RRUs.
7. DESARROLLO DE RESULTADOS.
Al pasar de dB a dBA nos quedan 23,8 dBA, añadiendo el factor de corrección tenemos un
LAeq = 26.8, nivel muy inferior al valor límite marcado por la Ordenanza de Mataró.
El Técnico,
Ficha Mástiles
SlimSite Broadband
3 m – 4 m- 6 m – 8 m
Edición 1.0
Pag. 1 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
400 mm
1600 mm
1002 mm
D = 250 mm
Pag. 2 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
400 mm
D = 250 mm
1600 mm
D = 350 mm 1002 mm
TMAs Cover
integración TMAs
Salida de
Cables
Pag. 3 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
SISTEMAS DE ANCLAJE
Pilar de
casetón
Módulo anclaje
Bancada a pilar
Pilar
Módulo-ménsula
anclaje a casetón
Pag. 4 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
400 mm
1600 mm
D = 250 mm
773 mm
Cajón-cover
(integración del sistema
abatimiento)
851 mm
571 mm
155 mm
Pag. 5 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
SISTEMAS DE ANCLAJE
Pilar de
casetón
Módulos-riostras
anclaje a casetón
Bancada
Módulo anclaje
a pilar
Pilar
Anclaje a casetón
Distancia pared-mastil: 267 mm
Peso módulos: 72 Kg
Nº anclajes/riostras: 2
Pag. 6 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
400 mm
1600 mm
D = 250 mm
773 mm
2000 mm
Cajón-cover
(integración del sistema
abatimiento)
851 mm
571 mm
155 mm
Pag. 7 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
SISTEMAS DE ANCLAJE
Módulos-riostras Pilar de
anclaje a casetón casetón
Bancada
Módulo anclaje
a pilar
Pilar
Anclaje a casetón
Distancia pared-mastil: 267 mm
Peso: 72 Kg
Nº anclajes/riostras: 2
Pag. 8 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
400 mm
1600 mm
D = 250 mm
773 mm
2000 mm
2000 mm
Cajón-cover
(integración del sistema
abatimiento)
851 mm
571 mm
155 mm
Pag. 9 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
SISTEMAS DE ANCLAJE
Pilar de
casetón
Bancada Módulos-riostras
anclaje a casetón
Módulo anclaje
a pilar
Pilar
Pag. 10 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
Accionamiento Cilindro-pistón
manual de la bomba
Cajón-cover
(integración del sistema
abatimiento)
Bomba hidráulica
Cajón-Cover
625 x 623 x 1000 mm
Desmontable para facilitar las
operaciones de abatimiento
Pag. 11 of 12
Siemens S. A. 2005 All rights reserved
Ficha Mástiles SlimSite Broadband
New Generation Antennas
Cover
integración TMAs
D = 350mm
TMAs
Pag. 12 of 12
Siemens S. A. 2005 All rights reserved
RBS 3518 Product Description
1 Introduction
The RBS 3518 is an outdoor RBS in the powerful and flexible Main Remote family
from Ericsson. The RBS has a similar architecture as the other RBS 3000 products.
The RBS can provide macro coverage and/or in-building coverage for up to 6
sectors with 1 carrier or up to 3 sectors with 2 carriers.
Standard
Antenna/Feeder
Optical fiber
0 -15 km
Star or cascade
Remote
Wall, pole or tower top Main Unit 3518
No active cooling Outdoor: Wall, pole, or floor
Antenna tilt control
Indoor: 19” rack in any cabinet
Figure 1. The RBS 3518 consisting of the Main Unit and up to six RRUs
1/22101 - FGC 101 0067 Uen Rev B 2006-07-11 © Ericsson AB 2006 4 (38)
Commercial in confidence
RBS 3518 Product Description
A traditional macro 3-sector site (below left) has a standard RBS cabinet (e.g. RBS
3202) plus 3 sector antennas. Two coaxial feeder cables (for RX diversity) are
needed to join each sector antenna to the RBS cabinet. TMA/ASCs may be installed
near the antenna to compensate for feeder loss on the uplink. With Main-Remote
(below right), the entire radio for a sector is placed near the corresponding antenna.
No TMA/ASCs are needed.
Sector
Sector Antenna
Antenna
RRU
TMA/
ASC
Optical Fibers
Coax
Feeder RBS 3518
Macro Main Unit
RBS
This makes easier site acquisition feasible leading to faster network roll out and
faster revenues.
Compared with a Micro or Pico base station the pooled capacity, where base band,
control and transmission, are shared between the sectors.
The OPEX will be reduced compared to a traditional Macro site due to:
• Reduced power consumption. Up to 40% less energy is required.
• Lower site rent.
• Less need for site cooling.
1/22101 - FGC 101 0067 Uen Rev B 2006-07-11 © Ericsson AB 2006 5 (38)
Commercial in confidence
RBS 3518 Product Description
• When exchanging the batteries there will be fewer and less expensive
batteries.
Typical 3-sector macro sites require six thick coaxial feeders to connect the
antennas to the RBS cabinet. The loss of radio performance in the feeders is a
major issue, affecting both coverage and capacity. Longer feeders increase the loss.
While a TMA/ASC can compensate for feeder loss on the uplink, already at 30m a
7/8” feeder cuts output power (downlink) by ~35%.
Main-Remote solves the feeder loss problem completely by enabling the entire radio
to be placed adjacent to the antenna where it is connected through an optical fiber
to the Main Unit.
The output power efficiency gain from avoiding feeder loss in the Main-Remote
concept is used in RBS 3518 partly for radio performance gains, and partly to help
operators solve challenging site installation problems.
Since Main-Remote is ideal for sites with long feeder runs, the output power can be
reduced somewhat compared to a macro RBS, while still providing a sufficient level
at the antenna. Table 1 shows the break-even point lengths for a 7/8” feeder for
different powers from a traditional Macro RBS.
Output Macro 20/30 W
power @ Main-Remote 10 W
full
1/2
1/4
break-even point
1/8
.
. Distance to
. antenna
With Without
TMA/ASC TMA/ASC
20 W 32 m 38 m
30 W 59 m 65 m
A feeder loss of 0.0629 dB/m for the 7/8” feeder has been used in the calculations.
1/22101 - FGC 101 0067 Uen Rev B 2006-07-11 © Ericsson AB 2006 6 (38)
Commercial in confidence
RBS 3518 Product Description
No feeder loss combined with the lower output power gives RBS 3518 much lower
power consumption than other macro RBS 3000 products. This leads to much
smaller and less heavy RRUs with increased MTBF, enabling easier antenna
placement as described below. The main unit is also small and light, providing a
solution for challenging sites. Furthermore, no thick feeders or TMA/ASCs are
needed when mounted alongside the antenna.
With the Main-Remote concept, it becomes easier to place antennas at far greater
distances from each other, and from the main RBS cabinet (Main Unit).
This provides more antenna placement options, with two key benefits:
It is the lossless optical fiber link from each RRU to the Main Unit that enables the
long distances mentioned above, plus the small, lightweight RRU that can be placed
near the antenna.
Antennas with
RRUs optimally
placed
All RBS 3518 HW is specially designed to be small and light, easy to carry on site.
Traditional lifting equipment required for standard macro base stations is not
needed. The Main Unit can be installed in places too small for standard macro base
stations, including spots to which a larger/heavier macro RBS cannot be
transported.
1/22101 - FGC 101 0067 Uen Rev B 2006-07-11 © Ericsson AB 2006 7 (38)
Commercial in confidence
RBS 3518 Product Description
• EN 60 950/IEC 950
• EN 60 215/IEC 215
• EN 60 529/IEC 529
Environmental Requirements
The requirements for climatic/mechanical environment are based on ETSI standard
ETS 300 019 Classification of Environmental Conditions and IEC 721.
Storage Requirements
The RBS 3518 complies with ETS class 1.2 Weather Protected, Not Temperature
Controlled Storage Locations in ETS 300 019-1-1.
Transportation Requirements
The RBS 3518 complies with ETS class 2.3 Public Transportation in ETS 300 019-
1-2.
Earthquake Protection
Reliable function during seismic exposure: Test method according to IEC/EN 60
068-2-57.
In-Use Requirements
The RRU 11 2110 is designed for normal operation in the climate conditions of class
4.1 of ETS 300 019-1-4 according to IEC/EN 721-3-4 (extended to 45º C).
The RRU 22 xx20 is designed for normal operation in the climate conditions of class
4.1 of ETS 300 019-1-4 according to IEC/EN 721-3-4 (extended to 50º C).
The Main Unit RBS 3518 is designed for normal operation in the climate conditions
of class 4.1 of ETS 300 019-1-4 according to IEC/EN 721-3-4 (extended to 45º C).
1/22101 - FGC 101 0067 Uen Rev B 2006-07-11 © Ericsson AB 2006 21 (38)
Commercial in confidence
RBS 3518 Product Description
Ingression
The Main Unit RBS 3518, the RBS 11 2110 and all RRU 22 variants are protected
for the ingression of water and dust and fulfils the IP55 requirements according to
the standard IEC/EN 60 529.
The indoor specified RRU 11 2103 is protected for the ingression of water and dust
and fulfils the IP20 requirements according to the standard IEC/EN 60 529.
Acoustic Noise
The acoustic noise power levels at full output power and measured according to ISO
3744 are:
Main Unit sound power level during operation: < 4.5 Bel LwA (at +25º C)
< 5.0 Bel LwA (at +40º C)
12
All temperatures for the outdoor units are specified to handle an additional solar radiation of 1120 W/m2
1/22101 - FGC 101 0067 Uen Rev B 2006-07-11 © Ericsson AB 2006 22 (38)
Commercial in confidence